Engineering Commons^™

An Object-Oriented Discrete-Event Simulation System For Hierarchical Parallel Simulations, Kenneth W. Stauffer

Theses and Dissertations

The purpose of this research is to design and implement an object-oriented discrete-event simulation system which supports hierarchically constructed players in a parallel or distributed environment. This system design considers modularity and portability so additional modules may be implemented to experiment with new algorithms for both partitioning and synchronization. A simulation system which meets these requirements was partially implemented on an eight-node Intel Hypercube in C. A desired goal was to maintain the functionality of the existing BattleSim application. Test cases used measure the performance and correct operation of the new simulation architecture using a BattleSim subclass. Test results prove …

Equalization Of A Non-Linear Phase Of A Low-Pass Filter, Rabih Khodor

Dissertations and Theses

In practice, an IIR filter can distort the information content of the signal because of its inherent non-linear phase characteristics introduced through the design of the filter. If the the receiver of the signal is the human ear, e.g., when a speech or music signal is to be processed, phase distortion is quite tolerable. But, in other applications it can be rejected as phase characteristics is required to be fairly linear. Applications of this type include data transmission, where the signal is to be interpreted by digital hardware, and image processing, where the signal is used to reconstruct an image …

An Asic Power Analysis System For Digital Cmos Design, Du Van Nguyen

Dissertations and Theses

Consumers demand for products with ever-increasing functionality, performance, and longer battery life is making low power a critical factor in most system designs. Lower-power designs are less expensive to produce, more reliable, and cost less to operate - factors which create a real competitive advantage. As a result, ASIC designers are demanding better ways to analyze the power of their designs.

In this thesis, an ASIC Power Analysis System (APAS) is developed. APAS is an interactive simulation-based power analysis tool. Using a non-intrusive design technique, APAS can dynamically "snap on" to an existing simulation environment. APAS currently supports three ASIC …

The Multiple Pool Migrating Worker Paradigm : A Distributed System Framework And Model, Cynthia Ann Stanley

Dissertations and Theses

A network of workstations (NOW) can provide an inexpensive and effective distributed processing platform. The purpose of this thesis is two-fold, providing a methodology for distributed computing on a NOW first, and providing a model to predict and monitor performance second. The Multiple Pool-Migrating Worker (MPMW) paradigm uses multiple job pools to divide up tasks and migrating workers to balance the work load. The MPMW paradigm is a quick and efficient way of implementing problems using distributed processing without extensive knowledge of parallel programming. A model describing the MPMW paradigm is developed using queuing theory and Mean Value Analysis techniques. …

Elastic-Plastic Behavior And Limit Load Analysis Of Pipe Elbows Under In-Plane Bending And Internal Pressure, Mohab Ahmed Shalaby

Archived Theses and Dissertations

No abstract provided.

Burst Pressure Prediction Of Filament Wound Composite Pressure Vessels Using Acoustic Emission, Marcus Elwood Fisher

Master's Theses - Daytona Beach

This research demonstrates how acoustic emission (AE) data from flaw growth activity can be used to predict burst pressures in filament wound composite pressure vessels. Acoustic emission data were taken during hydroproof testing for a set of eleven ASTM standard 5.75 inch diameter fiberglass/epoxy bottles. Amplitude distributions were created using only the AE data up to 25% of the expected burst pressure to simulate low level proof loadings (thereby avoiding damage to the bottles). The bottles were tested at three different temperatures -- 32°F, 70°F, and 110°F - and hydroproofed using two different pressurization schemes and two transducer configurations. Moreover, …

Microelectromechanical Isolation Of Acoustic Wave Resonators, James R. Reid Jr.

Theses and Dissertations

Microelectromechainical systems (MEMS) is a rapidly expanding field of research into the design and fabrication of actuated mechanical systems on the order of a few micrometers to a few millimeters. MEMS potentially offers new methods to solve a variety of engineering problems. A large variety of MEMS systems including flip-up platforms, scanning micromirrors, and rotating micromirrors are developed to demonstrate the types of MEMS that can be fabricated. The potential of MEMS for reducing the vibration sensitivity of surface acoustic wave and surface transverse wave resonators is then evaluated. A micromachined vibration isolation system is designed and modeled. A fabrication …

Perceptual Fidelity For Digital Color Imagery, Curtis E. Martin

Theses and Dissertations

The problem of measuring the fidelity of digital color images in a manner that corresponds to human perceptual assessments is addressed. Experiments are performed to validate human visual system (HVS) models, which provide access to a 'perceptual space' in which visual distortions may be measured, and then a model is proposed for assessing the perceptual fidelity of digital color image. Color Mach bands are produced in the first experiment, demonstrating that, as in the brightness channel, low spatial frequency attenuation occurs in the chromatic channels of the HVS. In the second experiment, a correlation between the chromatic channels of the …

Experimental Investigation Of Compressible Boundary Layers Under The Influence Of Pressure Gradients, Raymond C. Wier

Theses and Dissertations

This study examined the effect of mild pressure gradients on the mean and turbulent flow of high-speed boundary layers. Three Mach numbers (1.7, 3.0 and 5.0) were investigated. Three pressure gradients were examined; a zero pressure gradient (ZPG), a favorable pressure gradient (FPG), and a combined pressure gradient (CPG). The CPG consisted of an adverse pressure gradient followed by a favorable pressure gradient. Conventional pressure probes, hot-wire and particle image velocimetry (PIV) were used to examine the flow. Measurement included mean velocity, velocity turbulence intensity, mass flux turbulence intensity and energy spectra. Instantaneous (10 nsec) Mie scattering flow visualizations were …

Performance Analysis Of A Liquid Metal Heat Pipe Space Shuttle Experiment, Timothy J. Dickinson

Theses and Dissertations

Future spacecraft technologies require advanced high-temperature thermal control systems. Liquid metal heat pipes are considered ideally suited for such applications. However, their behavior during microgravity operation is not yet understood. This study investigated liquid metal heat pipe performance in such an environment. Three stainless steel/potassium heat pipes were flown on space shuttle mission STS-77 in May 1996. The objectives of the experiment were characterization of the frozen startup and restart transients, comparison of flight and ground test data to establish a performance baseline for analytical model validation, and assessment of three different heat pipe designs. Heat pipe performance was characterized …

Influence Of Tip Clearance On The Flowfield In A Compressor Cascade With A Moving Endwall, Richard J. Mcmullan

Theses and Dissertations

The effects of changing the blade tip clearances on the velocity and pressure flowfields within a compressor cascade were investigated in this experimental thesis. All moving endwall measurements were taken at a constant flow coefficient of 0.5 and tip clearances of 0.5, 1.0 and 2.0 percent chord. Hot-wire/film probes were used to determine the three-dimensional velocity vector components in various transverse planes - one upstream of the leading edges of the blades, three within the blade cascade and one downstream of the trailing edges of the blades. The transverse velocity vector plots showed a scraping of the tip leakage vortex …

Multidisciplinary And Multiobjective Optimization In Conceptual Design For Mixed-Stream Turbofan Engines, Luc J. J. P. Nadon

Theses and Dissertations

Despite major advances in design tools such as engine cycle analysis software and computer aided design, conceptual gas turbine engine design is essentially a trial-and-error process based on the experience of engineers. Modern optimization concepts, such as multidisciplinary optimization (MDO), and multiobjective optimization (MOO), linked with sequential quadratic programming (SQP) methods and genetic algorithms (GA), were applied to the conceptual engine design process to automate the conceptual design phase. Robust integrated computer codes were created to find the optimal values of eight engine parameters in order to minimize fuel usage, aircraft cost and engine annulus area over a given mission. …

Residual Strength And Fatigue Characterization Of Scs-6/Ti-6-4, Sang-Myung Lee

Theses and Dissertations

Metal matrix composite have potential in a variety of aerospace applications, but they should be better understood before they can be employed. Despite the many studies that have contributed to characterizing the fatigue response of titanium alloy MMCs, few have researched the residual strength. The purpose of this study was to investigate the residual strength and the frequency effects on the residual strength of an unidirectional laminate of SCS-6/Ti-6-4, a titanium alloy matrix based composite under tension-tension, load-controlled conditions at elevated temperatures and different frequencies. Specimens were fatigued at frequencies of 1 and 0.01Hz, and at maximum stress of 900MPa …

Experimental Investigation Of Transverse Supersonic Gaseous Injection Enhancement Into Supersonic Flow, Mark P. Wilson

Theses and Dissertations

In pursuit of more efficient and effective fuel-air mixing for a SCRAMJET combustor, this study was conducted to investigate relative near field enhancements of penetration and mixing of a discrete low-angled (25°) injected air jet into a supersonic (M=2.9) cross flow. The enhancements were achieved by injecting the transverse air jet parallel to the compression face of eight different ramp geometries. The jet-ramp interactions created collinear shock structures, baroclinic torque vorticity enhancement, ramp spillage enhanced vorticity, magnus effect penetration enhancement, and increased total pressure loss. Shadowgraph photography was used to identify the shock structures and interactions in the flow field. …

Demonstrating Optical Aberration Correction With A Mems Micro-Mirror Device, Shaun R. Hick

Theses and Dissertations

This research conducted the first demonstrated use of a micro-electro-mechanical structure (MEMS) mirror array to correct a static optical aberration. A well-developed technique in adaptive optics imaging systems uses a deformable mirror to reflect the incident wave front to the imaging stage of the system. By matching the surface of the deformable mirror to the shape of the wave front phase distortion, the reflected wave front will be less aberrated before it is imaged. Typical adaptive optics systems use piezo-electric actuated deformable mirrors. This research used an electrostatically actuated, segmented mirror array, constructed by standard MEMS fabrication techniques, to investigate …

Data-Driven Process Discovery: A Discrete Time Algebra For Relational Signal Analysis, David M. Conrad

Theses and Dissertations

This research presents an autonomous and computationally tractable method for scientific process analysis, combining an iterative algorithmic search and a recognition technique to discover multivariate linear and non-linear relations within experimental data series. These resultant data-driven relations provide researchers with a potentially real-time insight into experimental process phenomena and behavior. This method enables the efficient search of a potentially infinite space of relations within large data series to identify relations that accurately represent process phenomena. Proposed is a time series transformation that encodes and compresses real-valued data into a well-defined, discrete-space of 13 primitive elements where comparative evaluation between variables …

Requirements, Design, And Development Of A Rapidly Reconfigurable, Photo-Realistic, Virtual Cockpit Prototype, Terry A. Adams

Theses and Dissertations

The United States Air Force uses aircraft flight simulators for pilot training and mission rehearsal. They use a variety of simulators for this task ranging with prices ranging from $400,000 to $30,000,000. These simulators have specialized hardware that restricts reuse of their components and increases maintenance costs. Air Education and Training Command wants to reduce simulators cost and improve availability to the operational commands by supporting research in virtual reality flight simulators. This thesis looks at the development of a reconfigurable virtual cockpit in a distributed virtual environment that can be used for different aircraft as well as training scenarios. …

Evaluation Of Segmentation For Bone Structures In 3d Rendering Of Ultrasound Residual Limb Images, Min C. Baker

Theses and Dissertations

Prosthetists today widely practice manual socket fitting, which produces subjective, inconsistent results. To address this problem, the Computerized Anthropometry Research and Design (CARD) Laboratory is developing a computer-aided socket design system that acquires ultrasound datasets of an amputee's residual limb, creates a 3D model, and helps identify load- bearing and pressure-relief areas. This research project focuses on providing 3D visualization of a residual limb to support the CARD Laboratory's efforts. Creating the 3D model of the skin and two bone contours requires two major steps: segmentation to identify the objects of interest and a surface tracking algorithm to generate the …

Artificial Cochlea Design Using Micro-Electro-Mechanical Systems, George C. Dalton Ii

Theses and Dissertations

The use of Micro-Electro-Mechanical Systems (MEMS) in the design of an artificial cochlea is investigated in depth. Interdigitated finger (comb), cantilever, bridge, and mirror resonators are presented as possible devices used to implement the artificial cochlea. These resonators are demonstrated to be extremely high Q devices, capable of being tuned with a simple DC bias. This suggests a possible change to existing cochlea models that claim highly complex AC feedback as being responsible for changes in the damping of the basilar membrane. The new cochlea model presented here, using MEMS to approximate the tuning of the basilar membrane, may be …

An Investigation Of Instantaneous Plume Rise From Rocket Exhaust, Paul F. Sand

Theses and Dissertations

Rocket launches at Vandenburg Air Force Base and Cape Canaveral Air Station produce exhaust clouds containing several toxic by-products, including HC1 and A12O3. These clouds rise to atmospheric stabilization heights, and then start dispersing and diffusing through the air. Upon reaching the ground, concentration levels of the toxins may present a human health risk. To predict these risks and concentration levels, range officials use a computer program titled the Rocket Effluent Exhaust Diffusion Model (REEDM). The version currently in use has been shown to underpredict the stabilization height of the exhaust cloud. This thesis examines the theory and algorithms used …

Applying Probabilistic Risk Assessment And Decision Analysis Techniques To Avoid Excessive Remedial Investigation Costs, Alejandro Hinojos

Theses and Dissertations

The majority of remediation resources have been consumed by costly and lengthy remedial investigation studies to characterize the human health risk. Unable to deal directly with the uncertainty resulting from the convolution of the uncertainties in a multitude of variables, and heavily persuaded by the liabilities, decision makers and regulators have relied on conservative assumptions and more studies to take appropriate actions. The main objective of this research is to provide tools and techniques to aid risk analysts in determining whether it would be beneficial to gather additional information or whether the decision to take an appropriate action can be …

Determining The Optimum Strategy Of Techniques From The Municipal Solid Waste Management Hierarchy To Maximize Social Value, Camille M. Still

Theses and Dissertations

Environmental managers must make difficult decisions regarding how to manage solid waste generation and disposal. The primary waste management alternatives are source reduction, recycling, composting, incineration, and landfilling often, waste management policies are based entirely on technical considerations and ignore that actual disposal practices depend on individuals' attitudes and behaviors. This research formulated a decision analysis model that incorporates social value measures to determine the waste management strategy that maximizes the individuals' willingness to participate. The social values that are important and that were considered in the decision support model to assist with making decisions about solid waste management were …

Development Of Synthetic Soils For Sorption Mass Transfer Model Validation, Thomas P. De Venoge

Theses and Dissertations

Existing sorption models often fail to describe grain scale sorption because of an inability to define the diffusion domain. A proposed improved model required testing to determine model validity. The testing method used a synthetic media of known geometry such that the distribution of sorption sites was known. Sorption rate data was obtained using batch experiments with the media. Data was used in comparison against model predicted rates. Fined sorption site distributions were compared to real distributions obtained by controlling sorbent geometries. Comparison determined model performance in fitting known distributions. The focus of this study was to (1) determine what …

Habitat Suitability Mapping Through Integration Of Multicriteria Evaluation Techniques With A Geographic Information System (Gis), Anthony A. Ference

Theses and Dissertations

The presence of an endangered species, the Pacific Pocket Mouse (PPM), in critical Marine Corps training areas aboard Camp Pendleton may adversely affect training activities that are crucial to meeting the Marine Corps' mission. Camp Pendleton must focus limited budgetary assets for live trapping surveys of the PPM in the areas of best habitat suitability and the purpose of this study was to develop a PPM habitat suitability map of Camp Pendleton. Suitability maps were developed by integrating expert opinion with the Camp Pendleton Geographic Information System (GIS) database.

Economic Valuation Of Air Force Environmental Resources: A Contingent Valuation Case Study, Timothy P. Haynie

Theses and Dissertations

The Air Force spends $1 billion each year to preserve, maintain, and restore environmental resources under its control (Budget of the United States Government, 1994). Assessing the benefit of this spending is a central issue in federal environmental management. As federal environmental management moves from a "clean it up at any cost" mentality to one which carefully considers the costs and benefits of spending, a fundamental question arises: What value of environmental resources does our environmental spending provide? As in any rational economic exchange benefits must exceed costs; the value of an environmental resource which benefits from public spending must …

A Decision Support Model For Municipal Solid Waste Recycling At United States Air Force Installations, Gergory A. Williams

Theses and Dissertations

The United States Air Force requires each installation to operate a municipal solid waste recycling program. Two inherently conflicting objectives, waste material diversion and financial result, have been established for the program. Reducing landfill disposal is the primary objective, but the incentive for profit is strong because each installation can retain profits from the program. Installations can be divided into two distinct areas, commercial and residential, based on the waste stream composition and funding. Structuring of the recycling program is often done in an ad-hoc manner. A decision support model was developed to evaluate four methods for each area. The …

Independent Verification And Validation Of The Hazardous Material Cost Trade-Off Analysis Tool Developed By The Human Systems Center At Brooks Air Force Base, Thomas S. Choi

Theses and Dissertations

The Air Force realizes that the life cycle cost (LCC) associated with hazardous materials is a significant cost in the acquisition of major weapon systems. In trying to mitigate the growth of environmental LCC for future weapon systems, the Air Force has developed a tool called the Hazardous Material Cost Trade-off Analysis Tool (HAZMAT CTAT). The HAZMAT CTAT estimates the LCC for weapon system hazardous materials, so that intelligent decisions can be made in the early stages of the acquisition process. The problem with implementing this program into the acquisition process is that an independent computer model evaluation has never …

Study Of Desorption Of Contaminant From Synthetic Soil, Kung-Fu Hwang

Theses and Dissertations

A better understanding of sorption and desorption processes could improve estimates of time and cost required for remedial activities, exposure times and health risk, and bioavailability. Conventional rate-limited sorption models do not accurately define the diffusion domain at the grain scale. Heyse (1994) proposed the multiple sites in series (MSS) model, which allows more general description of the geometry of the sorption domain than the classical spherical or discrete distributions. A version of this model was tested by deVenoge (1996). The model was able to accurately simulate sorption rate data, but could not estimate unique geometry parameters. This research is …

A Comparative Analysis Of Two Alternatives To Chemical Aircraft Paint Stripping, George P. Joyce Ii

Theses and Dissertations

The Air Force must periodically strip and paint its aircraft to prevent the damaging effects of corrosion. The paint removal process typically involves the use of toxic chemicals such as methylene chloride which are soon to be banned as a result of impending environmental regulations and increased costs associated with handling and disposing of such material. The Air Force must choose an alternative to methylene chloride chemical stripping which complies with environmental regulations and reduces costs. This thesis compares the life cycle costs and environmental impacts of two alternatives to chemical aircraft stripping. Plastic Media Blasting (PMB) and Modified Medium …

Modeling Plant Uptake Of Metal In Constructed Wetlands Supported By Experimentally Derived Uptake Rates, Michael B. Peake

Theses and Dissertations

Many communities and Air Force installations are using constructed wetlands to filter trace metals from their stormwater runoff. Constructed wetlands are attractive to industry for runoff mitigation because they are relatively cheap to build and operate and require little or no energy for operation. The purpose of this research project is to develop quantitative concepts for understanding the dynamics of metal uptake in constructed wetland plants by constructing a system dynamics model supported by experimental observation and offer environmental managers a tool to simulate, under a broad range of conditions, long term wetland exposure to stormwater runoff contaminated with trace …