Engineering Commons^™

Desalination Waste Revitalization Using Carbon Capture: Process Optimization Using Machine Learning, Ahmed Mohamed Elsayed

Theses

Over the next five to ten years, desalination will play an ever-important role in our society. Developing nations will look at desalination from the point of water scarcity, while developed nations will consider the perspective of the Water-Energy-Food nexus. With current technology, for every liter of freshwater produced, one and a half liters is thrown away as waste. This body of research proposes to employ chemical precipitation in ammoniated brine solutions, that have reasonably high ionic concentrations. CO2 absorption in Bubble Column Reactors can reduce sodium ions by precipitating NaHCO3. Also, the absorbed CO2 can reduce chloride ions and induce …

Possible Storage Of Co₂ In Saline Aquifer: Storage Factor Estimation, Sarah Abdul Aziz Al-Tamimi

Theses

The objective of this study is to perform laboratory measurements and a CO₂ underground storage study to cover the knowledge gap on CO₂-Brine relative permeability and assess various variables on the storage of CO₂ in a selected aquifer. Several factors that affect CO₂ storage have been discussed in the literature. These include both macroscopic and microscopic displacement efficiency of brine as a function of CO₂ pore volume injected. It is clear from the literature that there is still more work needed to investigate the effect of various variables such as formation temperature, brine viscosity, and the possible presence of free …

Intelligent Toolpath Sequence Optimization Approach For Infinite Production Lines, Thanveer Ahammed

Theses

This thesis is concerned with developing a new mathematical model and software for finding the optimal toolpath for an infinite machine production line system. Existing total production time estimation for the Computer Numerical Control (CNC) machining method is solved either on a single machine or in a single operation. The combination of airtime and tool switching time consumes most of the total production time, requiring multiple operations and multiple machine production line systems. A hybrid GA technique along with a modified TSP algorithm was used to find the minimal nonproductive time in these systems. This proposed mathematical model is coded …

Performance Assessment Of Existing Rc Bridges Equipped With Seismic Risk Mitigation Systems, Homam Mohamad Ghazal

Theses

Many bridges built before adopting current design standards may be at risk as they do not meet the latest seismic performance objectives. Bridges are vital infrastructure components required to be serviceable after earthquakes to avoid negative consequences on daily traffic. Previous seismic hazard studies considered the United Arab Emirates an earthquake-prone region subjected to two scenarios: (i) near-field events, and (ii) far-field earthquakes. Therefore, the vulnerability of pre-seismic code bridges in the UAE should be carefully assessed, and retrofit techniques should be proposed to mitigate possible earthquake losses. This study is thus devoted to assessing the seismic vulnerability of a …

Design And Implementation Of Photovoltaic Energy Harvesting Automaton, Iskandar Askarov

Theses

Global domestic electricity consumption has been rapidly increasing in the past three decades. In fact, from 1990 to 2020, consumption has more than doubled from 10,120 TWh to 23,177 TWh [1]. Moreover, consumers have been turning more towards clean, renewable energy sources such as Photovoltaic. According to International Energy Agency, global Solar power generation alone in 2019 has reached almost 3% [4] of the electricity supply. Even though the efficiency of photovoltaic panels has been growing, presently, the highest efficiency solar panels available to an average consumer range only from 20%-22% [14]. Many research papers have been published to increase …

Model-Based Cognitive Communications For Low-Power Wireless Networks, Indika Sanjeewa Abeywickrama Dhanapala

Theses

Our world is increasingly being instrumented with low-power wireless networks that deliver data for diverse application domains such as energy management, health and well-being, security, and other Internet of Things services. As these wireless networks operate in the unlicensed radio spectrum while co-existing with various other communication networks, their communication reliability and energy efficiency are affected by the radio environment. Because of this vulnerability to radio interference, low-power wireless networks may be unable to deliver their application requirements and be inefficiently consuming energy, functioning as a low-dependability network. The situation is exacerbated in indoor environments such as office and residential …

Sediment Transport On The River Bandon, Co. Cork, Ireland, Laurence Lomasney

Theses

This thesis analyses sediment transport on the River Bandon, Co. Cork, Ireland. Bedload transport and suspended sediment transport were monitored on the River Bandon over an extended period to determine rates of transport over varying flow conditions. A literature review of sediment properties (individual and bulk sediment), sediment transport, and numerical modelling was undertaken. A manual field sampling programme was undertaken at different locations on the River Bandon to collect bed sediment and suspended sediment for laboratory testing. This data, and data collected using an automatic water sampler and bed sediment traps also, was used to determine baseline conditions for …

Robust Control Strategies For Optimal Operation Of Distributed Generation In Smart Microgrids, Chi-Thang Phan-Tan

Theses

The high penetration of PV systems and fast communications networks increase the potential for PV inverters to support the stability and performance of smart grids and microgrids. PV inverters in the distribution network can work cooperatively and follow centralized and decentralized control commands to optimize energy production while meeting grid code requirements. However, there are older autonomous inverters that have already been installed and will operate in the same network as smart controllable ones. This research proposes a decentralized optimal control (DOC) that performs multi-objective optimization for a group of PV inverters in a network of existing residential loads and …

Itraconazole Nanocomposites Prepared Via Rotary Evaporator Drying Of Nanomilled Suspensions, Alexander Santos Coelho

Theses

The aim of this study is to explore the feasibility of rotary evaporation for drying wetmilled drug suspensions as a novel approach to produce drug nanocomposites that exhibit fast redispersion and immediate drug release. To this end, the physical stability of the nanomilled itraconazole (drug) suspensions, a.k.a., nanosuspensions, during the milling and storage; the drying of the itraconazole nanosuspensions via the rotary evaporator; and the type/loading of various polymers/surfactants (dispersants) on aqueous redispersion and drug release from the nanocomposites were examined. Our results suggest that smaller drug particle size, owing to nanomilling, and smaller nanocomposite particle size, owing to optimized …

Flexible Microfluidic Device With Nonplanar Interdigitated Microelectrodes, Saud Alssaidy

Theses

The lab-on-a-chip concept has improved significantly in recent years to meet global demand for various applications with the advent of new technologies. Much progress has been achieved, but many microfluidic devices still suffer from design limitations in terms of sensitivity and selectivity because they use rigid, fragile substrate materials and conventional electrodes, which do not provide high sensitivity or selectivity and suffer from signal-to-noise ratio issues. This work proposes a novel device architecture that uses flexible, transparent top and bottom layers integrated with (nonplanar interdigitated microelectrodes) to create a sandwich-like flexible substrate base. The top and bottom layers consist of …

Towards Automation Of Aluminum Cell Ramming Process, Maryam Salem Abdelfattah Mohamed Alkaabi

Theses

Newly installed cathode blocks in an aluminium reduction cell, expand due to a rapid increase of temperature when passing a high current at the start-up of the cell. High thermal stresses may result if cathode blocks are lined without gaps, and this can lead to cracking of the cathodes and failure of the cell. On the other hand, leaving gaps would cause failure due to molten metal infiltration in the gaps. To overcome these problems carbon-based ramming material is used to fill these gaps. Currently ‘Filling’ is carried out manually or partially automated, but this needs to be fully automated …

Immobilized Lipase On Zif For Enhanced Biofuel Production, Reem Mohammed Al Mansouri

Theses

Enzymatic transesterification of triglycerides to produce biodiesel has been gaining increasing attention owing to its advantages over chemical processes. Being catalysts, enzymes are not consumed during the processes in which they are used. Therefore, a successful technique to allow their repeated use can significantly enhance the economic feasibility of the process. The most common approach to allow easy separation of the enzymes and to eliminate their wastage is immobilization on a support matrix. Recently, Metal-Organic Frameworks (MOFs) have been suggested as preferable support for enzyme immobilization, owing to their high-order structure and high porosity and specific surface area. This thesis …

The Impact Of Wastewater Chemistry And Flow Characteristics On Hydrogen Sulfide Concentration, Mohsina Muhammed Sherief

Theses

Hydrogen sulfide (H₂S) is a naturally occurring, highly toxic gas that is formed from the decomposition of sulfur compounds. At low concentrations, H₂S is an irritant for the eyes, respiratory and gastrointestinal tract. At higher H₂S concentrations, it produces neurological impairment with dizziness, headache, and loss of consciousness. Mortality was reported to reach 6 percent following exposure to elevated concentrations. H₂S is generated in different industrial processes. In wastewater collection and treatment plants, H₂S is a common source of concrete and metal corrosion that has resulted in huge economic loss. …

Minimization Of The Weld Distortion By Weld Sequence Optimization Using Artificial Intelligence, Jeyaganesh Devaraj

Theses

The application of dissimilar metal welding processes is increasing nowadays in the automobile, aerospace, marine industry as they not only serve for joint welding for different metals but also assist in repairing and reworking in a simplified manner. Study on optimization of weld parameter to weld a structure is important to have control over the distortion, mass deposition, tensile strength, etc. The present research reports the development and implementation of the Genetic algorithm integrated Artificial Neural Network (GANN) based weld sequence optimization for reducing deformation of dissimilar metal joining using the hot-encode technique. Gas Metal Arc Welding (GMAW) is used …

Split-Horizon Dual-Stage Dispatch Scheme For A Standalone Microgrid, Aslam Amir

Theses

The advent of microgrids has prompted plenty of studies into its design, control, protection, and implementation, with several operational as well as pilot systems being commissioned worldwide. This necessitates the development of hardware and software for the Energy Management System, the supervisory controller in a microgrid. Hence, this thesis provides a novel dual-stage dispatch scheme for the Energy Management System of a Standalone microgrid by “splitting” the dispatch time horizon into four equal quarters to facilitate better usage of power forecast accuracies. The two stages include Unit Commitment/Scheduling and Economic Dispatch for the dispatchable Distributed Energy Resources based on renewable …

Strengthening Of Concrete Deep Beams Using Carbon Fabric Reinforced Cementitious/Geopolymeric Matrix, Nour Mohamed Muhsen Khir Allah

Theses

This research aimed to examine the effectiveness of using carbon fabric-reinforced matrix (C-FRM) composites to improve the shear response of reinforced concrete (RC) deep beams. Ten RC deep beams with a/h of 1.6 were tested, where a is the shear span and his is the beam depth. Test parameters included the presence of internal shear reinforcement (no shear reinforcement and minimum shear reinforcement), number of C-FRM composite layers (one and two layers), angle of inclination of the second layer of CFRM (90o and 0o with respect to the longitudinal direction of the beam), and type of matrix (cementitious and geopolymer). …

Flutter Suppression By Active Controller Of A Two-Dimensional Wing With A Flap, Abdallah Muhammed Tarabulsi

Theses

Flutter is a divergent oscillation of an aeroelastic structure, and one of a family of aeroelastic instability phenomena, that results from the interaction of elastic and inertial forces of the structure with the surrounding aerodynamic forces. Airfoil Flutter is important due to its catastrophic effect on the durability and operational safety of the structure. Traditionally, flutter is prevented within an aircraft's flight envelope using passive approaches such as optimizing stiffness distribution, mass balancing, or modifying geometry during the design phase. Although these methods are effective but they led to heavier airfoil designs. On the other hand, active control methods allow …

Material Characterization For Microwave Absorbing And Shielding Applications, Muhammed Shafeeque Kallumottakkal

Theses

The rapid advancement and widespread of microwave and RF-communication systems have contributed to an abundant rise in electromagnetic energy radiation in our living environment. Such an increase in microwave sources is due to the development and advancement in communication techniques (mobile phones, laptops, and antennas for aeronautics or automobile) and electronic warfare in the military field (radar and satellite). To address these concerns, EM absorbing materials are used to ensure public safety and the safety of military operations. Various types of EM absorbing materials made up of composite materials have been produced and studied. This thesis discusses the microwave properties …

Biosensor Devices Based On Graphene And 2d Materials, Suhada Aidrous Poovathy

Theses

Nanomaterials offered new improvements and developments to the bio-sensing field due to their unique physical and chemical properties. Unique and exceptional electronic properties, such as the ultrahigh surface-to-volume ratio and the excellent electrical properties of the 2D materials like in graphene, making these materials promising for future smaller and faster electronics, but an extensive amount of research is still needed. This thesis is concerned with the study of the integration of 2D material graphene in the development of sensitive and rapid biosensors. The main objective of this thesis is to understand the features and characteristics of graphene, evaluate the scope …

Immobilization Of Lipase On Metal Organic Frameworks For Biodiesel Production, Reem L Husam Safwan Shoma

Theses

For the economical application of enzymatic processes in biodiesel production, lipase enzyme has to be used in immobilized form to allow easy retention and reuse. The main challenges facing the industrialization of the enzymatic process are the high mass transfer resistance, the tendency to adsorb the by-product glycerol onto the support matrix and poor operational stability. These problems can be solved by a good selection of supports of favourable surface characteristics and pore sizes. In that regard, increasing interest has recently been in Metal-Organic Frameworks (MOFs) as a new kind of porous support for enzyme immobilization. Physical adsorption, which is …

Environmental Assessment Of The Impact Of Land-Based Discharges On Marine Water And Sediment Quality In Dubai, Uae, Ayman Fathy Halawa

Theses

The current seawater and Creek – Canal waterway in the Emirate of Dubai, UAE, is under tremendous pressure because of continuous urban water discharges from land-based sources. Therefore, the impact of urban water discharges on marine water and sediment quality in the Emirate requires a thorough assessment. The main objective of this study is to assess the impacts of effluent discharges on the quality of water and sediment in the open sea and Dubai Creek. The land-based sources include the power and desalination plants, industrial sector, sewage treatment plant, and stormwater runoff. To achieve the stated objective, relevant data on …

Drug Releasing Hydrogels For Opioid Use Disorder, Kaytlyn M. Crowe

Theses

Ease of access to prescription opioids and the strength of synthetic opioids have contributed to the rise in over use disorders, overdose, and death rates during the opioid epidemic. The current overdose standard of care, rescue NLX (NLX), is a competitive antagonist to the μ-opioid receptor but has a relatively short period of action compared to opioid agonists, especially synthetic agonists. Rises in the abuse of these synthetic and semi-synthetic agents in recent years have shown the weaknesses of rescue NLX, as it can leave overdose patients vulnerable to renarcotization and precipitated withdrawal. To prevent both from occurring, we developed …

Assimilating Requirements Specification For Space Manned Missions: A Novel Approach, Khalfan Mohamed Al Remeithi

Theses

Aligned with the UAE Space Strategy 2117, which aims to establish the first inhabitable human on the Martian Surface by 2117, and with the current enthuse toward space tourism, the thesis proposes a novel framework to assimilate the process of requirement specification for a Manned Mission to Mars surface. Deep Space manned missions are unique and characterized by a set of specific requirements that should be elicited from different sources and stakeholders to ensure the missions’ success. In addition, these missions are highly dependent on the software components in the Command and Data Handling System (CDHS), which is used to …

Heat Transfer Intensification In Microchannel Heat Sinks (Mchs) - Wavy Channels Embedded With Pin Fins, Anas Mohammad Amin Alkhazaleh

Theses

This work conceptualizes heat sinks for electronics employing wavy/sinusoidal microchannels embedded with pin fins and subsequently analyzes their performance in terms of thermal resistance, pressure drop, maximum chip temperature, and the associated pumping power due to the pressure drop. The conceptualized wavy Microchannel Heat Sink (MCHS) is mathematically modeled using a combination of governing equations including energy equations, continuity equations, and Navier- Stokes equations. The performance of the wavy microchannel heat sink embedded with pin fins is evaluated based on a parametric study covering multiple parameters; microchannel’s amplitude, frequency, hydraulic diameter, pin fins’ diameter, and location, and Reynolds number. The …

Study Of Electrodeposition Of Copper-Indium Material For Fabrication Of Cis Thin-Film Solar Cells, Leher Farooq

Theses

Abstract

Copper-Indium material for the fabrication of CIS/CIGS thin-film solar cells and for applications as an alloy is one of the most auspicious materials currently being studied and has attracted significant interest in solar energy and other industries. In the past, there have been several methods used for the fabrication of chalcopyrite thin-film solar cells. However, one of the best methods in the industry is electrodeposition, which employs the principles of electrochemistry to deposit materials on a working electrode. The cyclic voltammetry and constant potential deposition studies have been conducted for the electrodeposited copper indium material. In order to better …

Comprehensive Characterization Of The Aerosol And Cloud Condensation Nuclei In The Uae, Farah Hassan Abdi

Theses

Cloud seeding has emerged as a significant alternative freshwater source in the United Arab Emirates (UAE). It is employed to manipulate weather conditions and increase precipitation in specific target regions. These efforts aim to densify clouds and enhance the likelihood of rainfall by inducing nucleation. This technique involves an operational crew aboard an aircraft that disperses substantial quantities of seeding particles, such as salts or silver iodide, into suitable clouds. These particles can serve as cloud condensation nuclei (CCN) and indirectly affect the rate of rainfall. In 2018, cloud seeding operations were responsible for approximately 10-15% of the UAE's total …

Extraction And Bioactivity Evaluation Of Antioxidant Components From Teucrium Stocksianum Bioss Collected From Uae, Ahmad Ayman Al Salloum

Theses

Recently, the industry of Natural Bioactive Compounds (NBAC) is expanding dramatically due to its high medical potentials. High bioactivity of natural extracts from a wide range of plants is evident from the reported literature. For instance, NBACs show antibacterial, antifungal, antimicrobial, anti-inflammatory, anticancer and antioxidant activities. Teucrium stocksianum Boiss. from the Lamiaceae family is a known herb in the traditional medicine in United Arab Emirates. Multiple bioactivities of T. stocksianum were recorded such as anti-inflammation, analgesia, antioxidation, anticancer, antinociception and antimicrobial bioactivity. In this thesis, the extraction of NBACs from T. stocksianum was studied with Microwave-assisted extraction using Deep eutectic …

Real Time Analysis Of Eye Movements Using Computer Aided Software, Farhan Ahmad

Theses

Eye movement analysis is a slow and tasking job that require a trained vision analyst to sift through hundreds of eye movements. The difficulty of the task increases when a subject has undiagnosed eye related disorders. One such disorder is Convergence insufficiency (CI) which affects nearly 12 million people in the US. Convergence insufficiency occurs when the eyes are unable to coordinate simultaneous inward movement for near focal tracking. Individuals with CI are unable to coordinate eye movements this can result in many symptoms such as double vision, blurred vision, headaches, vision strain, and fatigue. A diagnosis for CI relies …

Iii-Nitride Ultraviolet Light-Emitting Diodes: Approaches For The Enhanced Efficiency, Moulik Patel

Theses

III-nitride ultraviolet (UV) light-emitting diodes (LEDs) offer marvelous potential for a wide range of applications, including air/water purification, surface disinfection, biochemical sensing, cancer cell elimination, and many more. III-nitride semiconductor alloys, especially AlGaN and AlInN, have drawn significant attention due to their significant advantages that include environmental-friendly material composition, compact in size, longer lifetime, low power consumption, and tunable optical emission. However, the performance of III-nitride UV LEDs in terms of efficiency and output power is still deficient. The presence of high defects and dislocations due to lattice-mismatched epilayers, polarization induced quantum-confined Stark effect, electron overflow with low hole injection …

The Effects Of Design Parameters On The Neural Recordings With Micro-Ecog Arrays, Manan Amish Sethia

Theses

In the field of neural prosthetics, electro-cortico-graph (ECoG) arrays are commonly used to record neural activity of the brain cortex both in animal and human subjects. A finite element model (FEM) was developed to simulate the electric field generated by a single neuron in the rat brain cortex and a micro ECoG array (µECoG) placed on the pia surface for recording the neural signal. The neuron was simulated as a dipole current source with a magnitude of 1µA and placed at three different depths in the motor cortex corresponding to different layers under the µECoG array. The array design was …