Engineering Commons^™

A Gps Code Tracking Receiver Design For Multipath Mitigation Using Maximum Likelihood Estimation, Fred P. Baier

Theses and Dissertations

The NAVSTAR Global Positioning System (GPS) is currently used in many applications requiring precise positioning data. Improving the precise positioning information requires the removal of errors that perturb the received signals. The errors introduced by multiple propagation channels, termed multipath, are not easily removed. These channels are caused by reflective surfaces near the receiver. As such, multipath is uncorrelated between receivers and, thus, cannot be removed through differencing techniques. This thesis investigates a GPS code tracking loop design which uses maximum likelihood (ML) estimation to determine amplitude and phase information of the multipath signal which are used to adjust code …

Message-Bundle Converting In Intenet Protocol Multicast-Based High Level Architecture Exercises, Tracy A. Bobo

Theses and Dissertations

The Department of Defense is pushing for more wide-spread and realistic interactive training simulations which increases the demand on network capacity and resources. While network bandwidth is a measurable resource, packet bandwidth, or the number of packets-per-second (Pk/s) a host can handle, is a shifting commodity. This research analyzes host performance characteristics under varying data loads. The hosts include SGI single and multi-processor systems and Intel Pentium platforms using both Windows 95 and Linux Operating Systems. The networking media covers Ethernet, ATM and FDDI. For the ATM network, both AAL5 and IP over ATM were analyzed. With the data from …

Pseudorandom Code Generation For Communication And Navigation System Applications, John F. Brendle Jr.

Theses and Dissertations

This research project investigated the design, construction and evaluation of a pseudorandom code generator for communication and navigation system applications. These types of codes include spreading codes, Gold codes, Jet Propulsion Laboratory (JPL) ranging codes, syncopated codes, and nonlinear codes. Such waveforms are typically used in communication and navigation system applications. The code generator uses the Stanford Telecom STEL-1032 Pseudorandom Number (PRN) coder. A coder interface was designed and constructed for manual data entry to the registers of the PRN coder. The code generator is capable of independently clocking and generating all possible codes with lengths up to 4,294,967,295 bits. …

Velocity Profiles And Skin Friction On A Ribletted Flat Plate In Adverse Pressure Gradient, Richard D. Branam

Theses and Dissertations

This project investigated the flow field characteristics over a flat, ribletted plate and the effects of an adverse pressure gradient on this flow field. Testing examined the development of the flow over the ribletted plate from laminar through fully turbulent flow fields. The flow field states (laminar, transitional, and turbulent) were determined using local turbulence intensity values and boundary layer profiles. Several parameters were examined to help better describe the flow characteristics, boundary layer profiles, and influence on skin friction drag. The skin friction drag coefficients were calculated using a numerical integration technique to determine an average value and scaled …

Modeling Uptake And Translocation Of Lead (Pb) In Maize For The Purposes Of Phytoextraction, Mark A. Brennan

Theses and Dissertations

Phytoextraction is a remediation technology that uses plants to remove heavy metals from soil. This technology has the potential to decrease the costs of remediating contaminated sites by several orders of magnitude compared to traditional technologies. To effectively implement this technology requires an understanding of the plant processes that control uptake and translocation of metals from the soil. Currently these processes are poorly understood, and especially so for Pb. The purpose of this thesis was to gain insights concerning the plant mechanisms that control uptake and translocation of Pb and how these mechanisms interact to control levels of Pb accumulation …

Visualization And Animation Of A Missile/Target Encounter, Jeffrey T. Bush

Theses and Dissertations

Existing missile/target encounter modeling and simulation systems focus on improving probability of kill models. Little research has been done to visualize these encounters. These systems can be made more useful to the engineers by incorporating current computer graphics technology for visualizing and animating the encounter. Our research has been to develop a graphical simulation package for visualizing both endgame and full fly-out encounters. Endgame visualization includes showing the interaction of a missile, its fuze cone proximity sensors, and its target during the final fraction of a second of the missile/target encounter. Additionally, this system displays dynamic effects such as the …

Development And Validation Of An Experimental Test Rig For Electrohydrodynamic Enhancement Of Forced Convective Heat Transfer, William T. Caldwell

Theses and Dissertations

This report details the development of a facility for the experimental investigation of electrohydrodynamic (EHD) enhancement of forced convection heat transfer. The test facility was developed for the Thermal and Transparencies Laboratory (TATLAB), Air Force Research Laboratory (AFRL), for use in future research into the applicability of EHD for the miniaturization of Air Force heat exchangers. During this research, a closed l6op, medium scale electrohydrodynamic test rig was developed and brought online. The test fluid loop was integrated with a data acquisition and parameter control system. Basic loop and fluid performance testing was accomplished through the use of a 3mm …

A Modeling Study For The Implementation Of In Situ Cometabolic Bioremediation Of Trichloroethylene-Contaminated Groundwater, John A. Christ

Theses and Dissertations

The limitations of conventional groundwater remediation technologies have led to the development of innovative technologies which may achieve national hazardous waste site remediation goals. Before an innovative technology can be implemented in the field, remedial project managers, regulators and other stakeholders require adequate modeling tools to help assess the applicability of the technology at a particular site. This modeling study investigates how an innovative technology, in situ cometabolic bioremediation, might be implemented to remediate a TCE-contaminated site, under different site conditions. A steady-state model is developed which couples an analytical expression to simulate the effect of flow between multiple pumping …

Investigation Of Biodegradation Processes In Solid Waste Landfills, Philip A. Colborn

Theses and Dissertations

Greater demands on landfill capacity, stricter regulations intended to minimize landfill environmental impacts, and the economic potential associated with landfill operations have shifted the emphasis of landfill disposal toward methods concerned with the long term performance and capacity of landfills. Two opposing philosophies have emerged in constructing and managing landfills: the dry tomb and the wet cell. The key to managing a landfill from the wet cell viewpoint is first understanding the biodegradation processes occurring within the landfill. This thesis attempts to determine the fundamental processes responsible for the degradation of solid waste by employing a system dynamics approach. A …

Multiple Model Adaptive Estimation And Control Redistribution Performance On The Vista F-16 During Partial Actuator Impairments, Curtis S. Clark

Theses and Dissertations

Multiple Model Adaptive Estimation with Control Reconfiguration (MMAE/CR) capability to estimate and compensate for partial actuator failures, or "impairments" is investigated using the high-fidelity, nonlinear, six-degree-of-freedom, VISTA F-16 simulation which currently resides on the Simulation Rapid-Prototyping Facility (SRF). After developing a model for inserting partial actuator impairments into the VISTA F-16 truth model, research begins with a battery of single actuator impairment tests. This stage of research explores the capability of the existing MMAE algorithm to estimate single, partial actuator impairments, and helps to define refinements and expansions needed in the MMAE algorithm for the second phase of research: the …

Fatigue Behavior Of A Quasi-Isotropic Graphite/Epoxy Laminate Embedded With A Piezoelectric Sensor, Jon M. Coleman

Theses and Dissertations

This study primarily investigated the mechanical effects of embedding piezoelectric sensors on the tensile and fatigue strength of a quasi-isotropic, carbon-epoxy laminate. A secondary focus was the investigation of the sensor degradation under tensile loading. A [0 | ±45 | 90]_s laminate was fabricated from Hercules AS4/3501-6 pre-preg tape. Specimens were first tested monotonically to obtain an average ultimate tensile strength and to detail the progression of damage. The fatigue tests were tension-tension, R=0.1, 10 Hz, constant amplitude. Results indicated that the embedded piezoelectric sensors did not have a significant effect on the tensile strength of the laminate. Specimens …

Breast Cancer Mass Detection Using Difference Of Gaussians And Pulse Coupled Neural Networks, Donald A. Cournoyer

Theses and Dissertations

CAD, serving as a second reader, has been shown to improve the success of radiologists at detecting breast cancer. This thesis will develop a new algorithm to identify masses in mammograms. The system developed for this thesis will be capable of assisting a radiologist in making decisions.

Applications Of Unsupervised Clustering Algorithms To Aircraft Identification Using High Range Resolution Radar, Dzung Tri Pham

Theses and Dissertations

Identification of aircraft from high range resolution (HRR) radar range profiles requires a database of information capturing the variability of the individual range profiles as a function of viewing aspect. This database can be a collection of individual signatures or a collection of average signatures distributed over the region of viewing aspect of interest. An efficient database is one which captures the intrinsic variability of the HRR signatures without either excessive redundancy typical of single-signature databases, or without the loss of information common when averaging arbitrary groups of signatures. The identification of 'natural' clustering of similar HRR signatures provides a …

Satellite Integrated Power And Attitude Control System Design Study, Stephen A. Fischer, Dwight D. Fullingim, Brian L. James, James M. Valenti, Jorg D. Walter, Paul J. Cotter, William A. Seeliger

Theses and Dissertations

Technological advances have brought Flywheel Energy Storage (FES) systems to the point where they can be used in satellites as replacements for chemical batteries. Flywheels have characteristics that may overcome limitations inherent in batteries. These characteristics include high specific energy, minimal degradation over time, and precise knowledge of charge level. A further advantage of flywheels is that, in a combined system, they can be used to replace traditional attitude control hardware. These Integrated Power and Attitude Control Systems (IPACS) show the potential to have less mass than the systems they replace. The question this study seeks to answer is, "In …

Effects Of Near-Field Scatterers On Space-Time Adaptive Processing, Jonathan W. Fitton

Theses and Dissertations

Near-field scatterers, such as the wing of an airplane, can affect the ability of the processor to null out clutter and jammer signals. The target, clutter, and jammer signals will reflect off the near-field scatterers into the array and appear to be coming from a direction different from their true sources. This thesis develops a theoretical model for the direct path and scattered path signals from the target, clutter, and jamming signals. The optimum weight vector, normally computed using the steering vector to the target and the covariance matrix of the undesired signals, must now include the effects of the …

The Rational Resolution Analysis: A Generalization Of Multi-Resolution Analyses With Application To To The Specific Emitter Identification Problem, Bruce P. Anderson

Theses and Dissertations

The rational resolution analysis RRA is introduced and developed as a generalization of the integer, dilation multiresolution analyses MRA developed by Mallat and Meyer. Rational dilation factors are achieved by relaxing the condition on MRAs that successive approximation spaces be embedded. Conditions for perfect reconstruction are discussed and it is shown that perfect reconstruction is possible with specific constraints on the scaling function the scaling filter must have its roots on the unit circle. Furthermore, the required arrangement of the roots indicate the scaling function must be derived from a B-spline of some degree. It is proven the only compactly …

Microelectromechanical Optical Beam Steering Systems, David M. Burns

Theses and Dissertations

The development of microelectromechanical systems (MEMS) has matured to the point where the fabrication of micron sized devices is feasible. State of the art MEMS construction processes now support the fabrication of novel optical devices that could not previously be built. This dissertation reports on the development of innovative micro optical devices such as Variable Blaze Gratings (VBGs) using state of the art MEMS construction processes. The principle application of the micro optical devices described in this dissertation is steering optical beams; however other applications such as spectral analysis are identified. Specific optical beam steering systems developed and characterized in …

Experimental Investigation Of Water Spray Cooling Characteristics Of A Solid Heated Surface, Rainer F. Ponzel

Masters Theses

Water spray cooling characteristics of a solid heated surface were investigated to better understand the physical phenomenon of nucleate boiling heat transfer for full cone sprays. An experimental test loop was developed to conduct the spray cooling experiments. A uniform heat flux condition was assumed, and the liquid flow rate and nozzle orifice diameter were selected as the main variables. Two water temperatures were chosen to perform the study. Saturated water spray was utilized to measure the wall superheat temperature. Subcooled water spray was applied to investigate the effect of water spray in the single-phase regime.

Experiments conducted using the …

Experimental Investigation Of The Influence Of Molecular Weight On Mixing And Penetration In Supersonic Dissimilar Gaseous Injection Into A Supersonic Cross-Flow, Troy A. Giese

Theses and Dissertations

In pursuit of a more efficient and effective fuel-air mixing for a SCRAMjet combustor, this study investigated relative near field effects of molecular weight on mixing and penetration of different gaseous injection into a supersonic (M=2.9) cross flow. Helium and argon gas were chosen as injectants because of the large differences in molecular weights. Also, mixing enhancement was observed by injecting the traverse gas jet parallel to the compression face of a ramp. Color schlieren photography was used to identify the shock structures and interactions in the flow field. Measurements of mean flow properties were used to establish the jet …

Applying Flywheel Energy Storage To Solar Electric Orbital Transfers, Mark W. Marasch

Theses and Dissertations

This study investigated the application of flywheel energy storage to minimum time, constant thrust orbital maneuvers using electric propulsion. The advantages of using stored energy to continue electric thruster operations while in eclipse were explored. The boundary value problems for several schemes of energy use were examined, and numerical solutions were found. Results of simulations utilizing energy storage were compared to results without energy storage. Schemes incorporating energy storage were found to have advantages in terms of propellant mass used, time spent in transit, and deliverable payload.

Evaluation Of A Maximum A-Posteriori Slope Estimator For A Hartmann Wavefront Sensor, Troy B. Van Caster

Theses and Dissertations

Current methods for estimating the wavefront slope at the aperture of a telescope using a Hartmann wavefront sensor are based upon a centroid shift estimator. The centroid shift estimator determines the displacement, or shift, of the centroid off the optical axis using a moment calculation of the intensity distributions recorded in each subaperture. This centroid shift is proportional to the average slope of the wavefront in each subaperture. A maximum a-posteriori (MAP) slope estimator takes advantage of a-priori knowledge of the wavefront slope statistics and total irradiance falling on the subaperture detector arrays when determining the shift estimate. In order …

Recycling Of Composite Material, Shereen Hassanein El Attawi

Archived Theses and Dissertations

No abstract provided.

An Analysis Of Current Interruption Upon The Behavior Of Light Bulb Filament During Initial Aircraft Impact In Support Of Aircraft Accident Investigations, Daniel J. Larow

Master's Theses - Daytona Beach

The purpose of analyzing annunciator panels, warning, and indicator lamps is to determine the state ("on" or "off") of each light bulb immediately before the impact. Determination of the state of lamps may help investigators determine the probable cause of the accident. The information gained from the lamp's filaments may be used to infer the aircraft's operational parameters prior to impact and to a qualitative appreciation of the severity of the accident. It is generally agreed that upon impact the filament of an unlit bulb will fracture without deformation and the filament of a lit bulb will display plastic deformation …

Complete-Range Activity-Based Rtl Power Estimation, Nur Kurt-Karsilayan

Dissertations and Theses

In recent years, power consumption has become a major concern in the electronic industry. Power reduction can be accelerated in the design cycle by fast and accurate power estimation tools. Since the units of lower-levels of design abstraction are transistors or gates, power estimation becomes a slow process at these levels. Therefore designers need to have tools for fast and accurate power estimation at the higher levels of design abstraction such as register transfer level (RTL).

A novel RTL power estimation technique called CRAB-RPE will be presented in this thesis. The CRAB power model is built upon four important properties …

Routing, Driven Placement For Atmel 6000 Architecture Fpgas, Songhua Zhang

Dissertations and Theses

Based on the concept of Cell Binary Tree (CBT), a new technique for mapping combination circuits into ATMEL 6000 Architecture FPGAs is presented in this thesis. Cell Binary Tree (CBT) is a net-list representation of combinational circuits. For each node of CBT there is a distinguished variable associated with it, the node itself represents a certain logic function, which is selected according to target FPGA architecture. The proposed CBT placement algorithms preserve local connectivity and allow better mapping into ATMEL FPGA. Experiments reveal that the new mapping technique achieved reduction in a number buses used for routing comparing with previously …

Scheduling And Sequencing Arrivals To A Stochastic Service System, Peter M. Vanden Bosch

Theses and Dissertations

Optimization of scheduled arrival times to an appointment system is approached from the perspectives of both queueing and scheduling theory. The appointment system is modeled as a one-server, first-come-first-served, transient queue with independent, distinctly distributed service times and no-show rates. If a customer does show, it is assumed to be punctual. The cost of operating the appointment system is a convex combination of customers' waiting times and the server's overtime. While techniques for finding the optimal static and dynamic schedules of arrivals have been proposed by other researchers, they mainly have focused on identical customers and strictly punctual arrivals. This …

Analysis Of Safe Separation Distances From Natural Gas Transmission Pipelines, James Stephen Haklar

Dissertations

Accidental rupture of natural gas transmission pipelines with subsequent ignition of the escaping gas can result in the loss of life and property. In the United States, current means of protecting both the pipeline and the public include the establishment of class locations, in which specific pipeline design, construction and operation requirements must be attained. In addition, distances at which the pipelines can be safely set back from the community, called safe separation distances, have been developed in some European countries (e.g., Great Britain, the Netherlands) through use of risk assessment principles. However, to date there has been no simple, …

Automobile Air Bag Inflation System Based On Fast Combustion Reaction, Yacoob Tabani

Dissertations

Current automobile air bag inflator technology is complex, expensive and environmentally unsafe. A new and novel air bag inflator based on fast combustion reactions of methane-oxygen mixtures has been developed and studied. The thermodynamics and mass flow parameters of this new inflator have been modeled and found to be in agreement with experimental results.

The performance of the fast combustion inflator was evaluated in terms of pressure-time relationships inside the inflator and in a receiving tank simulating an air bag as well as the temperature-time relationship in the tank.

In order to develop this fast combustion inflator, several critical issues …

Electrocatalytic Control Of Exhaust Soot, Victor L. Callahan

Dissertations

The feasibility of combining electrostatic precipitation and use of a catalytic wall in a straight tube reactor as a means of destroying soot particles was investigated. Enhanced particle diffusion to the wall by an applied electric field provided the means of particle capture for subsequent catalytic oxidation at the active surface in a small length tube.

Soot particles flowing in a gas stream are influenced by the following transport mechanisms: convective flux as a result of bulk flow, diffusion flux as a result of particle concentration or number density gradient, and an electrostatic flux from the coulombic attraction as charged …

Mixed Metal Removal And Recovery By Hollow Fiber Membrane-Based Extractive Adsorber, Ramprakash Chilukuri

Theses

The feasibility and efficiency of simultaneous removal of multiple cations as well as anionic heavy metals from wastewater into a mixed extractant kept stagnant on the shell side of a 2-fiber-set hollow fiber membrane extractor operated as a fixed bed adsorber was explored. The novel extracting solvent was a mixture of an acidic or chelating extracting agent for one or more cations and a basic extracting agent, e.g., trioctylamine (TOA) for extracting anions; both were dissolved in the same diluent kerosene for simultaneous and synergistic extraction of cations and anions. In the stripping part of the fixed bed operation, alkaline …