Engineering Commons^™

Estimation Of The Captive-Carry Survival Function For The Advanced Medium Range Air-To-Air Missile (Amraam), David R. Denhard

Theses and Dissertations

This thesis considers the problem of estimating the survival function of an item (probability that the item functions for a time greater than a given time t) from sampling data subject to partial right censoring (a portion of the items in the sampling data have not yet been observed to fail). Specifically the thesis describes several parametric and non-parametric statistical models that can be used when the sampling data is subject to partial right censoring. These models are applied to the case of estimating the captive-carry survival function of the AIM-120A Advanced Medium Range Air-to-Air Missile (AMRAAM).

A New Goodness-Of-Fit Test For The Gamma Distribution Based On Sample Spacings From Complete And Censored Samples, Huseyin Duman

Theses and Dissertations

This thesis studies a new goodness-of-fit test for the gamma distribution with known shape parameter. This test statistic, Z*, is based on spacings from complete or censored samples. The size of samples varied between 5 and 35. The critical value tables were generated for the Z* test statistic for complete and censored samples. The critical values were obtained for five different significance levels: 0.20 0.15, 0.10, 0.05, and 0.01. An extensive power study, containing 50,000 Monte Carlo runs was conducted using nine alternative distributions, H_a. It was observed that the Z* test statistic was more powerful against certain …

An Analytical Framework For Assessing Future Force Structure Requirements Under Uncertainty, Michael L. Fredley

Theses and Dissertations

The objective of this research was to develop an analytical framework to assess future force structure requirements under the major uncertainties inherent in the post-Cold War era. Among the uncertainties are the frequency and nature of future threats to U.S. interests and the cost of maintaining, building, and demobilizing forces. The centerpiece of the methodology is a computer model which simulates the development of threats to U.S. interests and the actions the U.S. takes to protect those interests. From this simulation, the costs and risks associated with different policy alternatives can be estimated. The simulation is set within a broader …

A Methodology For Comparing The Value Of Competing Afmc Manpower Allocation Strategies, Sandra K. Smith

Theses and Dissertations

This research effort develops a methodology for Air Force Materiel Command (AFMC) decision makers to use during mandated resource allocation exercises for comparing competing manpower allocation strategies. A value model is used to represent the hierarchical objectives of the command, with the primary objective being the attainment of maximum mission effectiveness in the face of constrained resources. Value model decomposition is patterned according to the command's organizational structure. Scoring functions derived using direct assessment survey techniques capture the relationship between manpower and mission effectiveness for lowest level organizations. An additive value function represents the model mathematically; the primary objective value …

Multipoint Quadratic Approximation For Numerical Optimization, Michael A. Blaylock

Theses and Dissertations

A quadratic approximation for nonlinear functions is developed in order to realize computational savings in solving numerical optimization problems. Function and gradient information accumulated from multiple design points during the iteration history is used in estimating the Hessian matrix. The approximate Hessian matrix is the available for a second order Taylor series approximation to the functions of interest. Several truss and frame models will be used to demonstrate the effectiveness of the new Multipoint Quadratic Approximation (MQA) in solving structural optimization problems.

Analysis Of Heads-Up Display Quickening Versus Handling Qualities, Gary M. Konnert

Theses and Dissertations

This study investigated an analytical means of selecting the quickening time constant for the standardized Heads-Up Display flight path marker. The theoretically determined time constant allowed a faster, less resource intensive means of selecting the quickening time constant. The theoretically best time constant for pilot-aircraft handling qualities was equal to the airframe pitch attitude high frequency zero time constant, T_θ2. Flight test indicated an empirical, more labor intensive method yielded better handling qualities, even though paper analysis indicated the theoretical method was better. The theoretically determined time constant gave slightly lower handling qualities. but was less costly to …

Compressible Turbulence Measurement In Low-Angle Injection Into A Supersonic Flow, Gregory J. Mccann

Theses and Dissertations

Mean flow and compressible turbulence measurements have been obtained at two stations downstream of low-angle supersonic injection into a Mach 3.0 flow (Re/m = 15 x 10⁶). Data were collected using conventional Pitot and cone-static probes, single and multiple overheat cross-wire anemometry, and flow visualization techniques (shadowgraphs and schlierens). A direct measure of total Reynolds shear stress was accomplished using a turbulence transformation of the Reynolds-averaged Navier-Stokes equations. Results show compressibility effects, indicated by density fluctuations, to be large relative to the velocity fluctuations and on the same order in all three components. Compressibility appears to account for …

Modified Goodness-Of-Fit Tests For The Inverse Gaussian Distribution With Two Unknown Parameter, Huseyin Gunes

Theses and Dissertations

Modified Kolmogorov- Smirnov (KS), Anderson-Darling (AD), Cramer-von Mises (CV), Kupier (V), and Watson (W) goodness-of-fit tests are generated for the inverse Gaussian distribution with unknown parameters. The inverse Gaussian parameters are estimated by maximum likelihood estimation. A Monte Carlo simulation of 50,000 repetitions is used to generate critical values for sample sizes of 5 through 50 with an increment of five, sample sizes of 60 through 100 with an increment of 10, and 24 different values of the inverse Gaussian shape parameter. A 50,000-repetition Monte Carlo power study is carried out using data with sample sizes of 5 through 100 …

Tree Restructuring Approach To Mapping Problem In Cellular Architecture Fpgas, Narahari Ramineni

Dissertations and Theses

This thesis presents a new technique for mapping combinational circuits to Fine-Grain Cellular-Architecture FPGAs. We represent the netlist as the binary tree with decision variables associated with each node of the tree. The functionality of the tree nodes is chosen based on the target FPGA architecture. The proposed tree restructuring algorithms preserve local connectivity and allow direct mapping of the trees to the cellular array, thus eliminating the traditional routing phase. Also, predictability of the signal delays is a very important advantage of the developed approach. The developed bus-assignment algorithm efficiently utilizes the medium distance routing resources (buses). The method …

Design Of A Digital Compensation Filter, Nader Fakhry

Dissertations and Theses

The 24-bit Motorola DSP56001 processor will be used in combination with the DSP56ADC16 and the PCM-56 to design a good FIR compensation filter. Our objective is to digitize the input analog signal, and to compensate for the attenuation in the magnitude response of the digital sine wave. Two different experiments will be conducted, a hands on approach, and a simulation program. The first one will be realized directly, using the DSP system. We will determine the magnitude response of the system, and then deduce the coefficients of the FIR sin(x)/x filter. A look up table will store those values which …

Experimental And Numerical Determination Of Fluid Velocity Profiles And Turbulence Intensity In Mixing Vessels, Chun-Chiao Chou

Dissertations

In this study, both a laser-Doppler velocimeter (LDV) and a computational fluid dynamic (CFD) software package (FL UENI) were used to experimentally determine and numerically predict the velocity distribution of an unbaffled and a baffled mixing vessel. Two types of impellers were employed, namely a flat blade turbine (FBT) and a pitched blade turbine (PBT). These impellers were studied in a single-impeller or multiple-impeller configuration in the unbaffled and baffled vessels. The flow characteristics in the impeller regions were measured by LDV and used as boundary conditions in the numerical computation. Turbulence effects were numerically simulated using either the k-c …

A Petri-Net Based Methodology For Modeling, Simulation, And Control Of Flexible Manufacturing Systems, Venkatesh Kurapati

Dissertations

Global competition has made it necessary for manufacturers to introduce such advanced technologies as flexible and agile manufacturing, intelligent automation, and computer-integrated manufacturing. However, the application extent of these technologies varies from industry to industry and has met various degrees of success. One critical barrier leading to successful implementation of advanced manufacturing systems is the ever-increasing complexity in their modeling, analysis, simulation, and control. The purpose of this work is to introduce a set of Petri net-based tools and methods to address a variety of problems associated with the design and implementation of flexible manufacturing systems (FMSs). More specifically, this …

Theory, Design And Applications Of Linear Transforms For Information Transmission, Adil Benyassine

Dissertations

The aim of this dissertation is to study the common features of block transforms, subband filter banks, and wavelets, and demonstrate how discrete uncertainty can be applied to evaluate these different decomposition techniques. In particular, we derive an uncertainty bound for discrete-time functions. It is shown that this bound is the same as that for continuous-time functions, if the discrete-time functions have a certain degree of regularity.

This dissertation also deals with spectral modeling in filter banks. It is shown, both theoretically and experimentally, that subspectral modeling is superior to full spectrum modeling if performed before the rate change. The …

Robust Approach To Object Recognition Through Fuzzy Clustering And Hough Transform Based Methods, Tianxiong Fu

Dissertations

Object detection from two dimensional intensity images as well as three dimensional range images is considered. The emphasis is on the robust detection of shapes such as cylinders, spheres, cones, and planar surfaces, typically found in mechanical and manufacturing engineering applications. Based on the analyses of different HT methods, a novel method, called the Fast Randomized Hough Transform (FRHT) is proposed. The key idea of FRHT is to divide the original image into multiple regions and apply random sampling method to map data points in the image space into the parameter space or feature space, then obtain the parameters of …

Design And Micro-Fabrication Of Tantalum Silicide Cantilever Beam Threshold Accelerometer, Chang Joo Kim

Dissertations

Microfabricated threshold accelerometers were successfully designed and fabricated following a careful analysis of the electrical, mechanical, and fabrication issues inherent to micron-sized accelerometers. A uniform cantilever beam was chosen because of the simplicity of design and fabrication. New models for the electrostatic force exerted on the cantilever beam were developed and calculations were made that accurately predicted the electrical characteristics of the accelerometer. The calculations also provided design guidelines for optimizing the accelerometer dimensions. Computer simulation demonstrated that the error of the electrostatic force, calculated using the most accurate model, was within 2% of the actual force which was obtained …

Combustion Of Methyl Chloride, Monomethyl Amine, And Their Mixtures In A Two Stage Turbulent Flow Reactor, Fuhe Mao

Dissertations

The feasibility of converting fuel-bound chlorine and nitrogen into HCl and N₂ with reduced pollutant emissions of CO, NO, and unburned hydrocarbons was investigated in a two-stage turbulent flow reactor. The study consists of four segments: completion and validation of the experimental facility, experimental and modeling studies of methyl chloride (CH₃Cl) combustion, similar studies on monomethyl amine (CH₃NH₂), and finally studies on simultaneous CH₃Cl and CH₃NH₂ combustion.

Validation of the experimental facility was made by combustion of ethylene (C₂H₄) and air under both fuel-lean …

Electrical Characteristics Of Novel Heterojunction Diodes Of Thin Relaxation Semiconductors/P-Si/, Hyung Joo Lee

Dissertations

The relaxation semiconductor is defined as one in which the dielectric relaxation time (τd;resistivity times permittivity) is greater than lifetime (τo). Non-hydrogenated amorphous Silicon Carbide (SiC) and KrF excimer laser induced disordered Si were used for the relaxation semiconductors. Both semiconductors have high resistivity, wide energy gap, and numerous defects. A novel diode, consisting of those semiconductors on p-type crystalline Silicon (c-Si), was fabricated. In the diode structure, an injecting contact was made on the relaxation material and a Schottky barrier contact was made on the c-Si.

Electrical characteristics of both diodes were found to have interesting …

Analysis Of Plates And Reinforced Concrete Columns By Cubic B-Spline Function, Gang Wang

Dissertations

Applying spline functions to numerical structural analysis has been more common in recent years. The recent increase use of spline functions is mainly due to their excellent characteristics, such as sectionalized continuity, linear combination, flexibility, and easy use for various boundary conditions. The whole deformed shape of some structures or substructures can be described with one displacement function constructed by a series of spline functions. By doing this, the mesh generation and the huge computer memory space are no longer needed because only one single superelement can be used in the whole process. The choice of spline functions as displacement …

On Adaptive Code Division Multiple Access Detectors, Wenping Chen

Dissertations

Several variations of adaptive CDMA synchronous receiver schemes which can automatically adjust to the system parameters, are studied in this dissertation. Unlike their non-adaptive counterparts, these adaptive detectors require no knowledge of the received signals' energies and have similar or better performance.

Minimum energy and decorrelating criterion are used to update the weights. Since weights are updated according to the changes of the detector's outputs, hence no training sequence is required. The convergences of some of the aforementioned adaptive detectors are also disscussed.

The detectors proposed in this dissertation are near-far resistant,thus rendering the high-precision power control unnecessary. Among them, …

Time Domain And Frequency Domain Analysis Of Myoelectric Signals During Muscle Fatigue, Rakesh M. Maniar

Theses

Spectral analysis of the EMG signal is a useful tool for studying the complex phenomena of fatigue. The spectral parameters of mean frequency and median frequency, and the time domain parameter of root mean square have been used to measure localized fatigue.

The normal values of median frequency and its decline with fatigue have not as yet been determined in healthy subjects. This should be done in order to apply spectral analysis for clinical evaluations of abnormal populations. Normal median frequency values and its slope were established in this work for the upper extremity muscles of biceps, triceps and deltoid …

Scheduling Of Flexible Manufacturing Systems With Automated Guided Vehicles Using Petri Net Models, Hua-Sheng Chiu

Theses

In this thesis, Petri net models for Flexible Manufacturing Systems (EMS) are constructed. A firing sequence of the Petri net from the initial marking to the final marking can be seen as a schedule of the modeled FMS. By using the branch-and-bound algorithm, an optimal schedule of the FMS can be obtained.

Automated Guided Vehicle Systems (AGVS) are increasingly used for material handling in factories and warehouses. An AGVS can reduce labor costs and is ready to be integrated into an automated factory. This thesis presents two AGVS models (shared and duty) which integrate the control of AGVS with the …

A Three Stage Large Dynamic Range Automatic Transimpedance Control Amplifier, Karim Joseph Sikias

Theses

Long haul fiber optic communication systems require extremely sensitive, low noise amplification of the weak photo diode currents generated by the received light power. Two types of amplifiers have been used for this application: a high input impedance integrating amplifier/differentiating equalizer combination or a transimpedance amplifier. Optical receivers designed with integrating amplifiers exhibit severe low frequency drift and overload problems and are not generally used in wide dynamic range receiver design. This thesis will describe an extremely wide dynamic range transimpedance amplifier incorporating unique methods to maintain stability, wide bandwidth low pulse width distortion during overload conditions.

Soft Decision Adaptive Multiuser Cdma Detector For Asynchronous Awgn Channels, Frank Viehofer

Theses

A multiuser detector in an asynchronous, additive white Gaussian noise, codedivision multipleaccess (CDMA) channel is proposed and analyzed. It employs a combination of a decorrelator and a nonlinear multiuser interference canceler that utilizes soft tentative decisions. The weights of the canceler are adaptively adjusted, in a manner that renders the knowledge of received signal energies and the use of training sequences unnecessary. The steady state error performance of the detector is obtained and found to be superior to the performance of the same detector that utilizes hard tentative decisions.

Stress-Strain Behavior Of High Strength Concrete Cylinders, Danqing Chen

Theses

Due to the recent development of high strength concrete in engineering and construction, it has become more important to study the behavior of materials in structures.

No results have been previously published in the literature regarding the influence of aspect ratio in plain high strength concrete cylinders on stress-strain behavior under uniaxial compression.Thus at present study, compression tests were conducted on 3x6 in., 3x9 in., and 3x12 in. plain high strength concrete cylinders to study their stress-strain behavior. Plain normal strength concrete cylinders were also tested and used for comparative study.

Based on the present investigations, attempting to obtain a …

Aeration And Operation Of An Immobilized Cell Oxidative Bioreactor, James Joseph Woods

Theses

The primary purpose of this work is to help define the optimum window of operations for an immobilized cell oxidative bioreactor. The analytical technique employed requires no outside verification (such as G.C. analysis) and is independent of liquid flow rate. Method of aeration has been determined to be an important parameter for optimizing bioreactor efficiency, and optimization of the quantity of hydrogen peroxide added to provide oxygen during bio-oxidation has been investigated. Ammonium hydroxide as a fixed nitrogen source can be used to restore the vitality of the bioreactor under certain conditions.

The effects of several different methods of providing …

Implementation Of Time-Frequency Distribution Software And Its Use To Study Biological Signals, Mansour Adib

Theses

The joint time-frequency signal representation has received considerable attention as a powerful tool for analyzing biological signals. It combine time-domain and frequency-domain analyses to yield a potentially more revealing picture of the temporal localization of a signal's spectral components. In this research we have developed algorithm which implement time-frequency signal analysis techniques on a computer system. Its primary function is to produce a variety of time-frequency representations and plots from the time series. Numerous generated signals were used to justify our computer algorithm.

Variety of time-frequency distribution were utilized to expand the concept of spectral analysis of heart rate variability, …

Use Of Multiple Transmitters For 3-D Non-Intrusive Particle Tracking, Jitesh H. Agrawal

Theses

A method for non-intrusive tracking of a particle in 3-dimensional space, based on processing of signals emitted from a transmitter embedded in the particle, is being developed. This method uses a mathematical model, which predicts the induced signal in receivers present in the vicinity of flowing particle, and supporting numerical techniques. Specific application aspects related to improving the accuracy of this method are presented.

The focus here is the development of flexible software capable of processing information coming from multiple transmitters with known distinct spatial orientation. Implementation aspects of modified existing empirical corrections for improving model-reality agreement, and new techniques …

Model Parameter Identification For Rod And Cone Oscillatory Potentials, Kehur Banker

Theses

The use of signal modeling of the oscillatory potential (OP) of the electroretinogram (ERG), in the study of cone-rod interaction is investigated. ERG response data were analyzed for red, orange, blue and white flashes on no background and with red flashes on a blue background (to suppress rod responses). The OP signals were extracted from the ERG by digital bandpass filtering and a signal model was fitted through a simplex algorithm to produce the parameters including "OP envelope-amplitude", latency in terms of "center-time" of the OP-envelope and OP frequency. Amplitude for red flashes with or without a blue background showed …

Low Pressure Chemical Vapor Deposition Of Copper Films From Cu(I)(Hfac)(Tmvs), Wei-Shang King

Theses

Recently, copper has been found as a possible substitute for Al alloys because of its low resistivity (1.67 μΩ • cm) and potentially improved resistance to electromigration. Conventional physical vapor deposition (PVD) method do not provide the conformal deposition profile for the high density integrated circuit, therefore, chemical vapor deposition (CVD) has become the most promising method for the resulting conformal profile.

In this work, a cold wall, single wafer, CVD tungsten reactor was used for the deposition of copper with Cu(I)(hfac)(tmvs). Film growth rates were between 100 to 800 A/min depending on processing conditions, and an Arrhenius type activation …

A Comparison Between Revealed Preference (Rp) And Stated Preference (Sp) Based On Results Of Simulations, Qiuzi Chen

Theses

This research quantifies the potential biases resulted from two different data generation methods used in transportation modeling: Revealed Preference (RP) and Stated Preference (SP) techniques. Revealed Preference technique is the conventional approach to generate data. It relies on observed or reported data of actual behavior. Stated preference technique is a new data generation method. It creates transportation scenarios using hypothetical data. Conventional studies favor the use of revealed reference. However, full description of advantages and weaknesses of using revealed preference technique is not available in literature, neither point-to-point comparison between stated preference and revealed preference techniques. This research contributes to …