Engineering Commons^™

Numerical Modelling Of Sediments In Cork Harbour, Jérémy Pingon

Theses

In recent years there have been considerable developments in the new and emerging field of hydroinformatics. This relatively new discipline is concerned with the application of computer and networking technology for the planning, management and protection of water bodies.

Environmental issues in estuaries require accurate and detailed knowledge of cohesive sediment transport processes to assess different issues including water quality, pollutant dispersion, and dredging and maintenance of navigation channels.

This thesis presents a review of the main sediment properties and processes required for modelling the behaviour and transport of sediments. It also introduces a new approach to sediment properties using …

An Evaluation Of Model-Based Predictive Control, Daniel Czarkowski

Theses

This thesis attempts to determine whether advanced control algorithms offer any real benefits to the process industry in terms of optimising single-input single output process units. To establish this, an ideal PID controller, Two Degree of Freedom (2 DOF) PID Controller and the Generalised Predictive Controller (GPC) are compared. A common design philosophy is applied based on optimising performance subject to constraints on robustness. Specifically, three different designs are examined; minimum subject to constraints on the gain and phase margin, minimum lAE subject to constraints on the modulus margin and minimum lAE subject to constraints on the input sensitivity function. …

Characterisation, Modelling And Performance Evaluation Of Cmos Integrated Rf-Mems Multielectrode Tunable Capacitor, Zbigniew Olszewski

Theses

The circuits used in telecommunications are made of two types of components; active integrated circuits that have continuously been improved together with the evolution of the Si technology and off-chip and on-chip passive components. The latter did not profit from much development and now constitute the bottleneck for further integration of RF (Radio Frequency) integrated circuits. MicroElectroMechanical Systems (MEMS) is rapidly emerging as an enabling technology to yield a new generation of high performance components to replace off-chip (not integrated) and on-chip (poor performance) counterparts. The RF components (RF-MEMS) that can be fabricated with MEMS technology are mainly the resonator, …

Automated Control Of Led-Based Illumination Using Image Analysis Metrics, Stephen Mills

Theses

This project discusses a microprocessor controlled illumination system that covers the visible spectrum. It uses multiple discrete wavelength LEDs. Spatial and spectral illumination profiles are achieved by controlling LED currents with an array of voltage controlled current sources. A highly efficient polycarbonate holographic diffuser is used to improve the uniformity of the distribution. System design is underpinned by accurate characterisation and modelling of the LEDs used.

Image analysis techniques are then used to parameterise the recorded scene and to provide a figure of merit for the quality of the illumination. Several functions such as contrast, low/high saturation, average brightness and …

Pervaporation Of Water From Solvent Solutions, Richard Manning

Theses

Pervaporation is an emerging membrane technology which has found acceptance as a method for the dehydration of organic solvents.

An existing pervaporation apparatus was modified to accommodate a new type of pervaporation membrane. The instrumentation used with the pervaporation apparatus was upgraded to include a Keithley Data Logger. A HAZOP was carried out on the modified pervaporation apparatus to ensure the apparatus was safe to operate after the modifications were completed.

The pervaporation apparatus was initially tested using screening experiments to verify that changing the operating parameters produced a measurable response which could be recorded. The pervaporation apparatus was successfully …

Multispectral Camera Control And High Speed Image Transfer Using Lossless Hardware Compression, Padraig Ryan

Theses

This work provides extensions of a standard D-Cam/Firewire digital camera platform for use within a multispectral imaging setting and includes real-time lossless image compression targeted at the re-configurable environment of an FPGA. The control and image acquisition structures specific to multispectral systems are detailed with respect to an embedded firmware solution, complementary host PC software driver routines, and camera hardware control infrastructures. The augmentation of the standards based implementation is discussed without compromising compliance with underlying specifications. The mandate for image data acquisition includes glue logic to efficiently transmit data via a high-speed communications pipe, IEEE - 1394 in this …

Controller Design And Web-Based Simulation For A Pasteurisation Process, Luis Torres

Theses

The basic PID controller remains the most commonly used automatic feedback control technique in industry. Many tuning techniques exist for this controller and the use of tuning rules remains very popular, both in industry and academia. This thesis is concerned with the practical evaluation of a selected number of PID tuning rules. The rules were to be evaluated on an industrial pilot-scale milk pasteurisation process. However, most of these rules could not be tested on the real plant as the industrial distributed control system was quite inflexible and did not permit many of the more advanced PID structures e.g. two-degree …

Coupled Thermal Fluid Modelling Of A Low Embedded Energy Solar Thermal Collector, Myrrha Corcoran

Theses

Flat-plate collectors are the most economical and are popular in solar domestic heating water system since they are usually permanently fixed in position, have simple construction, and require little maintenance. The design of a solar energy system is generally concerned with obtaining maximum efficiency at minimum cost. The aim of this thesis was to develop a mathematical model, for a forced convection solar heated water system. The solar collector in this study incorporated a honeycombed extruded polycarbonate structure, for both the cover and water channels.

A very detailed thermal analysis of the flat-plate solar collector was carried out to predict …

Investigations Of The Kinetics Of Liquid Droplets On Soil Substrates Using A Novel Approach: Contact Ratio, Abdelhafiz “Moh’D Adnan” Herbawi

Theses

In view of young’s equation, in which the contact angle “ϑ” and the liquid surface tension γ_lv are the only measurable parameters, the contact angle has been widely conceived as a thermodynamic quantity. Accordingly “ϑ” has been the main focus of most theoretical and experimental investigations. The rate of change in the contact angle has been commonly used as the relevant parameter of spreading dynamics in spite of difficulties associated with contact angle measurements that are well recognized in the literature. Considering that the velocity of the contact line is the pertinent quantity for spreading, it is therefore reasonable …

Ductile Crack Growth Emanating From Sharp Notes In A Low Alloy Steel, Aladdin I. Abu-Assi

Theses

Stable crack growth behavior emanating from a sharp notch is investigated. Material chosen for tests was EN 34 NiCrMo6 low alloy steel (akin to 4340/4330). Tests were carried out on CT specimens for various angles and ratios to obtain load vs, load-line displacement, Ρ-Δ_LL, curves. Experimental results were analyzed. A normalization approach of Ρ-Δ_{LL curves has been attempted and all experimental curves were represented as a single characteristic curve. Such approach has been also applied on experimental data available from other experimental investigations and results were encouraging, as it may address transferability issue. Fracture surfaces were …}

Investigation Of Epoxy Resin Spreading On Glass Surfaces, Haneen Nemer Al-Dahdooh

Theses

The spreading of a small epoxy resin droplet (l.5tL) on a glass surface was examined with the objective of developing a new type of hydrophobic polymer coated glass which has the ability to reduce heat gain inside a building. The study covered three main aspects; the spreading kinetics of epoxy resin on a glass surface, the hydophopicity of the developed polymer-coated glass surface, and the reduction of solar radiation of this surface, As wettability and spreading phenomena arc a fundamental prerequisite for coating, the spreading kinetics of different curing agent concentrations (15:200, 18:200, 21:200) of epoxy resin on the glass …

Heat Transfer Model For The Ignition Of Metal Powder On A Heated Filament, Trent Stanton Ward

Theses

The thermal processes leading to ignition of metal powders in environments that experience rapid temperature changes are currently poorly understood. In this research, a methodology for studying and quantification of such processes is developed. In the experimental case study, the ignition temperature of Mg powder coated on the surface of an electrically heated filament is detected optically at different heating rates. To interpret the results, a heat transfer model has been developed for a multilayer powder coating on top of an electrically heated filament. The coating is modeled using a hexagonal close packed geometry and the heat transfer equations are …

Microwave Processing Of Fiber Reinforced Composites (Optimization Of Glass Reinforced Epoxy Curing Process), Mohamed Osama Ali

Theses

Microwave curing of polymer matrix composites has proven to be an attractive substitute for conventional thermal curing. Industrial applications are currently developed including telecommunications, aerospace, food industry, enhancement concrete setting, composites manufacturing, and many others. Many universities and research centers around the globe are endeavoring to make use of this technology to the most. Common research objectives include homogeneity of the cure, the acceleration of cure kinetics, cure reaction mechanism, and enhancement of mechanical properties. In order to efficiently utilize this form of energy, precise control over power, temperature, and time were applied to achieve set goals: reduce cure time …

Thermal And Mechanical Properties Of Polyethylene-Polypropylene Blends, Rania Omar Akkad

Theses

The thermal and mechanical characteristics of thermally treated and untreated pure polyethylene (PE), pure polypropylene (PP) and their blends were investigated. Injection-moulded samples containing 100:00,75:25,50:50,25:75 and 00:100 weight percentage of PE:PP, were prepared and thermally treated at 100°C for 0, 2, 4, 7, 14 days. The treated samples were subjected to differential scanning calorimetry (DSC), thermogravimetry (TG & DTG), infrared spectral analysis (IR) and tensile tests in order to study the effect of thermal treatment and blending ratios on their thermal and mechanical properties. The results indicate that addition of PE causes the melting temperature (T_m) of PP …

Effect Of Bond Thickness On Lifetime Of Adhesive Joints, Ehab Mohammed El-Said El-Refaai Shehab

Theses

The aim of this research was to study the effect of bond thickness on the fracture energy and the lifetime of an adhesively bonded system and develop a model to predict the lifetime of adhesive joints. An approach based on fracture mechanics was employed to assess aluminum/epoxy bond lifetime. An experimental investigation was carried out using double cantilever beam (DCB) specimens with various bond thicknesses under mode 1.

This study describes an approach to predict the rate of crack propagation using Paris' power law. The approach used elevated temperatures to accelerate the crack propagation under constant loads. The elevated temperatures …

The Evidence For A Nascent Biotechnology Cluster In Cork, John W. Hobbs

Theses

Over the past 30 years, encouraged by Ireland’s low rate of corporation tax (currently 12.5 %), and active promotion of FDI by the IDA, foreign owned pharmaceutical plants have set up and multiplied in the Cork area. To Ireland’s advantages of a low tax rate, an English speaking population, a pro-business environment and membership of EU, Cork offered the added attractions of a deepwater port and large natural harbour, good freight connections, an international airport, an educated workforce and excellent sporting and leisure facilities for sailing, golf, etc. (Pfizer, Eli Lilly, Novartis, GlaxoSmithKline, Johnson & Johnson and Schering Plough have …

Stabilization Of Desert Sand Using Water-Borne Polymers, Shihab Wagiealla Abdalla Mohamed

Theses

Soil stabilization is one of the various applications that have benefited from the advances in polymeric materials. In this research, three water-borne polymeric emulsions with different chemical and physical properties were tested as stabilizers for sandy soil.

This study is divided into three parts. In the first part, the performance of the three emulsions in reducing the hydraulic conductivity and improving the mechanical properties of the sand was investigated. Specimens with polymer contents of up to 2 wt. % were prepared using two preparation methods, mixing and spraying. Both types of specimens exhibited a significant improvement in the studied properties. …

Ab Initio Calculation Of Electronic And Optical Properties Of Beryllium Chalcogenides (Bes, Bese, And Bete) Under The Effect Of Pressure, Aisha Ali Saif Bannan Al-Kaabi

Theses

There are several methods for materials simulation. Ab initio or first principles methods are used to solve the quantum mechanical equation which govern the behavior of a system. Ab initio calculation of the optical and electronic properties of solids is fundamental in solid state physics. APW+lo is used to examine different properties of BeS, BeSe and BeTe. Beryllium compounds show different features in structure under different pressures, and they also show a phase transition from Zinc blende to Hexagonal transitions in II-VI semiconductors. Little is known about the ground state properties of Beryllium Chalcogenides. The aim of this work is …

Carrier Transport In Ge Nanowires And One Dimensional Si/Ge Heterojunctions, Eun Kyu Lee

Theses

Ge Nanowires (Ge NWs) on single crystal, (100) and (111) oriented n-type Si substrates were grown via the vapor-liquid-solid (VLS) mechanism and studied with respect to their electrical properties.

Using different contact geometries, direct current (DC) and alternating current (AC) electrical and photoelectrical measurements were carried out at room temperature to investigate electrical properties of Ge NWs and Ge NWs/Si substrate one-dimensional (1 D) heterojunctions (HJs). A rectifying junction behavior is observed at NWs/substrate interface, but many orders of magnitude greater AC conductance than DC in Ge NW volume is measured at high frequencies. The obtained experimental data are consistent …

Fluidization Of Agglomerates Of Nanoparticles Under Different Force Fields, Jose A. Quevedo

Theses

Nanoparticles are the focus of many research activities, and in the near future they will be handled in large amounts by industry. Fluidization is a very important unit operation which is applied in several industrial processes.

In the present work, fluidization experiments with agglomerates of nanoparticles were done under different force fields: (1) gravity force or conventional fluidization; (2) a magnetic force field, which uses magnetic particles under the influence of a magnetic field; and (3) a centrifugal force, generated by a rotating frame that simulates higher gravity conditions.

Among the significant results with agglomerates of nanoparticles, conventional fluidization was …

Spectrum Control And Iterative Coding For High Capacity Multiband Ofdm, Divaydeep Sikri

Theses

The emergence of Multiband Orthogonal Frequency Division Modulation (MB-OFDM) as an ultra-wideband (UWB) technology injected new optimism in the market through realistic commercial implementation, while keeping promise of high data rates intact. However, it has also brought with it host of issues, some of which are addressed in this thesis.

The thesis primarily focuses on the two issues of spectrum control and user capacity for the system currently proposed by the Multiband OFDM Alliance (MBOA). By showing that line spectra are still an issue for new modulation scheme (MB-OFDM), it proposes a mechanism of scrambling the data with an increased …

Ultra Wideband Communication Link, Preeti Singh

Theses

Ultra-wideband communication (UWB) has been a topic of extensive research in recent years especially for its short-range communication and indoor applications. The preliminary objective of the project was to develop a description and understanding of the basic components of the communication link at microwave frequencies in order to achieve the primary objective of establishing a communication setup at a bandwidth of 2.5 GHz for testing Ultra Wideband (UWB) antennas. This was achieved with the aid of commercially available optical system which was modified for the purpose. Beginning with the generation of baseband narrow pulses with energy spanning over a broad …

Surface Treatment Of Ferrous Alloys With Boron, Naruemon Suwattananont

Theses

Boronizing is a thermo-chemical surface hardening treatment in which boron atoms diffused into the metal substrate form the metallic boride layer, providing high hardness, corrosion resistance, and 3-10 times increasing service life. This type of surface treatment is widely used in many applications.

The purpose of this work was to investigate the structures and properties of boronized ferrous alloys. Three types of steels, AISI 1018 (plain low carbon steel), AISI 4340 (high strength alloy steel), and AISI 304 (austenitic stainless steel), were used for this study. The boronized AISI 1018 and AISI 4340 demonstrated the saw-tooth structure with average 75-76 …

Thermal Analysis Of Poly(Desamino Arylates), Ali Cem Recber

Theses

The goal of this study is to better understand the thermal characteristics and molecular behavior of two poly(desaminotyrosyl arylates). These two polymers were chosen from a combinatorial library of polymers developed by changing the type and size of the two substitutable chain locations. TGA, DSC and TSC studies were conducted on Poly(12,10) and Poly(2,2) after the samples were exposed to various conditions. The TGA of Poly(12,10) shows low water uptake at 25° C, higher water uptake at 80°C. Water uptake for Poly(2,2) at 25°C is similar to Poly(12,10) at 80°C. The Thermally Stimulated Current analysis (TSC) results indicate a molecular …

Detection Of Denial Of Service Attacks Using Database Queries, Dmytro Zakhalyavko

Theses

In the current intrusion detection world, most intrusion detection systems output data into flat files. This project was conducted in order to improve intrusion detection data and alerts by writing them into a database system and analyzing them with SQL. A database plug-in was developed that helps to transition the data from an intrusion detection system to a database. Storing, analyzing, categorizing, and accessing data are major advantages and reasons for using databases in intrusion detection. Security analysts have to constantly perform the difficult task of sorting through a haystack of attack alerts, many of which turn out to be …

Characterization Of Mechanical Behavior Of Electrospun Non-Woven Mats, Ajitha Patlolla

Theses

Electrospinning is a simple and efficient method for the production of nanometer to micrometer fibers. While the process of electrospinning has been known for over half a century, current understanding of the process and those parameters that affect the properties of the fibers is very limited. Not much work has been done in the field electrospinning process to study the mechanical properties of nonwoven mats produced and to study parameters affecting their properties.

In the first part of this thesis electrospun nonwoven mats made of poly(lactides) solutions were characterized based on their mechanical behavior in biorelevant conditions. In the second …

Crystallization Kinetics Study Of The Glasses In Se–Te System, Fareed Abdul Raheem Al-Gheyath

Theses

The aim of the present work is to study the crystallization kinetics of some chalcogenide glassy alloys in the Selenium-Tellurium system. Four glassy systems have been prepared: Se₈₀Te_20-xSb_x (x= 0, 4, 6, 8, and 10); Se₇₀Te_30-xSb_x (x= 2, 6, 8, and 10); Se₈₀Te_20-xCd_x (x= 2, 4, and 10); and Se₈₀Te_20-xSn_x (x= 2, 4, and 10). The starting materials of (99.999%) purity were weighted according to their atomic percentages and sealed in evacuated silica tubes, under a pressure of about 10 …

Investigation Into The Current Statistical Distribution For Oxide Breakdown Versus The Oxide Thickness Used In Integrated Circuit Manufacture, Eoin James O Driscoll

Theses

A critical aspect of integrated circuit manufacturing is the reliability of the components, in particular the gate oxide of transistors and capacitors. Accelerated stress tests are used for reliability predictions of gate oxides. There are two statistical distributions, which can be applied to stress test failure data, namely the Lognormal or the Weibull distributions. The failure data can fit each distribution equally well. However the use of either distribution will give vastly different lifetime predictions and their correct use is crucial for accurate lifetime prediction. A statistical based test, developed with Monte Carlo data, which is designed to decide if …

Rehabilitation Of Concrete Structure Using Composite Materials, Ibtesam J.Saeed Al-Saifi

Theses

In the United Arab Emirates, most of the concrete structures including road, infrastructure and different types of buildings have been reported to be in need of rehabilitation. It is universally acknowledged that the environment of the countries in the Arabian Gulf is extremely severe and very aggressive to construction materials and operations. It is anticipated that the cost of rehabilitation of civil infrastructure will gradually increase over the next decade as a direct consequence of the increase in the number of structures reaching their expected service life.

Accordingly demand on rehabilitation methods will increase. In addition the severe climatic conditions …

Mathematical Modeling And Simulation Of Human Motion Using 3-Dimensional, Multi-Segment Coupled Pendulum System : Derivation Of A Generalized Formula For Equations Of Motion, Loay Ahmed-Wasfe Al-Zube

Theses

The use of mathematical models to investigate the dynamics of human movement relies on two approaches: forward dynamics and inverse dynamics. In this investigation a new modeling approach called the Boundary Method is outlined. This method addresses some of the disadvantages of both the forward and the inverse approach. The method yields as output both a set of potential movement solutions to a given motor task and the net muscular impulses required to produce those movements. The input to the boundary method is a finite and adjustable number of critical target body configurations. In each phase of the motion that …