Engineering Commons^™

Characterization Of Pulse Duplicator Model For Testing Of Heart Valves, Pankesh Nilkamal Kadam

Theses

The design and development of a pulse duplicator system for testing of prosthetic valves is described. The performance characteristics were evaluated by computing the input impedance of the system from the measured pressure and flow signals for different simulation configurations. The study has been further extended to determine the feasibility of evaluating the cardiovascular status of a patient after major open heart procedure or in state of shock.

Built on hydrodynamic principles, the model allows for a wide range of heart rates, flow rates and mean pressures to be simulated. The artificial circulatory system used as a load to the …

Construction Loan Proposal : A Model For Contractors, Saeed Ahmed

Theses

This thesis is an attempt to outline a construction loan proposal. The purpose is to provide an average contractor with an insight which could help him toward a preparation of a better proposal and better understanding of the subject matter itself.

Feasibility Of State-Of-The-Art Project Planning Techniques In Pakistan, Ahmed Mansoor Ansari

Theses

The objective of this work is two-fold:

1. Technological transfer of the best suitable state of the art techniques for implementation in the construction industry of Pakistan.

2. A vehicle intended for American readers to gain insight of the present methods of working in Pakistan.

In harmony to the first of the forestated ambitions this work covers subjects widely ranging from introducing the concept of proven scheduling techniques as CPM, PERT to the application of these techniques via advanced computer technology.

Frequently, American professionals and consulting firms are invited to participate to administer or design specialist construction projects in Pakistan. …

Study Of Reliability And Failure Mechanism Of Solid Tantalum Capacitor, Rajan N. Bhatt

Theses

Today, reliability is acknowledged as an important item in design and operation of the electronic systems.

This thesis provides some theory, and experiments are instituted to evaluate the reliability of SOLID TANTALUM CAPACITORS made by reputed manufacturers. The experiment was conducted on four batches of tantalum capacitors at different temperatures at different humidity levels. One chapter is on different manufacturing techniques presently applied.

Literature study concentrates on the reliability in solid tantalum capacitors developed between 1961 and 1986.

Several failure mechanism with figure are illustrated to point out how higher reliability of solid tantalum capacitor may be developed.

The bibliography …

Finite Element Stress Analysis Of The Femoral Hip Stem Prosthesis - Bone Interface, Mark C. Buechel

Theses

A three-dimensional finite element model is used to examine the stresses of the femoral hip stem prosthesis and surrounding bone, specifically at the interface between the stem and the bone. Using General Electric's GEOMOD modelling program, 3-dimensional models of the hip stem prosthesis, and both the cortical and cancellous bone, are generated. Due to the complexity of the individual models, General Electric's SUPERTAB modelling program is required to merge the three separate models into one complete model. The model is then broken down into finite elements for analysis. The model assumes isotropic properties to cortical bone and cancellous bone. Several …

Computer-Aided Storm Sewer Design For Apple Macintosh, Andrea Cancalosi

Theses

The design of storm sewer systems because of its repetitive calculations lends itself to the use of computers for time-efficient solutions. The program developed designs storm sewer systems. Runoff is calculated using the Rational method. The rational method yields satisfactory results for relatively small areas and is widely used for stormwater calculations in urban areas.

Before, during or after the calculation process, the input data can be edited using a user-friendly editor incorporated into the program. Input data can be viewed by display on the screen or printed at any time while editing.

From the given input data, the program …

On Longitudinal And Transverse Shear Spring Constants At The Juncture Of Piping-Nozzle, Chihwei David Chen

Theses

This thesis investigates the longitudinal and transverse shear spring constants at the juncture of a radial nozzle and a cylindrical shell.

Due to the difficulty of arriving an analytical solution to these constants, the " ANSYS" program has been employed to calculate them numerically. These results are reported in tabulated forms. Plots for these spring constants K_x, K_z in terms of parameters Beta ( nozzle radius / pipe radius ), Gamma ( pipe radius / shell thickness ) and shell thickness are also presented in this thesis. A numerical example is given to facilitate the design analysis.

Microcomputer-Based Automated System To Monitor Flow And Respiratory Quotient, Chung C. Chien

Theses

An instrument system has been designed to monitor Respiratory Quotient experiments on rats which are living within whole-body calorimeters. By using multiplexing techniques, this system is capable of monitoring Respiratory Quotients in six calorimeters (animal chambers). It exhibits some features that make it more versatile than the previous system. One of the features of this instrument is that it uses a more accurate method of determining rapid changes in gas exchange between subject and environment. The value of this method is its ability to assess the rapid change in metabolic rate which occurs as a result of change in activity, …

Groundwater Contamination Studies At A Sanitary Landfill In New Jersey, Yau-Chorng Chien

Theses

Edgeboro Landfill, a site used for the disposal of municipal and industrial refuse, is one of the largest landfills in New Jersey. The landfill has been in operation since 1954, serving the solid waste disposal needs of local townships and a major portion of Middlessex and the surrounding counties. The landfill was not equipped with a liner and a leachate collection system at the time of start up. The leachate collection line around the landfill, on-site leachate treatment by three stabilization ponds and subsurface cut-off wall were provided to minimize the discharge of leachate into adjacent waters in 1979. Groundwater …

Ksc2408 Digital Filter Evaluation System For The Ecg, Chi-Tong Chung

Theses

A hardware implementation in digital filters by using the high speed and high precision KSC2408 digital filter chips, demonstrates the power of the KSC2408 and proves that the real time digital filters can be implemented without complex circuitry and without high expense.

The system consists of two parts - the digital filter board and the IBM PC; the former handles the data filtering, the latter handles the analog-to-digital data conversion and data display. The KSC2408 is programmed as a 16th order Butterworth digital filter to have flat response in the passband and good attenuation in the stopband.

Recruitment Of Engineers In A Small Company, Robert Cohen

Theses

With most recruitment techniques written for large companies, recruitment of engineers in a small company may be a large problem. A detailed analysis of the engineering employer and employee is constructed making note of large and small company differences. A survey was taken and the results are presented in support of the authors opinions. A generic recruitment technique is also presented, followed by modifications or other considerations to that technique. This should increase the available applicant pool and optimize quality levels of the engineering candidates for the small company.

Management Controls And Modeling With Personal Computers (Pcs) For Material Procurement Within The Department Of Defense (Dod), Stefano Coppola

Theses

As an inevitable fallout of the microcomputer explosion, micro-to-mainframe links have been praised as an effective means of satisfying microcomputer users who insist for more processing power and less dependence on mainframe data processing. Personal Computers used to emulate terminals offer local storage capabilities as well as financial analysis and graphics.

Using a Personal Computer, Lotus 123, and a simulated PC-Link, a management control system was designed to satisfy the Department of Defense Instruction (DODI) 7000.2 for material procurement.

The resulting model provides both the Government and the contractor's management control system with a reliable, timely, and auditable system that …

The Effect Of Platelet Activating Factor On Leukocyte Adhesion To The Post Capillary Walls And Developing Dose Response Relationships, Michael Francis Fitzpatrick

Theses

Blood circulation at the microcirculatory level plays an important role in the inflammatory process. Adhesion and emigration of white blood cells are among the major microcirculatory responses to inflammation. It has been recently suggested that platelet activating factor (PAF) may be a significant mediator in the local inflammatory response. This research was undertaken to characterize and quantitate the effects of PAF on the adhesion of white cells to the wall of postcapillary venules of 7-80um diameter.

The hamster cheek pouch microcirculation was used as a model for microcirculatory dynamics and was prepared for both bright field and fluorescent intravital microscopy. …

Energy Analysis Of A Multistory Office Building Using Bin Method Computer Program, Mohammed Nasim Ghauri

Theses

The consumption of energy by an HVAC system in a high rise office building was investigated by comparing results obtained from ASEAM and Trakload (two microcomputer programs) with the manual calculations and DOE-2 (Department of Energy Program) results obtained by Tishman Research Corporation. The study was performed on the Public Service Building of Newark, New Jersey. It is a 26 story office building, designed to be energy efficient.

The results obtained show that, the energy consumed by the HVAC system is a substantial amount of the total energy used but the controlling factors are electrical lighting and equipment. Both of …

Thermal Desorption Of Hazardous And Toxic Organic Compounds From Soil Matrices, Michael L. Hornsby

Theses

The purpose of this initial laboratory scale research project was to study and demonstrate the feasibility in removal of selected toxic organic compounds from soil by thermal desorption and gas purge. Applying heat and a flow of inert gas to the soil increases the volatilization and effects removal of organic compounds from soil. The work was done in two parts: First, organic solvents were injected into columns containing real and simulated soil matrices. The columns were heated to one of the four temperatures and purged with a flow of nitrogen carrier gas. The organic vapors were deposited as a plug …

A Mathematical Model For The Isometric Contraction Of Smooth Muscle On The Basis Of The Phosphorylated Myosin Regulation Process, Joseph J. Kocinsky

Theses

A mathematical model was proposed for the isometric contraction of smooth muscle (i.e., vascular, urterine, & gastrointestinal) that accounts for the experimental observations on tension transients and pCa²⁺-tension curves. The model is based on the elementary reaction kinetics involved in the process; it uses the Ca²⁺-dependent myosin phosphorylation regulatory mechanism in its interpretation. The model is composed of four parts : (a) the activation of myosin light chain kinase; (b) the phosphorylation of myosin light chains; (c) the actin-myosin Mg²⁺ATPase cross-bridge reaction cycle; and (d) the development of isometric tension. The interaction of the …

Office Automation, Nanda Kishore Krishnaiah

Theses

This thesis gives an overview of the technology available to management for implementing office automation. It explores the methodology for creating an integrated automated office. It discusses methods for linking automated offices through the concept of networking and it addresses the major behavioral aspects associated with the implementation of automation in the office. The most significant part of this thesis is that the conceptual design model is illustrated by the application to an actual case study. The author was involved as a team member in an automation project with the Center for Information Age Technology, at New Jersey Institute of …

Reliability Evaluation Of Liquid Crystal Displays Under Accelerated Life Conditions, Rajkumar Krishnamoorthy

Theses

This Thesis shows method of comparing the reliability of Liquid Crystal Display Devices by means of accelerated life testing at elevated temperature and relative humidity for two different vendors.

The tests were carried out at three different combinations of temperature and humidity.

1. 77°±1° C and no added humidity.

2. 85°±1° C and no added humidity

3. 98°±1° C and 98+2% relative humidity.

Leakage current measurements were carried out after every 1000 hours for up to 5000 hours for vendor no.l. Measurements were carried at 0, 500, 1000, 2000, 3000 and 5000 hours for vendor no.2. A DC bias of …

Image Analyzing Instrumentation System For The Activity Measurement Of Rats, Yun-Kang Li

Theses

A microcomputer based instrumentation system has been developed to measure the activity of rats in 12 metabolic chambers. The instrumentation system monitors the rats' behaviors and estimates their activity continuously in an automatic manner. The activity information of the rats are expressed by a quantitative index which describes the intensity of the activity level.

An Apple II microcomputer system is used to manage the activity measurement which consists of an image recording operation and an image analyzing operation. During the measurement, the microcomputer controls Optic RAM digital cameras to record the rats' image. The camera can take a digital picture …

A Study Of Failure Modes In Rock Resulting From Pile Penetration, Girish Mehta

Theses

The purpose of this thesis was to physically examine the failure mode of a rock mass as a result of pile penetration. In addition, the static bearing capacity of piles bearing in rock was investigated. This was accomplished in the laboratory by performing model tests using a dynamic pile driving device.

Tests were performed using 1 inch nominal diameter model pipe piles and H-piles. Piles were driven into a simulated rock mass consisting of clay-masonry bricks. Following pile driving, the rock mass was carefully dissected and observations of the failure mode were made.

A new technique was developed to preserve …

Mizer : A Ruled Based Cad Tool For Logic Optimization, Sandip Mukerjee

Theses

This objective of this research was to develop a knowledge based CAD tool, to address the problems of Logic Design. MIZER is an expert system, that accepts functional specifications of a logic circuit and connectivity description of its implementation to generate an optimal design. This information is then used to develop a hazard free circuit that brings about an optimization in area and timing. It stores the newly created design into its knowledge base with the approval of the designer, for future use.

Bond Behavior Of Reinforced Concrete Under Impact Loading, Abu Rayhan Md Muniruzzaman

Theses

This thesis covers experimental investigations of bond behavior of reinforced concrete specimen under impact loading. A computer assisted data acquisition system was selected for data acquisition and control. This entire electronic system involved mainly a multichannel digital oscilloscope and an IBM-AT micro computer. All specimens were tested by a modified instrumented Charpy tester assisted by the electronic system.

15 test specimen were prepared in order to perform the experimental investigations. Each 3x3x16 inch specimen was reinforced with a single deformed bar mainly 3/4" and 1/2" diameter and three catagories of concrete mainly plain, 1%, and 2% (by volume) steel fiber …

Hardware Based Data Compression System Using Sliding Dictionary Algorithm, Hemant L. Nerurkar

Theses

Popular data compression schemes found in the literature are software based and present innumerable difficulties in hardware implementation. A data compression scheme, which can be directly implemented in hardware using systolic arrays, has been described. The scheme has a remarkable ability to 'adapt' itself to the changing statistics of the source file. Results generated after a comprehensive study and simulations of the algorithm have been presented. The scheme is inherently suitable for parallel processing. It can be incorporated in transmitting devices since it can be fabricated on a single VLSI chip. Comparison has been made with the LZW scheme. A …

Analysis Of An Inertial Navigation System On A Silicon Wafer, Ashok K. Parida

Theses

This thesis describes a self-contained inertial navigation system for commercial vehicles. It is low cost miniature system employing some of the newest techniques in micromechanical and microelectronic hardware.

The system employes an array of vibrating tuning fork gyros, a number of feedback force-balance accelerometers, and a central processing unit, all fabricated on a silicon wafer using integrated circuit fabrication technology. A miniature platform (size of a golf ball) driven by gearless torque motors is used to provide a quiet environment for the gyros and accelerometers. There are radio links between components that are on and off the platform (eliminating need …

Just-In-Time In The United States : Culture And Competitive Manufacturing, Wolfram Pabst Von Ohain

Theses

Richard Schonberger, 'the' Guru of Just-in-Time' in the United States, wrote in the preface of his 1986 book World Class Manufacturing:

"...Japanese success is rot mature-based. Its basis is a quite different set of concepts, principles, policies, and techniques for managing and operating a manufacturing enterprise. All of it is easy to understand, not hand to accept (once known), eminently teachable and learnable, and not so difficult to apply.

If Just-in-Time is such 'a piece of cake' one would expect that most American companies would practice Just-in-Time. As commonly known, most American companies do not follow the philosophy of Just-in-Time. …

Optimization Of The Design Of The Harrington Distraction Rod And Hooks, Margaret Ann Pisani

Theses

The Harrington Distraction Rod is presently attached to the spines of patients who suffer from scoliosis and vertebral fractures. The rod's purpose is to apply a distractive force to the scoliotic curve in an attempt to reduce its severity. In fractures this rod is implanted to reduce the fracture and increase the stability of the spinal column. Harrington distraction rods are also inserted in order to give mechanical support to the spinal column.

Presently the Harrington Distraction Rod, manufactured by Zimmer, is one—quarter inch in diameter and made of 316L cold—worked stainless steel. The proximal end of the rod consists …

Kinetic Study Of Degradation Of Refractory Organic Chemicals : 2, 4-Dichlorophenol, 2, 4-D And Pyridine; Using Ozone/Hydrogen Peroxide/Uv Radiation, Milind K. Pradhan

Theses

In this study Ozone/Hydrogen Peroxide/UV radiation is used to destroy refractory organic chemicals in aqueous solutions. 2,4-dichlorophenol, 2,4-D and Pyridine are the three chemicals used. Hydrogen Peroxide in combination with UV light proved to be most effective in destroying the parent chemical completely. Ozone and UV system was the next most effective system. UV alone was the least effective.

Kinetic study of the Hydrogen Peroxide and UV system was done using a Chemkin program. The results predicted by the Chemkin program matched closely with the experimental results. More work is currently being done using the Chemkin program to study other …

Finite Element Analysis Of The Temperature Field In The Course Of Laser Heating, Moududur Rahman

Theses

This study is aimed at the developement of a computational procedure for the prediction of temperature and the concentration fields in the course of surface processing by high energy beams. The finite element technique is used for the solution of two dimensional problem of heat conduction in a solid subjected to the laser radiation. The preprocessing, solution and the postprocessing were carried out by the use of ANSYS software package. The laser energy was simulated by heat generation at the shallow subsurface or by the temperature of the impingement zone. Equal square elements were used for computations. It was found …

Flexural Behavior Of Portland Cement Based Composites Subjected To High Strain Rates, Edward Roland

Theses

This investigation studied the modulus of rupture and energy of rupture of mortar, concrete, and steel fiber reinforced mortar at various rates of flexural straining. The strengths of the composites were varied by changing the water cement ratios. Single point flexural loading tests were conducted on 4" x 4" x 20" specimens using a weight dropped from a height of 30" to produce the dynamic loading. Strain rates were varied between 0.1 and 1.9 per second. The inertial effects of acceleration of the specimen were taken into account.

These tests produced data that demonstrated slightly greater ratios of dynamic to …

Sorption Characteristics And Their Effects On Geotechnical Properties Of Illite, Gnanmoorthy Selvakumar

Theses

An experimental investigation of the sorption characteristics of phenol, chlorophenol and chlorobenzene on to illite and of the effect of sorption on the geotechnical properties of illite was performed. Various adsorption isotherms have been considered for the equilibrium adsorption study data. It was found that the Freundlich adsorption isotherm closely fits the experimental results. In addition, the results of desorption study indicated that the sorption process for these systems is not completely reversible.

The index properties of illite were found to be influenced by the sorption of contaminants, i.e., the Atterberg limits of illite increased in accordance with increases in …