Engineering Commons^™

Estimating Cargo Airdrop Collateral Damage Risk, Vincent R. Cammarano

Theses and Dissertations

The purpose of this research is to determine an appropriate method for estimating cargo airdrop collateral damage risk. Specifically, this thesis answers the question: How can mission planners accurately predict airdrop collateral damage risk? The question is answered through a literature review and a thorough examination of a data set of real world airdrop scoring data. The data were examined to determine critical factors that affect airdrop error risks as well as to determine the characteristics of airdrop error patterns. Through this research it was determined that bivariate normal distributions with parameters pairs determined by empirical data are appropriate for …

Thermodynamic, Sulfide, Redox Potential, And Ph Effects On Syngas Fermentation, Peng Hu

Theses and Dissertations

Recently, work in ethanol production is exploring the fermentation of syngas (primarily CO, CO2, and H2) following gasification of cellulosic biomass. The syngas fermentation by clostridium microbes utilizes the Wood-Ljungdahl metabolic pathway. Along this pathway, the intermediate Acetyl-CoA typically diverges to produce ethanol, acetic acid, and/or cell mass. To develop strategies for process optimization, a thermodynamic analysis was conducted that provided a detailed understanding of the favorability of the reactions along the metabolic pathway. Thermodynamic analysis provided identification of potentially limiting steps. Once these limiting reactions were identified, further thermodynamic analysis provided additional insights into the ways in which reaction …

Analysis And Mitigation Of Seu-Induced Noise In Fpga-Based Dsp Systems, Brian Hogan Pratt

Theses and Dissertations

This dissertation studies the effects of radiation-induced single-event upsets (SEUs) on digital signal processing (DSP) systems designed for field-programmable gate arrays (FPGAs). It presents a novel method for evaluating the effects of radiation on DSP and digital communication systems. By using an application-specific measurement of performance in the presence of SEUs, this dissertation demonstrates that only 5-15% of SEUs affecting a communications receiver (i.e. 5-15% of sensitive SEUs) cause critical performance loss. It also reports that the most critical SEUs are those that affect the clock, global reset, and most significant bits (MSBs) of computation. This dissertation also demonstrates …

On-Orbit Fpga Seu Mitigation And Measurement Experiments On The Cibola Flight Experiment Satellite, William A. Howes

Theses and Dissertations

This work presents on-orbit experiments conducted to validate SEU mitigation and detection techniques on FPGA devices and to measure SEU rates in FPGAs and SDRAM. These experiments were designed for the Cibola Flight Experiment Satellite (CFESat), which is an operational technology pathfinder satellite built around 9 Xilinx Virtex FPGAs and developed at Los Alamos National Laboratory. The on-orbit validation experiments described in this work have operated for over four thousand FPGA device days and have validated a variety of SEU mitigation and detection techniques including triple modular redundancy, duplication with compare, reduced precision redundancy, and SDRAM and FPGA block memory …

A Correlation-Based Method To Detect Weak Dependence, Yabing Luo

Theses and Dissertations

The focus of this thesis is an investigation of ways to detect weak dependence between two random variables X and Y. Our approach is to design tests for correlation rather than testing for dependence directly, since X and Y are not independent if they are not uncorrelated. We examined the magnified Pearson correlation after the Box-Cox transformation to determine whether X and Y are dependent. The results indicated that our approach not only has the potential to detect and evaluate the weak dependence cases that have previously been intractable, but also is conceptually simple and easy to implement.

Investigation Of Dc Motors For Electric And Hybrid Electric Motor Vehicle Applications Using An Infinitely Variable Transmission, Benjamin Carson Groen

Theses and Dissertations

Since the early 1900's demand for fuel efficient vehicles has motivated the development of electric and hybrid electric vehicles. Unfortunately, some components used in these vehicles are expensive and complex. AC motors, complex electronic controllers and complex battery management systems are currently used in electric (EV) and hybrid vehicles. This research examines various motors and speed control methods in an attempt to help designers identify which motors would be best suited for an EV powertrain application. The feasibility of using DC motors coupled with an Infinitely Variable Transmission (IVT), to obtain an innovative new electric or hybrid electric powertrain is …

Strength And Erodability Of South Carolina Soils For Embankment Construction, Ke Zhou

Theses and Dissertations

When a particular soil from a borrow pit is being used to construct a road embankment, it is important that the strength and erodibility characteristics are known to ensure the embankment has sufficient load capacity and is resistant to erosion by rain or flooding. To evaluate the borrow pit material’s strength and erodibility characteristics, forty five-gallon buckets of soils were collected from fourteen borrow pits in South Carolina. Three buckets were collected at three different locations within each pit.

Fifteen sets of direct shear tests were performed on the selected fifteen buckets of soils. There are six buckets of soils …

Development Of Novel Copolyoxetanes: Antimicrobial Agents, Allison King

Theses and Dissertations

This thesis focuses on solution antimicrobial effectiveness for copolyoxetanes with quaternary ammonium and PEG-like side chains. Ring opening copolymerization of 3-((4-bromobutoxy)methyl)-3-methyloxetane (BBOx) and 3-((2-(2-methoxyethoxy) ethoxy) methyl)-3-methyloxetane (ME2Ox) yielded random copolymers with 14-100 (m) mole% BBOx designated P[(BBOx-m)(ME2Ox)]. Reaction of P[(BBOx-m)(ME2Ox)] with dodecyl dimethylamine gave the corresponding quaternary P[(C12-m)(ME2Ox)] polycation salts, designated C12-m. Mole ratios and molecular weights were obtained from 1H-NMR and end group analysis. Differential scanning calorimetry (DSC) studies showed Tg’s between 69 and -34 °C. Minimum inhibitory concentrations (MIC) against Staphylococcus aureus, Escherichia coli and Pseudomonas aeruginosa showed MIC decreasing with increasing C12 mole% reaching a minimum between …

Active Noise Control Of A Two-Fan Exhaust-Mounted Array Using Near-Field Control Sources And Error Sensors, Ryan Leonard Rust

Theses and Dissertations

Multiple fans are sometimes used in an array configuration to cool various types of electronic equipment. In addition to adding another noise source, using two fans with closely spaced blade passage frequencies (BPF) can create an annoying beat frequency. A two fan array with each fan having a different BPF was considered. The fans were theoretically modeled at the BPF and first harmonics. Each fan has two acoustic paths to the far field. Thus, each fan was modeled as a two source array. The first control configuration consisted of one control filter using six control sources and six error sensors …

Latency And Distortion Compensation In Augmented Environments Using Electromagnetic Trackers, Henry Himberg

Theses and Dissertations

Augmented reality (AR) systems are often used to superimpose virtual objects or information on a scene to improve situational awareness. Delays in the display system or inaccurate registration of objects destroy the sense of immersion a user experiences when using AR systems. AC electromagnetic trackers are ideally for these applications when combined with head orientation prediction to compensate for display system delays. Unfortunately, these trackers do not perform well in environments that contain conductive or ferrous materials due to magnetic field distortion without expensive calibration techniques. In our work we focus on both the prediction and distortion compensation aspects of …

Scanning Laser Registration And Structural Energy Density Based Active Structural Acoustic Control, Daniel Alan Manwill

Theses and Dissertations

To simplify the measurement of energy-based structural metrics, a general registration process for the scanning laser doppler vibrometer (SLDV) has been developed. Existing registration techniques, also known as pose estimation or position registration, suffer from mathematical complexity, instrument specificity, and the need for correct optimization initialization. These difficulties have been addressed through development of a general linear laser model and hybrid registration algorithm. These are applicable to any SLDV and allow the registration problem to be solved using straightforward mathematics. Additionally, the hybrid registration algorithm eliminates the need for correct optimization initialization by separating the optimization process from solution selection. …

The Use Of Building Information Modeling In Generating Hard Bid Estimates, Peter Samuel Jensen

Theses and Dissertations

Building Information Modeling has provided many benefits to the architectural, engineering, construction and facilities management communities. Many studies have been done to validate the asserted benefits, including benefits to the field of estimating. The studies on estimating are currently limited to the realm of conceptual estimates, and have only treated detailed estimates in the abstract. The purpose of this study was to determine how BIM was being used by companies in a hard bid, or detailed estimate scenario. The research team used the Deseret Towers housing project at Brigham Young University as the basis for the research. A building information …

Development Of A Rigid Body Computational Model For Investigation Of Wrist Biomechanics, Benjamin Majors

Theses and Dissertations

The wrist is one of the most complex joints in the human body. As such, the wrist joint is difficult to model due to the number of bones involved and its intricate soft tissue interactions. Many studies have attempted modeling the wrist previously; however, the majority of these studies simplify the joint into two-dimensions or idealized mechanical joints to reduce the complexity of the simulation. While these approaches still yield valuable information, the omission of a third-dimension or geometry defined movements limits the models’ usefulness in predicting joint function under non-idealized conditions. Therefore, the goal of this study was to …

Joining Polycrystalline Cubic Boron Nitride And Tungsten Carbide By Partial Transient Liquid Phase Bonding, Grant O. Cook Iii

Theses and Dissertations

Friction stir welding (FSW) of steel is often performed with an insert made of polycrystalline cubic boron nitride (PCBN). Specifically, MS80 is a grade of PCBN made by Smith MegaDiamond that has been optimized for the FSW process. The PCBN insert is attached to a tungsten carbide (WC) shank by a compression fitting. However, FSW tools manufactured by this method inevitably fail by fracture in the PCBN. Permanently bonding PCBN to WC would likely solve the fracturing problem and increase the life of PCBN FSW tools to be economically viable. Partial transient liquid phase (PTLP) bonding, a process used to …

Eit, Slow Light, And Sealing Methods For Embedding Rubidium Into The Arrow System, Katherine Barnett Hurd

Theses and Dissertations

Light-matter interactions are fundamentally based on the quantum mechanical principles that govern photons, electrons and other fundamental particles. One very interesting phenomenon within all of light-matter interactions is Electromagnetically Induced Transparency(EIT). This phenomenon causes an otherwise absorbing atomic transition to stop absorbing through quantum mechanical interference of probability wave functions. Corresponding to that change in absorption, will be a sudden, large change in the index of refraction. This change in the index of refraction leads to another phenomenon in which the group velocity of light can be slowed down dramatically. In the past, many researchers have been able to achieve …

Modeling And Testing Of Dna Motion For Nanoinjection, Regis Agenor David

Theses and Dissertations

A new technique, called nanoinjection, is being developed to insert foreign DNA into a living cell. Such DNA transfection is commonly used to create transgenic organisms vital to the study of genetics, immunology, and many other biological sciences. In nanoinjection, DNA, which has a net negative charge, is electrically attracted to a micromachined lance. The lance then pierces the cell membranes, and the voltage on the lance is reversed, repelling the DNA into the cell. It is shown that DNA motion is strongly correlated to ion transport through a process called electrophoresis. Gel electrophoresis is used to move DNA using …

Hydraulic Conductivity Of Cement-Treated Soils And Aggregates After Freezing, Michael Scott Shea

Theses and Dissertations

Improvements in the strength and durability of frost-susceptible soils and aggregates can be achieved through chemical stabilization using portland cement, where the efficacy of cement stabilization for improving durability depends on the degree to which hydraulic conductivity is reduced. Hydraulic conductivity is commonly estimated from basic soil properties using Moulton's empirical equation. However, the hydraulic conductivity estimation does not consider the detrimental effects of freezing or the benefits of cement stabilization. The purpose of this research was to derive new equations relating hydraulic conductivity after freezing to specific material properties of cement-treated soils and aggregates stabilized with different concentrations of …

A Space Acquisition Leading Indicator Based On System Interoperation Maturity, Jason T. Shibata

Theses and Dissertations

The Department of Defense‘s space acquisition enterprise has experienced numerous challenges since the advent of space power. Space borne capabilities are needed more than ever, but space acquisition frequently fails to meet its goals. The decades of space acquisition experience form a rich history that can be used to build a leading indicator of success to enable effective program execution. First, the space acquisition areas of greatest concern were determined to be cost, schedule and requirements. These areas are considered as systems composed of the people, processes and products that execute the program. Second, the vital interoperation characteristics, or attributes …

Conceptual Design And Analysis Of Service Oriented Architecture (Soa) For Command And Control Of Space Assets, Eric B. Snyder

Theses and Dissertations

The mission-unique model that has dominated the DoD satellite Command and Control community is costly and inefficient. It requires repeatedly “reinventing” established common C2 components for each program, unnecessarily inflating budgets and delivery schedules. The effective utilization of standards is scarce, and proprietary, non-open solutions are commonplace. IT professionals have trumpeted Service Oriented Architectures (SOAs) as the solution to large enterprise situations where multiple, functionally redundant but non-compatible information systems create large recurring development, test, maintenance, and tech refresh costs. This thesis describes the current state of Service Oriented Architectures as related to satellite operations and presents a functional analysis …

Fatigue Behavior Of A Sic/Sic Composite At 1000⁰C In Air And In Steam, Michael W. Knauf

Theses and Dissertations

Tension-tension fatigue behavior of a prototype Silicon Carbide/Silicon Carbide (SiC/SiC) ceramic matrix composite (CMC) material was investigated at 1000°C in laboratory air and in steam environments. The material consists of a SiC matrix reinforced with CG NICALON™ fibers woven in an eight harness satin weave (8HSW) and coated with a BN/SiC dual-layer interphase. The composite was manufactured by a Polymer Infiltration and Pyrolysis (PIP) process. A seal coat of SiC and elemental boron was applied to the test specimens after machining. The tensile stress-strain behavior was investigated and the tensile properties were measured at 1000°C. Tension-tension fatigue behavior was studied …

Flow Control Application On A Submerged Inlet Characterized By Three-Component Ldv, Tina H. Reynolds

Theses and Dissertations

A submerged inlet investigation, using flow control in the form of discrete blowing, examined proximity and jet directionality to improve compressor face uniformity. The flow control locations were at the head of the ramp and part way down the ramp, providing four configurations under examination. Laser Doppler velocimetry (LDV)measurements at the throat determined the effect of the flow control based on the statistical velocity measurements. Blowing at closer proximity to the throat and targeting the largest velocity deficit region provided the best results. The airspeed and inlet velocity simulated takeoff and landing conditions; velocities ranged from Mach 0.1-0.3 at the …

Performance Characterization Of A Three-Axis Hall Effect Thruster, Spencer E. Temkin

Theses and Dissertations

No abstract provided.

Effects Of Prior Aging At 274⁰C In Argon On Inelastic Deformation Behavior Of Pmr-15 Polymer At 288⁰C: Experiment And Modeling, Joseph A. Wahlquist

Theses and Dissertations

No abstract provided.

Network Security Toolkit Including Heuristic Solutions For Trust System Placement And Network Obfuscation, Gabriel H. Greve

Theses and Dissertations

For Part I, a supervisory control and data acquisition (SCADA) network consists of a group stations and substations in a portion of the power grid. The use of Internet technology in SCADA communications as well as other factors has caused vulnerabilities. One idea to help mitigate this risk is to strategically place trust nodes to compartmentalize and secure the SCADA systems without disturbing its finely honed processes. The trust nodes combine firewall and intrusion detection technology to provide more secure communication. An optimal solution to this problem has already been developed using a mixed-integer linear programming model. Because the problem …

Navigation With Limited Prior Information Using Time Difference Of Arrival Measurements From Signals Of Opportunity, Christopher M. Rondeau

Theses and Dissertations

The Global Positioning System (GPS) provides world-wide availability to high-accuracy navigation and positioning information. However, the threats to GPS are increasing, and many limitations of GPS are being encountered. Simultaneously, systems previously considered as viable backups or supplements to GPS are being shut down. This creates the need for system alternatives. Navigation using signals of opportunity (SoOP) exploits any signal that is available in a given area, regardless of whether or not the original intent of the signal was for navigation. Common techniques to compute a position estimate using SoOP include received signal strength, angle of arrival, time of arrival, …

A Linear Combination Of Heuristics Approach To Spatial Sampling Hyperspectral Data For Target Tracking, Barry R. Secrest

Theses and Dissertations

Persistent surveillance of the battlespace results in better battlespace awareness which aids in obtaining air superiority, winning battles, and saving friendly lives. Although hyperspectral imagery (HSI) data has proven useful for discriminating targets, it presents many challenges as a useful tool in persistent surveillance. A new sensor under development has the potential of overcoming these challenges and transforming our persistent surveillance capability by providing HSI data for a limited number of pixels and grayscale video for the remainder. The challenge of exploiting this new sensor is determining where the HSI data in the sensor's field of view will be the …

4-D Modeling Of Displacement Vector Fields For Improved Radiation Therapy, Elizabeth Zachariah

Theses and Dissertations

In radiation therapy, it is imperative to deliver high doses of radiation to the tumor while reducing radiation to the healthy tissue. Respiratory motion is the most significant source of errors during treatment. Therefore, it is essential to accurately model respiratory motion for precise and effective radiation delivery. Many approaches exist to account for respiratory motion, such as controlled breath hold and respiratory gating, and they have been relatively successful. They still present many drawbacks. Thus, research has been expanded to tumor tracking. This paper presents a spatio-temporal model for four dimensional CT reconstruction. The method begins with a set …

Identifying Potential Applications For Lamina Emergent Mechanisms And Evaluating Their Suitability For Credit-Card-Sized Products, Nathan Bryce Albrechtsen

Theses and Dissertations

Lamina emergent mechanisms (LEMs) are a maturing technology that is prepared for commercial implementation into new products. LEMs are defined by three functional characteristics; they (1) are compliant, (2) are fabricated from planar materials, and (3) emerge from a flat initial state. Advantages, design challenges, and design tools are described for each of the functional characteristics. Opportunities for LEMs are discussed, namely disposable LEMs, novel arrays of LEMs, scaled LEMs, LEMs with surprising motion, shock absorbing LEMs, and deployable LEMs. Technology push product development processes were employed to select applications for LEMs. LEM technology was characterized. In a LEM workshop, …

Synthesis And Characterization Of Electrospun Gelatin/Dendrimer Scaffold Encapsulated With A Silver As A Potential Antimicrobial Wound Dressing, Alpana Dongargaonkar

Theses and Dissertations

A novel nanofiber scaffold was fabricated and characterized as a potential antimicrobial wound dressing. Half generation polyamidoamine (PAMAM) dendrimer G3.5 was covalently conjugated to gelatin. Gelatin alone or with gelatin-dendrimer conjugates was electrospun into nanofiber scaffolds. Gelatin is a derivative of natural collagen, and it is biocompatible, non-toxic and inexpensive, making it a desirable component in a wound dressing. Dendrimers are synthetic polymers comprising of a central core, internal branches and reactive surface groups. They provide a structurally controlled architecture for drug release. Silver was incorporated into the scaffold in situ due to its broad spectrum of antimicrobial properties. The …

Development Of Electroencephalography Based Brain Controlled Switch And Nerve Conduction Study Simulator Software, Kai Qian

Theses and Dissertations

This thesis investigated the development of an EEG-based brain controlled switch and the design of a software for nerve conduction study. For EEG-based brain controlled switch, we proposed a novel paradigm for an online brain-controlled switch based on Event-Related Synchronizations (ERDs) following external sync signals. Furthermore, the ERD feature was enhanced by 3 event-related moving averages and the performance was tested online. Subjects were instructed to perform an intended motor task following an external sync signal in order to turn on a virtual switch. Meanwhile, the beta-band (16-20Hz) relative ERD power (ERD in reverse value order) of a single EEG …