Engineering Commons^™

Cryogenic Carbon Capture Using A Desublimating Spray Tower, Bradley J. Nielson

Theses and Dissertations

Global warming is becoming ever increasing concern in our society. As such the likelihood of a carbon tax in the US is becoming increasingly likely. A carbon tax will be expensive enough that coal-based power plants will either have to install carbon capture technology or close. The two front runner technologies for carbon capture are amine scrubbing, and oxyfuel combustion. The downside is that both of these technologies increase power generation cost in a new plant by about 80% and have up to a 30% parasitic load, which reduces the cycle efficiency, that is, the power production per unit fuel …

Aqueous Henry's Law Constants, Infinite Dilution Activity Coefficients, And Water Solubility: Critically Evaluated Database, Experimental Analysis, And Prediction Methods, Sarah Ann Brockbank

Theses and Dissertations

A database containing Henry's law constants, infinite dilution activity coefficients and solubility data of industrially important chemicals in aqueous systems has been compiled. These properties are important in predicting the fate and transport of chemicals in the environment. The structure of this database is compatible with the existing DIPPR® 801 database and DIADEM interface, and the compounds included are a subset of the compounds found in the DIPPR® 801 database. Thermodynamic relationships, chemical family trends, and predicted values were carefully considered when designating recommended values. Henry's law constants and infinite dilution activity coefficients were measured for toluene, 1-butanol, anisole, 1,2-difluorobenzene, …

The Effect Of Carbon Additives On The Microstructure And Performance Of Alkaline Battery Cathodes, Douglas Robert Nevers

Theses and Dissertations

This thesis describes research to understand the relationships between materials, microstructure, transport processes, and battery performance for primary alkaline battery cathodes. Specifically, the effect of various carbon additives, with different physical properties, on electronic transport or conductivity within battery cathodes was investigated. Generally, the electronic conductivity increases with carbon additives that have higher aspect ratios, smaller particle diameters, higher surface areas, and lower bulk densities. Other favorable carbon aspects include more aggregated and elongated carbon domains which permit good particleto-particle contacts. Of the various carbon additives investigated, graphene nanopowder was the best performer. This graphene nanopowder had the smallest particle …

Dynamics And Control Of Wrist And Forearm Movements, Allan W. Peaden

Theses and Dissertations

Wrist and forearm motion is governed both by its dynamics and the control strategies employed by the neuromuscular system to execute goal oriented movement. Two experiments were conducted to increase our understanding of wrist and forearm motion. The first experiment involved 10 healthy subjects executing planned movements to targets involving all three degrees of freedom (DOF) of the wrist and forearm, namely wrist flexion-extension (FE), wrist radial-ulnar deviation, and forearm pronation-supination (PS). A model of wrist and forearm dynamics was developed, and the recorded movements were fed into the model to analyze the movement torques. This resulted in the following …

A Study Of Action Origami As Systems Of Spherical Mechanisms, Landen A. Bowen

Theses and Dissertations

Origami, the Japanese art of paper folding, has been used previously to inspire engineering solutions for compact, deployable designs. Action origami, the subset of origami dealing with models designed to move, is a previously unexplored area for engineering design solutions that are deployable and have additional motion in the deployed state. A literature review of origami in engineering is performed, resulting in seven key areas of technical origami literature from a wide variety of disciplines. Spherical mechanisms are identified as the method by which most action origami models achieve complicated motion while remaining flat-foldable. The subset of action origami whose …

Capillary Filling Of Large Aspect Ratio Channels With Varying Wall Spacing, Dallin B. Murray

Theses and Dissertations

Quantification and prediction of capillary fluid flow in planar nanochannels is essential to the development of many emerging nanofluidic technologies. Planar nanochannels are typically produced using the standard nanofabrication processes of thermal bonding or sacrificial etching. Both approaches may yield nanochannels that are bowed and/or exhibit non-uniform (i.e. non-planar) wall spacing. These variations in wall spacing affect the transient dynamics of a liquid plug filling the nanochannel, causing deviations from the classical behavior in a parallel-plate channel as described by the Washburn model. Non uniform wall spacing impacts the overall frictional resistance and influences the meniscus curvature. In this thesis, …

Development Of Mobile Ad-Hoc Network For Collaborative Unmanned Aerial Vehicles, Siva Teja Patibandla

Theses and Dissertations

The purpose of this research was to develop a mobile ad-hoc network for collaborative Unmanned Aerial Vehicles (UAVs) based on a mesh networking standard called IEEE 802.11s. A low-cost, small form-factor, IEEE 802.11a based wireless modem was selected and integrated with the existing flight control system developed at Virginia Commonwealth University (VCU) UAV Laboratory. A self-configurable user-space application on the wireless modem was developed to provide functionality to collaborative algorithms, and to monitor the performance of the wireless network. The RAMS simulator, developed at VCU, was upgraded to support the simulation of advanced networking capabilities by integrating with a simulator …

Experiments With Gmti Radar Using Micro-Doppler, Benjamin Walter Dilsaver

Theses and Dissertations

As objects move, their changing shape produces a signature that can be measured by a radar system. That signature is called the micro-Doppler signature. The micro-Doppler signature of an object is a distinguishing characteristic for certain classes of objects. In this thesis features are extracted from the micro-Doppler signature and are used to classify objects. The scope of the objects is limited to humans walking and traveling vehicles. The micro-Doppler features are able to distinguish the two classes of objects. With a sufficient amount of training data, the micro-Doppler features may be used with learning algorithms to predict unknown objects …

Compositional And Structural Properties Of Emulsion-Treated Base Material: 7800 South In West Jordan, Utah, Lisa Renay Gurney

Theses and Dissertations

The objectives of this research were 1) to examine correlations between compositional and structural properties of emulsion-treated base (ETB) layers, determine which of these factors exhibit the greatest spatial variability, and determine if significant differences exist between different test sections on a given project and 2) to investigate temporal trends in the structural properties of base materials treated with asphalt emulsion and to assess the rate at which ETB design properties are achieved. The research conducted in this study focused on testing of the ETB layer constructed on 7800 South (SR-48) in West Jordan, Utah. The research conducted in this …

Evaluating The Effects Of Non-Anonymity On Student Team-Member Evaluations, Taylor Robert Smith

Theses and Dissertations

This thesis investigates the effect that non-anonymity has upon student team-member evaluations; more specifically, it looked at how to create conditions of openness and honesty in which students will readily give and receive constructive criticism. The central hypothesis of this research is that if students are taught and prepared to properly give and receive constructive criticism, and have multiple opportunities to do so, non-anonymous feedback is the most effective and desirable. In order to gauge the effects of non-anonymity, eight specific hypotheses relating to different aspects of the feedback process were tested. Predictions were made as to the effects upon …

Comparison Of Performance-Based Liquefaction Initiation Analyses Between Multiple Probabilistic Liquefaction Models Using The Standard Penetration Test, Alexander David Wright

Theses and Dissertations

For the most recent and correct article, please click here: http://ascelibrary.org/doi/abs/10.1061/9780784412787.086

This study examines the use of performance-based approaches in liquefaction hazard analysis. Two new methods of performance-based liquefaction initiation analysis are proposed which use the works of Juang et al. (2012) and Boulanger and Idriss (2012). Further advances are made by incorporating the performance-based magnitude scaling factors as proposed by Cetin et al. (2012). Using these new equations a comparative study is made between the three methods. Further comparisons are made between the performance-based approaches and the more widely used deterministic approaches. The comparisons reveal that on average for …

An Alternative System Identification Method For Friction Stir Processing, Dustin John Marshall

Theses and Dissertations

Temperature control has been implemented in friction stir processing and has demonstrated the ability to give improved process control. In order to have optimal control of the process, the parameters of the system to be controlled must be accurately identified. The system parameters change with tool geometry and materials, workpiece materials, and temperature. This thesis presents the use of the relay feedback test to determine the system parameters. The relay feedback test is easy to use and promotes system stability during its use. The results from the relay feedback test can be used to determine controller gains for a PID …

Backprojection For Synthetic Aperture Radar, Michael Israel Duersch

Theses and Dissertations

Synthetic aperture radar (SAR) is a type of radar capable of high-resolution coherent imaging. In order to produce coherent imagery from raw SAR data, an image formation algorithm is employed. The various image formation algorithms have strengths and weaknesses. As this work shows, time-domain backprojection is one algorithm whose strengths are particularly well-suited to use at low-altitudes. This work presents novel research in three areas regarding time-domain backprojection. The first key contribution of this work is a detailed analysis of SAR time-domain backprojection. The work derives a general form of backprojection from first principles. It characterizes the sensitivities of backprojection …

Subthreshold Op Amp Design Based On The Conventional Cascode Stage, Kurtis Daniel Cahill

Theses and Dissertations

Op amps are among the most-used components in electronic design. Their performance is important and is often measured in terms of gain, bandwidth, power consumption, and chip area. Although BJT amplifiers can achieve high gains and bandwidths, they tend to consume a lot of power. CMOS amplifiers utilizing the strong inversion region alone use less power than BJT amplifiers, but generally have lower gains and bandwidths. When CMOS SPICE models were improved to accurately simulate all regions of inversion, researchers began to test the performance of amplifiers operating in the weak and moderate inversion regions. Previous work had dealt with …

Design Of A Lighter Than Air Vehicle That Achieves Positive Buoyancy In Air Using A Vacuum, Trent T. Metlen

Theses and Dissertations

Three designs for a Lighter Than Air (LTA) structure that achieve positive buoyancy using a vacuum in place of a lifting gas were proposed and evaluated. The ratio of structure weight to the weight of displaced air was termed Weight/Buoyant Force (W/B) where a W/B1 corresponds to positive buoyancy. Two methods of geometrically stiffening a sphere were investigated and their W/B evaluated. A thin shelled sphere of beryllium stiffened with an isogrid of blade type stiffeners using Ultra High Modulus (UHM) carbon epoxy was predicted to give a W/B= 0.79. A geodesic sphere composed of a frame of cylindrical, UHM, …

Classification Of Encrypted Web Traffic Using Machine Learning Algorithms, William C. Barto

Theses and Dissertations

The increasing usage of web services and encrypted network communication makes the network analysis of encrypted web traffic of utmost importance. This research evaluates the feasibility of using ML algorithms to classify web services within encrypted TLS flows. The ML algorithms are compared primarily based on classification accuracy. The runtimes of the classifiers are also considered, as classifiers must be able determine labels quickly in order to be used in near realtime network protection devices. Five ML algorithms are initially considered when analyzing only the first 12 packets: Naive Bayes, NBTree, LibSVM, J4.8, and AdaBoost+J4.8. AdaBoost+J4.8 and J4.8 produce the …

Applied Hypergame Theory For Network Defense, Alan S. Gibson

Theses and Dissertations

Cyber operations are the most important aspect of military conflicts in the 21st century, but unfortunately they are also among the least understood. The continual battle for network dominance between attackers and defenders is considered to be a complex game. Hypergame theory is an extension of game theory that addresses the kind of games where misperception exists, as is often the case in military engagements. Hypergame theory, like game theory, uses a game model to determine strategy selection, but goes beyond game theory by examining subgames that exist within the full game. The inclusion of misperception and misinformation in the …

Side-Channel Analysis Of Subscriber Identity Modules, John A. Hearle

Theses and Dissertations

Subscriber identity modules (SIMs) contain useful forensic data but are often locked with a PIN code that restricts access to this data. If an invalid PIN is entered several times, the card locks and may even destroy its stored data. This presents a challenge to the retrieval of data from the SIM when the PIN is unknown. The field of side-channel analysis (SCA) collects, identifies, and processes information leaked via inadvertent channels. One promising side-channel leakage is that of electromagnetic (EM) emanations; by monitoring the SIM's emissions, it may be possible to determine the correct PIN to unlock the card. …

Dynamic Network Topologies, Heather A. Lingg

Theses and Dissertations

Demand for effective network defense capabilities continues to increase as cyber attacks occur more and more frequently and gain more and more prominence in the media. Current security practices stop after data encryption and network address filtering. Security at the lowest level of network infrastructure allows for greater control of how the network traffic flows around the network. This research details two methods for extending security practices to the physical layer of a network by modifying the network infrastructure. The first method adapts the Advanced Encryption Standard while the second method uses a Steiner tree. After the network connections are …

Improving Multiple Surface Range Estimation Of A 3-Dimensional Flash Ladar In The Presence Of Atmospheric Turbulence, Brian J. Neff

Theses and Dissertations

Laser Radar sensors can be designed to provide two-dimensional and three-dimensional (3-D) images of a scene from a single laser pulse. Currently, there are various data recording and presentation techniques being developed for 3-D sensors. While the technology is still being proven, many applications are being explored and suggested. As technological advancements are coupled with enhanced signal processing algorithms, it is possible that this technology will present exciting new military capabilities for sensor users. The goal of this work is to develop an algorithm to enhance the utility of 3-D Laser Radar sensors through accurate ranging to multiple surfaces per …

Evaluation Of Cyber Sensors For Enhancing Situational Awareness In The Ics Environment, Jeremy R. Otis

Theses and Dissertations

Industrial Control Systems (ICS) monitor and control operations associated with the national critical infrastructure (e.g., electric power grid, oil and gas pipelines and water treatment facilities). These systems rely on technologies and architectures that were designed for system reliability and availability. Security associated with ICS was never an inherent concern, primarily due to the protections afforded by network isolation. However, a trend in ICS operations is to migrate to commercial networks via TCP/IP in order to leverage commodity benefits and cost savings. As a result, system vulnerabilities are now exposed to the online community. Indeed, recent research has demonstrated that …

Kernel Extended Real-Valued Negative Selection Algorithm (Kernsa), Brett A . Smith

Theses and Dissertations

Artificial Immune Systems (AISs) are a type of statistical Machine Learning (ML) algorithm based on the Biological Immune System (BIS) applied to classification problems. Inspired by increased performance in other ML algorithms when combined with kernel methods, this research explores using kernel methods as the distance measure for a specific AIS algorithm, the Real-valued Negative Selection Algorithm (RNSA). This research also demonstrates that the hard binary decision from the traditional RNSA can be relaxed to a continuous output, while maintaining the ability to map back to the original RNSA decision boundary if necessary. Continuous output is used in this research …

The Design And Analysis Of Electrically Large Custom-Shaped Reflector Antennas, Joshua M. Wilson

Theses and Dissertations

Designing and analyzing electrically large reflectors poses numerically complex problems because the reflector must be sampled finely to obtain an accurate solution, causing an unwieldy number of samples. In addition to these complexities, a custom-shaped reflector poses a new analysis problem. Previously developed methods and theorems including Geometric Optics, Ray-Tracing, Surface Equivalence Theorems, Image Theory, and Physical Optics can be applied to these custom-shaped reflectors however. These methods all share in common their capability to provide accurate results in the analysis of electrically large structures. In this thesis, two custom-shaped reflector concepts are explored which include a rectangular shaped, spherically …

Space Debris Mitigation Conops Development, Earl B. Alejandro

Theses and Dissertations

Space debris remains an unsolved hazard for space operators and astronomers alike. Passive debris mitigation techniques have been enumerated and codified by the UNCOPUOS and IADC and several proposals for actively mitigating space debris have been presented. However, the space debris problem requires reframing. On the way to developing a viable CONOPS, a multi-disciplinary construct for building solution sets to tackle the space debris problem must be created. It must be shaped by building blocks of active and passive debris mitigation techniques, debris characterization and law. Central considerations must be taken. First, targeting of space debris for removal must be …

Crack Initiation And Growth Behavior At Corrosion Pit In 7075-T6 High Strength Aluminum Alloy, Eric M. Hunt

Theses and Dissertations

Research on fatigue crack formation from two types corrosion pits tangent to a circular hole in a 7075-T6 aluminum alloy subjected to uni-axial loads (R = 0.5, lambda = 0) in both an air and saltwater environment provides a method for exploring crack initiation and initial growth rates. This work focuses on a fracture mechanics approach to explore the transition from corrosion pit to crack growth. Specimens with a cylinder shaped through-pit tangent to a circular hole have a closed form solution to predict this delta K that closely resembles the finite element solutions. Specimens with a semi-circular corner-pit tangent …

Performance And Reliability Study And Exploration Of Nand Flash-Based Solid State Drives, Guanying Wu

Theses and Dissertations

The research that stems from my doctoral dissertation focuses on addressing essential challenges in developing techniques that utilize solid-state memory technologies (with emphasis on NAND flash memory) from device, circuit, architecture, and system perspectives in order to exploit their true potential for improving I/O performance in high-performance computing systems. These challenges include not only the performance quirks arising from the physical nature of NAND flash memory, e.g., the inability to modify data in-place, read/write performance asymmetry, and slow and constrained erase functionality, but also the reliability drawbacks that limits solid state drives (SSDs) from widely deployed. To address these challenges, …

Application Of One Dimensional Turbulence (Odt) To Model Fire Spread Through Biomass Fuel Bed, Abinash Paudel

Theses and Dissertations

Each year fires destroy millions of acres of woodland, lives, and property, and significantly contribute to air pollution. Increased knowledge of the physics and properties of the flame propagation is necessary to broaden the fundamental understanding and modeling capabilities of fires. Modeling flame propagation in fires is challenging because of the various modes of heat transfer with diverse fuels, multi-scale turbulence, and complex chemical kinetics. Standard physical models of turbulence like RANS and LES have been used to understand the flame behavior, but these models are limited by computational cost and their inability to resolve sub-grid scales. Application of several …

Accuracy Of A Simplified Analysis Model For Modern Skyscrapers, Jacob Scott Lee

Theses and Dissertations

A new simplified skyscraper analysis model (SSAM) was developed and implemented in a spreadsheet to be used for preliminary skyscraper design and teaching purposes. The SSAM predicts linear and nonlinear response to gravity, wind, and seismic loading of "modern" skyscrapers which involve a core, megacolumns, outrigger trusses, belt trusses, and diagonals. The SSAM may be classified as a discrete method that constructs a reduced system stiffness matrix involving selected degrees of freedom (DOF's). The steps in the SSAM consist of: 1) determination of megacolumn areas, 2) construction of stiffness matrix, 3) calculation of lateral forces and displacements, and 4) calculation …

The Effects Of Mismatches And Probe Tethering Configurations On The Stability Of Dna Duplexes On Surfaces, Kyle Evan Pratt

Theses and Dissertations

DNA microarrays are chip-based, analysis tools which can perform hundreds of thousands of parallel assays to determine the identity of genes or gene expression levels present in a sample. They have been identified as a key technology in genomic sciences and emergent medical techniques; however, despite their abundant use in research laboratories, microarrays have not been used in the clinical setting to the fullest potential due to the difficulty of obtaining reproducible results. Microarrays work on the principle of DNA hybridization, and can only be as accurate as this process is robust. Fundamental, molecular-level understanding of hybridization on surfaces is …

Poly(N-Isopropylacrylamide)-Based Scaffolds For Tissue Engineering Applications, Pamela Kubinski

Theses and Dissertations

The primary goal of this work is to investigate the potential of poly(Nisopropylacrylamide)- based scaffolds in tissue engineering applications, specifically spinal injury and nucleus pulposus replacement. Poly(N-isopropylacrylamide), denoted PNIPAAm, is a synthetic polymer with hydrophilic properties at room temperature, but above 32C the chains become hydrophobic and entangle to form physical crosslinks. This thermoresponsive property enables PNIPAAm to be implanted as a free-flowing solution at room temperature and collapse into a gel in physiological conditions. However, as a homopolymer, the hydrophobicity of PNIPAAm in vivo causes the hydrogel to expel water and exhibit inelastic properties that do not mimic those …