Engineering Commons^™

Materials Of Lightweight Concrete Research, Meganne Chapman, Kathryn Burns, John Grubb

Williams Honors College, Honors Research Projects

The objectives for this research project are to explore options for innovative and sustainable materials in lightweight concrete. Various materials including granite powder, hydrated lime, latex, and recycled glass beads will be used in the concrete testing for this project. The question the team wants to answer is how these additives affect the concrete’s mechanical properties. Weekly mix designs will be performed, and control cylinders will be compared to experimental cylinders. Compression and tensile testing will also be performed to further aid the research. The motivation for performing this research is to aid mix development for the University of Akron …

The Effects Of Phoslock And Water Treatment Residual On Phosphate Concentration Levels And Phosphate Adsorption, Anna Soehnlen

Williams Honors College, Honors Research Projects

Eutrophic, nutrient enriched water can induce adverse effects like harmful algal blooms (HABs) in aquatic ecosystems. Numerous studies have been conducted to control nutrients like phosphorus and nitrogen in order to mitigate the growth rate of HABs. During the spring semester of 2023, a research project investigated if the bentonite clay product, Phoslock, was able to remove phosphorus when it was added to distilled water and surface water under laboratory conditions. The researchers noted potential deficiencies in Phoslock’s ability to decrease the concentration of phosphorus while maintaining the initial value of adsorbed phosphorus. Expanding from this past research, two additional …

Safe Kids Car, Nathan Keenan, Jackson Piper, Kyle Law, Anthony Meniru

Williams Honors College, Honors Research Projects

The main goal of this project is to retrofit toy vehicles, such as Powerwheels cars, with safety systems that can protect the driver and those around the driver. Such systems will include lights, including headlights and taillights, and an automatic braking system, which will activate in the face of an inevitable collision. The system will also work with the driver to prevent collisions, providing warnings of impending danger.

Keywords: toy vehicles, collision detection, collision avoidance, automatic braking system, DC motors, automatic headlights.

Implementing Systems Engineering Practices To The Zips Aero Design Team, Kaitlyn Bebb, Ariel Bryan

Williams Honors College, Honors Research Projects

The Zips Aero Design Team is a college sponsored design team that competes each year through the American Institute of Aeronautics and Astronautics (AIAA) Design Build Fly (DBF) competition. The rules generally consist of 3 differing flight missions and a ground mission, with overarching requirements such as size, takeoff distance, and battery limitations. A complex set of rules such as these is meant to be difficult for even the best of teams to master, especially without proper organization and project management. This senior design report outlines the benefits of implementing systems engineering to the Zips Aero Design Team, through multiple …

Botsitter, Maria Hatzis, Gregory Blondheim Jr., Marian Bonto, Brett Jacobsen

Williams Honors College, Honors Research Projects

As society progresses into an era where both parents work, whether it is online or in person, children in the home may be put in dangerous situations if they are not given the attention they need. The BotSitter is an automated system that follows the child around and makes an audio alarm to alert both the child and the nearby guardian. Using RSSI trilateration, predetermined danger areas, and embedded controls, the BotSitter will be able to follow the child. The device can manage to keep track of the child for the guardian while being almost completely automated outside of setup.

An Analysis Of The Influence Of Speed On Fatal Accidents In Ohio, Megan Johnson

Williams Honors College, Honors Research Projects

Through data collected by NHTSA and FARS, Ohio crash data resulting in fatalities were analyzed through four different breakdowns to determine variables correlating to the fatalities. The breakdowns include dividing data from overall Ohio data, reports involving speeding, then from there to single-vehicle crashes. That data was divided down to only include male drivers and then finally only motorcycles. This data was analyzed as it was broken down to find trends with each category. Through these analyses, the trends were developed to suggest recommendations to implement through education and laws to help reduce the number of crashes resulting in fatalities.

4wd Baja Upright And Wheel Hub, Nathan Thompson, Jonathan P. Larson, Spencer D. Compan

Williams Honors College, Honors Research Projects

The University of Akron Zips Baja Team has switched to a 4-wheel-drive (4WD) vehicle as per the 2023 Baja Society of Automotive Engineers (SAE) rules. The 2022 Baja Vehicle was 2WD, thus the upright and wheel hub were designed exclusively for a 2-wheel-drive (2WD) Baja vehicle. This report entails the design process and methods of verification for the design of the 4WD upright and wheel hub.

Liquid Tab, Nathan Hulet

Williams Honors College, Honors Research Projects

Guitar transcription is a complex task requiring significant time, skill, and musical knowledge to achieve accurate results. Since most music is recorded and processed digitally, it would seem like many tools to digitally analyze and transcribe the audio would be available. However, the problem of automatic transcription presents many more difficulties than are initially evident. There are multiple ways to play a guitar, many diverse styles of playing, and every guitar sounds different. These problems become even more difficult considering the varying qualities of recordings and levels of background noise.

Machine learning has proven itself to be a flexible tool …

Wireless Kick Pedal, Jacob Wise, Ryan Kinyo, Bradley Toth, Ian Zanath

Williams Honors College, Honors Research Projects

The goal of the project is to build a wireless kick pedal that allows accessibility to drummers that have leg or foot disabilities and add versatility to multi-instrumentalists looking to add percussion while playing another instrument. The proposed pedal is designed in two main parts, a wearable band that tracks the player’s movement, and a hammer mechanism that receives actuation commands from the wearable band to move the hammer and deliver a drumbeat. The band is designed to be worn on several parts of the body, including the ankle, knee, thigh, or even the arm depending on the user’s situation. …

Architectural Paint Tank Cleaning, Callie Ruppen

Williams Honors College, Honors Research Projects

Architectural paint is highly susceptible to bacterial contamination, so material preservative ingredients are added during production to prevent bacterial contamination which can lead to wet-state spoilage of paint. In recent years however, paint formulations have reduced or eliminated volatile organic compounds (VOC) and regulations on the use of material preservative ingredients have been increased, reducing the use of traditional material preservatives. As a result, the coating industry must focus on improving microbial control through manufacturing hygiene programs including process tank cleaning and sanitization. While requirements for tank cleaning are clearly outlined in standard operating procedures (SOPs) and internal standards, there …

Anti-Freeze Double Network Hydrogels, William Gross

Williams Honors College, Honors Research Projects

Three polyethylene glycol (PEG) based crosslinkers with repeat unit nominal weights of 62.1, 200, and 400 g/mol in agar/PAM double network (DN) hydrogels were used to study the effect of different crosslinkers on thermal and mechanical properties. Using the one-pot synthesis method, hydrogels with the PEG crosslinkers or methylene-bis-acrylamide (MBAA) were made via sol-gel transition for formation of agar network, and photopolymerization of the PAM network using Irgacure 2959 as photo initiator. Tensile and compression tests were performed on as prepared, swollen, and swollen & cooled specimens of each hydrogel. Freezing time and thermal imaging were performed in -20 °C …

Cross-Seeding Of Protegin-1 And Amyloid Beta To Inhibit Amyloid Beta Aggregation, Sarah Robinson

Williams Honors College, Honors Research Projects

Amyloid beta (Aβ) is considered a major component in the progression of degenerative disease like Alzheimer’s disease. In an attempt to cure Alzheimer’s before it has presented, this project proposes a study on the effects of protegrin-1 (PG-1) on the aggregation of Aβ. By cross-seeding to form a PG-1- Aβ heterocomplex, it is believed that aggregation of Aβ on the human brain can be inhibited, thus helping to stop the neurodegeneration caused by Alzheimer’s disease. To complete this project, an initial literature review of previous work done by the graduate student leading the project will be completed. After this, experiments …

Human Tracking Function For Robotic Dog, Andrew Sharkey

Williams Honors College, Honors Research Projects

With the increase the increase in automation and humans and robots working side by side, there is a need for a more organic way of controlling robots. The goal of this project is to create a control system for Boston dynamics robotic dog Spot that implements human tracking image software to follow humans using computer vision as well as using hand tracking image software to allow for control input through hand gestures.

Design Of Force Indicator For Ballistic Armor Trauma Pad, William Keenan, Anthony Cinalli, Patrick Kennedy

Williams Honors College, Honors Research Projects

The purpose of the Force Indicator for Ballistic Armor Vests is to obtain an approximate value for the impact a bullet delivers through a trauma pad after the Kevlar layer stops the initial bullet. This approximation will be applied in the field to assist in medical treatment of gunshot wounds. The indicator is made from a pressure-sensitive film located behind the Kevlar layer and trauma pad, and it can be easily removed in the field for examination. The impact vest and force indicator are self-contained for ease of implementation. The device will be tested with 9mm, .22 Long Rifle, and …

Does The Ite Trip Generation Manual Overestimate The Trip Generation Of Stores In Northeast Ohio?, Shawn Monahan

Williams Honors College, Honors Research Projects

This project will examine the use of the Trip Generation Manual to estimate the number of 'trips' per average weekday. A trip is defined as a vehicular movement from one location to another. The Trip Generation Manual will examine the estimated number of trips generated for local discount superstores in the Northeast Region of Ohio. Surveys were completed for local data, supplemented with a vehicle occupancy rate sample. This will provide a baseline that the Trip Generation Manual will be compared to.

Wetting Transition Of Texturized Surfaces, Jenna Stephens

Williams Honors College, Honors Research Projects

Building on previous research, this project aims to continue the investigation of the wettability of various liquids on a uniform, texturized surface. Different surface energies can impact the wettability of a surface. The surface can be hydrophilic, hydrophobic, or in between. The goal of this project is to research how features of texturized surfaces affect the wetting transition of water, oil, and a mixture of both. Additionally, this project aims to improve the quality of the 3D printed surfaces. The surfaces that will be studied are constructed using UV cured resin 3D printing and are made up of an array …

Neonatal Intraocular Injection And Delivery System, Nina Treacher, Cory Ramsey, Marie Kosco, Jackson Carrell

Williams Honors College, Honors Research Projects

The proposed project is a way to deliver liquid medicine into the neonatal eye to prevent retinal detachment with lower risk for bacterial infection and drug misplacement. Currently, ophthalmologists use diabetic needles to introduce medication to the neonate eye. They estimate the injection location with hand-held calipers. This may allow the medicine to be misplaced from poor needle placement and introduce preventable error. The goal is to improve the delivery system ophthalmologists currently use by investigating ways to alter or enhance commonly used injection systems to make the procedure safer and more effective.

Whiteboard Drawing Device, Stefan Ilic, Andrew Adams, Vaughn Richards, James Medved

Williams Honors College, Honors Research Projects

Whiteboards have become a staple in many classrooms, especially in the context of STEM courses. However, when it comes to teaching complex topics, it can be difficult or impractical to provide accurate drawings and visualizations by hand, and in extreme cases may lead to misinterpretation of a particular topic. To fix this issue, the Whiteboard Drawing Device allows users to draw preset shapes to a whiteboard automatically, both quickly and accurately. Using either a smartphone application or a set of onboard controls, the device allows users to automatically draw straight lines, rectangles, triangles, sinusoidal waves, and circles on the whiteboard. …

Enhancing Dental Aligners With Direct 3d Printing Manufacturing, Erin Clark, Lauren Ickes, Tyler Madison

Williams Honors College, Honors Research Projects

Replacement of thermoforming with direct 3d printed aligners, molding appliances for dental and alveolar movement. Currently the process involved requires 3d printing models and plastic thermoforming, trimming and polishing to fabricate the end product. If possible a product that could be 3d printed that had stress retention, crack resistance, and stain resistance properties delivered in thickness between .030 and .040 inches.

Side Cutting Biopsy Needle For Endoscopes, Cade Smarr, Ella B. Brinkman, Christine Skakun, Vincent Grosso

Williams Honors College, Honors Research Projects

Develop a side cutting biopsy needle that fits through the working channel of the endoscope similar to stereotactic needle with syringe suction to overcome the small biopsy samples due to instrument size limitations. The problem users are facing is that the biopsy samples through the endoscope are small secondary to instrument size limitations. The idea for this problem is to develop a side cutting biopsy needle that fits through the working channel of the endoscope similar to stereotactic needle, syringe suction.

Structural Design And Application Of Polymeric Silicon Elastomers, Jacob Wyant

Williams Honors College, Honors Research Projects

The purpose of this project was to determine how the polymeric structure and mechanical properties of this elastomer are affected by the ratio between the polydimethylsiloxane macromolecular chains and the crosslinkers. These were determined via tensile and compression testing. Then, spiropyran was added to observe how this fluorescence and crosslinking agent affected the elastomer. Also, the elastomer’s fluorescent and icephobic nature were tested. The elastomers with a higher ratio of crosslinker to macromolecular chain could withstand higher tensile and compressive strains but failed at lower stresses than their counterparts with lower concentrations of crosslinkers. The elastomers were also found to …

Landing Gear Sealing Solution, Andrew Milligan

Williams Honors College, Honors Research Projects

XYZ Landing Gear Solutions has been tasked with redesigning two internal components of the landing gears for the ABC-123 aircraft program. The customer, ABC Aeronautics, informed XYZ Landing Gear Solutions that a particular system of the landing gear does not meet the necessary performance requirements of the program. As a result, the entire system will have to be removed, facilitating the need for a redesign of the two components that the system interfaced with. The focus of this project will be completing the redesign process for both of these components. “Redesign” and “design” will be used interchangeably in this report. …

Development Of A Regeneratively Cooled Liquid Rocket Engine, Dillon Petty, Nicole Zimmerli

Williams Honors College, Honors Research Projects

An additively manufactured (AM) liquid rocket engine, consisting of an injector, combustion chamber, and nozzle, was designed and printed using state-of-the-art methods and materials. The parts were manufactured using laser powder bed fusion. Additive manufacturing allowed for complex geometries and features, such as printing manifolds onto the components with a reduced number of parts. Additive, regenerative cooling channels were designed into the chamber and nozzle to allow for long-duration steady-state operation.

The feed system for the engine was designed and built to allow for pressure-regulated and steady-state testing. Tanks for the fuel and oxidizer were designed and built for a …

Induced Drag Laboratory Curriculum With Variable Aspect Ratio Wing, Alexander Milligan, Elizabeth Plyler

Williams Honors College, Honors Research Projects

A laboratory curriculum for undergraduate students at The University of Akron enrolled in 4600:413 Introduction to Aerodynamics was created to allow students a hands-on opportunity to study the basic fundamentals of aerodynamically induced drag. To accomplish this, a 3D printed wing was created with variable aspect ratio. This wing is to be utilized in the laboratory experiment in The University of Akron subsonic wind tunnel to generate data on lift on drag at different airspeeds, angles of attack, and aspect ratios. The laboratory curriculum provides basic theory applicable to the wind tunnel experiments as well as question prompts and data …

Surface Preparation Study, Ryan Ferguson

Williams Honors College, Honors Research Projects

This work explores a custom air atmospheric pressure plasma treatment (APPT) machine’s effectiveness in cleaning and chemically activating a CFRP surface. It is explore by implementing water contact angle (WCA) measurements, water-break free (WBF) testing, and adhesive tubular lap-joint (TLJ) tensile testing. An 8x3 test matrix of different machine parameters is defined with the bounding conditions being the machine’s capabilities and industry standard recommendations. Each configuration of the test matrix is explored after treatment at multiple time intervals up to 2 weeks afterwards to gain insight into the outlife of the treatments with the intention of adhesively bonding to the …

Coaxial Beam Eaxle Modeling And Analysis For Gawr Limits, Alexander Cebriak, Jackson Foster, Chris James

Williams Honors College, Honors Research Projects

The goal of this project was to design three different models of a coaxial beam eAxle for a range of electric vehicles. The requirement was to satisfy three different loading conditions, each characterized by a GAWR. These three loading conditions were 3000lb, 7500lb, and 10,000lb. This was done by first creating a model based on a basic outline given by Schaeffler. This model was then analyzed using Ansys®, and then iterated upon by designing new models using the 3D design program Solidworks. The iteration process was continued using more Ansys® analysis, as well as calculations to determine things like bolt …

The Passing Board, John Fitzgerald

Williams Honors College, Honors Research Projects

For my Honors Research Project I am taking a more personal route and looking to solve a childhood question/issue by designing a board that is small and easy to transport while also giving the best bounce pass possible. My proposed project would be a board that a soccer player can play a bounce pass onto and receive the ball from. The base of this design sounds simple enough, however, I would like to implement a way that the board can be adjusted to alter the angle of return of the soccer ball after the bounce. I also want to design …

Running Shoe Pedometer, Benjamin Kasper

Williams Honors College, Honors Research Projects

Running shoe pedometer aims to solve the issue of worn out running shoes. It can be difficult to know just how many miles you have run in your shoes and when a new pair is needed. Running in old shoes and worn out shoes is heavily linked to injury. My proposed project is a device that is powered by the compressive forces on the shoes soles that counts the number of steps the wearer takes using a microcontroller. Then, when the shoe reaches milestone that indicate it has been used 75% 90% and 100% of its expected life, it will …

Amphisbaenian Head Movement And Burrowing Forces In Damp Granular Media, Jacob Newell

Williams Honors College, Honors Research Projects

Damp granular media is a difficult environment to study because it is both practically complex and it lacks equations which fully describe its behavior. In this study, an oscillatory lateral head movement and its effects while penetrating damp granular media were tested using a robophysical model. This experimental research was inspired by the burrowing behavior of the clade Amphisbaenia, a group of usually limbless squamates that employ a variety of different burrowing behaviors, but it can apply to a wide range of burrowers. This research could help with both human burrowing technologies and the further investigation of animal behaviors.

The Impact Distracted Driving Has On Fatal Crashes, Adam Pohrte

Williams Honors College, Honors Research Projects

Distracted driving has been a major problem in the United States and around the globe for quite some time. It is one of the leading causes of fatal car crashes, and its impact on road safety has been the subject of much research and debate. The purpose of this paper is to focus on the driver who was distracted that ended up causing the crash. To obtain precise data and results, all the information about these crashes is from the Fatality Analysis Reporting System (FARS). FARS is a nationwide census maintained by the National Highway Traffic Safety Administration (NHTSA) that …