Engineering Commons^™

Characterization Of The Flow Field Over An Ablative Surface, Michael Allard, C. M. White, Y. Dubief

Ablation Workshop

No abstract provided.

Experimental Determination Of Pyrolysis Products From Carbon/Resin Ablative Materials, Hsi-Wu Wong, Jay Peck, Robin Edwards, Guillaume Reinisch, Jean Lachaud, Nagi N. Mansour

Ablation Workshop

No abstract provided.

Remote Recession Sensing Of Ablative Heat Shield Materials, Michael Winter, Margaret Stackpoole, Anuscheh Nawaz, Gregory Lewis Gonzales, Thanh Ho

Ablation Workshop

No abstract provided.

In-Situ Recession Measurements By Photogrammetric Ablator Surface Analysis, Stefan Löhle, T. Staebler, T. Reimer, A. Cefalu

Ablation Workshop

No abstract provided.

A Light-Weight Ablative Material For Research Purposes, Thomas Rothermel, C. Zuber, G. Herdrich, L. M. G. F. M. Walpot

Ablation Workshop

No abstract provided.

The Design Of A Mobile, Animatronic Bald Eagle, Eric Burns

Phi Kappa Phi Research Symposium (Archived)

Modern animatronics are used as a tool to help engage audiences in realistic and entertaining experiences. Many animatronic figures are dynamic in movement, but static in mobility. The research presented covers the beginnings of mobile animatronic research. An animatronic bald eagle, Opportunity, was designed for that purpose. Animations for Opportunity are generated by integration of Arduino, Pololu Mini Maestro, and Hitec Servo Motors. Arduino receives signals from flex sensors which cause voltage variations when “flexed”. The 1:1 scale, animatronic eagle can be perched on the arm of an “actor” who simulates an eagle’s caretaker. The flex sensors are located within …

Ablation Test Case Series #3, Tom Van Eekelen, Alexandre Martin, Jean Lachaud, Daniele Bianchi

Ablation Workshop

No abstract provided.

Overview Of Ablation Test-Cases, Alexandre Martin, Jean Lachaud, Tom Van Eekelen, Ioana Cozmuta, Michael Wright, Nagi N. Mansour, Daniele Bianchi

Ablation Workshop

No abstract provided.

Microscale Modeling Of Ablative Thermal Protection System Materials, Eric Stern, Graham Candler, Tom Schwartzentruber, Ioannis Nompelis, Michael Barnhardt

Ablation Workshop

No abstract provided.

Material Response Characterization Of New-Class Ablators In View Of Numerical Model Calibration, Bernd Helber, Alessandro Turchi, T. E. Magin

Ablation Workshop

No abstract provided.

Uncertainty Analysis Of Carbon Ablation In The Vki Plasmatron, Alessandro Turchi, P. M. Congedo, Bernd Helber, T. E. Magin

Ablation Workshop

No abstract provided.

Investigation Of Surface Radiation In Earth Re-Entry Flows With Graphite Ablation, Christopher Alba

Ablation Workshop

No abstract provided.

Surface Effects And Phenomena On Ablative Materials, Alexandre Martin

Ablation Workshop

No abstract provided.

Ablamod: Advanced Ablation Characterization And Modelling European Project Description, Gregory Pinaud, A. Guelhan

Ablation Workshop

No abstract provided.

Overview Of Stmd’S Investments In Advanced Entry, Descent And Landing (Edl), Michael Wright

Ablation Workshop

No abstract provided.

Plastic Deformation Of Steel Plates Under High Impact Loading, Brendan O'Toole

NSTec UNLV Symposium

• UNLV Two-stage Light Gas Gun
• Experimental Measurements
• Physical Results of Impact on Target Plates
• Research Objectives
• Computational Analysis Methods
• Material Models used in Computational Analysis
• Simulation Comparison: Crater and Deformation
• Simulation Comparison: Free Surface Velocity
• High Speed Video of Experiments
• Microscopy of Failure Surface: Is Phase Change an Issue?
• Electron Back Scatter Diffraction (EBSD) of Failure Surfaces
• On-going Plans and Future Work

Diversity Catalysts Involvement And Impact, Klod Kokini, Patrice M. Buzzanell, Clint Chapple, Andrew Hirsch, Kathleen Howell

ADVANCE-Purdue Gender and STEM Research Symposium

The National Science Foundation’s (NSF) ADVANCE program has funded over $130 million USD in efforts “to increase the representation and advancement of women in academic science and engineering careers, thereby contributing to the development of a more diverse science and engineering workforce” (http://www.nsf.gov/crssprgm/advance/index.jsp). The PURDUE-ADVANCE project has three major goals: 1) to increase the number and success of STEM women faculty of color; 2) to increase the success and leadership of women faculty in STEM, and 3) to educate all the faculty and in particular, the majority, about the benefits of diversity and inclusion (see http://www.purdue.edu/discoverypark/advance/). Across …

Epics: Broadening The Pathway Into Stem, Mindy Hart, Patrice M. Buzzanell, William Charles Oakes, Carla B Zoltowski

ADVANCE-Purdue Gender and STEM Research Symposium

The Engineering Projects in Community Service (EPICS) program was co-founded at Purdue University in 1995 and has since spread throughout the United States and globally with inroads into K-12 education through EPICS High. This presentation offers a synthesis of research findings and interventions gleaned from several datasets about students’ and alumni’s reported experiences with EPICS and the consequences of their participation. In particular, this presentation discusses the ways in which EPICS provides a different vantage point on the underrepresentation of women in STEM (science, technology, engineering, and math). Specifically, researchers have been tackling this issue of underrepresentation for decades with …

Appreciating Episodic Mentoring: Reconsiderations Of And Interventions For A Comprehensive Mentoring Process For Engineering Faculty, Patrice M. Buzzanell, Ziyu Long, Klod Kokini, Lindsey B. Anderson, Jennifer C. Batra

ADVANCE-Purdue Gender and STEM Research Symposium

The benefits of formal and informal mentoring systems in academe and other organizational settings are well documented. However, a third form of mentoring—known as episodic or spontaneous mentoring as well as mentoring moments—offers a different entrée point into the everyday construction of mentoring. Whereas most mentoring either focuses on one-on-one long-term relationships or group/cluster mentoring arrangements, episodic mentoring emphasizes processes, relational aspects of the mentoring experiences, multiple inputs, and individual empowerment. Based on inductive-deductive analyses of in-depth interviews and other empirical data about engineering faculty members' mentoring experiences in a mid-western university, we discuss how episodic mentoring is a way …

Navigating Pregnancy And Parenthood: Work-Family Considerations For Men And Women Graduate Students In Stem And Other Disciplines, Ziyu Long, Patrice M. Buzzanell, Abigail Selzer King

ADVANCE-Purdue Gender and STEM Research Symposium

Scholars and non-academicians consider popular key advantages to be flexibility in career trajectories as well as autonomy and control over one’s schedule and the work that one chooses to do (e.g., Buzzanell & Lucas, 2006, 2013). Although academic careers seem to offer these benefits, there are questions about whether and how such flexibility actually occurs, particularly in times of pregnancy/adoption, family leave, and work-life “balance” (e.g., Stone, 2008). Implicit in academic flexibility is that graduate student careers might evidence some of the same flexibility but within institutional structures that can range from lockstep to a build-you-own-plan and timetable model. In …

Post-Fracture Capacity Of Railroad Flat Car Bridges, Teresa L. Washeleski

Purdue Road School

Railroad flatcars (RRFCs) are a convenient option to replace existing deteriorating bridge structures on low-volume roads. They are typically used as the bridge superstructure by placing two or more flatcars side-by-side to achieve the desired bridge width. Utilizing RRFCs as a bridge allows for rapid construction and greater cost savings compared to traditional practices. These benefits make them an attractive solution for rural communities in Indiana, as well as other states.

Uncertainty remains about the response under higher loads than could be easily achieved in the field and the level of redundancy of railroad flatcar bridges. Using RRFCs as bridges …

Drilled Shaft Design & Construction-Integrity Testing Issues, Mir A. Zaheer, David Latka

Purdue Road School

This presentation will provide an overview of the design and construction of drilled shafts in Indiana, including construction monitoring issue, discussion of CSL, PIT and TIP testing, and comparisons with cores taken.

Road Safety Audits, Henry Brown

Purdue Road School

A Road Safety Audit (RSA) is a formal review of an existing or proposed road segment or intersection by an independent, multi-disciplinary team. The purpose of an RSA is to identify safety concerns and suggest possible countermeasures to the project owner. There are several benefits to conducting RSAs, including increased awareness of safety and a reduction in the number of crashes. The RSA process includes 8 steps during which the RSA team develops a list of findings and presents them to the project owner for consideration. The RSA process for an existing facility includes a field review during which the …

Post-Failure Capacity Of Built-Up Steel Members, Matthew H. Hebdon

Purdue Road School

Mechanically fastened built-up steel members have long been known to possess internal member redundancy and, as a result, multiple load paths which can be exploited to increase their functional life. Internal redundancy provides the ability to resist total member failure in the event of a fracture of an individual component. However, there is little experimental data in the literature regarding post-fracture capacity in terms of strength and subsequent fatigue life. The experimental study currently underway will provide needed information on parameters that affect the ability of built- up members to arrest a fracture as well as the available remaining fatigue …

2014 Road School, Kevin M. Hetrick

Purdue Road School

At the 2014 Road School, this presentation focused on the proposed sliding of the Milton-Madison Bridge, a 15000 ton truss superstructure intended to move laterally 55 feet from a temporary location onto permanent piers. The project was a joint procurement between INDOT and KYTC, with a Design/Build team consisting of Walsh Construction, Buckland and Taylor, and Burgess and Niple performing the slide. The presentation was in early March, with the slide scheduled for later in the month. The slide will be the largest of its kind.

Ada Prowag Status And Common Issues/Solutions, Stephen G. Metzer Aicp, Pws

Purdue Road School

The Proposed Accessibility Guidelines for Pedestrian facilities in the Public Right-of-Way (aka PROWAG), dated July 26, 2011, went through an extensive public comment period that ended in early 2012. The Access Board anticipates issuing final guidance that will be the enforceable standard for facilities in the public ROW. This presentation will provide the latest status of the guidelines and present common problems and creative solutions.

Most Common Errors For Ada Ramp Construction, Stephen G. Metzer Aicp, Pws

Purdue Road School

Curb ramps are essential for persons with disabilities to traverse pedestrian facilities, allowing them to get from street level to the sidewalk. Errors that occur during the construction of curb ramps can result in ramps that are non-compliant with the Americans with Disabilities Act (ADA) guidelines. This presentation will include examples of common sidewalk construction errors and offer ways that project engineers can assess existing ramps to identify cases where additional design assistance may be required.

I-65 South Split Continuously Reinforced Concrete Pavement, Tommy E. Nantung

Purdue Road School

Continuously reinforced concrete pavement (CRCP) is constructed with reinforcing steel placed in along the entire length of the pavement. CRCP forms tight transverse cracks to evenly transfer loads without the need of contraction joints. The result is a continuous, smooth-riding pavement surface capable of accommodating heavy traffic loads in a severe environmental condition. First constructed in Indiana more than 75 years ago on US-50, CRCP became popular with the construction of the Interstate Highway system in the 1960s and 1970s. Many sections of interstate and non-interstate highways constructed at that time are still in service today, having outperformed their original …

Ada Focused Construction Inspection, Erik Seef, Eryn Fletcher

Purdue Road School

This presentation will introduce inspection guidelines for field staff to implement in inspecting projects with pedestrian facilities, including curb ramps and pedestrian signals. Review of new INDOT curb standards and requirements for accessible pedestrian signals will be included. These recent changes in standards will impact projects and thus it is imperative to advise field staff of what they should be looking for with regard to width and slopes on pedestrian access routes and pedestrian push buttons. Several issues have been noted in the field, including excessive cross slope and running slope, installation of fingertip-actuated push buttons, and substandard level landings …

Tools For Improving Your Workplace, Ray W. Wilson

Purdue Road School

In this fast-paced session, learn eight practical tools that will help you conduct better meetings, gather, analyze and present data about your organization, and experience how a group can use these tools to quickly learn the causes of problems and to decide where to focus effort.