Engineering Commons^™

A Cmos Digital Temperature Sensor For Asic Vlsi Standard Cell Design, Chih-Ta Sung

Theses

This thesis describes the design of a CMOS digital temperature sensor cell including the physical layout database.This cell is designed for implementation within an ASIC VLSI chip as a standard cell . The digital temperature sensor can trigger an alarm signal and turn off power for preventing fatal damage in the VLSI chip if overheating occurs.A digital output also permits measurement of temperature over the 0 - 120°C range with ±3.4°C accuracy using standard VLSI foundry processing. Two sensing elements are implemented in a differential mode within the temperature sensor cell. An operational amplifier is used in the successive approximation …

Use Of The Lms Algorithm In Ecg Analysis, Xiaohua Yang

Theses

The purpose of this thesis is to develop an IBM PC-AT based system to effectively process electrocardiogram (ECG) signals. Adaptive filter theory is used to implement a noise cancellation system (adaptive noise canceller), which adaptively cancels the ECG signals resulting in real ECG noise. The adaptive process is based on the well known least-mean square (LMS) algorithm.

The noise canceling system is software based. Several programs have been written, which include analog to digital converter control, data acquisition and storage, data retrieval, adaptive filtering and digitized data graphics.

The thesis presents numerous computer experiments. The performance of the adaptive noise …

Experimental Evaluation Of J-Integral For Concrete Subjected To Impact Loading, Naishan Zhang

Theses

This thesis presents an experimental evaluation of J-integral for concrete subjected to impact loading. Twenty four three-point bend specimens with two different thicknesses and mid-span notch lengths were tested under impact velocities of 167.22 in/sec (424.74 cm/sec) and 261.78 in/sec (664.92 cm/sec). Multi specimen method was used to analyze and estimate J_I and its critical J^-Ic values. Effects of specimen thickness and impact velocity on J^-Ic values were observed and discussed. Evaluation of J^-Ic Values from the experimental results of this study indicated that can be characterized as a material constant even under different impact velocities. …

Progressive Transmission Of Images Using Pyramidal Structure, Chin-Hua Hsu

Theses

A progressive image transmission scheme based upon Laplacian pyramid structure is used for image coding over low-bandwidth channels. The filtering and differential pulse code modulation (DPCM) methods of image coding are generalized to allow quantization of the Laplacian images. Filtering is performed with a local, symmetric weighting function. The three different quantizers, (1) scalar quantizer, (2) memoryless vector quantizer (VQ), and (3) finite state vector quantizer (FSVQ), are used here to compare the results. In the receiver end, the image can be reconstructed using reverse procedure. The reconstructed image is not the same as the original image because of the …

Design Of A Lan Based Data Acquisition System For Sensor Applications, Krishna Murthy Uppunda

Theses

This thesis presents the design of a local area network (LAN) based data acquisition system for sensor applications. The circuit designed forms the robotic LAN (RLAN) interface between the sensor IC nodes and the ARCNET network. The RLAN network uses two packet protocols. The sensor data request (SDR) packet is received by the sensor IC nodes and the sensor transmits the sensor data (SD) packet. The RLAN interface provides a two way communication between the sensors and the ARCNET network. Whenever an ARCNET node receives the SDR packet, it stores the packet temporarily in a 1k RAM buffer. The RLAN …

Using Living Materials To Intervene In The Natural Succession Process To Accelerate The Re-Development Of A Self-Sustaining Ecosystem That Has Been Damaged By Human Intervention, Eric Jorgensen

Materials Engineering

No abstract provided.

Mobile Deployable Bases And Ports: A Study For Interim Requirements, William Glenn Moore

Marine Affairs Theses and Major Papers

Logistics is an age old problem that has been the key to the greatest victories and defeats in history. Maritime support of wartime land campaigns as well as conflicts at sea, has been the answer to that problem even as far back in history as the ancient Greek Empire. Throughout the ages however the lesson that seems to be learned and relearned, the hard way, is that of logistic support. Today the United States is faced with what, to some seems to be an overwhelming problem in logistic support overseas, particularly in the maritime transportation and support arena. The U.S. …

Organ Doses In Routine Radiographic Procedures, Yang Han

Theses and Dissertations

There is general agreement that the extent of the risk from x-ray examination is related in some way to the radiation dose. As the dose increases, the likelihood of significant biological effects also increases. If a clear correlation between dose and effect is to be established, a convenient and reasonably accurate method of estimating patient’s absorbed doses during common radiographic examinations will be highly needed. A simple method is developed in this project to determine the two important parameters e exposure at skin entrance (ESE) and half value layer (IIVL), which is essential to get reasonably accurate estimates of absorbed …

A Pulsed Field-Gradient System For Nuclear Magnetic Resonance Diffusion Experiments, Saumil Shirish Mehta

Masters Theses

"The construction and performance of a system to generate pulsed magnetic field gradients for use with a commercial superconducting NMR spectrometer for the purpose of molecular self-diffusion measurements is described. Types of coils that provide linear field gradients are discussed. The design and construction of a conventional Helmholtz pair is outlined. A procedure to estimate the magnitude of the field gradients generated by the Helmholtz coils is explained. The design of a circuit to generate fast current pulses using a power MOSFET has been detailed and compared with a functionally similar circuit using bipolar power transistors. The performance of the …

Speech Synthesis Using A Digital Modulation Scheme On The Ibm Personal Computer, John Glenn Wallace

Masters Theses

"Previously the primary output interface that users of personal computers have had available to them were limited to the crt or the printer. This paper presents a method for implementing a voice synthesizer on an IBM personal computer using only the hardware already contained in the personal computer. Presented is a modulation method which can be used with the IBM to obtain good quality voice output. The method consists of 3 parts, 1) sampling and recording the voice, 2) processing and filtering these samples and 3) using these processed samples to drive the speaker. A description of the hardware used …

Parallel Architectures For Solving Combinatorial Problems Of Logic Design, Phuong Minh Ho

Dissertations and Theses

This thesis presents a new, practical approach to solve various NP-hard combinatorial problems of logic synthesis, logic programming, graph theory and related areas. A problem to be solved is polynomially time reduced to one of several generic combinatorial problems which can be expressed in the form of the Generalized Propositional Formula (GPF) : a Boolean product of clauses, where each clause is a sum of products of negated or non-negated literals.

A New Approach To State Minimization Of Finite State Machines, William Yue Zhao

Dissertations and Theses

A complete program to ease the task of large scale Finite State Machine (FSM) minimization presented in this thesis: TDFM (Two Dimensional FSM Minimizer), is a part of the DIADES system. DIADES is an Automatic Design Synthesis System whose development in the Department of Electrical Engineering at Portland State University is supported in part by a research grant from SHARP Microelectronics Technology.

Ultrashort Pulse Production In Synchronously Pumped Mode-Locked Dye Laser Systems, Duncan Leo Macfarlane

Dissertations and Theses

The concern of this dissertation is the understanding and improvement of a class of lasers that is responsible for some of the shortest optical pulses available today. In particular, we seek ways to produce from synchronously pumped mode-locked dye laser systems, shorter pulses of higher intensity with improved pulse-to-pulse consistency. Specific topics.that are discussed herein include the study of the role of the pump pulse in synchronously pumped mode-locked lasers, the study of the pulse shaping and shortening due to an intracavity saturable absorber, and the study of a fundamental pulse train instability associated with these lasers.

The Effects Of Bandwidth Limiting Tuning Elements On A Synchronously Pumped Mode-Locked Dye Laser, Bahram Zandi

Dissertations and Theses

In this study an improved description of the bandwidth limiting tuning filters has been introduced into a semiclassical model for a synchronously pumped mode-locked dye laser system. This model is an improvement over the traditional rate equation approach since it has detailed representations of the energy levels, rotational distribution, and coherence effects. The new set of equations has been solved numerically using the best available values for the various parameters, and autocorrelations have been computed for a range of different length detuning and bandwidth limiting elements. In the experiments, an acousto-optically mode-locked argon ion laser is used to synchronously pump …

Development Of Scale Factors For Clarifier Design Based On Batch Settling Data, Robert K. Anderson

Retrospective Theses and Dissertations

Traditionally, batch settling tests have been employed to determine the values of the settling parameters V₀ and K of the Vesilind equation which represents activated sludge settling velocity as a function of solids concentration. It remains unresolved how closely batch settling tests describe settling in full-scale clarifiers.

An experimental procedure was developed to determine scale factors between batch settling and full-scale solids flux curves. An experimental protocol was determined for full-scale clarifier operation, including specific criteria of necessary instrumentation and operational flexibility. Several graphical techniques were evaluated and a procedure was selected to determine a scale factor between batch …

Expansion Of An Existing Power System - A Study, Suresh Arunachalam

Masters Theses

"An existing paper mill is being expanded to increase its installed capacity. Concurrent expansions will be increasing the electrical demand by 40 - 50 MVA. The expansion also includes the addition of DC drives. The existing system has to be used effectively while additional equipment may be added to cater the load increase. Load flow study with various single line diagram configurations has been carried out to find the required solution. A harmonic analysis was also carried out on the suggested new system to install the required filters and capacitor blanks"--Abstract, page ii.

System Modeling And Vibration Reduction Of A Flexible Beam Under Rotary Motion, Jui-Hung Chien

Masters Theses

"The objective of this thesis work is to reduce the end-point vibration of a flexible beam using the feedback control of the partial state variables. The dynamic model is derived from the assumed-modes method. The new feature of this model is that it is applicable to control system analysis and synthesis. A practical example is presented to illustrate the use of control law to improve the transient response"--Abstract, page ii.

Effects Of Nose Bluntness And Shock-Shock Interactions On Blunt Bodies In Viscous Hypersonic Flows, Dal J. Singh

Mechanical & Aerospace Engineering Theses & Dissertations

A numerical study has been conducted to investigate the effects of blunt leading edges on the viscous flow field around a hypersonic vehicle such as the proposed National Aero-Space Plane. Attention is focused on two specific regions of the flow field. Analysis of these flow regions is required to accurately predict the overall flow field as well as to get necessary information on localized zones of high pressure and intense heating.

The forebody is modeled by slender cones and ogives with spherically blunted nose. A combination of Navier-Stokes and parabolized Navier-Stokes equations is used to compute the flow field. The …

The Multiprocessor System With A Fairly Weighted Global Bus Arbitration Circuit, Shinobu Doi

Theses and Dissertations

The objective of this thesis is to investigate various multiprocessor system structures and to implement and test the resultant system configuration that offers high reliability and availability, ease of expansion, ease of programming, and increased computing performances. The resultant system is a MC68000 based tightly coupled multiprocessor system with large local memories and local I/Os, arbitrated by a specially designed arbitration circuit to implement pseudo random global bus granting. Each of the computer modules is an enhanced independent uniprocessor system with channel access switches to access the global memory. In its multiprocessor mode one computer module cooperates with the other …

Design Of The Electronics And Optics Needed To Support Charge-Coupled Devices : A Project Report ..., Kah Yep Zee

University of the Pacific Theses and Dissertations

Over the last five years, charge-coupled devices (CCD) have been improved dramatically in terms of sensitivity, manufacturability and particularly, cost. This has enabled them to be used economically in many more industrial and commercial electronic imaging processes. They are found in products ranging from video cameras to satellite-based camera systems. This has sparked my interests in these devices, and with a great deal of encouragement from Dr. Turpin, I decided to base my Master's thesis/project on a CCD. The project was mainly based on the design of the electronics and optics needed to support a CCD. The particular circuit design …

A 68000-Based Produce Sorting Microcomputer : Graduate Clinical Research Master's Report, Ramzi Albert Haidamus

University of the Pacific Theses and Dissertations

This report discusses in great detail the various research, design, and development stages of the Produce Sorting Microcomputer developed for HAGAN ENGINEERING Inc. The two-semester Clinical Research project has been approved by the graduate committee at the School of Engineering at the University of the Pacific and fulfills the requirements towards a Master Degree in Electrical Engineering.

The project was selected based on its complexity, feasibility, the time span it required to complete, and its relevance to the area of real time microcomputer design. In addition, the design constraints and specifications were to be dictated solely by HAGAN ENGINEERING Inc. …

Mixed Convection In Laminar/Turbulent Separated Backward-Facing Step Flows, Jen-Tai Lin

Doctoral Dissertations

"Mixed convective heat transfer results for two-dimensional laminar/turbulent flow in a duct with a backward-facing step are reported. The two walls forming the duct are maintained at uniform but different temperatures. The straight wall is maintained at the inlet air temperature, while the downstream section of the stepped wall is heated to a higher temperature. This study focuses on a backward-facing step geometry with an expansion ratio of two. The present laminar study examines a wide range of inlet flow and wall temperature conditions to cover the domain from buoyancy-assisting mixed convective flow, pure forced convective flow, buoyancy-opposing mixed convective …

Time Characteristics Of Small Watersheds In Response To The Probable Maximum Precipitation, Brian Jay Swenty

Doctoral Dissertations

"The EPA Storm Water Management Model (SWMM) was used to perform single event simulations of Probable Maximum Precipitation (PMP) level rainfall events on the Loss Lake watershed in southcentral Missouri. Overland flow was simulated using kinematic wave routing and channel flow was simulated using dynamic wave routing.

Lag time was defined as the time between the centroid of the excess rainfall hyetograph and the centroid of the direct runoff hydrograph.

Rainfall depth, rainfall duration, and the distribution of rainfall intensity were found to be significant predictor variables for lag time. Defined as hydrologic parameters for this study, channel flow roughness, …

Competencies Required Of Baccalaureate Degree Graduates From Graphic Communications Programs, Eldon B. Swanson

Dissertations and Theses @ UNI

The problem of this study was to identify and validate a list of competencies that may be used by graphic communications educators as the basis for curricula development that meets the needs of the contemporary graphic communications industry. The purpose of this study was to provide the graphic communications educator with a comprehensive, prioritized, and logically clustered list of competencies required of baccalaureate degree graduates from graphic communications programs as perceived by representatives from the graphic communications industry and graphic communications educators.

The survey instrument used for this study is based on a seven point graphic rating scale on which …

Relationships Between Chemistry Variations And The Morphology And Nodular Formation Of Carbon Nodules In Ductile Cast Iron, Donald Francis Cassel

Dissertations and Theses @ UNI

The purpose of this study was to determine what relationships exist between the chemistry and the morphology and nodular formation of carbon nodules in commercially produced ductile cast iron. Additionally, the effects of chemistry on the hardness of produced castings from net shake processes were investigated. According to pertinent information in current literature, the hardness of castings has a direct bearing on the final cost of products.

The method of gathering this information and developing a correlation between the chemistry variations and the morphology and nodular formation was facilitated by the cooperation of a commercial producer of ductile cast iron …

An Analysis Of The Importance Of Selected Applied Physics Concepts As Prerequisites To Training In Automotive Technology, Patrick Michael Mccleskey

Dissertations and Theses @ UNI

The purpose of this study has been to develop information that may be useful in the preparation of curriculums and materials dedicated to the remediation of applied physics knowledge and skill deficits demonstrated by entering automotive technology students. The problem was to identify and rank-order the importance of applied physics concepts within the mechanical, fluidal, electrical/electronic, thermal, and chemical domains that are foundational to training in automotive technology.

A questionnaire containing 77 concept statements with a corresponding graphic rating scale was administered via mailed correspondence to all 196 of California's full-time community college automotive instructors. Of these, 130 (66.33%) were …

Adsorption Of Organic Compounds By Microbial Biomass, Ariamalar Selvakumar

Dissertations

The adsorption of hazardous organic compounds such as phenol, 2-chlorophenol, 2-nitrophenol, chlorobenzene, and ethylbenzene onto two types of inactive microbial biomass (activated sludge and nitrifying bacteria) was studied. The adsorption isotherms could be expressed by the Freundlich adsorption isotherm and were found to be nearly linear over the range of concentrations (50 - 200 mg/1) studied. Desorption studies showed that the adsorption process was partially reversible. Heat of sorption was estimated and indicate that the biosorption process involves a physical rather than a chemical mechanism. The adsorptive capacity of biomass is about two to three orders of magnitude less than …

Anaerobic Biodegradation Of Trichloroethylene By Activated Carbon Fluidized-Bed, Jiunn-Horng Chern

Theses

The synthetic wastewater containing trichloroethylene (TCE) was anaerobically degraded with glucose using activated carbon fluidized-bed.

The range of TCE concentration from 26 ppb to 10.8 ppm was examined. The ratio of glucose to TCE in the influent wastewater was ranged from 26 to 805, while the TCE loading ranged from 0.025 to 1.510 mg/hr-L.

The TCE removal efficiency under these treatment conditions was found to be of 99.4%. However, the reduction of chemical oxygen demand (COD) decreased when the TCE loadings was over 0.38 mg/hr-L.

Hydrodynamic Lubrication Performance Of Mineral Oils With Polymer Additives, Moshe David Felzenstein

Theses

This study was undertaken with the view to determining experimentally the influence of polymer additives on journal bearing performance under static load. Viscoelastic lubricants such as oils with polymer additives are in common use and exhibit a reduced dependence of the viscosity on temperature but the effect on the performance of a static journal bearing is not clear. Additives of the polymer polyisobutylene and STP were blended with Newtonian base oil which was used to establish the baseline performance of the test bearing. A comparison was made between the performance of these blends and the base oil. The performance of …

Respiratory Impedances Computed From The Forced Oscillation Technique Using An Esophageal Balloon, Richard Thomas Fisler

Theses

The purpose of this investigation is to develop methodology for the standard measurement and physiological interpretation of lung resistance and compliance using non-invasive forced oscillations techniques and validating these results with standardized esophageal balloon techniques. Application of the forced oscillation technique with an esophageal balloon in place permits partitioning of the respiratory system into the pulmonary system which is of primary interest and the less clinically important chestwall system. Diseased lung states are induced in normal subjects by inhalation of a bronchoconstrictor. The total respiratory (pulmonary plus chest wall) and pulmonary impedances are interpreted using both a linear three element …