Engineering Commons^™

Structurally Integrated Reconfigurable Wideband Array For Conformal Applications, Michael Damon Wright

Theses and Dissertations

Structurally integrated conformal antennas offer significant advantages over traditional bolt on antennas, especially for air vehicle applications. The ability to leverage the entire structure allows for unconventionally large antennas and arrays to be implemented in a manner which does not detract from the aerodynamic, structural or aesthetic qualities of the vehicle. Works along this line have included Slotted Waveguide Antenna Stiffened Structures (SWASS), conformal helix and spiral antennas, Log Periodic Dipole Arrays (LPDA), and other antennas.

An area which has not been investigated to date is the possibility of implementing reconfigurable antennas in a structural environment. There are inherent challenges …

Modulation Of Amyloid-Β Aggregation Via Small Molecules And Glycine Zipper Alterations, Steven Zebulon Vance

Theses and Dissertations

Alzheimer’s disease (AD) is the most common form of neurodegenerative disease. Nationally, AD is the 6th leading cause of death and the only top 10 killer of Americans that cannot be slowed, cured, or prevented. AD is characterized by the deposition of extracellular plaques of aggregated amyloid-β protein (Aβ). Aβ originates from the amyloid precursor protein (APP), a transmembrane protein that is cleaved to form a short and inert protein fragment called Aβ. However, Aβ undergoes a nucleation process wherein aggregates from soluble oligomers to insoluble fibrils are formed. While uncertainty remains as to the exact mechanism, studies have associated …

Evaluation Of Sonocatalytic Degradation Of Ibuprofen And Sulfamethoxazole In The Presence Of Various Catalysts, Yasir Alhamadani

Theses and Dissertations

Over the last two decades, large quantities of products, such as medicines, disinfectants, and personal care products, have been released into surface waters and wastewater treatment facilities by the pharmaceutical and chemical industries which have come to the attention of scientists with regard to their impacts on life in lakes, rivers, and groundwater. Among various types of treatment processes, ultrasonic (US) treatment process was used in this study to investigate the effect catalysts and removal of selected pharmaceutical’s (PhACs) compounds (ibuprofen (IBP) and sulfamethoxazole (SMX)). Carbon nanomaterials (CNMs) have become candidates for numerous applications in nanocomposites, microelectric devices, sensors, energy …

Enhance Flow Boiling In Microchannels By Regulating Two-Phase Transport Patterns, Wenming Li

Theses and Dissertations

Flow boiling in microchannels is one of the most promising cooling techniques for microelectronics. Using latent heat by vaporization can significantly improve heat dissipation of high power density electronic devices. Most of the failure of electronic devices is induced by the occurrence of critical heat flux (CHF), which defines the maximum operating conditions. However, the vigorous rapid generation of vapor through phase change leads to chaotic two-phase flows in microchannels, resulting in flowinstability in terms of severe flow, temperature and pressure drop fluctuations. Particularly, the very well-known bubble confinement exacerbates the two-phase flow instabilities and greatly deteriorates heat transfer performance …

Efficient Design Optimization Methodology For Nonconventional Laminated Thin-Walled Composite Structures, Mazen Albazzan

Theses and Dissertations

Structural designers seek the best possible design of a structure that optimally meets the requirements of a specific application. The measure of the quality of the final design can often be related to specific stiffness and strength of the structure. Because of their superior mechanical and environmental properties compared to traditional metals, fiberreinforced composite materials have earned a widespread acceptance for different structural applications. The tailoring potential of composites to achieve high specific stiffness and strength has promoted them as promising candidates for constructing lightweight structures. From that aspect, designers have tackled the problem of designing composite laminates, which is …

Multiscale Deformation And Failure Behavior Of Polymer Bonded Explosives Subjected To High Rate Loading, Suraj Muthiramalil Ravindran

Theses and Dissertations

Polymer bonded explosives (PBX) are heterogeneous granular composites with a high-volume fraction of solid. Typically, they contain 80-95% explosive crystals and 5- 20% soft polymer binder. These materials are subjected to different loading conditions during their service life. The main function of the soft binder is to reduce shock sensitivity to prevent an accidental explosion. However, there have been inadvertent detonations in these materials during transportation and handling. The reason for such unintentional explosion is not well understood. It is commonly accepted that the formation of local hightemperature regions, called ‘hot spots’, is the primary cause. Hotspot formation is associated …

Changes Of Dispersal Ability In An Isolated Population, Connor Bacon

Theses and Dissertations

Dispersal is a core mechanism in the maintenance of metapopulations. It maintains genetic diversity by connecting subpopulations and generates new populations to replace those that die out. However, as populations become more isolated, as occurs in habitat fragmentation, dispersal becomes more difficult. This should lead to selective pressure against dispersive individuals, causing a reduction in dispersal traits. Over time, this can lead to variation in dispersal traits among populations. We examine this idea using an extreme case of isolation in Euphydryas gillettii, a population that has remained completely isolated for forty years. By comparing this population to a baseline established …

Physics-Based Approaches For Structural Health Monitoring And Nondestructive Evaluation With Ultrasonic Guided Waves, Md Yeasin Bhuiyan

Theses and Dissertations

The engineering infrastructures have a growing demand for damage monitoring systems to avoid any potential risk of failure. Proper damage monitoring solutions are of a great interest to this growing demand. The structural health monitoring (SHM) and nondestructive evaluation (NDE) offer appropriate online and offline damage monitoring solutions for a variety of mechanical and civil infrastructures that includes unmanned aerial vehicles (UAV), spaceships, commercial aircraft, ground transportation, wind turbines, nuclear spent fuel storage tanks, bridges, naval ships, and submarines. The fundamentals of the ultrasonic SHM and NDE consist of multi-disciplinary fields. The dissertation addresses SHM and NDE using ultrasonic guided …

Fundamentals Of Srcoo3 Based Oxygen-Deficient Perovskites As Cathodes For Solid Oxide Fuel Cells, Tianrang Yang

Theses and Dissertations

The local structure and oxygen stoichiometry in oxide systems have a profound impact on oxygen electrocatalysis encountered in metal-air batteries and solid oxide fuel cells (SOFCs). However, this knowledge is often obtained under conditions different from the real working conditions of the material, resulting in misinterpretation and misunderstanding. This PhD dissertation aims to obtain the structure and oxygen stoichiometry information of a class of perovskite oxides under their real working conditions in solid oxide fuel cells. Several perovskite oxides were selected for the study: Sr0.9Y0.1CoO3- (SYC10), Sr0.9Y0.3CoO3- (SYC30), SrCo0.9Nb0.1O3- (SCN10) and SrCo0.9Ta0.1O3- (SCT10). The local crystal structure and oxygen stoichiometry …

Manufacturing Feature Recognition With 2d Convolutional Neural Networks, Yang Shi

Theses and Dissertations

Feature recognition is a critical sub-discipline of CAD/CAM that focuses on the design and implementation of algorithms for automated identification of manufacturing features. The development of feature recognition methods has been active for more than two decades for academic research. However, in this domain, there are still many drawbacks that hinder its practical applications, such as lack of robustness, inability to learn, limited domain of features, and computational complexity. The most critical one is the difficulty of recognizing interacting features, which arises from the fact that feature interactions change the boundaries that are indispensable for characterizing a feature. This research …

Design, Synthesis, And Characterization Of Monometallic And Bimetallic Catalysts, Sonia Eskandari

Theses and Dissertations

Supported catalysts are used extensively in a variety of heterogeneously catalyzed reactions for industrial processes. Techniques for preparing supported noble metal catalysts are typically chosen to achieve high metal dispersions in order to obtain high activity for a given metal loading. Enhancing the catalytic performance of heterogeneous catalysts can be done by increasing active site count as well as modification of the physico-chemical characteristics of the catalyst material. For supported metal nanoparticles this can be achieved by decreasing particle size, thus increasing dispersion or metal utilization on the surface of the particles, while modification of metal properties can be attained …

The Mechanical Properties And Deformation Behavior Of Heat Treated Versus As-Received Inconel X-750, Christopher Marsh

Theses and Dissertations

X-750 is a nickel-chromium based super alloy of usefulness in a wide variety of applications such as gas turbines, rocket engines, nuclear reactors, pressure vessels, tooling, and aircraft structures. Its good mechanical properties are due to the strengthening from precipitation of γ′ particles upon prior ageing heat treatment. In this work, the effect of such heat treatment on the mechanical properties, tensile behavior, and fracture mechanisms of X-750 was studied at various temperatures by comparing it with a non-aged, solution annealed X-750. Tensile tests were conducted from room temperatures up to 900 °C at three separate strain rates (10-3, 10-4, …

Association Between Mechanics And Biology In Vascular Graft Remodeling, David Andrew Prim

Theses and Dissertations

Coronary artery bypass grafting (CABG) restores myocardial perfusion in patients with severe coronary artery disease by utilizing autografts – usually at least one of the internal thoracic artery (ITA), radial artery (RA), and great saphenous vein (GSV) – to bypass stenosed regions of coronary arteries. While decades of research and clinical improvements have made CABG an indispensable procedure, tens of thousands of grafts fail each year, which is due, at least in part, to an inability of the source vessels to adapt to the altered stimuli of the coronary circulation. In this dissertation, we first quantify and compare the mechanical …

Complete Measurement System For Measuring High Voltage And Electrical Field Using Slab-Coupled Optical Fiber Sensors, Nikola Stan

Theses and Dissertations

A slab-coupled optical fiber sensor (SCOS) falls into a narrow class of all-dielectric optical fiber electric field sensors, which makes it a perfect candidate for measurements of high electric fields in environments where presence of conductors is highly perturbing to the system under test. Its nonlinear response to high fields requires a new nonlinear calibration technique. A nonlinear calibration method is explained and demonstrated to successfully measure high electric fields, as well as high voltages with dynamic range up to 50 dB. Furthermore, a SCOS can be fitted into narrow spaces and make highly localized measurements due to its small …

Fibronectin Mechanics And Signaling In Tgf-Β1-Induced Epithelial To Mesenchymal Transition, Lauren Griggs

Theses and Dissertations

Epithelial to Mesenchymal Transition (EMT) is a dynamic process by which a distinct change in the phenotype and function of epithelial cells render them as mesenchymal cells. Characteristics of mesenchymal cells include the ability to invade, increased migratory kinetics and heightened resistance to apoptosis. Therefore, there is a strong need to fully understand the mechanism for the induction of EMT in pathological conditions such as carcinoma progression. Recent advances highlight two pivotal contributors, soluble growth factor (gf) signals, and mechanical signals, in the process. However, to date, no clear mechanism exists linking the two in epithelial transdifferentiation. Transforming Growth Factor-β1 …

Reducing Uncertainty In Head And Neck Radiotherapy With Plastic Robotics, Mark R. Ostyn

Theses and Dissertations

One of the greatest challenges in achieving accurate positioning in head and neck radiotherapy is that the anatomy at and above the cervical spine does not act as a single, mechanically rigid body. Current immobilization techniques contain residual uncertainties that are especially present in the lower neck that cannot be reduced by setting up to any single landmark. The work presented describes the development of a radiotherapy friendly mostly-plastic 6D robotic platform for positioning independent landmarks, (i.e., allowing remote, independent positioning of the skull relative to landmarks in the thorax), including analysis of kinematics, stress, radiographic compatibility, trajectory planning, physical …

Efficient Information Dissemination In Vehicular Networks With Privacy Protection, Xiaolu Cheng

Theses and Dissertations

Vehicular ad hoc network (VANET) is a key component of intelligent transportation System (ITS). In VANETs, vehicles and roadside units exchange information for the purpose of navigation, safe driving, entertainment and so on. The high mobility of vehicles makes efficient and private communications in VANETs a big challenge.

Improving the performance of information dissemination while protecting data privacy is studied in this research. Meet-Table based information dissemination method is first proposed, so as to improve the information dissemination, and to efficiently distribute information via utilizing roadside units, Cloud Computing, and Fog Computing. A clustering algorithm is proposed as well, to …

Integral Measurement Of Atmospheric Particulate Matter (Pm), Di Liu

Theses and Dissertations

Atmospheric aerosol particles also known as atmospheric particulate matter or particulate matter (PM) are microscopic particles (solid or liquid) suspended in air, which is one of six air pollutants in US air quality standard. PM is classified as coarse particles with diameters between 2.5 to 10 mm, fine particles with a diameter less than 2.5 mm (PM_2.5), and ultrafine particles with the diameter less than 0.1 mm (PM_0.1). Epidemiological studies have already showed the adverse health effects (such as asthma, lung cancer and respiratory and cardiovascular disease) resulted from exposure to the fine and ultrafine particles. …

Hydrophobicity Of Low Temperature Vibrating Surfaces, Christian Fergusson

Theses and Dissertations

This study proposes a method to enhance the anti-icing capabilities of superhydrophobic surfaces by utilizing vibration to further reduce contact time of an impacting droplet in addition to keeping the droplet in the Cassie-Baxter regime, where surface adhesion is lower than the opposing Wenzel regime. We tested this with two methods: by investigating the effects of vibration normal to the plane of a superhydrophobic surface being impacted by water droplets in a room temperature environment, with the surface horizontal in a room temperature environment and tiled in a subzero degree environment. The amplitude and frequency of the vibration were varied …

Lanthanide-Based Core-Shell Nanoparticles As Multifunctional Platforms For Targeted Radionuclide Therapy And Multimodal Molecular Imaging, Miguel Toro-Gonzalez

Theses and Dissertations

Lanthanide phosphate (LnPO₄) and lanthanide vanadate (LnVO₄) nanoparticles (NPs) are promising platforms for theranostic applications because of their chemical stability, low solubility, low toxicity, and unique luminescence and magnetic properties. Motivated by the high radiation resistance and ability to host actinides of naturally occurring lanthanide-based compounds, LnPO₄ and LnVO₄ NPs were studied as radionuclide carriers for targeted radionuclide therapy using in vivoα-generators, ²²³Ra, ²²⁵Ac, and ²²⁷Th. The implementation of these radionuclides has shown potential for the treatment of micrometastases and solid tumors as well as challenges in the retention of …

Improving Performance And Energy Efficiency For The Integrated Cpu-Gpu Heterogeneous Systems, Hao Wen

Theses and Dissertations

Current heterogeneous CPU-GPU architectures integrate general purpose CPUs and highly thread-level parallelized GPUs (Graphic Processing Units) in the same die. This dissertation focuses on improving the energy efficiency and performance for the heterogeneous CPU-GPU system.

Leakage energy has become an increasingly large fraction of total energy consumption, making it important to reduce leakage energy for improving the overall energy efficiency. Cache occupies a large on-chip area, which are good targets for leakage energy reduction. For the CPU cache, we study how to reduce the cache leakage energy efficiently in a hybrid SPM (Scratch-Pad Memory) and cache architecture. For the GPU …

Neutronics Studies On The Nist Reactor Using The Ga Leu Fuel, Kyle A. Britton

Theses and Dissertations

The National Bureau of Standards Reactor (NBSR) located on the National Institute of Standards and Technology (NIST) Gaithersburg campus, is currently underway of fuel conversion from high enriched uranium (HEU) fuel to low enriched uranium (LEU) fuel. One particular challenging part of the conversion of the NBSR is the high average flux level (2.5×10¹⁴ n/cm²-s) required to maintain experimental testing capabilities of the reactor, without significant changes to the external structures of the reactor. Recently the General Atomics (GA) Training Research Isotopes General Atomics (TRIGA) fuel has shown some promising features as a LEU candidate for the …

Toxicological Inhalation Effects Of Metal-Based Nanoparticle Aerosols As Studied By A Portable In Vitro Exposure Cassette, Lynn E. Secondo

Theses and Dissertations

The toxicology of aerosols in occupational settings is often performed through particle collection on a filter followed by reconstitution into cell culture media which can alter the biological effects. Current in vitro exposure systems require additional instruments to control temperature and humidity, making the system bulky and difficult to take to the field. The Portable In Vitro Exposure Cassette (PIVEC) was designed for personal monitoring, characterized using copper nanoparticles, tested with alveolar cells, and set-up for real-time monitoring. Three differently sized copper nanoparticles, 40-800 nm, were dispersed as a dry aerosol and measured gravimetrically and on a number concentration basis …

Improving The Performance And Energy Efficiency Of Emerging Memory Systems, Yuhua Guo

Theses and Dissertations

Modern main memory is primarily built using dynamic random access memory (DRAM) chips. As DRAM chip scales to higher density, there are mainly three problems that impede DRAM scalability and performance improvement. First, DRAM refresh overhead grows from negligible to severe, which limits DRAM scalability and causes performance degradation. Second, although memory capacity has increased dramatically in past decade, memory bandwidth has not kept pace with CPU performance scaling, which has led to the memory wall problem. Third, DRAM dissipates considerable power and has been reported to account for as much as 40% of the total system energy and this …

Process Optimization For The Synthesis Of Gold Nanoparticles From A Mixed Metal Precursor Solution, Kathryn Ann Dill

Theses and Dissertations

Separation methods involving a mixture of metals typically include upfront processing that leads to one final product. To lower the waste and ultimately environmental burden, the potential to synthesize multiple functional products from a mixed metal precursor solution is explored. The initial precursor solutions contained varying ratios of gold and copper, gold and nickel, and finally a ternary solution of gold, copper, and nickel. The amount of gold was kept constant, while the amount of copper and/or nickel was sequentially increased. Two separate synthesis processes were tested, the traditional Turkevich method involving trisodium citrate and another chemical reduction method involving …

Experimental Evaluation Of Uranyl Transport Into Mesoporous Silica Gel Using Fluorescence, Brandon M. Dodd

Theses and Dissertations

This research investigated parameters that can affect the use of nanoporous silica gel as a media for accumulating a detectable amount of uranium. The unique fluorescence of the Uranyl (UO₂²⁺) ion was used to evaluate the transport kinetics and accumulation within silica gel in a static fluid and under pressure driven flow. The addition of fluid flow decreased the time constant from on the order of an hour to approximately 2s with a very low fluid velocity of 0.36cm/s. The 0.36cm/s fluid velocity was found to be the critical velocity above which there was no gain in …

Metabolic Engineering Of Serratia Marcescens, Qiang Yan

Theses and Dissertations

The potential value of the chitin biomass (e.g. food waste) is recently considered being ignored by landfill. Chitin can be a potential cheap carbon source for converting into value-added chemicals by microorganisms. Serratia marcescens is a chitinolytic bacterium that harbors endogenous chitinase systems. With goals of characterzing S. marcescens chitinolytic capabilities and applying S. marcescens to chemical production from chitin, my dissertation main content includes five chapters: 1) Chapter 1 highlights background information of chitin source, S. marcescens and potential metabolic engineering targets using chitin as a substrate; 2) Chapter 2 demonstrates that ChiR is a key regulator in regulating …

Modeling Fluid Motion Over Fibrous Surfaces, Delli Ganesh Venkateshan

Theses and Dissertations

The ultimate goal of this project has been to develop a computational model for quantifying the interactions between of a body of fluid and a fibrous surface. To achieve this goal, one has to develop a model to create virtual structures that resemble the morphology of a fibrous surface (Objective-1) as well as a model that can simulate the flow of a fluid over these virtual surfaces (Objective-2). To achieve the first objective, we treated fibers as an array of beads interconnected through viscoelastic elements (springs and dampers). The uniqueness of our algorithm lies in its ability to simulate the …

Liquid Interaction With Non-Wettable Surfaces Structured With Macroscopic Ridges, Mehran Abolghasemibizaki

Theses and Dissertations

Self-cleaning, anti-corrosion, anti-icing, dropwise-condensation, and drag-reduction are some applications in which superhydrophobic surfaces are implemented. To date, all the studies associated with superhydrophobic surfaces have been dedicated to understanding the liquid interaction with surfaces that are macroscopically smooth. The current study investigates the solid-liquid interaction of such surfaces which are fully decorated with macroscopic ridges (ribbed surfaces). In particular, the drop motion and impact on our newly designed non-wettable ribbed surface have been investigated in this work. Our experimental investigations have shown that liquid drops move faster on the ribbed surfaces due to lower friction induced by such a surface …

Investigating Smoke Exposure And Chronic Obstructive Pulmonary Disease (Copd) With A Calibrated Agent Based Model (Abm) Of In Vitro Fibroblast Wound Healing., James A. Ratti

Theses and Dissertations

COPD is characterized by tissue inflammation and impaired remodeling that suggests fibroblast maintenance of structural homeostasis is dysregulated. Thus, we performed in vitro wound healing experiments on normal and diseased human lung fibroblasts and developed an ABM of fibroblasts closing a scratched monolayer using NetLogo to evaluate differences due to COPD or cigarette smoke condensate exposure. This ABM consists of a rule-set governing the healing response, accounting for cell migration, proliferation, death, activation and senescence rates; along with the effects of heterogeneous activation, phenotypic changes, serum deprivation and exposure to cigarette smoke condensate or bFGF. Simulations were performed to calibrate …