Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Theses/Dissertations

Discipline
Institution
Keyword
Publication Year
Publication
File Type

Articles 68161 - 68190 of 77902

Full-Text Articles in Engineering

Removal Of Vocs From Waste Gas Streams By Cyclic Membrane Separation Techniques, Gordana Obuskovic May 1996

Removal Of Vocs From Waste Gas Streams By Cyclic Membrane Separation Techniques, Gordana Obuskovic

Theses

In this study, new separation techniques called Flow Swing Membrane Absorption Permeation (FSMABP) and Flow Swing Membrane Permeation (FSMP) were used for the removal of the volatile organic compounds (VOCs). In both cases, processes are cyclic in terms of feed flow while desorption of the VOCs is constantly taking place. The transport mechanism in the FSMABP process is selective permeation followed by absorption of the VOCs into the stagnant nonvolatile absorbent liquid on the shell side of the membrane module and then desorption through a similar polymeric membrane. In the FSMP process, VOCs selectively permeate through the membrane into the …


Dynamic Mechanical Analysis Of Particulate Dental Composites, Minu Parekh May 1996

Dynamic Mechanical Analysis Of Particulate Dental Composites, Minu Parekh

Theses

Typically, dental composites are used in different configurations and situations. When a cavity forms at the occlusal surface of a posterior tooth, a class I and class II filling is used, depending on the extent and nature of the cavity formed. These fillings have to be designed to resist mechanical abrasion and occlusal stress during chewing, bruxing and other tooth functions. Class IV fillings are also designed to resist biting stress. In these applications composites with high filler loading with filler particles of size >0.6μm are used. These composites are typically known as minifill or midifill composites. When more than …


Plasma Enhanced Chemical Vapor Deposition Of Stress Free Tungsten Films, David Perese May 1996

Plasma Enhanced Chemical Vapor Deposition Of Stress Free Tungsten Films, David Perese

Theses

This study focuses on PECVD to make tungsten film for X-ray absorber for use in X-ray lithography applications. The previous LPCVD study was used for comparison of film properties. A cold wall, single wafer, Spectrum 211 CVD reactor was used for the deposition of tungsten from H2 and WF6. The growth kinetics were determined as a function of temperature, pressure and flow rate ratio. The deposition rate was found to follow an Arrehnius behavior between 300-500°C with an activation energy of 55.7 kJ/mol. The growth rate increased linearly with total pressure and H2 partial pressure. In the H2/WF6 ratio studies …


Mass Transfer Of Pryene Between A Solid Phase And Oil/Water Suspensions, Sachin Ashok Purekar May 1996

Mass Transfer Of Pryene Between A Solid Phase And Oil/Water Suspensions, Sachin Ashok Purekar

Theses

This study dealt with understanding the partitioning of pyrene between water and mineral oil, and the mass transfer of pyrene from solid particles to oil/water suspensions.

It was found that when pyrene is dissolved in mineral oil, the amount transferred to water is negligible even after 10 days of phase contact.

Glass beads and sand were used as model solid phases to simulate soil and PAH (pyrene)-contaminated industrial sludges.

The transfer of pyrene from glass beads to mineral oil when no water phase is present was quantified. Mass transfer coefficients, and their dependence on the rate of environment shaking were …


Separation Of Polycyclic Aromatic Hydrocarbons By Using Micellar Electrokinetic Chromatography, Patricia Simmons May 1996

Separation Of Polycyclic Aromatic Hydrocarbons By Using Micellar Electrokinetic Chromatography, Patricia Simmons

Theses

In this work, the use of micellar electrokinetic chromatography (MEKC) for the separation of five polycyclic aromatic hydrocarbon (PAH) compounds is investigated. All of the compounds studied are listed by the United States Environmental Protection Agency as priority pollutants.

In micellar electrokinetic chromatography, solutes partition between the aqueous phase and the micellar phase. This partition is based on the hydrophobicity of each compound. In some cases, organic modifiers are added to the electrophoretic solution to enhance the separation efficiency. The organic modifier used in this study is y-cyclodextrin (y-CD), and sodium dodecyl sulfate (SDS) is used as the micellar phase. …


A New Concept In Artificial Ligament And Tendons Modeling : Finite Element Analysis, Miroslaw Sokol May 1996

A New Concept In Artificial Ligament And Tendons Modeling : Finite Element Analysis, Miroslaw Sokol

Theses

Reconstruction of the Anterior Cruciate Ligament (ACL) has been a major focus in sports medicine for over twenty years. Severe or unrepairable damage of the ACL due to sport injury is a major problem faced by orthopedic surgeons and engineers. To successfully replace or reconstruct an injured ACL, the mechanical properties as well as the dimensional limitation of the material used must be similar to the biological ligaments. Although excessive literature describes experimental investigation on the mechanical property and clinical application of the ligament material, there is no analytical study that describes strains, stresses, and endurance in the bone/ligament/bone complex. …


A Digital Signal Processor Based Optical Position Sensor And Its Application To Flexible Beam Control, Thomas J. Spirock May 1996

A Digital Signal Processor Based Optical Position Sensor And Its Application To Flexible Beam Control, Thomas J. Spirock

Theses

A Digital Signal Processor (DSP) based optical position sensor was developed. The sensor system consists of the following components: 1) analog electronics, 2) the DSP based synchronous demodulation software, 3) PC based interface software which samples and saves the data, and 4) PC based control codes for a flexible beam. experiment.

The ability of the system to determine the distance from the optical sensor to the power modulated light source was assessed by the following tests: 1) a stationary drift test to evaluate the system's noise, 2) a short-range test to determine the resolution of the optical sensor over a …


Circuit Implementation Of A High-Speed Continuous-Time Current-Mode Field Programmable Analog Array (Fpaa), Osama K. Shana'a May 1996

Circuit Implementation Of A High-Speed Continuous-Time Current-Mode Field Programmable Analog Array (Fpaa), Osama K. Shana'a

Dissertations and Theses

The growing interest in programmable analog circuits has led to the development of Field Programmable Analog Arrays (FPAAs). An FPAA consists of: 1) a programmable cell that can be reconfigured to perform several analog functions. 2) an architecture that interconnects a number of copies of the programmable cell.

In this thesis, the full monolithic circuit implementation of the analog part of the programmable cell is presented. Chapter I gives an introduction to the idea of FPAA and introduces the FPAA architecture and the cell block diagram. Chapter II deals with the design and verification of a differential current-mode four-quadrant multiplier. …


Optimization Of Torquer Coil Design For Use With The Small Satellite Attitude Control Simulator, David Deloyd Anderson May 1996

Optimization Of Torquer Coil Design For Use With The Small Satellite Attitude Control Simulator, David Deloyd Anderson

Undergraduate Honors Capstone Projects

This paper presents a procedure used to optimize the performance of a ferromagnetic core magnetic torquer coil design for use on the Space Dynamics Laboratory (Logan, UT) Small Satellite Attitude Control Simulator. The items of optimization include the primary goal of maximizing the coil 's magnetic moment while reducing power consumption and system mass within given power, mass, and dimensional constraints. The optimization process makes use of several simple equations to determine a few starting points for design, after which an iterative approach based on experimentation is used to produce the final design. It is found that optimal magnetic moment …


A Comparative Analysis Of Viable Solar Thermal Technologies For Solar Field Development And Commercialization, Sean M. Crawford May 1996

A Comparative Analysis Of Viable Solar Thermal Technologies For Solar Field Development And Commercialization, Sean M. Crawford

UNLV Theses, Dissertations, Professional Papers, and Capstones

Diminishing fossil fuels and concerns about the quality of the environment has lead the recent drive to establish a commercialized solar field in Southern Nevada. The competing solar thermal technologies for the Solar Enterprise Zone (SEZ) are Parabolic Dish-Stirling, Central Receiver Power Towers, and Parabolic Trough Systems. It is important to compare the technologies based on the guidelines set by the Corporation for Solar Technology and Renewable Resources. The variables weighted are solar conversion performances, initial capital investment, operation and maintenance costs, water and land use, and electricity production costs. All technologies have been proven to viable power sources and …


Effect Of River Impoundment On Its Water Salinity And Associated Environmental Impacts, Ayat Ahmed Soliman May 1996

Effect Of River Impoundment On Its Water Salinity And Associated Environmental Impacts, Ayat Ahmed Soliman

Archived Theses and Dissertations

No abstract provided.


Discharge Coefficient Scale Effects Analysis For Weirs, Michael Clyde Johnson May 1996

Discharge Coefficient Scale Effects Analysis For Weirs, Michael Clyde Johnson

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Much work has been published regarding discharge coefficients for various weir structures. What has not been published to the same extent are the effects of model scale associated with the weirs being studied. If laboratory weirs are too small, scale effects can affect the magnitude of the discharge coefficient. These errors may be significant if the weir serves as a control structure for an emergency spillway. It is imperative that discharge be accurately predicted to enable safe design and operation.

Numerical and physical means were employed to analyze the effects of scale associated with Froude Modeling of weirs with sharp …


Extensive Study Of The Pvc Industry: Relation Of The Processing Time And Processing Temperature To The Degree Of Fusion, As Well As A Strategic Plan For Increasing Consumer Demand, Erick Jason Comeaux May 1996

Extensive Study Of The Pvc Industry: Relation Of The Processing Time And Processing Temperature To The Degree Of Fusion, As Well As A Strategic Plan For Increasing Consumer Demand, Erick Jason Comeaux

Honors Capstones

No abstract provided.


Nonlinear Analysis Of Airfoil Flutter At Transonic Speeds, Scott A. Morton May 1996

Nonlinear Analysis Of Airfoil Flutter At Transonic Speeds, Scott A. Morton

Theses and Dissertations

Hopf-bifurcation analysis is used to determine flutter boundaries of a pitch and plunge airfoil (PAPA) at transonic Mach number conditions. The PAPA model is a coupling of the Euler equations and a two-degree-of-freedom structural model composed of linear and torsional springs. The Euler equations are discretized using an upwind total variation diminishing scheme (TVD) of Harten and Yee. Equilibrium solutions of the PAPA model are computed using Newton's method and dynamic solutions are explicitly integrated in time with first-order accuracy. The Hopf-bifurcation point, which models the flutter condition, is computed directly by solving an extended system of equilibrium equations following …


Implementation Of An Integrated Cost And Schedule Control System In The Egyptian Construction Industry, Nahla Mofid El-Ebiary May 1996

Implementation Of An Integrated Cost And Schedule Control System In The Egyptian Construction Industry, Nahla Mofid El-Ebiary

Archived Theses and Dissertations

No abstract provided.


Organic Matter Characterization Of Virginia Rivers And Reservoirs, Susanne Margaret Lockhart May 1996

Organic Matter Characterization Of Virginia Rivers And Reservoirs, Susanne Margaret Lockhart

Civil & Environmental Engineering Theses & Dissertations

Research was conducted on characterizing the DOC characteristics and to discern whether spatial and temporal variations exist in these characteristics as impacted by seasonal, hydrologic or other factors. Data was cumulative of two studies: the State-Wide Survey in which water samples were taken in March and July 1995 from surface waters in four physiographic regions of Virginia and the James River Peninsula Survey concentrating on reservoirs and rivers on the James River Peninsula.

Results illustrate that the two largest fractions of DOC were the hydrophilic and hydrophobic acid fractions. An increase in DOC was observed between the mountains and the …


Developing An Expert System For Processing Planning, Mahmoud M Abdel Wahab May 1996

Developing An Expert System For Processing Planning, Mahmoud M Abdel Wahab

Archived Theses and Dissertations

No abstract provided.


Waste Steel Chips From Workshops As A Substitute For Fiber Reinforcement In Concrete, Alaa Abdultawab Abulella May 1996

Waste Steel Chips From Workshops As A Substitute For Fiber Reinforcement In Concrete, Alaa Abdultawab Abulella

Archived Theses and Dissertations

No abstract provided.


Layout Synthesis For Datapath Designs, Naveen Buddi Apr 1996

Layout Synthesis For Datapath Designs, Naveen Buddi

Dissertations and Theses

As datapath chips such as microprocessors and digital signal processors become more complex, efficient CAD tools that preserve the regularity of datapath designs and result in small layout area are required. The standard-cell placement techniques ignore the regularity of datapath designs and hence give inefficient layouts. This has necessitated the development of new techniques for datapath module placement.

We developed a layout synthesis tool DataPathLAYOUT, for the bit-slice datapath logic designed using standard-cell libraries. We developed fast and area efficient heuristics for placing the cells in a bit-slice such that the regularity of datapath circuits is preserved and the number …


Software Design Control Of An Autonomous Vehicle, Monish Sharma Apr 1996

Software Design Control Of An Autonomous Vehicle, Monish Sharma

Honors Capstone Projects and Theses

No abstract provided.


Space Trajectory Simulation For The Internet, Michael Selby, Patrick Newton Apr 1996

Space Trajectory Simulation For The Internet, Michael Selby, Patrick Newton

Honors Capstone Projects and Theses

No abstract provided.


Implementation Of Alf Results To Designing Flexible Pavements In Louisiana, Ludfi Djakfar Apr 1996

Implementation Of Alf Results To Designing Flexible Pavements In Louisiana, Ludfi Djakfar

Doctoral Dissertations

The Louisiana Transportation Research Center (LTRC) recently conducted a research effort using the Accelerated Loading Facility (ALF). The objective of the research was to evaluate a limited number of alternative base materials and construction techniques envisioned to provide a significant reduction in the occurrence of shrinkage and reflected block cracking in the cement-stabilized bases. Nine test sections were constructed for this research, using the same wearing course material but having different thicknesses of crushed stone and soil cement bases and subbases. The soil cement base is the most commonly used base material in Louisiana, whereas crushed stone is a preferred …


The Effect Of Wet End Operations On Sizing Loss In Alkaline Papers, Suresh B. Cherukuri Apr 1996

The Effect Of Wet End Operations On Sizing Loss In Alkaline Papers, Suresh B. Cherukuri

Masters Theses

Changes in wet end of alkaline papermaking affect the size development as well as sizing loss. These changes include pH, alkalinity and type of filler used. Precipitated and ground varieties of carbonate fillers and the alkalinity associated with · them are believed to be the causes for the gradual sizing loss in alkaline papers due the accelerated hydrolysis reaction of sizing chemicals at higher alkalinity.

Precipitated and ground calcium carbonate fillers are used as fillers and compared to non carbonate filler such as kaolin clay for their response to size development and sizing loss at lower and higher alkalinity ranges …


A Comparison Of Two Geo-Centric Attitude Indicators As Aids To Unusual Attitude Recovery: Pictorial Vs. Symbolic Displays, Christopher Cohoes Apr 1996

A Comparison Of Two Geo-Centric Attitude Indicators As Aids To Unusual Attitude Recovery: Pictorial Vs. Symbolic Displays, Christopher Cohoes

Master's Theses - Daytona Beach

Aircraft require high cognitive quality aircraft attitude information. Evidence will be presented on aircrew decision-making performance on an unusual attitude recovery task using three different types of attitude displays. Results indicated that among a sample of low-flight time student pilots attending Embry-Riddle Aeronautical University, mean reaction times were significantly faster and error rates significantly lower using an outside-in pictorial display than with either an outside-in symbolic display or an attitude gyro. This is attributed to the pictorial display being a more intuitive display by providing a more natural or realistic representation of aircraft orientation than the other two displays. The …


Evaluation Of A Display With Both Quickened And Status Information For Control Of A Second Order System, Matthew J. Neal Apr 1996

Evaluation Of A Display With Both Quickened And Status Information For Control Of A Second Order System, Matthew J. Neal

Master's Theses - Daytona Beach

Quickened displays have a severe limitation in that they do not give any indication of status information, and therefore no indication of actual error. It was hypothesized in this study that a display with both quickened and status information would enable the operator to make more effective control responses than either a status alone display, or a quickened alone display.

A horizontal axis pursuit tracking task was developed and controlled by eighteen participants with three display types: (1) a status alone display; (2) a quickened alone display; and (3) a status and quickened combined display.

The primary hypothesis was only …


Using An Evolutionary Strategy To Solve Frequency Allocation Problems, Min Chen Apr 1996

Using An Evolutionary Strategy To Solve Frequency Allocation Problems, Min Chen

Masters Theses

Frequency allocation problem (F AP) is to assign radio frequencies to a number of stations subject to a number of constraints, so that the minimum interference is suffered. FAP is NP-complete. In order to solve FAPs, there are interference constraints to be satisfied. There are two constraints of FAP which were the focus of this study: (1) co-channel interference, (2) adjacent channel interference.

Evolutionary Strategies (ESs) are very efficient optimization algorithms based upon the principles of adaptive selection found in nature. In this study, a (μ,A)ES algorithm was implemented to solve instances of FAP.

This thesis has demonstrated that …


The Design, Fabrication, And Evaluation Of A Low-Speed, Low-Turbulence, Anechoic Wind Tunnel, Brian J. Kaplan Apr 1996

The Design, Fabrication, And Evaluation Of A Low-Speed, Low-Turbulence, Anechoic Wind Tunnel, Brian J. Kaplan

Master's Theses - Daytona Beach

In order to provide a means for testing noise reduction techniques in propellers and fans, a low-speed, low-turbulence, anechoic wind tunnel was designed, fabricated and evaluated at Embry-Riddle Aeronautical University.

This open circuit wind tunnel was designed using several other existing wind tunnels as a guide and incorporated an open jet test section. The tunnel, which was built almost entirely out of wood and fiberglass, is powered by a 15 hp centrifugal fan.

Tufts of yarn, a pitot-static tube, and a hot film anemoter were used to determine the flow characteristics in the test section of this wind tunnel. From …


Unsteady, Transonic Flow Around Delta Wings Undergoing Coupled And Natural Modes Response: A Multidisciplinary Problem, Margaret Anne Menzies Apr 1996

Unsteady, Transonic Flow Around Delta Wings Undergoing Coupled And Natural Modes Response: A Multidisciplinary Problem, Margaret Anne Menzies

Mechanical & Aerospace Engineering Theses & Dissertations

The unsteady, three-dimensional Navier-Stokes equations coupled with the Euler equations of rigid-body dynamics are sequentially solved to simulate and analyze the aerodynamic response of a high angle of attack delta wing undergoing oscillatory motion. The governing equations of fluid flow and dynamics of the multidisciplinary problem are solved using a time-accurate solution of the laminar, unsteady, compressible, full Navier-Stokes equations with the implicit, upwind, Roe flux-difference splitting, finite-volume scheme and a four-state Runge-Kutta scheme, respectively. The primary model under consideration consists of a 65° swept, sharp-edged, cropped delta wing of zero thickness at 20° angle of attack. In a freestream …


A One-Dimensional Model For Storm Breaching Of Barrier Islands, Cheol Shik Shin Apr 1996

A One-Dimensional Model For Storm Breaching Of Barrier Islands, Cheol Shik Shin

Civil & Environmental Engineering Theses & Dissertations

A set of numerical models is developed for simulating the four stages of barrier breaching characterized by one horizontal spatial dimension.

The SBEACH model is employed for the first stage of dune/beach erosion. The Lax-Wendroff two-step explicit scheme for Stage II is developed to simulate initiation of ocean flood propagation on initially dry barrier islands and the method of characteristics (MOC), is employed to compute additional boundary data. The development of the Preissmann implicit scheme for water motion and a forward time centered space explicit scheme for sediment motion in Stages III and IV provide a tool to study the …


A Total Systems Analysis Method For The Conceptual Design Of Spacecraft: An Application To Remote Sensing Imager Systems, Knut I. Oxnevad Apr 1996

A Total Systems Analysis Method For The Conceptual Design Of Spacecraft: An Application To Remote Sensing Imager Systems, Knut I. Oxnevad

Engineering Management & Systems Engineering Theses & Dissertations

Increased emphasis is being placed on improving the performance of space projects, within tighter budgets and shorter development times. This has led to a need for more efficient space system design methods. The research described here represents an effort to develop and evaluate such a method.

Systems engineering and concurrent engineering together provide the theoretical foundation for the method. The method, derived from both this theoretical foundation and ideas from experts in the space industry, emphasizes a total systems analysis approach, taking into account given mission requirements, and the mathematical modeling of interactions between system variables and between subsystems. The …