Engineering Commons^™

Reactions Of Para-Nitroaniline With Acid Chlorides, Stephen Alan Zapoticzny

Theses

Para-nitroaniline was reacted with acid chlorides forming amides. Their structures were elucidated by the performance of various spectral analyses.

A Kinetic Study Of Lysine And Lysine Derivatives, Stephen Joseph Stanley

Theses

The kinetics of the reaction of iodoacetamide with lysine, polylysine, N-α-Acetyl lysine, and N-ε-Acetyl lysine, have been studied. The investigation was done at 23° C ± 123° C, as a function of pH, and concentration. In all cases it was noted that the rate of reaction increased as the pH increased. The rate data was analyzed in order to obtain the second order rate constants. In addition, the effects of the reactive site's environment on the rate was demonstrated.

The Use Of A General-Purpose Heat Transfer Code For Casting Simulation, William Carl Erickson

Electrical and Computer Engineering ETDs

The practical use of numerical techniques in simulating casting solidification dictate that a general purpose heat transfer code be used and that results be obtained in an easy-to-analyze format. Color film plotting routines were developed for use with NASA's CINDA-3G heat transfer code; the combination of which meet the above criteria. The subroutine LQSLTR written for SINDA, the successor to CINDA-3G, was verified by comparing calculated results obtained using LQSLTR with those obtained using the specific heat method for handling the heat of fusion. Excellent agreement existed when similar data was used. When the more restrictive requirement of a 1° …

Siganal-A Modular Signal Analysis Program, Ramon Anthony Tenorio

Electrical and Computer Engineering ETDs

Many Scientists and Engineers who record experimental data often require that their data be analyzed via various digital techniques in the shortest possible time. The Signal Analysis Program (SIGANAL) described in this report is a modular program that:

1. Provides multiple function analysis in one computer run.

2. Provides a method of input that parallels the users analysis requirements.

3. Provides state-of-the-art digital techniques for Frequency domain analysis such as Power Spectral Densities, Cross Spectral Densities, Transfer Functions and Coherence estimates.

4. Requires less than 30000₁₀ words of central memory.

Safeguards Considerations For A Htgr Nuclear Fuel Cycle, Philip G. Johnson

Nuclear Engineering ETDs

Given that the prime objective of safeguards for special nuclear materials (SNM) is nonproliferation of nuclear weapons, it is logical that safeguards priorities should be commensurate with the relative suitabilities of the various SNM forms in existence for application in nuclear explosives. The SNM forms in each reactor fuel cycle, for example, should be screened and ordered according to their relative suitabilities for such misapplication. Significant considerations in assigning protection priorities include the relative suitabilities based on materials characteristics, inherent protection features of the mateerials or the processing of the SNM forms, the quantities of these materials in existence, and …

A Prompt D-D Neutron Calibration Of A Plastic Scintillator Detector, Dal H. Jensen

Nuclear Engineering ETDs

ABSTRACT

A new approach to the measurement of the neutron yield of low intensity (~ 2 x 10 neutrons/pulse) 0-0 neutron generators in a single pulse is described. A cylindrical (20.32 cm radius by 20.32 cm height) scin­tillator of Pilot-Bis optically coupled to a Phillips 57AVP photomulti­plier with a 20 cm diameter photocathode. The light pulse resulting from the neutron burst is fed into a voltage integrator calibrated in neutrons/ count.

The initial calibration of the stable neutron generator used in the scintillator calibration was performed using a silver activation detector (PT-502) designed by LASL. The data obtained for the …

Methods For Calculating Energy Deposition Using Coupled Neutron-Gamma Ray Transport, Lewis Douglas Rigdon

Nuclear Engineering ETDs

In radiation damage problems, it is desirable to know not only the neutron and gamma ray fluxes but also the energy deposition due to those fluxes. Following the recent availability of coupled neutron-gamma ray, multigroup-multitable cross sections and associated fluence-to-KERMA factors, an automated method has been developed for obtaining the energy deposition in a material region due to local neutron and gamma ray fluxes. Cross section sets which combine neutron and photon transport as well as a production matrix for neutron-induced gamma rays are used in the transport calculation. Thus in one discrete ordinates transport calculation, the energy deposition from …

A Hydro-Quality Model To Predict The Effects Of Biological Transformations On The Chemical Quality Of Return Flow, V. A. Narasimhan

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

A computerized mathematical model has been developed to simulate the system hydrology and water-salinity (as indicated by seven major ions constituting the salt) of a river basin, in which irrigation is the major beneficial water user. The overall system simulation model consists of three submodels: (1) a general hydrologic submodel programmed on a hybrid computer; (2) a chemical submodel to predict the quality of percolated water through the soil profile; and (3) a biological transformation submodel in respect of microbial nitrogen transformations, which is utilized by the chemical submodel. Both the chemical and biological submodels are programmed on a digital …

Lagoon Effluent Polishing By Soil Mantle Treatment Using Various Utah Soil Types, Roger Scott Tinkey

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The purpose of this paper is to investigate the effectiveness of four Utah Great Basin soil types in removing particular chemical constituents and select enteric organisms from a sewage lagoon effluent. Sewage taken from the secondary oxidation pond in Logan, Utah was applied daily to lysimeters which allowed samples to be recovered at 7.6 and 38.1 centimeter soil depths. The texture of the soils was the most important physical property affecting their removal capacity. Drainage Farm soil (clay) provided the best bacteriological and overall chemical removal with Nibley (silty clay loam) second, then Draper (sandy loam) and Parleys (silty loam) …

Examination Of A Non-Point Source Loading Function For The Mancos Shale Wildlands Of The Price River Basin, Utah, Stanley L. Ponce Ii

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

During 1974 and 1975 a diffuse source salinity study was conducted in east-central Utah. The specific objectives of this study were (a) to determine the role of overland flow on salt movement for selected land types, (b) to determine the relative magnitude of surface erosion associated with overland flow and its role in the salt release process, and (c) develop a non-point source loading function to predict salt production from diffuse sources.

The Rocky Mountain Infiltrometer technique was utilized to study the process of overland flow and its relation to salt transport. A reconnaissance survey was made during the 1974 …

The Status Of Metric Conversion In Industrial Education Programs In Utah With Recommendations For Statewide Training Programs, Thomas J. Brames

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The purpose of this study was to obtain information from Industrial Education teachers in Utah concerning their feelings and attitudes toward conversion to the Metric System in the United States and to determine their present familiarity with that system. The study was also designed to identify potential problem areas which would tend to influence educational programs on the Metric System for Industrial Education teachers in Utah.

A select sample of four-hundred twenty-three Industrial Education teachers representing over twenty occupational areas was chosen as the population for the study. Two-hundred ninety-seven usable questionnaires (70.2 per cent) were returned and tabulated as …

Inhibitors And Retarders For The Free Radical Polymerization Of Alpha-Methylstyrene, Alexander Accetta

Masters Theses

No abstract provided.

An Experimental Investigation Of A Cold Jet With Solid Centerbody Emitting From A Flat Plate Into A Subsonic Free Stream, Danny K. Livingston

Mechanical & Aerospace Engineering Theses & Dissertations

A study of the influence of a solid center body on lift loss and pitching moment has been conducted. It has been well established that a round free jet emitted from a flat plate at right angles to a cross flow causes an induced pressure distribution on the plate which adversely affects the lift and pitching stability of the flat plate.

This investigation has employed a 2.58 - cm diameter round jet with a 1.91 - cm diameter solid rounded core in order to modify the induced flow field and attempt to reduce the lift loss and pitching moment. Preliminary …

A Method For Improving The Accuracy In Phase Change Heat Transfer Data Through Increased Precision In Thermophysical Property Determinations, John Philip Drummond

Mechanical & Aerospace Engineering Theses & Dissertations

Wind tunnel model materials typically have thermophysical properties that vary with both position and temperature. A numerical study using a finite difference representation of the heat conduction equation has been performed on several of these model materials to determine their thermal response under a specified heat loading. This study has confirmed the feasibility of using an effective thermophysical property to account for the existence of variable thermal properties when a model undergoes aero­ dynamic heating. The effective property, when used in the reduction of phase-change heat transfer data, forced agreement of the actual transient behavior of a model with the …

Effect Of Rod Gap Spacing On A Suction Panel For Laminar Flow And Noise Control In Supersonic Wind Tunnels, William D. Harvey

Mechanical & Aerospace Engineering Theses & Dissertations

It has been well established that the test section flow of conventional supersonic and hypersonic wind tunnels contains significant levels of disturbances. These disturbances are mainly caused by the radiation of aerodynamic noise from the turbulent boundary layer on the nozzle walls. This noise level has been shown to have an important effect on boundary layer transition measured on models in tunnels. The purpose of this thesis is to present results of a coordinated experimental and theoretical study of a sound shield concept which aims to provide a means of noise reduction in .the test section of supersonic wind tunnels …

Analysis Of Spread Multi-Jet Vtol Aircraft In Hover, Leroy F. Albang

Mechanical & Aerospace Engineering Theses & Dissertations

An investigation of VTOL aircraft lift losses in hover has been conducted to evaluate a method for a simplified test technique. Three flat plate models were tested to determine their usefulness in predicting hover characteristics by comparing results between plate and three­ dimensional models. Attempts to correlate the out of ground effect results for the plate models with the empirical expression for calculating jet-induced loads were successful for the models which used engine simulators producing efflux characteristics similar to the three­ dimensional model engines. Data for the model using engine simulators with characteristics unlike those of the three-dimensional model simulators …

Silver Centers Induced In Borate Glasses: Esr And Optical Studies, Hadia El Zayyat

Archived Theses and Dissertations

No abstract provided.

Alcohol Assisted Hydrocarbon Fuels: A Comparison Of Exhaust Emissions, Power Output And Fuel Consumption Using Static And Dynamic Engine Test Facilities, Dwight J. Bushnell

Theses and Dissertations

America’s energy crunch— something new for a country that has been used to great affluence. America’s smog— an eye stinging, lung burning situation which the Environmental Protection Agency has "promised" to rectify. These are two outstanding problems that face the engineer and scientist of today. The end of the era of cheap gasoline has brought the beginnings of a quiet revolution to Detroit: an improvement in the efficiency, economy and emission level of the American automobile. Word has penetrated to the automotive engineers that the emissions level, fuel economy and automobile safety are the prime design considerations for the automobile …

Determination Of The Most Economically Feasible Method For High Volume Machining Of A Discharge Port In A Powder-Metal Compressor Cylinder, Perry W. Carter

Theses and Dissertations

The purpose of this study was to ascertain the most economically feasible method for high volume machining of a discharge hole in a power metal compressor cylinder.

Electron Trajectories In The Vicinity Of A Wire Mesh Placed Parallel To A Perfectly Conducting Ground Plane, Donald E. Jones

Electrical and Computer Engineering ETDs

In the System Generated Electro-Magnetic Pulse (SGEMP) simulator, a flux of high energy photons are introduced into a vacuum chamber. These photons strike the walls of the chamber, producing compton electrons. As this effect is not present in the environment to be simulated, it is desirable to prevent these electrons from entering the working volume of the chamber.

Stresses At The Tips Of Cracks Emanating From The Loaded Fastener Hole, Venkataraman Shivakumar

Mechanical Engineering ETDs

Stress-intensity factors, K, are obtained at the tips of radial cracks emanating from the boundary of an internal circular fastener hole in a plate loaded by a pin or rivet that just fills the hole and is pulled in the negative y-direction, in the plane of the plate. Solutions are obtained in a conformally mapped region in the form of series for different crack lengths and are based on the Muskhelishvili formulation in the two-dimensional theory of elasticity. The method presents a general technique for determining K for k symmetrically located radial cracks of equal length for a wide variety …

Some Structural Aspects Of Ni2+ In Potassium Haloborate Glasses, Samia Sidhom

Archived Theses and Dissertations

No abstract provided.

Design Of A Yig-Tuned Oscillator, Tien Liang Jin

Theses

A technique for designing YIG (yttrium-iron garnet) tuned transistor oscillators, tunable over the range of frequencies from 500 to 950 MHZ, is presented. The approach taken differs appreciably from that used in the design of conventional LC-tuned oscillators. One major difference is that the YIG tuning mechanism is electrically controlled. The YIG tuning element is treated as a single unit and is not resolved into an equivalent LC circuit. Instead, a direct method using reflection coefficients measured at network terminals to characterize various design stages is applied. The transistor is also characterized by reflection and transmission coefficients, i.e., S-parameters. Thus …

The Design Of Optimal And Sub-Optimal Feedback Controllers For Discrete Systems, Chaw-Kwei Hung

Electrical and Computer Engineering ETDs

This dissertation is divided into two parts. The first part presents a method for the design of time-optimal feedback controllers for linear discrete stable systems with a single bounded input. In the second part, a method is presented for the design of time sub-optimal feedback controllers in which a tight upper bound on the time sub-optimal feedback controller's performance for state points in a convex polyhedron can be guaranteed. Two sets related to the reachable set--the zero control set and the cylindrical set--are formulated. Both are helpful in the realization of the time-optimal feedback controller. The cylindrical set is composed …

Subsolidus Equilibria And Metastable Phase Development In The System Zro₂-Al₂O₃-Sio₂, Charles Christopher Sorrell

Bachelors Theses

"Subsolidus equilibria in the low silica portion of the system ZrO₂-Al₂O₃-SiO₂ were studied by X-ray diffraction of quenched samples fired at 1300°, 1400°, and 1480°C. Samples prepared as powders from combinations of a-Al₂O₃, Al(OH)₃, silicic acid, ZrO₂, and kaolinite reacted very slowly at 1300° and 1400°C and the trends toward equilibria are not apparent. A mixture of zircon and Al(OH)₃ reacted slowly at 1480°C to form mullite and ZrO₂, indicating that the latter phases are the stable assemblage rather than zircon and alumina. A gel prepared from aluminum nitrate, zirconyl nitrate, and colloidal silica reacted at 1480°C to form alumina, …

An Analysis Of The Role And Effectiveness Of The Contract Manager In Government Contracting., Daniel Martin Wilson

Masters Theses

"The contract manager in carrying out the contract management function of government contracting represents a vital element of the procurement process. He is charged with responsibilities for assuring that a product or service is delivered in a timely manner and is of specified quality, quantity and price. However, research and a survey of his role reveal that he is regarded a s a functional specialist, guided by a mass of procedural requirements, and he is not included in the managerial hierarchy of contracting.

Because his role does not accord him the status or authority commensurate with the importance of the …

Estimation Of Vehicle Transfer Functions., Leonard Francis Laskowski Iii

Masters Theses

"This study is an investigation of several techniques used to estimate lateral control models for vehicles. The lateral control model that was identified related steering wheel angle input to lateral acceleration output. Two different order models were identified, one a biquadratic and the other a fourth order lowpass system with second order numerator dynamics. The two main approaches investigated were:

1) Regression analysis

2) Fast Fourier Transform Techniques These techniques were chosen because of their inherent immunity to noise.

A CSMP simulation of all identified models was then made to determine their validity. These checks were made using laboratory data …

An Automated Design Of Reinforcement Concrete Building Structures, Mehdi Bahremand

Retrospective Theses and Dissertations

The purpose of this paper is to present the development and use of a computer program to perform an automated structural design of two dimensional static concrete structural systems. The structural systems considered herein are composed of reinforced concrete beams and columns connected by rigid joints. Structural systems composed of large numbers of joints and members may be analyzed by using the developed program. The paper presents the development of the structural analysis using the displacement method and matrix techniques and the development of the concrete axial-moment interaction criteria. This criteria is based on the ultimate strength design using the …

Computer Generated Holograms, Jeffrey James Gierloff

Retrospective Theses and Dissertations

Computer generated holograms have been made practical by the introduction of fast Fourier transform algorithms. The following discussion will brief the reader on the theory and concepts of optical holograms, the computer hologram, and the analogies of the computer hologram to its optical counterpart. Some of the programming aspects of the computer holograms are presented. The results of the generation of several computer holograms are presented, and conclusions drawn as to the effectiveness of this technique. Finally, some of the practical uses and advantages of the computer hologram are discussed.

A Search For A Computer Graphics System For The Small-Scale Computer User, Larry D. Holley

Retrospective Theses and Dissertations

This paper presents a review of several computer graphics systems. The need for a universal graphics language is discussed and some typical languages are investigated. Several types of display terminals have been researched and their advantages and disadvantages have been listed. A vector plotting routine has been programmed on a microprocessor system as a part of the research. A description of the vector plotting system is included in this paper. The system could be a "modular unit" for general purpose use with any alphanumeric raster-scan display terminal and a simple graphics language.