Engineering Commons^™

Erosion Of Bermuda Grass Covered Soils, Oru-Ntui Johnwatters Nkiri

Theses and Dissertations

Earthen embankments are the most common type of embankment due to the relatively low cost, simplicity, and material availability. However, they are also the most prone to erosion related failure, typically due to overtopping and piping. Research has been conducted to identify ways to control soil erosion and protect earthen embankments with different approaches such as addition of chemicals and biopolymer to the soil, installation of protective layering (geotextiles, concrete), increased soil compaction, and use of vegetation. This thesis considers the use of Bermuda Grass to increase resistance to erosion and protect embankments from failure during overtopping. Grass coverage and …

Multiscale Geometric Analysis In Endovascular Therapies: Ex Vivo, In Silico Approaches, Dima Hussein Ali Bani Hani

Theses and Dissertations

In this work, we address a persistent global challenge of vascular disease, specifically peripheral artery disease (PAD), and arteriovenous fistula (AVF) complications in patients with end-stage kidney disease (ESKD). The important role of vascular geometry in disease intervention plans and the development of endovascular therapeutic strategies (e.g., Drug-coated balloon (DCBs)) is critical in addressing these challenges.

This study evaluates the feasibility of co-delivery of paclitaxel (PTX) and valsartan (VAL) using urea-based coatings in DCB, analyzes the coating morphology and microstructural changes to improve therapeutic results. A computational finite element model was developed to complement experimental work, simulate tissue-coating interactions, compute …

Gut Microbiome Dynamics In Heart Failure And The Therapeutic Potential Of Nmeg-Cgrp, Kamryn Michael Gleason

Theses and Dissertations

Heart failure (HF) is increasingly recognized as a multisystem disease often linked to gut dysbiosis; however, its specific effects on gut microbial composition remain poorly understood. This study examined long-term changes in the gut microbiome in a murine HF model induced by transverse aortic constriction (TAC) and evaluated the effects of NMEG-CGRP. TAC mimics pressure overload-induced cardiac dysfunction, replicating key features of HF. CGRP, a neuropeptide with vasodilatory and cardioprotective effects, shows potential as a therapy for HF but is limited by rapid degradation. A stabilized analog, NMEG-CGRP, was used to assess its impact on cardiac and gastrointestinal health. Mice …

Determination Of Tensile Strength Distribution Of Single Carbon Fibers At Microscale Gagelengths, Karan Deepak Shah

Theses and Dissertations

High performance carbon fibers are widely used as reinforcements in composite material systems for aerospace, automotive, and defense applications. The tensile strength of commercial fibers is significantly less than its theoretical limits. The composite systems are often overdesigned, thus any increase in the fiber tensile strength can yield significant cost and weight savings. Modification of fiber surface treatment (sizing) during manufacturing is a potential route to enhance fiber strength. Single fiber tensile testing at millimeter-scale is typically used to characterize the effect of sizing on the fiber strength. However, the longitudinal tensile failure of a composite system is a result …

Multiphysics Modeling, Analysis, And Design Of Ceramic Hollow Fiber Membranes For Oxygen Separation, Hamed Abdolahimansoorkhani

Theses and Dissertations

Oxygen plays a central role in numerous industrial processes. Several technologies have been reported for producing oxygen from air. Among them, oxygen transport membrane (OTM) technology—based on mixed-conducting, gas-tight ceramic membranes—has attracted significant attention due to its high oxygen selectivity, relatively low capital and operating costs, and versatility for both ex-situ and in-situ applications. Mathematical modeling of OTMs offers a powerful tool to investigate internal multi-physics transport phenomena, providing deeper insight into fundamental mechanisms while serving as a cost-effective approach for optimizing membrane stack designs.

After a comprehensive introduction, in the first part of this dissertation (chapter 2), a comprehensive …

Cold Spray On Fiber Reinforced Polymer Substrates For Composite Repair And Tooling Applications, Patrick Allen Bailey

Theses and Dissertations

Cold Spray technology was first developed in the 1980’s and is an additive manufacturing and repair technique. It works by heating a pressurized carrier gas upwards of 600 °C and inserting metal particles downstream such that when they impact a substrate, the energy transformation causes plastic deformation of the particles. This thesis presents a use case for metal and polymer CS powder on fiber reinforced and fused filament fabrication polymer substrates. The state of the art for CS discusses the most up-to-date research within the field, and where new investigations are required. This research investigates the required process parameters to …

The Effect Of Fascicular Elastin On The Mechanical And Functional Properties Of Healthy, Damaged, And Healing Tendon, Shawn Pavey

McKelvey School of Engineering Graduate Student Theses & Dissertations

Mechanical properties of tendon are highly influenced by structural protein composition and microscopic sub-structures. Within the largest subunit of tendon, the fascicle, the role of the elastin protein remains understudied despite impressive extensibility and fatigue resistance of its resulting elastic fibers. While previous work catalogued contributions of fascicular elastin across tendon type and species, the anticipated effects of elastin in fatigue and healing have not yet been explored. While previous knockout mouse models showed that disruption of elastic fibers led to altered mechanical properties (e.g., increased linear modulus), these models depended on heterozygous elastin deficiency or indirect knockout of proteins …

Deep Learning-Based Change Detection In High-Resolution Remote Sensing Imagery, Hazem Badawy

Theses and Dissertations

Remote sensing has become a key tool for monitoring Earth’s surface over time, offering valuable insights into both natural and human-driven changes. Among its many applications, change detection focuses on analyzing multi-temporal imagery to reveal how specific areas evolve across different time periods. It plays a pivotal role in Earth observation applications, including urban development monitoring, environmental degradation assessment, and disaster response. However, existing approaches often struggle with limited contextual awareness, high sensitivity to noise, and imprecise localization of change boundaries, especially with high-resolution imagery. This thesis investigates the complex problem of change detection in remote sensing imagery by proposing …

Seismic Fragility Analysis Of Above-Ground Liquid Storage Tanks, Pooyan Khajeh Shahzanian

Dissertations and Theses

Liquid storage tanks are critical infrastructure, serving as key storage facilities for various products. As the contents in these tanks are usually highly toxic and flammable, damage to these structures under earthquakes can cause severe consequences, including energy shortage, fire and explosion, and spilling and long-term environmental damages.

Although new liquid storage tanks are designed according to the updated seismic design codes, large numbers of existing storage tanks were built before modern seismic design codes and did not undergo necessary seismic retrofitting. Observations and reports from past earthquakes demonstrate that these older tanks can be highly vulnerable to seismic excitation. …

Design Of Non-Invasive Device To Measure Differential Flow In The Carotid Arteries, Rachel Elisabeth Jacquay

Masters Theses

A stroke is categorized as quickly developing symptoms of cerebral function loss with no apparent cause other than that of vascular origin. Stroke detection in prehospital settings, such as an ambulance, is subjective and often requires additional imaging methods to obtain a definitive conclusion. Common non-invasive methods for stroke detection include Magnetic Resonance Imaging (MRI) and Computed Tomography (CT) scans. Still, these techniques can be expensive, time-consuming, and dangerous due to exposure to strong magnetic fields and radiation. Two additional methods have been proposed for quick, inexpensive, and non-invasive stroke detection, namely Ultrasound Doppler and Pressure Transducer. A simplified physical …

Cyberbullying Defensive Strategy In Social Media Sessions Via Machine Learning And Cyber Deception, Mohammad Shafiqul Islam

Masters Theses

Cyberbullying poses a significant challenge on social media, where traditional detection systems struggle with the nuanced and dynamic nature of online abuse. This thesis proposes an integrated framework that combines large language model (LLM)-based detection with generative decoy responses to enable real-time protection for victims on platforms like Instagram and WhatsApp. Using models such as Mistral 7B, GPT-3.5 Turbo, and Phi-3 Mini, prompt-based one-shot learning achieved 87% detection accuracy and a 5% F1-score improvement over zero-shot approaches, demonstrating robust identification of text-based bullying. A novel synthetic dataset of 98 multi-turn conversations, designed with diverse subtypes and evaluated for realism, addressed …

Investigation Of Micronized Rubber Powder As An Alternative To Polymer Modifiers In Asphalt Pavement, Md Torikul Islam

Student Theses and Dissertations

Researchers have increasingly focused on polymer additives to enhance asphalt pavement performance. Crumb rubber (CR), derived from waste vehicle tires, has emerged as a potential modifier. This study investigates Micronized Rubber Powder (MRP), smaller than 75 μm, as an alternative to polymer modifiers. A PG 64-22 binder was modified with 5%, 10%, and 15% MRP (by weight), and the properties were compared with those of an SBS-modified PG 70-22 binder. Physical, mechanical, and chemical properties were assessed. The results indicated that MRP significantly increased viscosity and required higher processing temperatures. MRP-modified binders demonstrated improved rutting resistance, creep recovery, high-temperature performance, …

Designing A Hybrid Renewable Energy System For The College Of Engineering And Computer Science At Arkansas State University, Partho Das Neer

Student Theses and Dissertations

The main objective of this thesis is to design and analyze the performance of a hybrid renewable energy systems (HRES) for the college of engineering and computer science at Arkansas State University. By implementing the framework as a micro-grid to supply the required power to the Lab Science West building of the college. The proposed model ensures energy reliability and cost reduction. The model consists of photovoltaic (PV) panels, wind turbines (WT), and batteries, whereas MATLAB software was used to design the system and the Electrical Transient Analyzer Program (ETAP) Software is utilized to analyze the effectiveness of the operation …

Heat Transfer Enhancement In Cold Plate Heat Exchangers With Trapezoidal Vortex Generators, Montgomery Miller

Student Theses and Dissertations

An experimental investigation was carried out to study the effects of trapezoidal vortex generators (VGs) as a method of thermal enhancement within cold plate heat exchangers. Three different cold plates were imbedded with VGs in the bottom of the flow passage of varying sizes (h/H = 0.195, 0.253, 0.36) and quantity, as well as a cold plate with no VGs to be used as a comparative baseline. Testing was conducted under the laminar, transitional, and turbulent flow regime (Re = 1000 to 5500) using distilled water as the coolant. Experimental results indicate that the addition of VGs provide a positive …

Development Of An Instrumented Test System To Evaluate Mechanical Characteristics Of Belted Conveyor Systems, Coleman Emerson Wilson

Student Theses and Dissertations

The use of conveyor systems within industrial and warehouse settings gives the ability for increased productivity and increased speed of moving objects. As in many settings, the use of these conveyor systems requires large amounts of continuous runtime, and the ability to save even small amounts of energy over a large period can create large improvements in the total overhead cost of running the facility. Research into the ability to characterize the components within a conveyor system gives the ability to identify sources of large amounts of wasted energy and quantify these losses. There is a need to quantify the …

Comparative Analysis Of Belt-Slider Pan Configurations On The Power Consumption Of Belted Conveyor Systems, Asib Ridwan

Student Theses and Dissertations

Conveyor systems are widely used in industrial applications for material handling, but their high energy consumption remains a significant challenge. This study investigated the influence of different belt-slider pan configurations on conveyor power consumption, aiming to optimize efficiency while minimizing energy losses. Three types of slider pans; mild steel, galvanized steel, and powder-coated steel, were analyzed under controlled experimental conditions to determine the motor torque and power consumption of a test conveyor system under various loading conditions. Torque and power values were derived, plotted, and comparatively analyzed across all configurations to determine performance differences. Static friction coefficients of each type …

Leveraging Computational Modelling/Simulation, Machine Learning, And Additive Manufacturing For Customized Design Of Periodontal And Bone Tissue Scaffolds, Rakesh Pemmada

All ETDs from UAB

The current dissertation presents an overarching pipeline for the development and production of custom-made scaffolds for periodontal tissue regeneration using finite element analysis (FEA), machine learning (ML), and additive manufacturing (AM).CAD anatomically realistic scaffolds were generated from CT-based maxilla and mandible models. The FEA simulation results under masticatory (100 N), parafunctional (500–550 N), and traumatic (800–850 N) loads showed region-specific distribution of stresses and strains, which guided structural reinforcement strategies. Over 1000 3D-printed PCL scaffolds were printed using various pore diameters (200–300 µm) and filament diameters. Five ML models were constructed for predicting print quality based on process factors. Classification …

From Model To Behavior: Methodological Challenges In Using Fuzzy Cognitive Maps To Represent Mental Models, Catherine Elizabeth Moore

Dissertations and Theses

This dissertation examines the use of Fuzzy cognitive maps (FCMs) as representations of mental models and how these representations connect to individual behavior. Fuzzy cognitive maps (FCMs) are semi-quantitative models that encode cause-and-effect structures as directed graphs. They are frequently used to represent individuals' knowledge structures/mental models and should in theory correlate to actions and decisions of individuals; however, this correlation has yet to be explored in a systematic manner. This dissertation represents the first step in experimental research on the connection between FCMs and individual behavior. It examines two theories of how humans use mental models, one based on …

Developing Workflows For Passive Acoustic Detection Of Bedload Transport, Quinn Morgan

Dissertations and Theses

Bedload transport is defined as the amount of sediment, including gravel and rocks, traveling down stream. Monitoring bedload transport is important for river safety, hydrological studies and conservation efforts. Existing methods of directly measuring bedload transport (or bedload flux) involve lowering a collection device into a river and measuring the sediment collected; which can be expensive and time consuming. Hydroacoustic sensors, such as hydrophones, have had success tracking bedload flux remotely. This works by measuring the relatively high frequency of sediment impacts to map onto total bedload transported. No perfected method for detection of sediment generated noise (SGN) currently exists. …

Detecting Electrical Submersible Pump (Esp) Failures And Estimating Run Life Using Artificial Neural Networks, Mostafa Ahmed Sobhy

Theses and Dissertations

Electric Submersible Pumps (ESPs) are one of the important artificial lift methods for sustaining production in mature and high-water-cut wells; but may suffer frequent failures due to mechanical, electrical, hydraulic, chemical, and operational failures. These failures can yield substantial deferred production and intervention costs. Plenty of ESP installations are fitted with downhole sensors. Yet, it is observed that the current industry practice underutilizes the wealth of available sensor and operational data and lacks standardized, explainable failure-type identification and classification.

In this thesis, a comprehensive Machine Learning (ML) and Deep Learning (DL) framework was introduced for ESPs that simultaneously estimates remaining …

The Fate Of Intra- And Extracellular Antibiotic Resistance Genes Through Advanced Wastewater Treatment Process, Celestene Adrianne Sebag

Graduate Theses and Dissertations

More areas across the globe are becoming affected by water stress or water scarcity. The decrease in available freshwater due to overconsumption reveals the direct need to consider other sources for necessities such as drinking water or food production. Agricultural irrigation uses 70% of the world’s freshwater, making the focus on safe and reliable reclaimed water for agricultural reuse imperative. However, contaminants of emerging concern (CECs), such as antibiotics and their resulting antibiotic resistance genes (ARGs), can spread and affect human health if reclaimed water is not treated to the proper level. Antibiotics are widely used in human medicine and …

Optimizing Object Detection For Remote Monitoring With Owl Ducklink Radios, Colin Ren-Jin Babian

Electrical Engineering

This project develops an AI powered object detection system integrated with OWL DuckLink radios to enable real time remote monitoring. The system benchmarks multiple AI accelerators using a Raspberry Pi 5 to determine their efficiency in low power, long range communication environments. By evaluating the Raspberry Pi 5 CPU (7.62W, 14.5 camera FPS, 3.8 inference FPS), Raspberry Pi AI Camera with Sony IMX500 (6.45W, 30 camera FPS, 9.2 inference FPS), and Raspberry Pi AI Hat with Hailo-8L chipset (7.80W, 30 camera FPS, >30 inference FPS), this project identifies the most effective combination of hardware and software for edge AI applications. …

Restoration Of 6-Axis Industrial-Grade Robotic Arms, Bryce Andrew Paulson, Warren Douglas Howard

Electrical Engineering

The Staubli TX60 and TX60CR are industrial-grade, six-axis robotic arms originally designed to perform complex automation tasks in manufacturing environments. Following their retirement from active industrial use, both units were restored to full operational status. As part of this project, they were reprogrammed to execute a pick-and-place routine using kids shape-sorting toys that mirrors typical workflows found in factory settings. The six degrees of freedom afforded by each robot enable a wide range of motion, making them well-suited for tasks such as material handling, product sorting, and repetitive operations typically carried out by human workers. Each model is equipped with …

Using Hydraulic Simulations To Determine The Effects Of Tidal Behavior And Riparian Restoration On Chorro Creek, Jonathan L. Maas

Master's Theses

This thesis examines how tidal backwater effects and riparian restoration influence flooding in the Chorro Creek watershed, a major tributary to the Morro Bay Estuary on California’s Central Coast. Restoration efforts, including levee removal, floodplain reconnection, and revegetation have attempted to improve ecological function and reduce sediment transport. However, recent flood events suggest that these changes may also affect local hydraulics in ways not fully anticipated, particularly under the influence of tides and sea level rise. To analyze these dynamics, a two-dimensional HEC-RAS model was developed using LiDAR terrain, historical imagery, and field data collected from pressure and ultrasonic gauges. …

Electrical Characterization Of Germanium Tin Alloys And Devices For Space Reliability, Kevin K. Choe

Theses and Dissertations

GeSn (germanium tin) alloys are potentially well suited for near-mid infrared space optoelectronic applications. Alloys of GeSn have similar properties to group III-V and mercury-cadmium-telluride semiconductors and are compatible with cost-effective complementary metal oxide semiconductor (CMOS) manufacturing technology. Recent progress in non-equilibrium remote plasma-enhanced chemical vapor deposition (RPECVD) has enabled the crystalline growth of GeSn with Sn concentrations of up to 10% without Sn surface segregation. Several experimental studies in previous literature report CVD- or molecular beam epitaxy (MBE)-grown GeSn alloys achieving a direct bandgap with 6%-9% Sn content. This novel growth technique opens opportunities for a cost-effective, next-generation optical …

Investigating The Impact Of Forest Vegetation On Nuclear Weapon Prompt Radiation Energy Deposition, Paul A. Clement

Theses and Dissertations

This work seeks to answer the unstudied questions “Does a layer of vegetation impact the prompt radiation energy deposition in the soil from an atmospheric nuclear detonation?” and “If yes, by how much?” A new methodology was developed to repeatably automate and streamline a process of generating a three-dimensional geometry for subsequent radiation transport simulations and statistical analysis. The methodology streamlined three diverse applications: a three-dimensional mesh generator, a radiation transport simulation code, and a sensitivity analysis & uncertainty quantification software. The methodology was tested by simulating the quantitative influence that vegetation has on changing the energy deposition into the …

Impacts Of Climate Disruption On Mobility Aircraft Performance In The Pacaf Region, Hannah M. Dauterman

Theses and Dissertations

This thesis investigates the projected impacts of climate disruption on the performance and fuel management of the C-17 Globemaster III, a critical mobility aircraft in the Pacific Air Forces (PACAF) region. As rising global temperatures reduce air density, the performance of aircraft is compromised, resulting in increased fuel consumption, as well as the potential for extended runway requirements and diminished cargo capacity. Using climate projection data from Coupled Model Intercomparison Project Phase 6 (CMIP6), this research analyzes future air temperature trends and their implications for C-17 fuel consumption. Results suggest that by 2049, the U.S. Air Force may incur an …

Designing The Protocol For An Experimental Flight Simulation Study Encouraging Fuel Efficient Behavior, Thomas S. Reardon

Theses and Dissertations

This study designed and tested an experimental instrument to examine how pilots respond to fuel efficiency feedback in a flight simulator. A standardized flight plan, script, and hardware setup were created using X-Plane 12 software and physical flight simulator hardware. The chosen sortie guided participants from Monterey Regional Airport to Moffett Federal Airfield using instrument flight rules (IFR). The flight script provided step-by-step guidance to ensure consistent behavior across participants. The simulator was mapped to match real cockpit controls and allowed for precise data collection including flight time, altitude, heading, and fuel use. The goal was to support a larger …

Multi-Fidelity Machine Learning Modeling For Aerodynamic Response Prediction Of Aerospace Vehicles, Ethan S. Jackman

Theses and Dissertations

Hypersonic vehicle design requires understanding complex aerodynamic phenomena across the full flight regime. This study presents a novel MF surrogate modeling methodology that enables the prediction the full field response across a vehicle’s surface. A Space-Filling Curve (SFC) is used to convert unstructured data into 1D vectors. The a Convolutional Autoencoder is used with transfer learning to reduce the dimensionality of the data. An Emulator-Embedded Neural Network (E2NN) combines multi-fidelity data for fast, accurate predictions. A benchmark analytical example and hypersonic application are used to evaluate the methodology. Using various numbers of samples and sampling strategies it is found that …

Efficient Inference Of Performance Models In Openmp Applications, Gaurav Punjabi

Computer Science and Engineering Master's Theses

Choosing the best OpenMP parameters such as thread count, scheduling type, and chunk size is essential for optimizing parallel program performance. One of the promising approaches is to infer a (pre-trained) performance model at runtime to determine the parameters to run OpenMP parallel regions. Such a performance prediction model can require programs’ code information such as intermediate representation (IR) and other at-runtime information (e.g., input sizes) to make a performance prediction. In such a scenario, extracting or querying the IR information at runtime can create a significant runtime overhead. This thesis proposes a compiler-asssited tuning framework that shifts IR extraction …