Engineering Commons^™

The Measurement Of Depolarized Radiation For Monitoring The Mass Concentration Of Particulates, Bruce E. Wilson

Theses

The depolarization of backscattered polarized incident radiation which is expressed as a depolarization ratio was investigated as a means of monitoring the mass concentration of particles in stacks from coal-fired burners. This involved the design of an instrument that would detect small levels of radiation. Two methods were investigated. The first utilized a Gallium Arsenide laser and a silicon detector diode; the second was composed of a xenon flash lamp and a photomultiplier detector tube.

The relationship between the depolarization ratio and the mass concentration of diamond particles in the 0.01 gm/m³ to 0.5 gm/m³ was determined. Diamond …

The Slow Settling Of A Sphere In A Viscous Fluid In The Proximity Of A Corner, Joseph Kisutcza

Theses

Experimental settling velocities for three different sizes of Delrin spheres in Ucon lubricant were determined at 20.2 degrees Celsius in order to confirm the validity of a theoretically derived equation for the settling of a sphere in the proximity of a corner. The experiments were conducted in a wedge shaped column with a circular sector base, filled with the viscous fluid, where the angle of the wedge was varied for experimental purposes. The distance from the wedge apex to the particle was also changed for the different runs.

The experimental data gave a good approximation of the values evaluated by …

Semicontinous Ph-Parametric Pump : Experimental Study, Hsien-Chih Lee

Theses

Voidage of SP Sephadex (C-50) ion exchanger at different aqueous buffer concentration and the pH have been estimated from draining the interstitial aqueous. Experimental results of the SP Sephadex (C-50) voidage at pH cycling zone are in quantitative agreement with previous test method, so the voidage estimated from draining the interstital aqueous can be used in pH-parametric pumping. The optional displacement volume in semicontinuous pH-parametric pump of different buffer concentration can be predicted from voidage. A semicontinuous pH-parametric pump for separating proteins has been experimentally investigated using the model system haemoglobin and albumin on a. SP Sephadex (C-50) ion exchanger. …

Possible Efficiency Improvements In Residential, Gas Fired Furnances, Philip Louis Rinaldi

Theses

This project examines the problem of how to improve energy utilization in a residential space heating environment. Techniques for lowering unit energy consumption are developed and the feasibility of their implementation is discussed.

The project development first establishes the magnitude of the energy wastage problem for the individual consumer and its impact on the national scale. It must be emphasized that these represent two, sometimes distinctly different justifications for reducing energy use in the home. What may be considered only a small personal waste of $50 to $100 per year may indeed--when viewed in aggregate--represent a significant burden on the …

Management Of Manpower Planning In A Job Shop, John E. Yadlon

Theses

The object of any system of manpower planning is to provide a means to optimize manpower utilization. Within this base there is the normal requirement to provide effective utilization of equipment, materials and manpower. In a production type of environment, studies, statistics, research and supervisory manpower are readily available to best optimize manpower planning. In a job shop environment only fragments of these elements are available. Also, the available supervisory time for studies and implementation of research into statistics is usually very small. The net result is that manpower management in a job shop is all too often guessed at. …

The Introduction Of A Computerized Production Control System In A Small Manufacturing Company, Harry Leroy Zimmerly

Theses

The purpose of this thesis is to acquaint the reader with the intricacies of introducing a computerized production control system into a small manufacturing company. To do this a hypothetical company was described as it existed with a manual production control system. The information flow of the manual system was described in detail.

Potential computerized production control systems with a shop data collection system were then investigated. A computerized system would expedite information flow, allow rapid assembly tracking, take accurate data and reveal the actual cost (including labor cost) of an assembly. This was done first by examining technical publications. …

The Countercurrent Multistage Desorption Of The Acetic Acid/Water Solution With An Inert Vapor, Michael John Danko

Theses

The desorption of a acetic acid and water solution with an inert gas was experimentally investigated using a perforated plate distillation column having 17 actual trays. An inert air stream flowing countercurrent was used to strip the water from the acetic acid and water solution.

The feed composition was 0.2509 mole fraction acetic acid. The experimental results showed the best obtainable separation to be 0.16118 and 0.3965 mole fraction acetic acid in the overhead condensate and bottoms respectively, at an average column operating temperature of 56.0 degrees centigrade. The concentration of acetic acid predicted by calculation is 0.003917 and 0.9860 …

A Kinetic Study Of The Reactions Of Poly-L-Lysine With 1-Halo-2, 4-Dinitrobenzenes, Raymond K. Rakowitz

Theses

The kinetics of the reactions of poly-L-lysine with 1-Fluoro, 1-Chloro, 1-Bromo, and 1-Iodo-2,4-Dinitrobenzenes have been studied. The investigation was done at 25°C as a function of pH and concentration. In all cases the rate of reaction increased as pH increased. In the reactions of Chloro, Bromo, and Iododinitrobenzenes with Polylysine the reaction rate is the composite of two rates; one associated with the random coil and one associated with the helical conformation. For the reaction of Fluorodinitrobenzene with Polylysine the reaction rate is the composite of four rates; two associated with the random coil and two associated with the helical …

So2-Scrubber Technology : Double Alkali Mode, Krishna K. Rao

Theses

Double alkali (D/A) processes for the desulfurization of flue gases occupy an increasingly important role in applied technology.

D/A processes involve two steps, namely, scrubbing and regeneration. In the scrubbing step, the alkali (Na₂SO₃) reacts with SO₂. In the regeneration step the acid formed, NaHSO₃, reacts with an alkali to regenerate Na₂SO₃.

This study was focused on the regeneration step. Regenerants investigated were slurries of lime and limestone. The major factors studied were reactor configuration and mixing patterns.

These systems were investigated in a batch, backmix, and plug-flow …

Municipal Point Source Pollution In The Hackensack Meadowlands Estuary, Alfonso Augustine Hernandez

Theses

A study was performed to evaluate the effectiveness of various sewage treatment facilities in the Hackensack Meadowlands District. The study dealt with overall plant efficiencies based on percent removals of suspended solids and Biochemical Oxygen Demand although other parameters were also included.

Samples for this study were obtained from the inlet and outlet channels of the individual plants. The parameters studied were: Suspended Solids, Biochemical Oxygen Demand, Total Nitrogen, Nitrate-Nitrite Compounds, Total Organic Carbon, Orthophosphate-P, Total Oxygen Demand and Fecal Coliform. Results obtained were averaged so as to collectively represent wet and dry weather conditions.

The results indicate that most …

The Separation Of Proteins Via Parametric Pumping And Ion Exchange, Paul Albert Falcon

Theses

A pH parametric pump, coupled with ion exchange, was used in an experimental investigation to separate a protein-water binary mixture. The model system consisted of a hemoglobin-water binary mixture. A pH gradient throughout the parametric pumping column was sustained with the use of hollow fiber devices incorporating phosphate buffer circulation.

Data is presented for both batch and semi-continuous recuperative mode pH parametric pumping. Continuous pH parametric pumping for protein isolation has also been envisioned.

No attempt has been made to optimize this newly devel-oped process; however, certain parameters are suspected of controlling separation, including buffer concentration, half cycle time, packed …

The Settling Of Particles In A Square Contained Medium, Richard S. Matyas

Theses

Stokes' Law, has been standardly utilized to calculate the terminal velocity of falling particles. However, the limitation of Stokes' Law is that it does not take into account the container walls and their resulting drag forces. Extensive work with additional drag due to cylindrical container walls has been examined by many investigators. The classical and earliest is the well know Ladenburg Correction which cannot be utilized with non-cylindrical containers. This experimental thesis examines the analog of the Ladenburg relationship for a square container. This experimental thesis was undertaken to experimentally determine the value of the constant K₁ for a …

The Guarding Of The Principal Metalworking Machines : The Techniques, Need, And Responsibility, Peter James Schwalje

Theses

This thesis examines the guarding of the principal metalworking machines employed in the economy. The machines selected for consideration comprise the bulk of metal processing equipment utilized in the basic fabrication and manufacturing processes. It has been intuitively recognized that this equipment has been involved in a significant quantity of industrial accidents by the very nature of the hazards created by their normal use. Consequently, a need to develop some form of guarding or means of operator protection is called for.

In order to examine this question the principal metalworking machines are enumerated, their basic operating characteristics set forth,, and …

Growth Patterns Of Bacteria In Pressurized Sewage, Dennis Mazzei

Theses

Primary sewage was pressurized at 100 psi for one hour. The effects of this pressure on the growth patterns of general and nitrifying bacteria were examined daily for eighteen consecutive days using Standard Plate Counts and Most Probable Number (MPN) estimates. In conjunction with these tests, the degree of biodegradability was also determined by measuring both daily biochemical oxygen demands (BOD's) and dissolved oxygen levels.

Graphical analysis of experimental data compare the BOD's exterted [sic] by microorganisms to their respective numbers of colonies as determined by plate counts of both pressurized and non-pressurized sanitary sewage diluted to 3. 00%. The …

Ecuador And A Business Opportunity, Cesar Arturo Paredes Roldan

Theses

As a result of its recent status as a petroleum exporting country, Ecuador is enjoying an economic boom, which is expected to lead to the formation of new enterprises, the creation of jobs, the utilization of human and natural resources and the encouragement of harmonious development of the national economy.

This thesis is based on the belief that the private sector must assume a decisive role in the adequate implementation of Ecuador's industrial development programs, and it aims to show the feasibility of establishing there an enterprise that would manufacture domestic electric irons.

The coverage of the subject comprises three …

Thermal Decomposition Products Of Kynol And Nomex With Reference To Structure And Toxicity, Shaker H. El-Sherbini

Theses

The purpose of this investigation was to study the combustion products of KYNOL and NOMEX as a fire retardant fibers. From the quantitative analysis data of the combustion products, the polymer structure is discussed and the property of thermal stability is explained.

From the analysis of the combustion products, the toxicity indices for the two fibers are determined. It is found to be 0.1 for KYNOL and 0.71 for NOMEX. This can be interpreted to mean that, if one gram of MIDI, is decomposed and the combustion products were diffused in one cubic meter of air, the probability of dying …

The Anisotropic And Isotropic Strength Behavior Of An Illitic Clay, Miles M. O'Brien

Theses

The cause and the nature of anisotropy in a cohesive soil was investigated by direct shear and triaxial compression tests. Laboratory techniques and procedures used to prepare isotropic clay samples are given where consolidation was accomplished under hydrostatic pressure. Direct shear tests were performed on these specimens trimmed at different inclinations to the physical horizontal from the block samples. The ratio of undrained shear strengths in any direction to shear strength in the vertical direction was found to be equal to one, proving isotropy existed. Similar tests were performed on specimens trimmed from the same clay consolidated one-dimensionally. Results from …

Dynamics Of The Glucose-Insulin-Glucagon System, Joseph P. Hartmann

Theses

A computer model for the Dynamics of the Glucose-Insulin-Glucagon System has been developed for a 17.5 kg canine using the Continuous Systems Modeling Program (CSMP) for the 360 Computer System. The major body components controlling the glucose dynamics (liver, pancreas, body muscle, blood flow, and body fluid compartments) have been modeled in terms of either their production, absorption, or transport of glucose, and the concentration levels of both the hormones and substrates perfusing the body component. A set of mneumonics has also been developed to label the hundreds of constant and variable terms required to describe a complex system of …

Vapor-Liquid Equilibrium At Low Pressures : Correlation Of Binary And Prediction Of Multicomponent Data, Norman I. Silverman

Theses

The Wilson equation is chosen as typical of the new correlations for activity coefficients gaining wide distribution for use in the correlation and prediction of vapor-liquid equilibria today. Vapor liquid equilibrium data for 247 binary systems have been regressed against each of ten (10) objective functions and values of the Wilson energy parameters obtained. For the typical binary system, a wide variation of the Wilson energy parameters are observed when different objective functions are used with the given set of binary data. These are each examined with respect to their capability to correlate multicomponent vapor-liquid equilibrium data for seventy-three (73) …

An Experimental Study Of Separation Of Binary And Ternary Gas Mixtures By Parametric Pumping, Stephen E. Belsky

Theses

An experimental study of gas parametric pumping is presented which examines the purification of helium using silica gel to remove the impurity carbon dioxide. Low gas flow rates are used to allow adequate time for equilibrium to be approached, assuming intraparticle diffusion is the controlling mass transfer step. By varying the cycle time, at long cycle times, the effect of penetration length (a function of dynamic capacity) is indicated. Also, at low cycle time, the effects during pressure changes become more significant.

Using low flow rate improves separation effectiveness if evaluated at equal dynamic capacity. When using low flow rate …

The Effect Of Ultrasonic Vibrations And Catalyst Particle Size On The Decomposition Of Cumene, John F. Pietranski

Theses

The effect of ultrasonic vibrations on the vapor phase decomposition of cumene to benzene and proplyene was investigated using silica-aluminum as the cracking catalyst.

The system consists of a tubular reactor with a 4 inch long catalyst chamber made from 1 cm. diameter stainless steel tubing. The catalyst bed was irradiated from above by means of an ultrasonic horn.

The reactor was run at temperatures of 850 to 950°F., frequencies of 26,000 and 39,000 Hz, with a power innut of 0.30 watts/cm.² . Feed rates of 100 to 300 gms./hr. and catalyst particle sizes of 0.0209 to 0.358 cm. …

Non-Equilibrium Parametric Pumps For Separating Liquids Or Gases, Anil Krishna Rastogi

Theses

An experimental and theoretical study has been done of Non-Equilibrium parametric pumps. Mathematical models and computer programmes are developed for both thermal and heatless parametric pumps based on non-equilibrium conditions and linear isotherms. A mathematical study was done for thermal parametric pumps whereas both experimental and theoretical studies were made for a heatless parametric pump. The effect of different operating conditions has been investigated on the separation of NaCl-H₂O via a thermal parametric pump and He-CO₂ and He-C₃H₆ gas mixtures via a heatless parametric pump.

The experimental study of heatless parametric pumps was extended …

An Approach To Energy Conservation In A Manufacturing Industry, William Polignano

Theses

The approach attacks the problem of control and planning of energy usage via three major categories. These areas are: detection, forecasting and reporting of energy usage.

To initiate any energy program the first step, is the identification of the areas that use the most energy, thus allowing detailed studies to be concentrated in these energy-intensive areas. The author has attempted to show which areas are energy-intensive in his employer's plants.

The second step is the accurate forecasting of energy usage. The author has attempted this via an econometric forecasting model that accurately predicts energy usage based on direct labor hours …

Air Control In A Newark City Subway Station, Robert H. Burch

Theses

During the period from June, 1974 to January, 1976, 103 24-hr samples of the air at the Broad Street station of the Newark City Subway were collected by cascade impactor. The size distributions (based on Stoke's equivalent diameters) of the total suspended particulate matter were determined gravimetrically. Samples were also analyzed by atomic absorption spectrometry to obtain information on the concentration of iron, manganese, lead, copper, zinc, and cadmium in each size fraction. The geometric mean particulate level was found to be more than twice the Federal Ambient Air Quality Standard and triple that of ambient Newark air sampled nearby. …

Point Of Operation Safeguarding - A Metal Forming System Approach, William Baker Eaton

Theses

The mechanical power press in its application in the metal stamping and forming industry has been misinterpreted as a selfcontained metal forming system. Examination of the production routines involving the press show that this machine is actually only one elemental component of the metal forming system and not the total production unit.

Authoritative codes and standards pertinent to the mechanical power press have reflected this misinterpretation by not including system considerations in their contents. These omissions have resulted in the providing of safeguards which do not properly reflect the particular characteristics of the metal forming system to which they are …

Sparsity And Decoupling In Load Power Flow Analysis, Kenneth Nazimek

Theses

This paper presents some recent ideas on and methods created by power engineers for the solution of the Load Flow Problem. Beginning with an analysis of the solution of large systems of linear equations, techniques employing elementary matrix operations are discussed to reduce the amount of calculations necessary to achieve repeated solutions. Recent interest in taking advantage of the characteristic sparsity of the admittance matrix is also examined. The problems of operating on and computer storage of large sparse matrices are investigated. Methods to efficiently order, store and work with large sparse matrices are discussed and demonstrated. The general acceptance …

Analysis Of Combustion Products Of Kynol And Nomex, Abdul Halim Hassan Housny

Theses

The gaseous products generated by flaming combustion of Kynol and Nomex fibers under the same conditions (temperature 300-700°C, natural air) were quantitatively analyzed by infrared spectrophotometry, gas chromatography, mass spectrometry and a colorimetric tube method. The four techniques were chosen to examine the wide range of volatile and condensable products expected due to their different capabilities and sensitivities.

The main gases generated were carbon monoxide, carbon dioxide, methane and benzene.

The mass spectrometer was used to identify the condensed vapors. These were mainly phenol, methyl phenol and dimethyl phenol from the Kynol fiber and benzene, aniline, diaminobenzene, benzoic acid, benzonitrile, …

The Effects Of Pressure On The Biodegradability Of Sanitary Sewage In A Model Activated Sludge Reactor, Nicholas A. Mezei

Theses

Based on existing information concerning the effects of pressure on the biodegradability of sanitary sewage, a model activated sludge reactor was used in conjunction with pressurization to determine the viability of pressurization as a primary sewage treatment process.

Municipal sewage samples were pressurized at 40 psig for one hour with an excess of oxygen. An air compressor and a steel drum were used for sample pressurization. A non-pressurized control sample was maintained. After pressurization, the samples were fed into separate model activated sludge reactors. Biodegradability of both types of effluent was measured by determining their five day biochemical oxygen demands …

An Experimental Study Of Semi-Continuous Ph-Parametric Pumping With A Center Feed, John S. Dell'osso

Theses

Parametric pumping represents a new development in separation science. It has attracted considerable attention both because of its novelty and because it permits continuous operation in small equipment with very high separation factors. The basic principle of parametric pumping is to utilize the coupling of periodic changes in equilibrium conditions caused by periodic changes in some intensive variables (temperature, pH, electric field, etc.), and periodic changes in flow direction to separate the components of fluid which flows past a solid adsorbent. Applications of parametric pumping involving the separation of valuable materials such as proteins would be very attractive and profitable …

The Recovery Of Methanol From The Mother Liquor Of A Pharmaceutical Active Ingredient, Richard Lawrence Eichholtz

Theses

The company has been sending to the sewer the filtrate from one of our chemical processes. This filtrate contains 63 vol. % methanol. The recovery of this methanol would reduce the amount of purchased methanol. The recovery would also reduce the Biological Oxygen Demand of the plant effluent. In the near future the local sewer authority will be billing the company for BOD.

The goal of the recovery process is to obtain methanol of satisfactory quality for reuse in the process from which it came. A literature search and a laboratory study verified the non-ideality of the system. Preliminary calculations …