Engineering Commons^™

Additives For Heat Transfer Enhancement In High Temperature Thermal Energy Storage Media: Selection And Characterization, Philip D. Myers Jr.

USF Tampa Graduate Theses and Dissertations

Inorganic salts are very promising as high-temperature heat transfer fluids and thermal storage media in solar thermal power production. The dual-tank molten salt storage system, for example, has been demonstrated to be effective for continuous operation in solar power tower plants. In this particular storage regime, however, much of the thermal storage potential of the salts is ignored. Most inorganic salts are characterized by high heats of fusion, so their use as phase-change materials (PCMs) allows for substantially higher energy storage density than their use as sensible heat storage alone. For instance, use of molten sodium-potassium eutectic salt over a …

Evaluation Of School Vip Latrines And User Preferences And Motivations For Adopting Communal Sanitation Technologies In Zwedru, Liberia, Sarah J. Ness

USF Tampa Graduate Theses and Dissertations

This thesis has three objectives as follows: 1) to investigate VIP latrine design and establish if the communal school VIP latrines located on the shared campus of Tubman Wilson Institute (TWI) Junior and Senior High School and J.C. Barlee Elementary School were properly designed and constructed, 2) to explore the user preferences and motivations impacting the adoption of these school latrines, and 3) to develop a framework for factors that influence latrine adoption. These goals were formed by the author in response to her Peace Corps experience working at a high school in Zwedru, Liberia from August 2012 to August …

Achieving Reliable Generation \& Delivery Of Energy Through Robust Optimization, Anna Danandeh

USF Tampa Graduate Theses and Dissertations

In this dissertation, we elaborate on the inherent risks and uncertainties in power systems and associated industries, and develop practical solution methods to eliminate their adverse effects.

our research agenda consists of practice-driven problems in different stages of power generation as follows. (1) Affordable fuel procurement through developing a comprehensive fuel supply chain design and operations planning system for electricity generation companies, (2) reliable electricity generation through incorporating dynamic asset rating concept in the unit commitment problem, and (3) efficient demand management through proposing a job scheduling model for effective local generation consumption.

Since reliability cannot be compromised in energy …

Analysis And Energy Reduction Of Humanoid Robot Motions – Stand Up And Sit Down, Ercan Elibol

USF Tampa Graduate Theses and Dissertations

This research studies the electrical power reduction and control analysis of various motion tasks of a humanoid robot. These motions include standing up and sitting down. Each motion’s tasks have their stable and unstable phases throughout the complete motion cycle. Unstable phases can be caused by gravity forces and improper handling of the upper body of the humanoid robot leaning too forward or backward. Even though most of the dynamic motions seem to be accomplished very simply by humans; standing up and sitting down could create challenges for humanoid robots. Some of the critical challenges researches face are: dynamic nature …

Rf Mems Resonators For Mass Sensing Applications, Ivan Fernando Rivera

USF Tampa Graduate Theses and Dissertations

Sensing devices developed upon resonant microelectromechanical and nanoelectromechanical (M/NEMS) system technology have become one of the most attractive areas of research over the past decade. These devices make exceptional sensing platforms because of their miniscule dimensions and resonant modes of operation, which are found to be extremely sensitive to added mass. Along their unique sensing attributes, they also offer foundry compatible microfabrication processes, low DC power consumption, and CMOS integration compatibility. In this work, electrostatically and piezoelectrically actuated RF MEMS bulk resonators have been investigated for mass sensing applications. The capacitively-transduced resonators employed electrostatic actuation to achieve desired resonance mode …

Robust, Low Power, Discrete Gate Sizing, Anthony Joseph Casagrande

USF Tampa Graduate Theses and Dissertations

Ultra-deep submicron circuits require accurate modeling of gate delay in order to meetaggressive timing constraints. With the lack of statistical data, variability due to the mechanical manufacturing process and its chemical properties poses a challenging problem. Discrete gate sizing requires (i) accurate models that take into account random parametric variation and (ii) a fair allocation of resources to optimize the solution. The proposed GTFUZZ gate sizing algorithm handles both tasks. Gate sizing is modeled as a resource allocation problem using fuzzy game theory. Delay is modeled as a constraint and power is optimized in this algorithm. In GTFUZZ, delay is …

Self-Assembly Kinetics Of Microscale Components: A Parametric Evaluation, Jose Miguel Carballo

USF Tampa Graduate Theses and Dissertations

The goal of the present work is to develop, and evaluate a parametric model of a basic microscale Self-Assembly (SA) interaction that provides scaling predictions of process rates as a function of key process variables. At the microscale, assembly by “grasp and release” is generally challenging. Recent research efforts have proposed adapting nanoscale self-assembly (SA) processes to the microscale. SA offers the potential for reduced equipment cost and increased throughput by harnessing attractive forces (most commonly, capillary) to spontaneously assemble components. However, there are challenges for implementing microscale SA as a commercial process. The existing lack of design tools prevents …

Laboratory Evaluation Of Organic Soil Mixing, Spencer Dean Baker

USF Tampa Graduate Theses and Dissertations

Organic soils present a difficult challenge for roadway designers and construction due to the high compressibility of the soil structure, the often associated high water table, and the high moisture content. For other soft or loose soils (inorganic soils), stabilization via cement or similar binders (a method called soil mixing) has proven to be an effective solution. To this end, the Federal Highway Administration has published a comprehensive design manual for these techniques. Organic soils, however, are not addressed therein to a level of confidence for design, as organic soils do not follow the trends of inorganic soils. This has …

A Numerical And Experimental Investigation Of Flow Induced Noise In Hydraulic Counterbalance Valves, Mutasim Mohamed Elsheikh

USF Tampa Graduate Theses and Dissertations

The main objective of this study is to explore the complex fluid flow phenomena that result in the generation of a high frequency noise in counterbalance valves through an experimental and numerical investigation of the flow. Once the influence of the different components involved in noise generation is established, a secondary objective is the introduction of design modifications that eliminate the undesired effect without altering the operation envelope or the performance of the valve.

A hydraulic test bench was used to carry out an experimental investigation of the noise generation process. A computer based data acquisition system was used to …

Use Of Anaerobic Adhesive For Prevailing Torque Locking Feature On Threaded Product, Alan Hernandez

USF Tampa Graduate Theses and Dissertations

The purpose of this research is to determine if anaerobic adhesive can be used as a prevailing torque locking feature. Maintaining preload in critical joints is the usual standard that anaerobic adhesives are held to in aerospace and other industry. To test if anaerobic adhesive can be used as a prevailing torque locking feature a test procedure was developed and implemented to measure the removal torque of threaded fasteners after an allotted cure time. In total, 191 threaded fasteners of different material and coatings were tested in the unseated and seated states with various strengths and varieties of anaerobic adhesive. …

A Planar Pseudo-Rigid-Body Model For Cantilevers Experiencing Combined Endpoint Forces And Uniformly Distributed Loads Acting In Parallel, Philip James Logan

USF Tampa Graduate Theses and Dissertations

This dissertation describes the development and effectiveness of a mathematical model used to predict the behavior of cantilever beams whose loading conditions include parallel combinations of evenly distributed loads and endpoint forces. The large deflection of cantilever beams has been widely studied. A number of models and mathematical techniques have been utilized in predicting the endpoint path coordinates and load-deflection relationships of such beams. The Pseudo-Rigid-Body Model (PRBM) is one such method which replaces the elastic beam with rigid links of a parameterized pivot location and torsional spring stiffness. In this paper, the PRBM method is extended to include cases …

Effects Of Solids Retention Time And Feeding Frequency On Performance And Pathogen Fate In Semi-Continuous Mesophilic Anaerobic Digesters, Nathan Daniel Manser

USF Tampa Graduate Theses and Dissertations

Anaerobic digestion is a biochemical process in which organic carbon is biodegraded in an oxygen free environment through a microbial consortium. Engineered biological systems used for resource recovery often utilize anaerobic digestion to treat anthropogenic organic wastes by reclaiming the carbon as energy (methane gas) and a soil amendment (biosolids). Small-scale, or household, semi-continuous anaerobic digesters have been used in developed and developing countries for many decades to produce biogas from human and livestock waste, which is used for heating, lighting, and cooking. This application has been shown to improve the quality of life of the user. Although there is …

Fabrication Of Tissue Precursors Induced By Shape-Changing Hydrogels, Olukemi O. Akintewe

USF Tampa Graduate Theses and Dissertations

Scaffold based tissue reconstruction inherently limits regenerative capacity due to inflammatory response and limited cell migration. In contrast, scaffold-free methods promise formation of functional tissues with both reduced adverse host reactions and enhanced integration. Cell-sheet engineering is a well-known bottom-up tissue engineering approach that allows the release of intact cell sheet from a temperature responsive polymer such as poly-N-isopropylacrylamide (pNIPAAm). pNIPAAm is an ideal template for culturing cell sheets because it undergoes a sharp volume-phase transition owing to the hydrophilic and hydrophobic interaction around its lower critical solution temperature (LCST) of 32°C, a temperature close to physiological temperature. Compared to …

Experimental Investigation Of Encapsulated Phase Change Materials For Thermal Energy Storage, Tanvir E. Alam

USF Tampa Graduate Theses and Dissertations

Thermal energy storage (TES) is one of the most attractive and cost effective solutions to the intermittent generation systems like solar, wind and other renewable sources, compared to alternatives. It creates a bridge between the power supply and demand during peak hours or at times of emergency to ensure the continuous supply of energy. Among all the TES systems, latent heat thermal energy storage (LHTES) draws lots of interests as it has high energy density and can store or retrieve energy isothermally. Two major technical challenges associated with the LHTES are low thermal conductivity of the phase change materials (PCMs), …

Understanding The Role Of Colloidal Particles In Electroporation Mediated Delivery, Alisha Peterson

USF Tampa Graduate Theses and Dissertations

Electroporation (EP) is a physical non-viral technique used to deliver therapeutic molecules across the cell membrane. During electroporation an external electric field is applied across a cell membrane and it causes pores to form. These pores then allow the surrounding media containing the therapeutics to diffuse across the membrane. This technique has been specifically studied as a promising gene and drug delivery system. Colloidal particles have also proven to be promising for a variety of biological applications including molecular delivery, imaging, and tumor ablation, due to their large surface area and tunable properties. In more recent years researchers have explored …

Direct Membrane Filtration Of Domestic Wastewater: Implications For Coupling With Anaerobic Membrane Bioreactor (Df-Anmbr) For Wastewater Resource Recovery, George H. Dick

USF Tampa Graduate Theses and Dissertations

With the growing use of membranes in the water industry, different methods for using membranes to treat water is still occurring. Enhancing membrane performance is generally performed with extensive pretreatment methods before the feedwater is filtered by the membrane. With the utilization of direct membrane filtration (DF), no pretreatment is performed and the membrane is exposed to raw wastewater. While this may suggest that membrane performance and permeate quality would suffer in the process, DF testing with a 0.03 µm ultrafiltration PVDF membrane showed that relatively high membrane flux was sustained while producing a high quality effluent. Due to the …

Ecological Sanitation In Uganda: Promotion Through Demonstration Facilities And Potential For Ascaris Reduction By Free Ammonia Inactivation Using Stored Urine, John Thomas Trimmer

USF Tampa Graduate Theses and Dissertations

As Uganda works to transform itself into an industrialized, middle-income country in the coming decades, the country is faced with a number of problematic trends that could hinder this transition. High population growth and urbanization are quickly forcing small towns to deal with issues of limited space and the aesthetic conditions within sanitation systems, while declining soil fertility in surrounding rural areas calls into question the future nutritional security of the growing population. Ecological Sanitation (Eco-San) systems, which are designed to recover nutrients from human excreta, may help to address these trends.

Improved sanitation coverage in Uganda is currently estimated …

Impedance Measurements As A Means To Improve The Biological Response Of Gene Electrotransfer, Lina Fajardo Gomez

USF Tampa Graduate Theses and Dissertations

When an electric field is locally applied to tissues in vivo the uptake of exogenous DNA can be greatly increased. This approach to gene transfer, called electroporation (EP) or gene electro transfer (GET), has potential applications in the treatment of skin disorders, vaccinations, some types of cancer and metabolic diseases. The eect of electric elds on cells and tissues has been studied and related to the uptake of DNA. Tissue impedance changes have been measured as a result of electroporation. The aim of this study is to explore the predictive accuracy of impedance spectroscopy for the success of GET. Mice …

Metallic Encapsulation For High Temperature (>500 °C) Thermal Energy Storage Applications, Abhinav Bhardwaj

USF Tampa Graduate Theses and Dissertations

Deployment of high temperature (>500 °C) thermal energy storage in solar power plants will make solar power more cost competitive and pave the way towards a sustainable future. In this research, a unique metallic encapsulation has been presented for thermal energy storage at high temperatures, capable of operation in aerobic conditions. This goal was achieved by employing low cost materials like carbon steel. The research work presents the unique encapsulation procedure adopted, as well as various coatings evaluated and optimized for corrosion protection. Experimental testing favored the use of 150 μm of nickel on carbon steel for corrosion protection …

Silicone Elastomer-Based Combinatorial Biomaterial Gradients For High Throughput Screening Of Cell-Substrate Interactions, Greeshma Mohan

USF Tampa Graduate Theses and Dissertations

Biomaterials have evolved over the years from the passive role of mere biocompatibility to an increasingly active role of presenting instructive cues to elicit precise responses at the molecular and cellular levels. Various characteristics common to synthetic biomaterials in vitro and extracellular matrices in vivo, such as immobilized functional or peptide groups, mechanical stiffness, bulk physical properties and topographical features, are key players that regulate cell response. The dynamics in the cell microenvironment and at the cell adhesive interface trigger a web of cell-material and cell-cell information exchanges that have a profound impact in directing the ultimate cell fate …

A Framework For Determining Building Water Cycle Resilience Using A Dynamic Water Resilience Assessment Model (Wram), Caryssa Joustra

USF Tampa Graduate Theses and Dissertations

The aim of this project was to quantitatively measure the resilience of the building water cycle. In order to accomplish this goal, a framework was developed that outlines how building water resilience can be evaluated. The framework presented assumed that resilience describes the fulfillment of system functions; in this case, the system functions considered are those actualized by the building water system. A building water resilience assessment model (WRAM) was developed with the ability to simulate different building water cycles and resilience scenarios. Resilience is dependent on the type and magnitude of a disturbance. Therefore, unique disruption scenarios were developed …

Systems Approach To Producing Electrospun Polyvinylidene Difluoride Fiber Webs With Controlled Fiber Structure And Functionality, Brian D. Bell

USF Tampa Graduate Theses and Dissertations

Polyvinylidene difluoride (PVDF) is a functional polymeric material that can be used for a wide variety of applications. There are many new future applications that were recently suggested for electrospun PVDF fibers. Electrospinning is a process capable of producing nano to micro sized PVDF fibers in a web. It is important to control the structure of the web during electrospinning because by controlling the structure of the web it is possible for the PVDF fiber web to have increased performance in comparison to other common forms of PVDF.

While past scientific literature focused on applications of PVDF fibers, little was …

Enhanced Magnetoimpedance And Microwave Absorption Responses Of Soft Ferromagnetic Materials For Biodetection And Energy Sensing, Jagannath Devkota

USF Tampa Graduate Theses and Dissertations

A combination of magnetic sensors with magnetic nanoparticles offers a promising approach for highly sensitive, simple, and rapid detection of cancer cells and biomolecules. The challenge facing the field of magnetic biosensing is the development of low-cost devices capable of superconducting quantum interference device (SQUID)-like field sensitivity at room temperature. In another area of interest, improving the sensitivity of existing electromagnetic field sensors for microwave energy sensing applications is an important and challenging task. In this dissertation, we have explored the excellent magnetoimpedance and microwave absorption responses of soft ferromagnetic amorphous ribbons and microwires for the development of high-performance magnetic …

Performance Evaluation And Integrated Management Of Airport Surface Operations, Qing Wang

USF Tampa Graduate Theses and Dissertations

The demand for aviation has been steadily growing over the past few decades and will keep increasing in the future. The anticipated growth of traffic demand will cause the current airspace system, one that is already burdened by heavy operations and inefficient usage, to become even more congested than its current state. Because busy airports in the United States (U.S.) are becoming "bottlenecks" of the National Airspace System (NAS), it is of great importance to discover the most efficient means of using existing facilities to improve airport operations.

This dissertation aims at designing an efficient airport surface operations management system …

Task-Based Robotic Grasp Planning, Yun Lin

USF Tampa Graduate Theses and Dissertations

Grasp should be selected intelligently to fulfill different stability properties and manipulative requirements. Currently, most grasping approaches consider only pick-and-place tasks without any physical interaction with other objects or the environment, which are common in an industry setting with limited uncertainty. When robots move to our daily-living environment and perform a broad range of tasks in an unstructured environment, all sorts of physical interactions will occur, which will result in random physical interactive wrenches: forces and torques on the tool.

In addition, for a tool to perform a required task, certain motions need to occur. We call it "functional tool …

Generalized Conditional Matching Algorithm For Ordered And Unordered Sets, Ravikiran Krishnan

USF Tampa Graduate Theses and Dissertations

Designing generalized data-driven distance measures for both ordered and unordered set data is the core focus of the proposed work. An ordered set is a set where time-linear property is maintained when distance between pair of temporal segments. One application in the ordered set is the human gesture analysis from RGBD data. Human gestures are fast becoming the natural form of human computer interaction. This serves as a motivation to modeling, analyzing, and recognition of gestures. The large number of gesture categories such as sign language, traffic signals, everyday actions and also subtle cultural variations in gesture classes makes gesture …

Pseudo-Rigid-Body Models For Approximating Spatial Compliant Mechanisms Of Rectangular Cross Section, Issa Ailenid Ramirez

USF Tampa Graduate Theses and Dissertations

The objective of the dissertation is to develop and describe kinematic models (Pseudo-Rigid-Body Models) for approximating large-deflection of spatial (3D) cantilever beams that undergo multiple bending motions thru end-moment loading. Those models enable efficient design of compliant mechanisms, because they simply and accurately represent the bending and stiffness of compliant beams.

To accomplish this goal, the approach can be divided into three stages: development of the governing equations of a flexible cantilever beam, development of a PRBM for axisymmetric cantilever beams and the development of spatial PRBMs for rectangular cross-section beam with multiple end moments.

The governing equations of a …

Development Of A Reusable Nutrient Recovery System To Sustainably Integrate Small-Scale Sanitation And Agriculture, Jorge Luis Calabria

USF Tampa Graduate Theses and Dissertations

Emerging technologies in sanitation and food production foster the potential to advance progress towards key sustainable development goals of ensuring adequate sanitation and food security to all. Non-Sewered Sanitation Systems (NSSSs), as detailed by the recent International Organization for Standardization’s (ISO) 30500 standard, are being developed to overcome challenges of lacking sanitation infrastructure and resource scarcity by providing autonomous, off-grid wastewater treatment (WWT) service in a much smaller footprints than large centralized treatment facilities. A promising NSSS platform is the anaerobic membrane bioreactor (AnMBR) that can achieve high (WWT) throughput in a small footprint using ultrafiltration (UF) membrane filtration to …

Channel Analysis And Estimation And Compensation Of Doppler Shift In Underwater Acoustic Communication And Mitigation Of Ifi, Isi In Ultra-Wideband Radio, Sadia Ahmed

USF Tampa Graduate Theses and Dissertations

Water occupies three fourth of earth's surface. The remaining one fourth is land. Although human habitats reside on land, there is no denying of the vital connection between land and water. The future sustainability of human species on this planet depends on wise utilization of all available resources, including that provided by the vast water world. Therefore, it is imperative to explore, understand, and define this massive, varying, and in many areas, unexplored water domain.

The water domain exploration and data collection can be conducted using manned or unmanned vehicles, as allowed by the water environment. This dissertation addresses three …

Thermal Assessment Of A Latent-Heat Energy Storage Module During Melting And Freezing For Solar Energy Applications, Antonio Miguel Ramos Archibold

USF Tampa Graduate Theses and Dissertations

Capital investment reduction, exergetic efficiency improvement and material compatibility issues have been identified as the primary techno-economic challenges associated, with the near-term development and deployment of thermal energy storage (TES) in commercial-scale concentrating solar power plants. Three TES techniques have gained attention in the solar energy research community as possible candidates to reduce the cost of solar-generated electricity, namely (1) sensible heat storage, (2) latent heat (tank filled with phase change materials (PCMs) or encapsulated PCMs packed in a vessel) and (3) thermochemical storage. Among these the PCM macro-encapsulation approach seems to be one of the most-promising methods because of …