Engineering Commons^™

Reliability Of Titanium Dioxide Capacitors, Md. Badrul Hasan

Theses

In recent years many different materials have been investigated as potential thin-film capacitor dielectrics. Silicon monoxide (SiO) and tantalum pentoxide (Ta₂O₅) are the two dielectric materials that are being used by most companies.

This thesis provides some theory and experiments to evaluate the reliability of TiO₂ as a material which would yield a dielectric constant much higher than Ta₂O₅. It has also been shown that titanium dioxide is economically and technically capable of miniaturization demanded by the latest electronic systems.

Included here are the sections covering evaporant materials and their purities, …

A Code Verification System For Ink Jet Printing, Daniel Liang Hsu

Theses

This paper describes system integration of a code verification system. The system utilizes a feature matching

Non-Parametric Dominant Point Detection Algorithms, Kuo-Wei Huang

Theses

Dominant point detection is one of the most important preprocessing steps for landmark-based shape recognition and point-based motion estimation. Two new methods for detecting dominant points are presented. Both methods do not require any input parameter and the dominant points obtained by these methods remain relatively the same even when the object curve is scaled or rotated.

In the first method, for each boundary point, a support region is assigned to the point based on its local properties. Each point is then smoothed by a Gaussian filter with a width proportional to its determined support region. A significance measure for …

Adhesion Effects In Micro Mechanisms, Dennis Alan Kalgren

Theses

Dielectric resonators (DR) are suitably shaped objects made of high dielectric constant materials like TiO2, BaO, ZnO, and accessory ingredients, which can function as electrical resonators covering a very wide frequency range upto 40GHz. The physical dimensions of dielectric resonators are in mm range. High dielectric constant material resonators seem to be ideally suited for microwave applications because of their miniature size, low loss, insensitivity to magnetic dc biasing fields, and ability to concentrate large RF magnetic fields in small volumes. However temperature stabilization of dielectric resonators is an important consideration as the center frequency is a function of temperature. …

Design Of Spatial Linkages For Dwell Function Generation, Donald F. Kelly

Theses

Certain single-loop spatial linkages containing spherical pairs may be used as dwell function generators. Analysis and design of these linkages, however, may be too complex for the practicing engineer.

In this study a method is presented, where the set of link lengths representing a linkage are determined from a smaller set of design parameters. Graphical relationships are also found between the design parameters and functional requirements for dwell, such as output function amplitude and dwell range. These graphs may be used as design charts, and design becomes the calculation of link lengths from design parameters chosen to satisfy the functional …

Design Of An Ionized Cluster Beam System For Thin Film Deposition And Cluster Size Measurement, Steven K. Krommenhoek

Theses

This thesis describes a study of a unique deposition technique known as Ionized Cluster Beam (I.C.B.) deposition. According to I. Yamada and T. Takagi, the inventors of the I.C.B. concept, the beam of deposited material contains clusters as large as thousands of atoms. To study the mass distribution of the ionized species, an I.C.B. source was designed and built by the author. The design provided temperature control along the axis of the crucible by using electron beam heating with two independently controlled emission filaments. Special attention was given to minimizing the background of charged particles generated in various sections of …

Optimum Power System Planning, Youn Tae Kyong

Theses

This thesis presents analysis method of optimum power system planning. The Gauss-Seidel iteration method is used to calculate load flow data of power system. The real and reactive powers, voltage magnitude and phase angle at each bus were obtained using Gauss-Seidel iteration method for a given IEEE sample power system. The load flow calculations were repeated under 60 percentage, 70 percentage, 80 percentage, 90 percentage, 100 percentage loading condition.

The transformation of reference frames were performed to simplify given IEEE sample power system identification. The transformation of reference frame transforms real and reactive voltage, current and impedance variables(reference frame 1) …

An Mcs Basic-52 Sbc Using Anything But An 8052ah-Basic, Hyunyeop Lee

Theses

This thesis exploits the ways to develop a new MCS BASIC-52 SBC using anything but an 8052AH-BASIC microcontroller. The 8052AH-BASIC based SBC offers short development time and low system cost; it is advantageous for numerous applications especially in the instrumentation, measurement and process control. However, the 8052AH-BASIC is no longer officially supported by INTEL and could disappear. Also, this SBC is not adequate for applications where power consumption is an important factor because the 8052AH-BASIC, a MOS product, draws a considerable amount of current.

To solve these problems we demonstrate how the 8052AH-BASIC can be replaced by any of a …

Image Data Compression With Neural Networks, Jianjun Li

Theses

Three efficient image coding schemes, based orb neural networks, have been developed in this thesis: (1) Neural network vector quantization (NNVQ). The main advantage of this new technology is that it can accomplish the complex encoding process much faster than the previous algorithms. Its properties are studied and demonstrated by simulations. (2) A adaptive NNVQ for image sequence coding. Simulation experiments have been carried out with 4 x 4 blocks of pixels from an image sequence consisting of 40 frames. At 0.67 bits/pixel, this scheme achieves good image quality suitable for videoconferencing systems; (3) Neural network prediction. This new prediction …

Biomechanical Analysis Of The Acetabulum And Acetabular Prothesis By Three Dimensional Finite Element Analysis, Mitchell J. Palmer

Theses

A biomechanical analysis modeling methodology of the acetabulum and acetabular prosthesis using three dimensional finite element analysis is presented. A simplified pelvis model is utilized which will yield accurate bone/component interfacial stresses. The SDRC IDEAS software program was used to perform the associated operations. Model generation of the simplified pelvic model and cup, finite element subdivision; material properties, restraints and load modeling are detailed. The model is comprised of 429 isoparametric elements in the simplified pelvis portion and 633 elements in the cup portion. Materials properties and loads are from the literature. The modeling methodology offers the advantages of determining …

Trellis Coded Tamed Frequency Modulation In Rayleigh Fading Channels, Kiran R. Patel

Theses

It is usually difficult to reduce the effects of channel impairements on transmitted information. A fading channel is one such media in which digital communications system operates. A signal is subject to distortion in amplitude and phase when propagating towards the receiver. This puts constraint in required SNR at the receiver, for given performance. Various modulation/coding and demodulation/decoding techniques are employed to lessen the effects of fading. Bit error rate is a performance parameter that sets the criteria for signal design, system architecture and performance.

Here, a slow Rayleigh fading channel with three propagation paths possesing a scattering function of …

Lossless Image Data Compression Techniques Using High Order Markov Arithmetic Encoding, Santo Politi

Theses

It is difficult to compress digital images with acceptable ratios if a distortion is not acceptable. The lack of a rule based structure as in a language is one of the main reasons. In this work a number of algorithms for lossless image data compression are considered. The coding and the modeling aspects are treated separately. Different approaches are proposed to combine. Markov Arithmetic Encoding, a very efficient plain text encoding scheme, with source modeling algorithms to obtain higher compressibility. A modular approach is selected which enables combining various models. Model statistics are studied for further improvements. The schemes presented …

Selection Of Master Degrees Of Freedom In Model Reduction Techniques, Yixing Qi

Theses

Based on the model reduction technique called SEREP (System Equivalent Reduction Expansion Process), systematic ways to select the master degrees of freedom (the degrees of freedom kept in the reduced model) are developed and their usefulness is demonstrated by the examples. The following two criteria are ' developed for two specific objectives.

When we need to identify the response of the full model from the response of the reduced model (usually obtained from the experiments,) we hope to reduce the estimation error between the estimated response and the actual one. We also hope to keep the points which will have …

Modification Of Turret For Enhancement Of Internal Turning Operations On A Cnc Lathe, Talla Rajasekhar

Theses

Towards the modification of the CNC turret a complete set of tool holders have been designed. They have been manufactured and installed according to the specifications. A detailed study of MARK CENTURY 2000 controller and PartMaster is presented. Additionally a component has been designed to be machined on the CNC lathe utilizing the MC2000 part programming capabilities. The part program of the machine component has been developed utilizing various phases of MC2000's Partmaster software. The generated part program has been executed on the CNC lathe.

Single Token Integrated Dama In Multiple Bus Local Networks, Srinivasan Ramadurai

Theses

Multiple-bus local Networks (MBLNs) provide an architecturally simple solutions to serve high-reliability-high capacity local area networks(LAN) applications. Access mechanisms for MBLNs possessing stability and favorable delay characteristics are developed in this thesis. A new technique is proposed that uses a single explicit token to achieve demand assignment multiple access (DAMA) to arbitrate access on all the buses in the system. Analytical model was developed and compared to simulation results that indicates performance improvement in terms of delay characteristics of the system of buses.

Effective Use Of Management Information Systems In Manufacturing, Bhavik Shah

Theses

Information is the catalyst of management and the ingredient that coalesces the managerial functions of planning, organizing, actuating and controlling. The implementation of management information system (MIS) provides the vehicle by which management process can be administered and integrated. Information is at the core of creative thinking, which leads to new ways of improving products, process and services to the invention of new devices and to discovery of new marketable concepts. Thus information for an organization has a dual application for internal operation and external marketing potential.

The organization studied was a small to medium sized batch manufacturer of healthcare …

Temperature Dependent Current-Voltage Characteristics Of Tisi2/N+/P Silicon Shallow Junctions, Bhupendra M. Shah

Theses

Analyses of temperature dependent current-voltage characteristics, of titanium silicide films on n+/p silicon shallow junctions, has been presented here. The fabrication technique involves the formation of shallow pn junctions, by ion-implantation of As+ through titanium films evaporated on P type silicon. The improvement of the activation of dopants has been fulfilled by different annealing processes in conjunction with the dopant drive-in. Electrical measurement of temperature dependent current-voltage technique has been employed to characterize these devices. The temperature dependent factors such as energy bandgap narrowing, majority carrier degeneracy, diffusivities, mobilities and minority carrier life time are evaluated by using key approximations.

Application Specific Integrated Circuits For Single Board Computer, Ximing Shi

Theses

A single board computer is the central part of many microprocessor-based instruments. The implementation of the logic portion of a single board computer using Xilinx Logic Cell Array makes the computer system more powerful. Xilinx Logic Cell Array is a new kind of Programmable Gate Array in application specific integrated circuit with high design flexibility and functional density. The XACT Development System provides schematic capture and auto place-and-route for design entry.

In this thesis, a Xilinx Logic Cell Array was developed and implemented in the 8052AH-Basic based Single Board Computer design. Also, the logic and timing verification and simulation of …

Design And Analysis Of Microengineered Accelerometer, Nana Shigematsu

Theses

This master's thesis is about microengineered accelerometer integrated on a silicon wafer using two polysilicon layers acting as capacitors. This accelerometer operates as a capacitor sensor which is built between two polysilicon layers. It senses a difference of acceleration of gravity, or weight of the polysilicon beam. Both changes tend to change the capacitance between two layers, therefore, to change the resonant frequency of a resonant circuit built using this device and external inductors.

This master's thesis involves theoretical calculations of capacitor sensor for three sizes of capacitor area. Even though this sensor has not been fabricated yet, this sensor …

Multi-Sensor System For An Articulated Robot Hand, Narendra Sucahyo

Theses

The precision and dexterity of a manipulator hand critically depends on the proper extraction and processing of sensory information. This thesis describes how a sensor system equipped with fingertip sensors and strain gauges can provide proper feedback to drive the grasp kinematics of an articulated robot hand. The grasp kinematic that provide the manipulator hand with precision and dexterity is based on impedance control. The fingertip sensors and the strain gauges are constructed of piezoresistive materials for force transduction. Through optimization, based on the sensitivity and capability of the sensors, a synergism of force and contact information can be obtained …

Shear Behavior Of Steel Fiber Reinforced Concrete Beams Under Monotonic And Cyclic Loads, June Suh

Theses

Up to now relatively few tests have been reported on shear behavior in fiber reinforced concrete beams. Even less experiments have been carried out under fatigue loading. In the present experiment, the reinforced concrete beams with 1 percent and 2 percent steel fiber volume fraction are investigated. Conventional stirrups are included in number of beams at certain intervals. Beams are loaded under monotonic and cyclic loads. The strength of beams are determined and the behavior of beams under each loading are observed in order to determine some advantages of adding steel fibers to reinforced concrete beams.

It has been found …

A Study Of Signal Cancellation Effects In Adaptive Arrays, Cheng-Der Sun

Theses

An adaptive array can automatically place pattern nulls in directions from which undesired signals (interference, jamming, or clutter, etc.) arrive and can also provide gain for a desired signal. The purpose of this study was to study the effects of the adaptive array on the desired signal while suppressing the undesired signal.

This was done by studying the transfer characteristics of the adaptive array between its input and output. In this study, C.W. jammers along with the desired signal were considered and input and output relationship of the adaptive array were determined. Several basic types of adaptive arrays were studied …

Demulsification And Separation Of Oil In A Water/Particulate System, Fong-Jung Tai

Theses

The wastewater generated from installation factories contains high suspended solids ( SS ) and oil. Effective removal of oil and clay particles in washrack wastewater can be achieved by using organic polymer TFL-398 alone or in conjunction with alum. The dissolved/emulsified oil concentration and suspended solids are used to represent the degree of oil demulsification and clay particles destabilization, respectively.

To improve the efficiency of oil demulsification and reduce the chemical consumption, pretreatment of the influent wastewater is essentially necessary. pH adjustment to 11-12 generally reduces chemical requirement. Total oil concentration was reduced significantly at pH = 11.7 without any …

The Optimal Design Process : Integrating Creativity And The Axiomatic Approach, John V. P. Tirrell

Theses

This thesis will show that the optimal design process incorporates both creativity and the axiomatic approach. An examination of past and current design methods will substantiate the need for the integration of these components. Creativity is the designer's tool to produce innovative designs which transcend existing design solutions. Creativity is also an integral element of the axiomatic approach to design. In the axiomatic approach, two design axioms are applied to efficiently ascertain the best design solution from the infinite number of choices. Application of the design axioms, theorems, and corollaries streamlines the design process. The integration of creativity and the …

Study Of Essential Factors Affecting The Efficiency Of Sludge Digestion, I-Chang Tsao

Theses

The sludge produced by wastewater treatment plant has some major characteristics such as high COD ( 52093 mg/1 - 79683 mg/1) and VS ( 19247 mg/1 - 44178 mg/1). The present laboratory investigation has indicated that successful treatment and purification of the subject of sludge is possible using multiple-stage anaerobic digestion system.

The multiple-stage system is capable of degrading 40-55% of COD and 50 to 60% of VS. The conventional digestion system degrades 30-45% of COD and 40-50% of VS. After treated by conventional system and multiple-stage system, the concentration of COD and VS are still high (21200 mg/1 - …

Delay Improvement And Reliability Enhancement In A Cim-Based Factory Network, Vimalkumar Upadhya

Theses

Today, Computer-Integrated Manufacturing (CIM) refers to the integration of computer-controlled factory floor devices with engineering design and plant management computers. In general, there is a need for more efficient factory networks than are currently available. To this end, it is essential to investigate new network architectures and study their performance.

A number of CIM networks are analyzed in this thesis, and a new CIM network architecture is proposed. The throughput and delay characteristics of all these network architectures are derived from their respective simulation models. The results indicate that the proposed CIM network architecture has superior performance characteristics, compared to …

Cad/Cam : An Analysis And Application To An Industrial Environment, Kulendu Vyas

Theses

This work is intended to explore details of CAD/CAM techniques and to check its application in medium size industry. To achieve this goal, a thorough study has been carried out on current CAD/CAM techniques, keeping in mind it's requirements, source and application, considering both the hardware and software side of it. To check application of CAD/CAM in an industrial environment, Schering Plough corporation was chosen as a subject. The main theme behind this application to the Schering Corp. was to develop the CAD/CAM capability within company, in order to gain better control over the quality and productivity, and to reduce …

Performance Studies Of Lapped Orthogonal Transforms, Frank E. Wadas

Theses

The comparative performance of several Lapped Orthogonal Transforms(LOTs) [1][2][3][12] is studied in this thesis . Blocking effects of conventional block transforms at low bit rates are reduced with LOT, through basis functions that overlap in adjacent blocks. The block transforms of Discrete Cosine Transform (DCT), Discrete Sine Transform (DST)[4], Discrete Legendre Transform (DLT), and the Modified Hermite Transform (MHT)[16] are extended to LOT in a way that a fast algorithm for nearly optimal LOTs is derived. The Markov and two different exponential correlation models are used as the source models for the derivation of these LOTs. It is shown that …

An Adaptive Robotic Controller With High Robustness, Xiao-Tian Wen

Theses

A complex industrial application of robotic manipulators are beyond the capability of the relatively simple constant gain linear control system. They compensate poorly for nonlinear dynamic model and environment changes, especially when the plant model comes with the unknown coefficients. An adaptive controller for a two joints robotic arm is designed in this thesis. Firstly, the highly coupled nonlinear model is linearized, and then an adaptive regulator is employed which adjust the controller parameters directly based on the on-line parameter estimation, where a least square identification is used. At last the computer simulation is also performed.

Behavior Of Slender High Strength Steel Fiber Reinforced Concrete Columns Under Combined Biaxial Bending And Axial Compression, Tzuoh-Jaw Wu

Theses

A total of four slender high strength steel fiber ( 20 vol. hooked ends 1 in and 2 in ) reinforced concrete columns were casted, cured and tested to failure under biaxially eccentric load us—KT MTS testing system. The experimental load-deflection behavior exhibits not only the ascending branch but also the descending branch of the load and deformation curves.

The experimental ultimate load capacity was analyzed by the equation of Failure Surface Method developed by Hsu. recently, the result shows that the analysis method is able to predict the ultimate load value for biaxially loaded slender concrete columns.

For biaxially …