Engineering Commons^™

Accelerated Aging Of Adhesively Bonded Composite Joints For Use In Material Screening And Selection During Development: A Review And Case Study, Marie Danielle Flanigan

Theses and Dissertations

Adhesively bonded structures are used in many high-tech industries such as aerospace, automotive, and defense. The application of these joints using composite adherends has increased in recent years because of improved strength-to-weight ratio, design flexibility, and lower concern for corrosion. Quality acceptance of these structures largely depends on reliability and durability which includes influence of environmental service conditions on long-term behavior. Characterization of long-term behavior presents a difficult challenge to those involved in material selection and design due to the long service life of the joint compared to the development time available and complexity of the degradation mechanisms. Therefore, different …

Framework For The Utilization Of The Agile Methodology In Engineering Consulting Services, Cristian Daniel Nuñez

Theses and Dissertations

The guidelines that form the Agile methodology framework are developed and adapted to the engineering consulting services industry. Four tools recommended by the literature are developed and adapted for the specific case of this industry. The implementation of the use of these tools is intended to help adopt the Agile methodology more effectively. A company that performs consulting services for airports is taken as a case study. This company did not officially implement the Agile methodology at the time this research has been done. The data is obtained through a survey designed to associate the company's activities with the guides …

Examining The Effects Of Payload Type And Framing On Weather-Related Decision-Making In A Simulated Urban Air Mobility (Uam) Environment, Maria Chaparro Osman

Theses and Dissertations

The purpose of the current research study was two-fold. First, the study examined the effect of payload type on the riskiness of weather-related decision-making in a simulated urban air mobility (UAM) environment. Second, the current study examined whether framing information using prospect theory (Kahneman & Tversky, 1979) could influence the riskiness of weather-related decision-making in a simulated UAM environment. In the context of the current study, riskiness referred to the risk associated with the decision outcome, specifically whether participants selected a risk-averse decision outcome (return to the departure site) or risk-seeking decision outcome (continue to the destination site) based on …

Towards Orchestration In The Cloud-Fog Continuum, Xavier Jesus Merino Aguilera

Theses and Dissertations

The proliferation of the Internet-of-Things has raised demand for computing, storage, and network resources. The cloud model is ill-equipped to handle the volume and variety of data travelling to and from the cloud’s core as more data is generated and consumed at the network’s edge. Some applications necessitate low-latency connectivity and geographical awareness, highlighting the cloud’s centralization shortcomings. By localizing resources, minimizing bandwidth utilization, and lowering latency, the fog and edge layers are proposed to circumvent these limitations. At these layers, resource orchestration is crucial because poor resource management has an impact on service delivery. The aim of this study …

The Deflection And Heat Transfer Analysis Of Injection Mold Cavity With Sla Cooling Channel Insert, Olumide Temidayo Aladesiun

Theses and Dissertations

Fast cooling in injection molding is the critical in the process economy. Among many different cooling channel designs available, conformal cooling offers the best and the most efficient cooling. However, limited awareness, accessibility, complexity, cost, knowledge, and experience limit the use of conformal cooling channels to be used into the mold in a molding process.

Typically, SLM(Selective Laser Melting) method is used to create cavity inserts with conformal cooling channels, however, due to the difficulties listed above, applications of conformal cooling channels are very limited. For an inexpensive alternative SLA (Stereolithography Apparatus) can print cavity inserts with conformal cooling channels. …

Fabrication And Characterization Of Force Spun Polymeric Nanofiber For Drug Delivery And Tissue Engineering Applications, Salahuddin Ahmed

Theses and Dissertations

This study focuses on the development and characterization of polymeric nanofiber for drug delivery and tissue engineering applications. In this study, poly(lactic-co-glycolic) acid (PLGA), Poly-vinyl alcohol (PVA), and Pullulan(PL) were used as the base polymers to develop the nanofiber. Bioactive components Oleanolic acid(OA), Oxymatrine(OM), and Salvianolic Acid(SA) were incorporated in PLGA, PVA, and PL, respectively, via solution mixing. The nano fiber systems were developed using the Forcespinning® method. Morphological, thermo-physical, and biological properties of the fiber mats were analyzed. The composite fiber system containing OA showed a very high drug loading efficiency. The composite fiber system containing high concentration of …

Importance Of Light Activation For Plant Cryptochrome And Antibacterial Drug Delivery Strategies, Merfat Ahmed Hammad

Theses and Dissertations

The goal of this project is to investigate the benefits of applying light in different systems. In the first part, the magnetoreception process that occurs in the light activated cryptochrome of Arabidopsis Thaliana was investigated. In the second part, photo-carbon monoxide releasing molecules (photo-CORMs) were investigated for their antibacterial effect to develop biomedical strategies. Overall, this has been achieved in three different studies. The first study investigated if the forward lightdriven reaction is involved in the magnetoreception process or not in cryptochrome (CRY). To accomplish this, the plant seedlings were tested for 90 minutes as follows: 5 minutes in the …

The Applicability Of Joint Source-Channel Coding Systems To Aeronautical Mobile Telemetry Data, Jesse Richmond

Theses and Dissertations

Broadcast spectrum restrictions require greater efficiency from wireless transmission systems, particularly in applications where sections of spectrum previously reserved for military purposes have been sold to private interests. A joint source-channel coding system, in tandem with smart data selection techniques, is proposed as a potential solution to this problem. The workings of this joint source-channel coding system are detailed, with particular attention given to the decoding process.

Building Software Compliant Multidimensional Datasets Through Programmatic Solutions, Jon Enoch Jones

Theses and Dissertations

Meteorological and other multidimensional, georeferenced data is used extensively in science and engineering. These datasets are produced, shared, and used by organizations all over the world. Conventions have been developed specifying the metadata and format of these datasets in an effort to standardize the data and make it compatible with current and future software and web services. By necessity, the conventions are complex and difficult to implement correctly, resulting in useful datasets that are unusable in many applications due to lack of compliance with the conventions. By programmatically assigning metadata and guiding the dataset creator through the dataset creation process, …

Hybrid Machine Learning And Physics-Based Modeling Approaches For Process Control And Optimization, Junho Park

Theses and Dissertations

Transformer neural networks have made a significant impact on natural language processing. The Transformer network self-attention mechanism effectively addresses the vanishing gradient problem that limits a network learning capability, especially when the time series gets longer or the size of the network gets deeper. This dissertation examines the usage of the Transformer model for time-series forecasting and customizes it for a simultaneous multistep-ahead prediction model in a surrogate model predictive control (MPC) application. The proposed method demonstrates enhanced control performance and computation efficiency compared to the Long-short term memory (LSTM)-based MPC and one-step-ahead prediction model structures for both LSTM and …

Piper Pa-28-181 Archer Iii Tail #931ec Flight Test Stability, Control And Performance, Steven Allan Sutton

Theses and Dissertations

The following flight test was conducted as part of the culmination requirement for the Master of Science, Flight Test Engineer degree program from Florida Institute of Technology. The flight was conducted to gather data and produce a flight test report on the data gathered. The flight test plan consisted of a series of both Stability and Handling test point as well as basic aircraft performance points. The testing was planned to be accomplished over a single flight, for reasons discussed later in this report. The flight departed on the morning of 26 September, 2022 out of Bob Sikes Airport, KCEW, …

Developmental Evaluation Of The B-1b Aircraft, Jonathon Malycke

Theses and Dissertations

The purpose of this test was to perform a Developmental Phase IIA evaluation of the B-1B Lancer for the land-based, long-range, all-weather ground attack mission. One two-hour ground evaluation, one simulator and one flight totaling 7.5 hours was conducted under daylight, visual meteorological conditions from Dyess Air Force Base (AFB) in Abilene, Texas (337th Test and Evaluation Squadron). All test objectives were completed except the low altitude flight evaluation, landing pattern operations, and AFCS operations due to weather, maintenance and time constraints. The test aircraft was representative of a production B-1B aircraft and included a Sniper Targeting Pod and a …

Stress-Based Topology Optimization Of Pi Preform-Bonded Composite Laminate Structure, Iwan Broodryk

Theses and Dissertations

The purpose of this work is to explore the stress-based topology optimization of structure that utilizes laminated composites and 3D woven Pi preform joints. Simple geometry, loading, and boundary conditions are considered. At a finite element level, an aggregate stress ratio is developed for Pi joint and acreage laminate elements. A basic descent method of moving asymptotes (BDMMA) algorithm is created to solve all optimization problems. Topology results for two different stress-based formulations and a compliance minimization problem are compared, followed by an in-depth analysis at a Pi joint and laminate level.

Fabrication Of Solar Absorber Tube With Internal Fin Structure With In718 And Effect Of Boron With In718 For Solar Absorber Tube Using Selective Laser Melting 3d Printing Technology, Naznin Nuria Afrin

Theses and Dissertations

This research aimed to fabricate Solar Absorber Tubes for Solar-Thermal Power Plant with internal fin structures using Selective Laser Melting (SLM) technology. In this study, we investigated the effect of B with IN718 in 3D printing using SLM for solar absorber tubes. The objective was to study the material-process-properties relationship with goal to identify and validate the optimal parameters for the SLM process. Material selected for this study was IN718 with 0.5% and 1% B particle mixed using a V-shape mixing machine. The flowability test was conducted using the Angle of Repose (AOR) method. 3D printed samples …

A Numerical Simulation Of The Powder Bed Additive Manufacturing Process With Molecular Dynamics Simulation, Yeasir Mohammad Akib

Theses and Dissertations

Many manufacturing industries utilize powder bed fusion (PBF) since it can produce microscale precision 3D parts. During PBF, powder particles are selectively fused layer by layer using thermal energy. The build quality in the PBF process relies heavily on powder bed properties and thermal energy deposition. Powder flowability, spreadability, and packing fraction are some of the insightful factors that determine the quality of the powder bed. In this study, a two-dimensional powder bed is developed using the LAMMPS package. A cloud-based pouring of powders with varying volumes and initialization is adopted for the work. A blade-type and circular recoater is …

Ultrafast Laser Direct Writing Of Conductive Patterns On Modified Polyimide Film For Flexible Electronic Applications, Ishrat Jahan Biswas

Theses and Dissertations

Conductive patterns can be printed on a flexible polymer substrate using the direct laser writing (DLW) method. In order to write conductive circuits in such polymer using a laser, polyimide (PI) is a desirable material choice due to its electrical, chemical, and mechanical properties. Electrically non-conductive PI has shown great potential for flexible printed electronics as LDW enables selective carbonization in the bulk of such material leading to the formation of conductive lines. The technique is shown to be a rapid and minimal cost method for printing electrodes to nanoscale devices. However, investigations in this field show several limitations to …

A Study Of The Surface Properties Of Additive Manufactured Inconel 718 After Laser Surface Treatment And Cnc Grinding, Sampson K. Canacoo

Theses and Dissertations

This study investigated the surface properties of additive manufactured Inconel 718 produced through selective laser melting, and the effects of laser ablation and CNC grinding on the surface finish. The objectives were to investigate the effects of the various parameters of laser ablation and CNC grinding on the Inconel 718 surface. The parameters used for the laser experiments were pulse energy (4, 20, and 30 µJ), scanning speed (5, 10, and 15 mm/s), and hatch distance (10, 30, and 50 µm). For the grinding experiments, the wheel speed was kept constant at 20.3 m/sec, however, two different workpiece speed (8.6 …

Effects Of Fibers In Dense Graded And Gap Graded Asphalt Concrete, Franher Daniel Cantu

Theses and Dissertations

As a part of efforts to understand the interactions between fibers and particles in compliant binder such as asphalt. This investigated the compressive behaviors of fiber reinforced asphalt concrete with different aggregate gradation, such as gap graded and dense graded. There have been multiple studies attempting to understand the impact of fibers on particle reinforced composites, however, only few of those focused on the fiber-particle interactions. A comprehensive literature review on the current state of the art of fiber reinforced asphalt concrete and fiber-particle interactions was conducted. Then a series of compression tests were conducted using various size steel fibers …

Safety-Aware Longitudinal And Lateral Control Of Autonomous Vehicles, Randy Guadalupe Chapa

Theses and Dissertations

Safety is undoubtedly the most critical design requirement regarding autonomous vehicle controllers. This research considers an autonomous vehicle to keep a desired distance from the leader vehicle, as well as stay centered within the lane. To achieve this, the lateral control problem and the combined longitudinal and lateral control problem were studied. Adaptive control laws were proposed with the aid of the backstepping technique and the barrier function technique. Simulation was done to verify the effectiveness of the proposed control laws.

Development Of Vegetable Oil-Based Nano-Lubricants Using Ag, H-Bn And Mgo Nanoparticles As Lubricant Additives, Kollol Sarker Jogesh

Theses and Dissertations

Because of the harmful impact of petroleum-based lubricant on the environment and human body, vegetable oil-based lubricant with eco-friendly nanoparticles has a great potential to be an alternative lubricant if it possesses proper lubricating properties. In this study, thermal conductivity, viscosity and tribological properties (wear scar diameter and coefficient of friction) of vegetable oil-based nanolubricant, developed from soybean oil and sunflower oil, modified with Ag, h-BN and MgO nanoparticles as lubricant additives, were evaluated. For thermal conductivity evaluation, a line heat source method was used with KD2 Pro-Thermal Property Analyzer. For viscosity evaluation, Haake Mars 40-rheometer was used to evaluate …

Investigation Of Process Parameters To Fabricate Refractory Medium-Entropy Alloy By Selective Laser Melting Process, Abdullah Al Masum Jabir

Theses and Dissertations

This thesis proposal investigates the synthesis of TiWMo refractory medium entropy alloy (RMEA) by selective laser melting process from elemental powder. Steel, titanium and tungsten substrates were used to study the impact on the formation of TiWMo RMEA. Different process parameters were applied to investigate the effects on melting, diffusion and formation of RMEA. The microstructure of TiWMo and elemental distribution were observed by scanning electron microscope (SEM) and energy dispersive X-ray spectroscopy (EDS). SEM analysis revealed that with higher energy density the pores and microcracks were improved. EDS data validated the composition is homogenized and stable after few layers …

Femtosecond Pulse Filamentation In Dielectric Media Toward Photonics Sensor Fabrication, Anitha Narayanan

Theses and Dissertations

Through pulse filamentation, femtosecond laser pulses have been utilized to modify the refractive indices of dielectric materials such as glass, A-plane sapphire crystal, and Cplane sapphire crystal. The 10x Infinity Corrected Lens was used, and the focusing condition was tuned as being the same and fixed to both glass and sapphire crystals. First, 8uJ of laser energy was optimized to produce controlled pulse filamentation voids in the glass. The laser intensity was then optimized to 2-3.5 uJ, 1.5 uJ, & 2.5 uJ, respectively, for the controlled pulse filamentation in A and C plane sapphire crystals. Due to the different crystal …

A Study Of The Constitutive Models Used In Analyzing Dynamic Strain Aging In Austenitic Stainless Steel 304, Mohammad Mohiuddin

Theses and Dissertations

When triggered, dynamic strain aging has a significant impact on the microstructural mechanical behavior of austenitic stainless steel 304 high performance alloy. The dynamic strain aging phenomenon has been shown to cause significant additional hardening in several experimental studies. To effectively predict the behavior of the material, it is required to employ a constitutive model that includes dynamic strain aging. The extra hardness brought on by dynamic strain aging is captured in this study by the proposal of a novel constitutive model (VAS model) for Austenitic Stainless Steel (ASS) 304 high performance alloy. As part of this study, the developed …

Numerical Simulation Of Vibration - Based Piezoelectric Energy Harvester For Shape Comparison, Adriana Rosas

Theses and Dissertations

This work investigates the shape optimization of piezoelectric energy harvesters subjected to mechanical vibration using ABAQUS/Standard software. Three piezoelectric energy harvesters with different dimensions but the same areas were created to identify if model dimensions have an impact on the output voltage. The models were tested at different speeds to create an output voltage. Once the output voltages were obtained, the results were compared with each other to find if shape optimization on piezoelectric energy harvesters has an impact on scavenging energy from mechanical vibrations.

Water Hardness Removal By Electrochemical Precipitation In A Continuous Flow Condition Using Conductive Concrete As Cathode, Tahsin Tareque

Theses and Dissertations

This study focuses on the electrochemical precipitation (EP) process to reduce excess water hardness from the Lower Rio Grande Valley (LRGV) tap water using electrically conductive concrete as cathode in a continuous flow condition. LRGV tap water is extremely hard with hardness more than 350 mg/L as CaCO3. Humans can pleasantly consume water with hardness less than 150 mg/l as CaCO3 according to World Health Organization (WHO). Hard water is also known to cause mechanical problems to boilers and heat exchangers. In this process, electricity is passed through electrodes submerged in electrolyte, which causes an alkaline environment around the cathode …

Development Of An Electro-Centrifugal Spinning Setup For Nanofiber Production Research, David A. Treviño

Theses and Dissertations

Nanofiber production methods have been developed and improved over the course of decades. Each process allows for the creation of fibers with distinct properties that provide benefits to growing number of applications. On the same note, every process has shortcomings that keep them from being universally valid for all applications. This research considers electrospinning and centrifugal spinning systems and attempts to create a process which maintains high fiber qualities like small and consistent fiber diameters, and improved fiber alignment while providing a high fiber yield. The electro-centrifugal (EC) spinning machine that resulted was designed utilizing computer aided design (CAD) software …

Feasibility Analysis Of Embedding Optical Fiber Sensor Into Additively Manufactured Part, Mahmudul Hasan Porag

Theses and Dissertations

The research tried to examine the viability of the embedment of optical fiber sensors in Additively built components, packaging the sensors within the components, and characterizing the sensors for sensing a specified measurement. Optical fiber sensors are popular due to their small size, resilience against electromagnetic radiation, and reliability in potentially dangerous conditions. Embedding fibers inside a product allows for the monitoring of critical areas, allowing for preemptive action in the case of a breakdown. Coupons of Inconel 718 were made using laser powder-bed fusion (LPBF), with the fabrication settings tuned to determine whether such a development was possible. After …

Simncore: Multilevel Cache Memory Design Simulator For Manycore System, Provashish Roy

Theses and Dissertations

The current trend in a processor design has moved from multicore to manycore (tens to hundreds, or more cores) to support more computational power based on parallelism. One of challenges is how to handle such large number of cores’ data in cache memories through an efficient inter-core communication and cache coherence. To meet the demand, this paper presents a manycore cache memory simulator for research and education purposes. The proposed simulator, called as SIMNCORE, is to design and evaluate various multi-level, such as L1 and L2, cache memories for manycore processing. The SIMNCORE will implement various trace files collected from …

Integrating Model-Based Systems Engineering Industry Transformations For Workforce Development, Wilma Analisa Ankobiah

Theses and Dissertations

This study explores whether MBSE industry workforce requirements are being satisfied by the academic curricula of US institutions. Using an industry survey, which is highlighted in Chapter 3, identifies the existing perception of MBSE from various industries and explores the MBSE needs of professionals, such as tools concepts and languages. It examines how industry professionals perceive MBSE, the advantages and challenges of MBSE use and the preferred MBSE tools, languages and knowledge of concepts deemed necessary to ensure project success in the respective industry sectors. Results of phase 1 industry survey will summarize the current MBSE concepts, tools and languages …

Design And Optimization Of High-Power Density Permanent Magnet Motor With Integrated Cooling For Aircraft Propulsion, Aravindakshan Thirumalai Ananthanpillai

Theses and Dissertations

There is a critical need for the electrification of transportation systems. While power density required for ground-based vehicles can, to some extent, be met by current off-the-shelf motors and generators, aircrafts require significant improvements both in terms of power density and efficiency. The concept relies on the tight integration of a high-power density dual-rotor permanent magnet motor, high power density SiC power converters, and a shared closed loop cooling system rejecting the heat in the propulsion ducted fan air stream. The motor is based on a dual-rotor configuration using permanent magnets forming ideal Halbach arrays allowing for high magnetic loading …