Engineering Commons^™

Real-Time Measurement Of Lung Motion For Ct Guided Lung Biopsies, A. Al Saqer, A. Cerniuk, W. Houk, D. Patel

Capstone Design Expo Posters

The objective of this project is to develop a device that allows a physician to view and measure real time lung motion of a patient inside a CT scanner during lung biopsy. This will increase time efficiency and accuracy of lung tumor treatment CT procedures, as this device will enable the collection of clear and meaningful scans. With this application, size and simplicity are of the utmost importance, as the device must be as practical as possible. Given these constraints the design involves a low profile, low volume sensor to measure data while physically attached to the patient’s bed, and …

Collision Avoidance For Quadcopters, Andrew Ward, Brad Clifford, Shane Gifford, Thomas White

Capstone Design Expo Posters

The purpose of our project is to design and implement an obstacle detection and avoidance system for use on multirotor drones. The system gathers information from two Arducam 5MP cameras, using stereoscopic vision as the primary obstacle detection source. It also uses an XL-MaxSonar-EZ3 ultrasonic sensor as a backup, in case the cameras fail to detect an obstacle. All three of these sensors will be mounted to the drone using a 3D printed mounting bracket, to ensure consistency of sensor information. The system will interface with the Naza-M v2 flight controller, overriding the user controls when the user attempts to …

Engineering Research Review 2017, Office Of Engineering Research

Engineering Research Review

Contents:
[Page] 2 New sensor design more accurately determines blood glucose levels
[Page] 4 Capping material helps alum inactivate phosphorus in lake water
[Page] 6 Statistician develops efficient predictive algorithms
[Page] 8 Timber bridges viable option for county, township roads
[Page] 11 Structural engineers test fully precast concrete bridge for local roads
[Page] 12 Remaining-useful-life algorithms enhance lithium-ion battery management system
[Page] 14 Balancing energy demand can reduce peak power usage
[Page] 16 Engineering researchers win college, university awards

Inspire Newsletter Summer 2017, Missouri University Of Science And Technology. Inspire - University Transportation Center

INSPIRE Newsletters

No abstract provided.

Inspire Newsletter Winter 2017, Missouri University Of Science And Technology. Inspire - University Transportation Center

INSPIRE Newsletters

No abstract provided.

Low Cost, Adhesion Strength Based Cell Sorter, Emily Burtch, Franck Kamga-Gninzeko, Devin Mair, Sarah Saunders

Capstone Design Expo Posters

In many in vitro experiments, primary cells are harvested from an animal species to undergo experimental manipulation and subsequent analysis. Cell sorters are a luxury to have after cell harvesting to ensure pure populations of cells. Recently, it was discovered that different cell types adhere to cell culture dishes at different strengths. This observation was utilized in the invention of a cell sorting system that sorts cells based on this adhesion strength difference. The resulting system is marketable at under $2000, compared to $50000 plus for current commercially available systems, and is the first commercially-oriented cell adhesion strength based cell …

Company Health Dashboard, Zachary Raney, Ahmad Shahir Abdul Satar

Capstone Design Expo Posters

Company Health Dashboard is a web application that serves as a tool to display information in dynamic grid-like modules. This application displays viewer-friendly information on the televisions around the company office using Raspberry Pi devices. In order to benefit different types of users, the application divides the screen into multiple customizable modules, with each module representing different information. Company employees, for example, can view information about company news, upcoming events, or even what’s on tap for that day. Visitors or clients, on the other hand, can see information about the company while waiting for their meeting.

The design of the …

Stackintheflow: Stackoverflow Search Engine, John Coogle, Jeet Gajjar, Chase Greco

Capstone Design Expo Posters

Programmers increasing rely on an Integrated Development Environment (IDE), which offers capabilities for writing, debugging and testing code. Most developers, ranging from novices to pros, reference outside sources when developing, such as the popular Q&A site StackOverflow. In the 2016 StackOverflow Developer Survey it was observed that 78% of survey participants visited StackOverflow at least once a day, with 58% visiting multiple times a day. The purpose of the StackInTheFlow software development tool is to reduce the amount of time and interruption necessary to gather external information during development. This enables the developer to remain in-the-flow of solving software engineering …

Optically Transparent Antennas And Filters, Ranjita Timsina, Joshua Pitchford, Michelle Guzman, Supapon Hia

Capstone Design Expo Posters

As society continues to increase its demand for wireless network access, more antennas, base stations, and network access points is a must. By integrating these antennas into existing infrastructure, such as buildings, cars, and street lights, network engineers can begin to meet these demands. In order to integrate antennas into windows, optical transparency is paramount. Optically transparent antennas are currently created through materials known as Transparent Conductive Oxides (TCOs). TCOs are doped metal oxides that have high optical transmittance and low electrical resistivity. TCOs are employed in flat panel displays, touch sensitive control panels, and electromagnetic shielding windows. The most …

Portable Pure-Tone Audiometer, Zachary Conner, Zachary Clute, Min Su Ju, James Le

Capstone Design Expo Posters

This project addresses the issue of making hearing tests available to more people, specifically those who live in parts of the world where audiologist are not readily available. Most countries around the world, including first-world countries, have a large gap in hearing testing when put in the perspective of the amount of hearing loss in their people. Most portable audiometers only perform air conduction hearing tests, yet physicians are in need of vital bone conduction information for proper diagnosis. To address this need, we developed an audiometer that is portable, yet also supports air and bone conduction testing. Features that …

Venus Lander Design, Garon Morgan, Brian Rodrigues, Dhruv Sachani, Jason Scott

Capstone Design Expo Posters

The students designed an Entry, Descent, and Landing (EDL) system for a lander to reach the surface of Venus. The students used a combination of 3D modelling and programming to design the EDL within given constraints under specific tolerances. An EDL takes into consideration entry flight dynamics, aeroheating, and landing systems. The EDL was divided into three stages (see below). The separation of stages was designed to address unique challenges found at different points throughout the EDL. The primary objective of the first stage was to minimize the heat associated with the entry velocity to the payload. The second stage …

Ergonomic Immobilization Frame For Radiotherapy, Raheel Ahmed, Travis Alford, Talal Almutairi, Kaleem Farooq

Capstone Design Expo Posters

The primary purpose of this project is to demonstrate that patients can be safely immobilized using air in the general torso area so that radiation can be administered to that region. The primary target will be to treat tumors in the lungs and liver. By immobilizing patients during treatment it allows for the radiation to be consistent in targeting the desired region of the body, which would not be the case if the patient was moving. Air was chosen as the desired medium to immobilize the patient because of comfort and it provides an easy medium for radiation to travel …

Annual Report 2016-2017, Depaul University College Of Computing And Digital Media

CDM Annual Reports

The College of Computing and Digital Media has always prided itself on curriculum, creative work, and research that stays current with changes in our various fields of instruction. As we looked back on our 2016-17 academic year, the need to chronicle the breadth and excellence of this work became clear. We are pleased to share with you this annual report, our first, highlighting our accomplishments.

Last year, we began offering three new graduate programs and two new certificate programs. We also planned six degree programs and three new certificate programs for implementation in the current academic year. CDM faculty were …

Compressible Media For Water Treatment, Christine Forkins, Steven Kammermeier, Antonio Musso

Capstone Design Expo Posters

Tertiary water treatment is used to remove total suspended solids (TSS) from wastewater. Suez uses compressible media for their tertiary water treatment. There have been supplier issues in the past such as unreliability, long lead-times, unknown manufacturing process, and chances of resale. The chance of resale is an important issue because the specifications may change from one supplier to another.

The group was tasked to characterize different types of compressible media for water treatment, design a lab scale filtration unit, and design and manufacture a new media to be tested. In order to gain an operational expenditure advantage, Suez accomplishes …

Rolatube Deployment System, Zachary Allin, Zachary Ratliff, Nathaniel Trepatschko, Jeffrey Wilson

Capstone Design Expo Posters

The team has been tasked with designing a compact mechanism capable of deploying and retracting the Rolatube horizontally and vertically at a controlled rate in confined spaces (i.e. tank housing structures). Because workers are confined to tight quarters, a mechanism to aid in common activities is at times required. The mechanism will allow for tool deployment with attachments for easily sending tools and utilizing cameras. It will also be used to assist workers in stringing lights, keeping wires organized, and delivering hoses and tubes. This design will allow workers at Newport News Shipbuilding (NNS) to save time and energy while …

Foodi - Automated Ordering System, Zachary Stone, Daniel Evans, Kevin Bierlein

Capstone Design Expo Posters

We worked for BeSprout Technology to create an automated ordering system called Foodi. The Foodi system uses a combination of Java, IBM Watson, and MySQL to gather all the necessary information needed for the conversation, and is dynamic so it can be used in multiple restaurants. Many people still place orders via a phone call, so in an effort to streamline the ordering process, this project was created to enable automatic order placing so employees can focus on other tasks within the restaurant.

When a customer calls a restaurant, Foodi will take care of any orders and answer questions the …

Internal Medicine, Keroles Hakem, Robert Trachy, Khanh Tran

Capstone Design Expo Posters

Our objective was to develop a model to predict the length of stay of patients using data from MCV. We conducted our analysis using a dataset of over 130,000 patients described by 66 features. The features contained clinical characteristics (e.g. diagnosis), facility characteristics (e.g. bed type), and socioeconomic characteristics (e.g. insurance type). Our study was focused on patients that stayed in the hospital. To cope with data imperfections, such as missing data, we applied data cleaning methods. Using learned domain knowledge, we identified 9 features to build our predictive models: admit source, primary insurance, discharge disposition, admit unit, iso result, …

Women In Science 2017, Clark Science Center's Summer Research Fellows Program

SURF Abstracts (Women in Science)

Ever since its 1967 start, SURF has been a cornerstone of Smith’s science education. Women in Science 2017 summarizes research done by Smith College’s SURF Program participants during the summer of 2017. 151 students participated in SURF (144 hosted on campus and nearby eld sites), supervised by 58 faculty mentor-advisors drawn from the Clark Science Center and connected to its eighteen science, mathematics, and engineering departments and programs and associated centers and units. At summer’s end, SURF participants summarized their research experiences for this publication.

Connected Fpga Thermal Monitoring, John Schultz

Undergraduate Research Posters 2017

Field Programmable Gate Arrays (FPGA) are configurable integrated circuits. One area that is very important in integrated circuits is temperature control. Improper heat control can lead to a decreased lifespan and possible failure of the device. Many different circuits can be created on the FPGA to suit a specific project or need. Due to FGPAs being configurable, it is hard to create efficient cooling methods. Our project seeks to monitor the FGPA's temperature with different configurations to eventually increase the efficiency of the thermal management system. To accomplish this, we programmed a system on the chip system onto the FPGA …

P1: Using Modified Dean Flow Designs To Increase Mixing Performance, Joshua Clark

Undergraduate Research Posters 2017

We are using numerical solutions for the Navier-Stokes equations and the concentration - diffusion equation to model fluid flow and reactant distribution in serpentine type channels for micromixers/microreactors development. These mixers exploit centripetal forces on the fluid to induce cross-sectional fluid mixing, aka Dean flows. Various modifications are used to increase the mixing character of these crosssectional flows. We found that the performance of these mixers exceeds that of unmodified channels and we currently assess their performance relative to other state of the art methodologies used to induce mixing on the microscale.

P2: Implementation Of Groove Based Designs For Engineering Fluid Flow In Micromixers, Tahir Butt

Undergraduate Research Posters 2017

Mixing on microscale is important for the development of miniaturized chemical reactors that use small quantities of reactants and allow better control over the reaction conditions and products. Nevertheless, achieving rapid mixing in this type of micro-reactors is challenging due to the lack of turbulence and slow diffusion on the microscale. In this work we implement micromixers designs based on surface groove/ridge patterns targeted at inducing cross-sectional flows that both extend the interface between the different reactants, as well as induce chaotic advection. We discuss the fabrication of these structures using soft-lithography in PDMS employing a mold and their optical …

Going Green: Experimental Adaptation Of Scenedesmus Dimorphus To Marine Conditions, Mohammed Khalil

Undergraduate Research Posters 2017

Algae has gained some interest as the need for alternative fuels becomes more pressing. Reliance on fossil fuels is causing our environment and economy harm, and is not sustainable moving forward. Lipid rich algae strains can be used in the production of biofuels, and provide an alternative fuel source. One challenge facing the prospect of algae as a fuel source is that lipid rich algae grows exclusively in freshwater. Considering the scarcity and cost to use freshwater for algae growth, interest has grown in the possibility of adapting lipid rich, freshwater algae to a seawater environment. Seawater can have up …

Evaluation Of Cetane Values Of Glycerolipids Extracted From Algae Scenedesmus Dimorphus Grown In Various Salinity Concentrations Using Gas Chromatography And Mass Spectrometry (Gc-Ms), Paul Lin, Chandana Mannem

Undergraduate Research Posters 2017

Algae's ability to store lipids, renewability, and potentially safer for the environment has made it a promising alternative fuel source. An industry rating for a biofuel's potential is the cetane value, which is a measure of a fuel's quality related to various glycerolipid concentrations. Growing conditions will affect lipid profile in algae, thereby affecting the cetane value. This project will attempt to identify changes in the centane value of the algae Scenedesmus dimorphus grown in various salinity concentrations. Scenedesmus dimorphus is the algae chosen for this experiment because of its ability to rapidly grow under harsh conditions. In this experiment …

P1: Salt Concentration And Ph Affect The Size Of Elastin-Like Polypeptide Nanoparticles, Bryce Noe, Ilona Tsuper, Daniel Terano, Richard Schmitt

Undergraduate Research Posters 2017

The transport of therapeutic drugs to specific tissues in the body can be accomplished using nanoparticles that encapsulate the drugs. Elastin-like polypeptides (ELP) is a class of materials that can reversibly form such nanoparticles in response to environmental cues. FLPs transition from soluble compounds to a phase separated system under particular solution conditions and have been used to produce temperature responsive surfactants. When these ELP surfactants are above their transition temperature, they spontaneously form energetically stable spherical micelles. When the temperature drops below the transition temperature, the micelles break apart and the ELP goes into solution. The size of these …

P2: Light Scattering Study Of The Size And Shape Of Mixed Elastin-Like Polypeptide Micelles, Ilona Tsuper, Daniel Terrano, Bryce Noe

Undergraduate Research Posters 2017

Elastin-Like Polypeptides (ELP) can be used to form thermoreversible vehicles for drug delivery systems. The ELP nanoparticles are composed of three-armed star polypeptides. Each of the three arms extending from the negatively charged foldon domain include 20 repeats of the (GVGVP) amino acid sequence. In addition, linear constructs composed of 40 repeats of the same (GVGVP) sequence are introduced into the system. The mixed ELP polymer system is soluble at room temperature and becomes insoluble at the transition temperature (~ 50°C) forming micelles with the foldons on the exterior and linear constructs at the core. Above the transition, the size …

P2: Dispersion Stability Of Dna-Wrapped Carbon Nanotubes In Biological Media, Fjorela Xhyliu

Undergraduate Research Posters 2017

Single-wall carbon nanotubes (SWCNTs) are among the most widely studied artificial nanomaterials. Their dispersion stability in biological media is a prerequisite for applications development in biomedical imaging and sensing. This project investigates the dispersion stability of DNA-wrapped SWCNTs in RPMI cell culture media with and without fetal bovine serum (FBS). The synthetic SWCNT mixtures were purified into semiconducting enriched fractions and various single species including (11,1), (9,4), and (7,3) using recognition DNA sequences by a polymer aqueous two-phase (ATP) separation method. The near-infrared (NIR) fluorescence, vis-NIR absorption, and pH of DNA-SWCNT dispersions in different biological media were monitored over time. …

Spurious Grain Formation Due To Convection At Cross-Section-Changes During Directional Solidification, Noah Weber, Masoud Ghods

Undergraduate Research Posters 2017

Turbine blades are a critical component in high powered gas turbine engines. These components are directionally solidified to have a single grain orientation, which allows them to operate under high temperature and stress conditions. Spurious grain formation is a major concern when forming these turbine blades. The purpose of this study was to study the effect convection has on forming these defects within turbine blades. Two alloys, Pb-5.8%Sb (solutally unstable) and Al-19%Cu (solutally stable) were directionally solidified upward in a positive thermal gradient (thermally stable) in a graphite crucible having abrupt cross-sectional area change from 3.2 mm diameter to 9 …

P1: Assessment Of Metabolism-Induced Hepatotoxicity On A 384-Pillar Plate, Yana Sickar, Soo-Yeon Kang, Pranav Joshi, Kyeong-Nam Yu

Undergraduate Research Posters 2017

Microarray bioprinting technology has been explored to create miniaturized 3D cell cultures on a 384-pillar plate, which were combined with drug metabolizing enzymes (DMEs) and test compounds in a 384-well plate for metabolism-induced toxicity assays. Our goal in this study was to demonstrate rapid assessment of metabolism- induced toxicity on the 384-pillar plate and obtain reliable and highly predictive information on compound's hepatotoxicity in vivo. Briefly, human cells including Hep3B human hepatoma cell line as well as human embryonic kidney 293 (HEK 293) cell were encapsulated in alginate-Matrigel on the 384-pillar plate. Test compounds and six different DMEs including cytochromes …

P2: Construction Of Weather Station For Measuring Wind Using A Hovering Drone Network, Adam Stead, Mark Travis, Rishi Maheshwari

Undergraduate Research Posters 2017

Our research aims to build and test the effectiveness of the Sparkfun® Weather Station in its ability to record meaningful data while streaming to a remote device in real-time. This is motivated by our plans to utilize a hovering-drone system to collect meteorological data, such as wind speed, wind direction, humidity, pressure, and temperature. This data is essential to evaluate the wind profiles of a given area and assess available wind resource. The weather station was first calibrated by comparing measurements of the cup anemometer against a standard pitot tube in the lab. We found that the measured wind speed …

Development And Verification Of A Mechanical Loading Device For Microfluidics, Stefan Habean, Erin Tesny

Undergraduate Research Posters 2017

Establishing the role that mechanics play in nerve cell (e.g. neurons) function requires experimental testing. Microfluidic based experiments are commonly used to study neuron growth and function, and studies have found mechanics to play an important role in neuron health. External loads can be applied to a microfluidic device using a motor, which presumably influences the mechanical environment of the cells. While a motor can easily apply known displacements, a “load cell” is necessary to measure corresponding forces. In an existing prototype microfluidic loading device, a load cell was integrated and verified. The manufacturer's calibration of the load cell was …