Engineering Commons^™

Study Of A Non-Contact Gaging System Of Inspection, Gordhanbhai Ketan Patel

Theses

The quality control function has traditionally been performed using manual inspection methods and statistical sampling procedures. Manual inspection is generally a time - consuming procedure which involves precise, yet monotonous work. It often requires that parts be removed from the vicinity of the production machines to a separate inspection area. This causes delays and often constitutes a bottleneck in the manufacturing schedule.

As a solution to the above problem a Non - Contact Gaging System developed by Optical Gaging Products, Inc., has been used here to study the feasibility of using an automated inspection system and a procedure of developing …

Realization Of High-Speed Carry Propagation For Addition And Multiplication Using The Redundant Binary System On The Mesh And Hypercube Connected Structures, Anil Rana

Theses

The extensive development of large-scale digital computers has naturally been accompanied by a corresponding development of techniques for fast arithmetic operations. Addition is the basis for the majority of the other arithmetic operations and most of the required time is due to carry propagation delay. Various algorithms have been proposed for fast addition and multiplication. The algorithms proposed here use the redundant binary system and are designed for the mesh structure. The algorithms are very efficient for the addition and multiplication of long operands. The algorithms can also be implemented on the hypercube. The n-dimensional hypercube is a highly concurrent …

Software Development For Analysis Of Stochastic Petri Nets Using Transfer Functions, Aman U. Jamwal

Theses

This thesis research is an implementation of a closed-form analytical technique for study, evaluation and analysis of Stochastic Petri Nets (SPN). The technique is based on a theorem that an isomorphism exists between an SPN and a Markov Chain. The procedure comprises five main steps: reachability graph generation of the underlying Petri net, transformation of the reachability graph to a state machine Petri net, calculation of transfer functions, computation of equivalent transfer functions via Mason's rule, and computation of performance parameters of the SPN model from the equivalent transfer functions and their derivatives. The software is developed in UNIX using …

Simulation And Modeling Of Kinetics Of Silicon Oxidation In The Thin Oxide Regime, Tirthankar Dutta

Theses

Thermal oxidation of Silicon in dry O₂, in the thin regime(< 500A) is of vital importance to VLSI device engineers, because thin layers of SiO₂ are exclusively used as gate dielectric for high performance of MOS devices. There exist a number of models to explain the kinetics of oxidation in this thin regime. However there is considerable variance among them and the reported rate constants, which are supposed to describe the oxidation process. Rather than arriving at an alternative model, the present study aims at an extensive study and simulation of existing models of oxidation in dry oxygen, in the thin regime, with a recent set of experimental data and …

Advanced Manufacturing Applications Of Cost Estimating Techniques For Metal Cutting Industries, Zubair Hamid

Theses

In this work, different cost estimating techniques in metal cutting industry were studied. A basic understanding of estimation concepts were given. The typical breakdown of total cost was also given and discussed in details. Practical applications of cost estimating is studied. The effect of different parameters which relate to the lot sizes or quantity were discussed. All these results show that total cost is minimum at a point which is called least cost point, after that cost increases because of the addition of extra resources, in terms of man, machine and increase in administrative expenses.

Biodegradation Of Tnt (2,4,6-Trinitrotoluene), Jin Lou

Theses

This study summaries the results of various methods treating 2,4,6-trinitrotoluene (TNT). Review of available literatures revealed that the most commonly used techniques in full-scale plant for TNT removal are chemical oxidation and carbon adsorption.

From economic point of view, the biological treatment system will be much more cost-effective. Various methods for improving the efficiency of biological system treating TNT wastewater were developed in the laboratory. Current laboratory results show that by isolating appropriate microorganisms under adequate conditions, TNT wastes can be degraded successfully.

At the some time, some pretreatment technologies are recommended in this study for improving the performance of …

Design For Manufacturability (Computer Aided Optimum Gear Design), Narayan R. Mareddy

Theses

Design for manufacturing has design as the first manufacturing step. It is important to recognize the importance of design clubing with manufacturing to reduce the production, set up time. In this thesis concepts of design, manufacturing and four different ways of bringing design and manufacturing together are discussed in detail.

As there are large number of variables in the gear rating equations, it is very difficult to achieve optimum design by manual methods unless an extensive trial and error process is carried out. An algorithm has been developed which allows rapid convergence to the optimum gear design. The algorithm has …

A Color Petri Net Simulation Tool, Sanjaykumar V. Desai

Theses

A user friendly, modular and highly interactive graphical tool for drawing, editing and simulating color Petri nets is developed. The tool is designed to model concurrent and interlocked systems, such as flexible manufacturing systems, communication protocols and computer systems. A Color Petri Net(CPN) has a more concise graphical system representation than a standard Petri net, because net entities in CPN carry information. The CPNS(Color Petri Net Simulation) tool simulates a net having conflicts, reveals deadlocks, and creates a log file with the state history of the system yielding performance measures.

Direct Recovering Of Surface Structure Characterized By An Nth Degree Polynomial Equation Using The Uoff Approach, Mazen A. Salhi

Theses

There are two different approaches for estimation of structure and/or motion of objects in the computer vision community today. One is the feature correspondence method, and the other is the optical flow method [1]. There are many difficulties and limitations encountered with the feature correspondence method, while the optical flow method is more feasible, but requires a substantial amount of extra calculations if the optical flow is to be computed as an intermediate step.

Direct methods have been developed [2-4], that use the optical flow approach, but avoid computing the full optical flow field as an intermediate step for recovering …

Canmol : Expert System In Medicine, Kulin Hemani

Theses

The intriguing words for the nineteen nineties are "Expert Systems", and "Artificial Intelligence". To a layman these terms conjure up thoughts of spaceships and futuristic beings. In reality they exemplify man's capability to harness technology.

Expert systems are computer software programs that make use of previously accumulated knowledge to assist in solving complex problems.

In recent years the practice of medicine has changed dramatically from a fundamentally individually deductive approach to an Artificial Intelligence based science. The modern physician no longer draws conclusions simply by examining the patient. Today the physician employs sophisticated computer based diagnostic tools to generate a …

Delay Performance Of Cebus And Modified Cebus Schemes, Altaf Hussain

Theses

In this thesis the performance of the CEBUS (Consumer Electronics Bus), a local area network proposed by the Electronics Industries Association for the 'Smart House,' is analyzed under varying network load and traffic patterns that would occur in a typical home environment. Reduced complexity versions of the CEBUS scheme are compared with the standard CEBUS scheme.

It was found from simulation analysis that the delay in the CEBUS network, at a given network bandwidth, is dependent upon the message priority and the traffic pattern in the network. It was also observed that the performance of a modified CEBUS scheme was …

Automation Of Part Inspection In A Coordinate Measuring Machine, Madhu N. Kanoor

Theses

Some of the drawbacks in inspecting a part using a Direct Computer Controlled Coordinate Measuring Machine are that a programmer has to generate a part program for the inspection process, and such programs have to be generated for each part to be inspected. These programs will be restricted to a kind of CMM, thus preventing the portability of the program t o other kinds of CMM.

If a part program can be generated off line after a part has been designed in a CAD system. an operator can inspect the part without any prior knowledge of the esoteric CMM programming …

Design Optimization Of Laminated Fiber Composites, Ramarao G. Prasad

Theses

Laminated Fiber Composites are finding a wide range of applications in structural design especially for light weight structures that have stringent stiffness and strength requirements Finding an efficient composite structural design that meets the requirements of a certain application can be achieved not only by sizing the cross-sectional areas and member thicknesses but also by global or local tailoring of the material properties through selective use of orientation, number and stacking sequence of the laminae that make up the composite laminate.

The work presented here treats the design optimization problem involving minimum weight design of fiber composite laminates subject to …

Development Of Technology For Glass Shaping By The Use Of Abrasive Water-Jet, Li-Yuan Shih

Theses

This study is to investigate the effects of AWJ properties on the results of glass machining and to develop a practical procedure for prediction of these results of abrasive waterjet (AWJ) machining. The use of glass in engineering and Abrasive Waterjet Cutting Technology are introduced. A practical technique to prevent defects and to improve the quality of the glass surface is suggested. A earlier parameter introduced, Exergy Distribution Density (EDD), is used in order to characterize the cutting conditions.

It was found that besides of EDD the results of machining are affected by the particles' destruction in the course of …

Broadband Isdn Control Using Neural Networks, Stavros Zervoudakis

Theses

Broadband Integrated Services Digital Networks (B-ISDN) are considered to become the standard communications networks in the near future. Major research efford is being applied in determining the appropriate mode of operation for B-ISDN systems. Two proposals, the Synchronous Transfer Mode (STM) and the Asynchronous Transfer Mode (ATM) claim to best fit the B-ISDN transmission requirements individually. A new method for B-ISDN traffic control is proposed in this paper. This method assigns priority levels to incoming traffic while integrating STM with ATM. A neural network is used to decide how the multiplexing of the incoming packets will be performed. Several traffic …

Disc Size Scale-Up In Rotating Biological Contactor System, Chi-Sheng Chang

Theses

Disc size scale-up of prototype and small-scale RBC plants are successfully developed by applying the 114 data sets obtained from 12 RBC plants to the evaluation of percent sBOD remaining. These data analyses are performed by the least square method, therefore, the scale-up factors of the prototype and the small-scale are determined at different hydraulic loading. Furthermore, the relationship between scale-up factor and the disc diameter are established under the given flow rate, the number of stages, and the number of discs. A group of Curves are obtained and can be utilized for the full-scale RBC plant preliminary design. The …

Calcium Channel Dynamics In Hippocampal Neurons : Simulation And Physiological Studies, Prasad D. Jasthi

Theses

Mathematical modelling and computer simulations of neurons was presented by various researchers in the past. Computer simulations provide a time efficient and cost effective method to obtain required information about the physiological system. The objective of this project is to study the kinetics of calcium channels in hippocampal neurons. In an attempt to study the calcium channel activity we have developed a mathematical model for the CA3 region of the hippocampus and have analysed the calcium current noise obtained from the physiological recordings. The Simulation results had reproduced the action potential and activities of sodium and potassium channels, but did …

Biodegradation Of Phenol And 4-Chlorophenol Using A Single Species In A Sequencing Batch Reactor, Kung-Wei Wang

Theses

Biodegradation of phenol and 4-chlorophenol (4CP) using Pseudomonas putida (ATCC 17514) was studied in batch and sequencing batch reactors. Batch experiments were first performed in order to reveal the kinetics of biodegradation for each substrate. 4-Chlorophenol was degradable only in the presence of phenol, or immediately after exposure of the organism to phenol. It was postulated that an enzyme induced by the presence of phenol was necessary to initiate degradation of 4-chlorophenol.

A mathematical model was then developed to describe the dynamic behavior of both substrates in a sequencing batch reactor (SBR). The model utilized rate parameters obtained from batch …

Radiation From The Cylindrical Dielectric Taper, Tor-Odd Hoydal

Theses

The radiation problem of the cylindrical dielectric taper, excited by the HE₁₁ dominant mode, is studied. A theoretical model and a numerical investigation into the radiation characteristics of such a tapered structure are presented. The model is based upon the combination of the exact modal field solutions for a step profile cylindrical dielectric waveguide, Local Mode Theory, and the Equivalence Principle for the determination of equivalent current densities.

The far-zone radiation field is considered to be the summation of the fields produced by two radiative components in the dielectric rod/conical structure: The "aperture" of the uniform dielectric rod at …

Stability Of Hot Mix Asphalt With Petroleum Contaminated Soils, De-Rong Lobo Huang

Theses

One of the most effective ways of reducing petroleum contaminated soil is to use it in the production of hot mix asphalt. Both asphalt cement and petroleum contaminates have similar chemical properties. Therefore, The contaminates will be locked within the asphalt matrix without potential leaching.

The six different petroleum contaminate soil samples from New Jersey were used in this research. Since those samples have different physical properties (such as moisture content, specific gravity, plastic limit, liquid limit, grain size distribution) and chemical properties( such as concentration of the contaminate, and type of contaminates) the maximum amount of petroleum contaminated soil …

Deconvolution Applications In Arterial Dynamics, Shanthi Ganesan

Theses

This thesis deals with the computation of the Arterial Impulse Response Function by deconvolving aortic pressure and flow signals in time domain. Several methods have been developed in the past to obtain a solution for the convolution integral. These are (1) Transform method, and (2) Numerical Approximation methods : a. Conventional method b. Relaxation methods.

These methods have been applied in the past to the RC network model and it was found to work well. In this thesis, the methods are applied to data from more realistic models and also on data obtained from dogs. The model considered is a …

Bio-Mechanics Of The Hip Joint And The Engineering Considerations In The Treatment Of Unstable Intertrochanteric Fractures, Manoj D. Nene

Theses

Numerous previous attempts have been made to determine the magnitude and the direction of forces acting on the hip joint. The mechanism of femoral neck fractures and the frequently occurring failure of its internal fixation has led engineers to analyze the forces involved. An unstable intertrochanteric fracture is one which lacks continuity of the bone cortex on the opposing surfaces of the proximal and digital fragments. A mathematical model is created in this study to examine the 135° and 150° nail plate. The results give an approximate estimation of stresses on the two plates. A 3D finite element model of …

Knowledge Based Designing Of Broadband Coaxial Cable Networks, Tauqir Hameed

Theses

The objective of this research was to build a broadband coaxial cable network. One of the basic requirement of a network is the physical link transmission medium. For the purposes of this research, broadband coaxial cable was chosen as a physical medium of data communication. The approach taken in this research was to divide network design into three main steps. In the first step, the decision on topology of the network was determined. Both Star and Minimum Spanning Tree topologies were used and then the Esau-Williams Algorithm was employed to minimize the cable length. In the second step, various signal …

Performance Of The Extended Token Bus Network With Asymmetric Load Distribution, Hong Lin

Theses

The Token Bus, IEEE 802.4, provides high priority message options. The delay of high priority messages becomes an important criterion in the design and management of computer communication networks. A goal of the protocol is to allocate sufficient bandwidth and frequency of access to minimize of the high priority message delay. In this study, a simulation model of a priority based network, consisting of two token bus networks interconnected by a bridge is implemented. The load distribution among stations is asymmetric and the messages are divided into two priorities, high and low. Both fixed and variable token token holding times …

The Performance Evaluation Of A New Neural Network Based Traffic Management Scheme For A Satellite Communication Network, Dequan Liu

Theses

The thesis describes a new neural network based traffic management scheme for a satellite communication network. The scheme consists of two levels of management. The front end of the scheme is a derivation of the Kohonen's self-organization model to configure maps for the satellite communication network dynamically, The model consists of three stages. The first stage is the pattern recognition task which selects an exemplar map that best meets the current network requirements. The second stage analyzes the discrepancy between the chosen exemplar map and the state of the network, and adaptively modifying the chosen exemplar map to conform closely …

Implementation Of An Integrated High Energy Beam Workcell, Varadaraj Souda

Theses

This study is an effort to advance the technology of machining by High energy beams. Investigation of the Waterjet, Plasma and the Oxyfuel beams was carried out to explore novel machining techniques. The study was focussed on three major objectives.

One of the major objectives was to set up an Integrated beam workcell consisting of the three beams. A hydroabrasive waterjet workcell was modified to install the three cutting tools to be along the same line of traverse. An integrated beam consisting of the thermal and the waterjet beams was produced because of this arrangement. The feasibility of using the …

A Biomechanical Analysis Of Three Humeral Fracture Fixation Systems, Alina Michelle Waite

Theses

Often, humeral fractures requiring internal fixation can be a challenging orthopaedic procedure. Each method of treatment possesses clinical and biomechanical advantages and disadvantages. Rigid plate fixation is highly successful in treating a large variety of long bone fractures. Nevertheless, excessive soft tissue dissection is necessary, and vascular and neural anatomy of the humerus can make plate application and removal difficult. An intramedullary nail offers a relatively simple procedure, thereby reducing these anatomical concerns. However, rotational instability at the fracture site is a common complication with a conventional intramedullary nail. Thus, a study was conducted to evaluate a new interlocking intramedullary …

An Approach To Improving The Antithrombogenesis Of Pneumatic Diaphragm Artificial Ventricle : Fabrication And Design Considerations, Hui-Sun Wang

Theses

Thrombus formation is one of the major problems in artificial heart development and its clinical applications. In order to improve the antithrombogenesis in the artificial ventricles, three aspects of investigation have been done in the laboratory.

1] the surface features and the surface defects on specially prepared samples made of polyurethane and silicon rubber were studied and analyzed by scanning electron microscopy ( SEM ), light microscopy and KEVEX Feature Analysis for understanding and controlling the blood contacting surface.

2] the polyurethane blood contacting surface with smooth surface fabricated by solution cast process, the material treatment, and the fabrication procedure …

Graded Buried Channel Charge Coupled Device Design, Zengjing Wu

Theses

A process and device simulation study has been made to optimize a new type of buried channel CCD (BCCD) structure to be referred to as Graded BCCD (GBCCD) whose buried channel is formed by multiple implantations for achieving higher charge transfer efficiency. The 2-D process simulation tool SUPREM4 and 2-D device simulation tool PISCES2 were used in this research. The simulation results of the GBCCD with double channel implants are compared with the previously obtained experimental results.

Triple channel implants under the conditions of various process parameters were also simulated and the optimized case was chosen on the base of …

Mobile Manipulator Path Planning By A Genetic Algorithm, Min Zhao

Theses

The thesis addresses the path planning problem for a mobile manipulator system which is used to perform a sequence of tasks specified by locations and minimum oriented force capabilities. The problem is to find an optimal sequence of base positions and manipulator configurations for performing a sequence of tasks given a series of task specifications. The formulation of the problem is nonlinear. The feasible regions for the problem are nonconvex and unconnected. Genetic algorithms applied to such problems appear to be very promising while traditional optimization methods cause difficulties. Computer simulation is carried out on a three degrees-of-freedom manipulator mounted …