Engineering Commons^™

Visage: Improving The Ballistic Vulnerability Modeling And Analysis Process, Brett F. Grimes

Theses and Dissertations

The purpose of this thesis was to improve the process of modeling and analyzing ballistic vulnerability data. This was accomplished by addressing two of the more urgent needs of vulnerability analysts; the ability to display fault tree data and to edit target descriptions. A vulnerability data visualization program called VISAGE was modified to meet these needs. VISAGE was originally created to preview static shotline plots and subsequently grew into a full-featured visualization package for vulnerability target descriptions and analyses data. The next logical step in the programs evolution was to include the needed editing and fault tree display capabilities. The …

A Silicon Knife Design And Fabrication, Mingli Wang

Theses

In this thesis, the design and fabrication of a silicon knife is described. The device design is based on the principle of oxidation sharpening.

The knife is made from a silicon wafer and can be made to be any chosen length up to 150 mm. It was made with the same basic procedures used in semiconductor chip manufacturing. This type of processing/manufacturing results in a knife with a high degree of sharpness and smoothness compared with existing knife technology.

The knife fabrication plan combines IC processing, techniques including anisotropic and isotropic etching of silicon, plasma dry etching and chemical etching …

A General Method For The Inverse Kinematics Of Rotational Displacements In Spatial Mechanisms, John D. Kliminski

Theses

An iterative technique was developed to solve the inverse kinematics problem for the joint rotations in both closed-loop and open-loop spatial mechanisms and robotic manipulators in any prescribed configuration. The method is based on fixing one link in space and maneuvering the other links to form a closed chain, following an approximation of the actual physical assembly of the mechanism. In order to apply the same principle to both types of mechanisms, an open-loop mechanism was modeled as a closed-loop mechanism by creating a fictitious fixed link in the free space between the base and the end of the chain …

Development Of A Desuperheater Rating Method For Energy Code Calculations, Tim Merrigan

Retrospective Theses and Dissertations

The purpose of this project was to develop a rating method for desuperheater water heaters – heat exchangers that remove superheat from the refrigerant in an air conditioner’s compressor discharge line. The project methodology was to first determine the overall heat transfer coefficient-area product (UA) of the heat exchanger for three basic types of desuperheaters. Both heat transfer analysis and the laboratory performance data indicated that the number of transfer units (NTU) for each heat exchanger was relatively independent of the operating conditions for a properly-charged air conditioner with a single-speed compressor and a desuperheater with a single-speed circulating pump. …

Comparing Traditional Statistical Models With Neural Network Models: The Case Of The Relation Of Human Performance Factors To The Outcomes Of Military Combat, William Oliver Hedgepeth

Engineering Management & Systems Engineering Theses & Dissertations

Statistics and neural networks are analytical methods used to learn about observed experience. Both the statistician and neural network researcher develop and analyze data sets, draw relevant conclusions, and validate the conclusions. They also share in the challenge of creating accurate predictions of future events with noisy data.

Both analytical methods are investigated. This is accomplished by examining the veridicality of both with real system data. The real system used in this project is a database of 400 years of historical military combat. The relationships among the variables represented in this database are recognized as being hypercomplex and nonlinear.

The …

Hardware For Fast Global Operations On Distributed Memory Multicomputers And Multiprocessors, Douglas V. Hall

Dissertations and Theses

"Grand Challenge" problems such as climate modeling to predict droughts and human genome mapping to predict and possibly cure diseases such as cancer require massive computing power. Three kinds of computer systems currently used in attempts to solve these problems are "Big Iron" multicomputers such as the Intel Paragon, workstation cluster multicomputers, and distributed shared memory multiprocessors such as the Cray T3D. Machines such as these are inefficient in executing some or all of a set of global program operations which are important in many of the "Grand Challenge" programs. These operations include synchronization, reduction, MAX, MIN, one-to-all broadcasting, all-to-all …

Beam Modes Of Lasers With Misaligned Complex Optical Elements, Anthony A. Tovar

Dissertations and Theses

A recurring theme in my research is that mathematical matrix methods may be used in a wide variety of physics and engineering applications. Transfer matrix techniques are conceptually and mathematically simple, and they encourage a systems approach. Once one is familiar with one transfer matrix method, it is straightforward to learn another, even if it is from a completely different branch of science. Thus it is useful to overview these methods, and this has been done here. Of special interest are the applications of these methods to laser optics, and matrix theorems concerning multipass optical systems and periodic optical systems …

A Nonlinear Dynamic Method For Supporting Large-Scale Decision-Making In Uncertain Environments, Wayne Woodhams

Engineering Management & Systems Engineering Theses & Dissertations

This research developed a methodology for supporting decision making by reducing uncertainty in decision environments which are too large, dynamic and complex to be treated by traditional quantitative and simulation techniques. These environments are complex because of the free choice associated with human involvement, and the existence of a large number of interrelated factors which influence the outcomes of the decision process. They are dynamic because the ground rules affecting those interrelationships are constantly changing. Uncertainty cannot be treated probabilistically, since identification of a full set of outcomes and factors of influence is not possible.

The venue for the investigation …

Compensation And Characterization Of Gallium Arsenide, Randy A. Roush

Electrical & Computer Engineering Theses & Dissertations

The properties of transition metals in gallium arsenide have been previously investigated extensively with respect to activation energies, but little effort has been made to correlate processing parameters with electronic characteristics. Diffusion of copper in gallium arsenide is of technological importance due to the development of GaAs:Cu bistable photoconductive devices. Several techniques are demonstrated in this work to develop and characterize compensated gallium arsenide wafers. The material is created by the thermal diffusion of copper into silicon-doped GaAs. Transition metals generally form deep and shallow acceptors in GaAs, and therefore compensation is possible by material processing such that the shallow …

Nozzle Flow With Vibrational Nonequilibrium, John Gary Landry

Mathematics & Statistics Theses & Dissertations

Flow of nitrogen gas through a converging-diverging nozzle is simulated. The flow is modeled using the Navier-Stokes equations that have been modified for vibrational nonequilibrium. The energy equation is replaced by two equations. One equation accounts for energy effects due to the translational and rotational degrees of freedom, and the other accounts for the affects due to the vibrational degree of freedom. The energy equations are coupled by a relaxation time which measures the time required for the vibrational energy component to equilibrate with the translational and rotational energy components. An improved relaxation time is used in this thesis. The …

Nonlinear Robust Control Of A Series Dc Motor Utilizing The Recursive Design Approach, Michael J. Burridge

Retrospective Theses and Dissertations

In this thesis, the investigation of asymptotic stability of the series DC motor with unknown load-torque and unknown armature inductance is considered. The control technique of recursive, or backstepping, design is employed. Three cases are considered. In the first case, the system is assumed to be perfectly known. In the second case, the load torque is assumed to be unknown and a proportional-integral controller is developed to compensate for this unknown quantity. In the final case, it is assumed that two system parameters, load torque and armature inductance, are not known exactly, but vary from expected nominal values within a …

Perceived Importance Of Iso 9000 Factors As Indicators Of Quality In Industrial Technology Related Programs At Four-Year State Regional Universities, Floyd L. Olson

Dissertations and Theses @ UNI

Industry has often used a quality standard known as ISO 9000. No evidence has been located demonstrating the applicability of an industrial quality model to a singular academic department. The problem of this study was to determine if the guidelines for ISO 9004-2 could have been considered appropriate for Industrial Technology related programs and how they could have been used to indicate quality within such programs.

The purpose of this study was to seek knowledge relating the importance of ISO 9004-2 guidelines to audit and/or improve the quality management of Industrial Technology related departments at 4-year state regional universities. This …

Identification Of Success Factors In The Implementation Of Computer-Integrated Manufacturing, Dean Harold Jensen

Dissertations and Theses @ UNI

The review of recent literature showed a clear trend within the manufacturing sector toward the integration of design and production activities through increased application of the computer. The competitive advantages of computer integration were reported, as well as increased risk due to the amount of time and capital expended in system implementation. The identification of computer integrated manufacturing (CIM) success factors may reduce this risk.

Prior efforts to identify success factors for other areas of endeavor showed that success factors tended to vary with the four project phases, but were stable over time within a particular phase. More recently, empirical …

Investigation Of The Relationship Between Fuel Injection Nozzle Roto Flow And Hydra Flow And The Engine Torque Of A Diesel Engine, Guang Jin

Dissertations and Theses @ UNI

The purpose of this study was to investigate the possibility of reducing diesel engine torque variation by optimizing fuel injection nozzle tip configuration. In order to reduce engine torque variation, test runs were conducted to determine whether fuel injection nozzles affected diesel engine torque. There was a further effort to determine whether a correlation existed between the fuel injection nozzle roto flow and hydra flow, and the engine torque at specified engine speeds.

Engines installed in cotton pickers and tractors were used for this study. Engines, five from the cotton picker and five from the tractor group were chosen randomly …

Effect Of Agricultural Fiber Reinforcement On The Mechanical Properties Of A Recycled Polyethylene Plastic Composite Material, Michael E. Courbat

Dissertations and Theses @ UNI

This study determined the effect of certain agricultural fiber reinforcements on the tensile and impact mechanical properties of a recycled polyethylene plastic composite material. The purpose of the study was to provide information on certain mechanical properties of a recycled polyethylene plastic material as part of a coordinated materials application process.

A prototype product run of the plastic composite material was done and test specimens were selected from this material. Notch impact, tensile, and flexure tests were conducted on test specimens. Test procedures complied with accepted standards from The American Society For Testing and Materials (ASTM). Tests were conducted on …

An Analysis Of The Use Of Programmable Controllers To Control An In Situ Leach Mine Wellfield, Jimmy W. Stokey

Dissertations and Theses @ UNI

In situ mining is a relatively new method that has the potential of recovering a variety of minerals. This process is quickly becoming an alternative to conventional mining techniques that are environmentally unsound. Two problems associated with in situ mining are, the amount of waste water generated by the process (bleed) and the uncontrolled migration of lixiviant outside the production zone (an excursion).

The purpose of this study was to determine if in situ mining processes could be monitored and controlled with a Sequential Control and Data Acquisition (SCADA) system. Using programmable logic controllers, a cost-effective SCADA system was designed …

A Comparative Study Of The Perceived Educational Needs Of Iowa Merged Area Vii Manufacturers And Iowa Technical Educators, David D. Bradney

Dissertations and Theses @ UNI

This research was a descriptive pilot study that compared the perceptions of Iowa Merged Area VII manufacturers and Iowa technical educators regarding technical curricula, occupational skill certification, and drafting practices as these relate to Associate Degree programs in Mechanical Drafting and Design Technology. The problem was to determine what should be taught in two year technical curricula in Mechanical Drafting and Design Technology. The purpose of the study was to compare the perceived educational needs of Iowa Merged Area VII manufacturers and Iowa technical educators regarding the content of Mechanical Drafting and Design Technology curricula. The populations used for this …