Engineering Commons^™

Recycling Of Cured Carbon Fiber/Epoxy Resin Laminated Composites Scraps: Processing And Characterization, Khaled Mohammed Al Harmoodi

Theses

The concept of reinforced composites came decades ago from the need to fabricate high-strength, heat-resistant, wear-resistant, and low-density materials. The polymer matrix composites offer a wide range of applications due to the collaborative nature of the functional fillers and polymers present. Towards the twenty-first century, the aviation industry flourished due to flying being the preferred way of travel across states and countries. With such a massive demand for air transport, there is an equally parallel demand for the production of aircraft components. This study aims to reuse the waste of uncured composite prepreg scraps from the ply-cutting manufacturing process in …

Piezoelectric Enhanced Noninvasive Laser-Based Detection Of Multiple Vital Signs, Ahmed Saeed Dabi

Theses

In this study, a method for concurrent measurement of heart rate (HR) respiration rate (RR) and blood pressure (BP) using movements of the chest wall is proposed. Unlike conventional approaches that use only laser, in this approach a laser source is used to collect the piezoelectric sensor output without the need for probing. The chest wall movements are transduced using an optical ODSL 8 sensor and a piezoelectric taped to the patient’s chest. Measurement data is used for development of algorithms for estimation of HR, RR and BP. Next measurements are taken while the subjects are breathing and holding their …

Utilizing Date Pits In Microencapsulation: Effect Of Different Variations On Probiotic Survivability Under In Vitro Digestion, Asmaa Samir Al Hamayda

Theses

This work deals with the medicinal use of date pit powder, which turns it from a waste product to a useful stabilizer for the release of beneficial probiotics in the human intestine. The main objective of this work is to encapsulate probiotics with date pit beads and their subsequent release in the human intestine. The beads were formed using gravitational dripping technique, while INFOGEST protocol was used to test the digested beads and the release of viable probiotic cells. For the three date varieties Raziz, Naghal and Khadrawy, it was found that 0.1 g of date pit powder per 0.2 …

The Design Of A Point Of Care Fet Biosensor To Detect And Screen Covid-19, Nisreen Amer Mohammad Alnaji

Theses

This work proposes and demonstrates a biosensor with reduced Graphene Oxide (rGO) based Field Effect Transistor (FET) for rapid and selective detection of Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2). The main objective of this thesis is to detect the SARS-CoV-2 spike protein antigen on spot selectively and rapidly. The rGO channel is coated with the spike protein antibodies to achieve selectivity. Moreover, the biosensing performance and specificity are governed by decorating the sensor’s channel with Metal Nanoparticles (MNPs) such as, copper, and silver. The designed sensor successfully detects the SARS-CoV-2 spike protein and shows singular electrical behavior for detection. …

Neural Network Based Reactive Control Of Point Absorber Wave Energy Converters, Abdelmoamen Ali Nasser

Theses

The main objective of this work is to develop a neural-network-based Reactive Control (RC) system for wave energy converters. The ability to maximize the power output of WEC while maintaining operation constraints, which can be physical or thermal, is crucial to the development of deployable control strategies. Having a control method that is robust, which means it handles uncertainty and noise very well, is one of the main performance criteria in evaluating the method. Therefore, this work starts by deriving an averaged WEC model to be simulated in MATLAB/Simulink. Additionally, the concepts of resistive loading control and reactive control (approximate …

Sludge-Based Activated Carbon: Characterization And Performance For Removal Of Methylene Blue From Aqueous Solution, Ahmad Anwar Al Madhoon

Theses

Domestic wastewater treatment plants in the United Arab Emirates (UAE) produce 122 thousand tons of dried sludge annually. About 70% of this sludge is dumped in landfills, creating water and soil contamination. Sludge is an energy-rich organic material that could be converted into activated carbon by thermal or chemical processes. Potassium hydroxide has shown great potential as an activating agent for producing high-quality sludge based activated carbon (SBAC). However, its use adds to the cost of the production process. Thus, there is a need for an alternative activating agent that is not costly. One possible chemical is carbide lime which …

Disturbance-Observer Based Control For Pwm Rectifiers Without Dc Voltage Oscillations Under Unbalanced Grid Conditions, Mohammed Samer Al-Razehi

Theses

A three-phase controlled rectifier is a power electronic converter that employs the grid voltages as an input to produce a constant dc voltage at its output through the use of a capacitor, known as dc-link capacitor. However, the switching devices of power converters can create harmonics in the grid current, which mandates the need for filters to ensure high-quality grid current. This explains why the power converter is normally connected to the grid using passive filters such as L filter or LCL filter. The L filter is normally preferred over LCL filter to reduce harmonic distortions in grid currents as …

Biodegradable Heat Insulation Composites Based On Poly(Β-Hydroxybutyrate) And Date Palm Wood, Amal Ibrahim Mlhem

Theses

Residential buildings contribute the most to energy consumption. It was found that energy savings of 20% can be achieved through the thermal insulation of residential buildings in the United Arab Emirates. For this reason, research has been conducted in the field of sustainable thermal insulation materials. Wood-Plastic Composites (WPC) are a relatively new generation of biocomposites and are particularly suitable for construction and building applications, which offers high thermal and acoustic insulation properties., reducing carbon emissions and decreasing negative impacts on the environment due to their biodegradability, sustainability, renewability, and recyclability. The first part of this study investigated the thermal …

Design Of Low-Cost Power Quality And Energy Monitoring System For Low Voltage Distribution Network, Rami Moustafa Mohyeldeen

Theses

The constant increase of non-linear loads and the future high integration of renewable energy sources in the power grid make power quality monitoring systems crucial to maintain maximum efficiency and reliability. However, the current devices for power quality monitoring are costly, limiting PQ monitoring systems' usage to specific applications and for a particular time. This thesis aims to present a design and the implementation of a low-cost power quality monitoring system using a single-board computer (Raspberry Pi) and highly accurate multiphase power quality monitoring ADE9000 IC. The proposed PQM system is configured to work remotely through either a wireless connection …

Quality-Of-Service Provisioning For Smart City Applications Using Software-Defined Networking, Basima Kurungadan

Theses

In the current world, most cities have WiFi Access Points (AP) in every nook and corner. Hence upraising these cities to the status of a smart city is a more easily achievable task than before. Internet-of-Things (IoT) connections primarily use WiFi standards to form the veins of a smart city. Unfortunately, this vast potential of WiFi technology in the genesis of smart cities is somehow compromised due to its failure in meeting unique Quality-of-Service (QoS) demands of smart city applications. Out of the following QoS factors; transmission link bandwidth, packet transmission delay, jitter, and packet loss rate, not all applications …

Mitigating Progressive Collapse Resistance Of Reinforced Concrete Framed Structures With Innovative Reinforcing Scheme, Ahmad Zaki Abdelkarim

Theses

The objective of this thesis is to numerically investigate the performance and efficiency of a novel proposed mitigating method to improve the resistance of reinforced concrete (RC) floor systems to progressive collapse as a result of a potential column failure. The proposed mitigating method applies to RC floor systems in framed structures, and it is based on a concept of developing self-generated “post-tensioning” axial compressive forces within segments of the floor beams that bridge over the potential failed column. To achieve this goal, the proposed method is comprised of adding diagonal top and bottom steel bars within the floor slab …

Advancing Industrial Participation In Demand Response Within National Electricity Grids Through Systematic Asset Selection, Risk Assessment And Modelling Approaches, Alexander Brem

Theses

Increasing the flexible capacity on national electricity grids will be key to maintain reliable control as the levels of renewables continue to increase annually. The industrial sector has been identified as being capable of contributing and potentially offering flexible capacities, following appropriate investigation. The aim of this thesis is to develop the knowledge, advance the engagement and encourage additional participation in national demand response programmes from the industrial sector to provide this flexibility. The potential within this sector, facilitated by the smart grid and demand response concepts is outlined, specifically detailing their benefits, driving factors and potential barriers as part …

Coupled Oscillators: Protein And Acoustics, Angelique N. Mcfarlane

Theses

This work encompassed three different vibrational energy transfer studies of coupled resonators (metal, topological, and microtubule comparison) inspired by the lattices of microtubules from regular and cancerous cells. COMSOL Multiphysics 5.4 was utilized to design the experiment. The simulation starts with an acoustic pressure study to examine the vibrational modes present in coupled cylinders, representing α-, β-tubulin heterodimers. The Metal Study consisted of 3 models (monomer, dimer, and trimer) to choose the correct height (40 mm) and mode (Mode 1) for study. The Topological Study was run to predict and understand how the lattice structure changes over a parametric sweep …

Back And Shoulder Exoskeletons For Occupational Use: A Review, Erkan Ozan

Theses

Work-related musculoskeletal disorders (MSDs) account for a large portion of all work-related injuries according to OSHA. Back and shoulder-related disorders make the most of work-related MSDs according to the Bureau of Labor Statistics (BLS). Exoskeletons emerged in recent years with the potential to reduce the risks of work-related musculoskeletal disorders and injuries. Their use in occupational settings is increasing, and exoskeleton designs are rapidly evolving. This paper reviewed recent scientific articles (2015 and after) that evaluated back and shoulder-support passive industrial exoskeletons. The findings of these articles are summarized and analyzed to assess the benefits of passive upper-body exoskeletons by …

Effects Of Wettability, Lithology, And Permeability On The Optimum Slug Size Of Low Salinity Water Flooding In Carbonates: An Experimental Approach, Hala Khaled Hasan Alshadafan

Theses

Low salinity water flooding has attracted academic and industry communities due to its relatively simple and applicable technology. One of the drawbacks of applying the IOR/EOR technique is the lack of the availability of low salinity water in large quantities at the reasonable cost required for a technically and environmentally successful project. To overcome this problem, the industry proposed to use produced water/sea water after dilution, and reverse osmosis filter technology to achieve the required salinity. Both techniques are quite costly and might hinder the project's economic success. Low salinity water as slug size followed by high salinity water was …

Human Detection From Aerial Imagery For Search And Rescue Operations, Namat Ahmad Bachir

Theses

Mountain recreation is becoming more popular with mountaineering, rock climbing, skiing, mountain biking, hiking, and mushroom picking among the most popular sports. Despite this tendency, there is currently limited research available explaining the rise in search and rescue (SAR), as well as the injuries and illnesses that entail SAR aid in tourist-friendly mountain and desert areas. The objective of a search and rescue operation is to scan the farthest area feasible in the shortest amount of time in order to locate a lost or wounded individual. In the past decade, several new and spectacular uses for drones, including search and …

Deep Learning Based Segmentation And Classification For Improved Breast Cancer Detection, Bita Khosrow Asadi Khosrow Asadi

Theses

Breast Cancer is a leading killer of women globally. It is a serious health concern caused by calcifications or abnormal tissue growth in the breast. Doing a screening and identifying the nature of the tumor as benign or malignant is important to facilitate early intervention, which drastically decreases the mortality rate. Usually, it uses ultrasound images, since they are easily accessible to most people and have no drawbacks as such, unlike in the other most famous screening technique of mammograms where in some cases you may not get a clear scan. In this thesis, the approach to this problem is …

Aerodynamics And Aeroacoustics Optimization Of Vehicle’S Side Mirror Base And Exhaust Pipe, Moath Nayef Mohamed Zaareer

Theses

This thesis is concerned with studying two different vehicle parts in terms of aerodynamics and aeroacoustics. Two main factors determine the efficiency and luxury of the vehicle, the low aerodynamic forces and low noise emission. The aerodynamic drag coefficient is concerned with how easy a vehicle can travel through the air; the lower the value, the less fuel is needed to move the vehicle forward and less air resistance the vehicle faces. The aerodynamic lift coefficient is related to vehicle ground stability, and the more negative the value is, the higher the vehicle's stability. Moreover, the aeroacoustics is concerned with …

Performance Evaluation Of Glass-Fiber Reinforced Cement-Free Geopolymer Concrete, Mohammad Zuaiter

Theses

The alkali-activation of aluminosilicate materials produces a geopolymer binder that promises to be a sustainable replacement to cement in concrete. Yet, such concrete has experienced brittle behavior and poor resistance to cracking. As a means of improving its performance, this research assesses the feasibility of utilizing glass fibers in slag-fly ash blended geopolymer concrete for structural applications. A blend of slag and fly ash served as the binding material. Two types of glass fibers were used individually or as a hybrid combination. Type A and B glass fibers had similar properties but different lengths of 24 and 43 mm, respectively. …

Using Metal-Organic Frameworks (Mof) To Reduce The Carbon Footprint Of Concrete, Mona Ibrahim El-Hallak

Theses

The production of concrete by the construction industry has a massive impact on the environment. The process of manufacturing its main component, cement, releases a considerable amount of anthropogenic carbon dioxide. This thesis is concerned with the production of sustainable and eco-friendly concrete that integrates metal-organic frameworks (MOF) to capture and offset the CO₂ emissions emitted during the production of cement. The main objective is to synthesize a MOF capable of capturing CO₂ in concrete through accelerated carbonation curing and to assess its impact on concrete performance. Different parameters were examined, including the MOF content, initial curing duration, …

Fabrication And Characterization Of Graphene Oxide-Based High-Density Polyethylene / Polypropylene Nanocomposites For Biomedical Applications, Albaina Ali Aldhaheri

Theses

Polymeric nanocomposites have recently become one of the most essential sought-after materials for biomedical applications. Among many others, High-Density Polyethylene (HDPE) is being widely used as a bearing material for the artificial hip and knee joints. However, the weak surface properties of HDPE limit the total artificial hip joints’ survival chances. The addition of polypropylene (PP) improves the surface properties of HDPE composites along with their thermal, chemical, and mechanical properties which are crucial in biomedical applications. Moreover, PP can be easily blended with polyethylene (PE) as it has an almost similar chemical resistance to PE. However, PP is more …

Thermal Stress Mitigation Of Single-Phase Sinewave Inverter By Using Double Switch H Bridge Configuration, Mohammad Mousa Ahmad Hushki

Theses

The increasing demand for renewable energies and the ongoing advancement in the industry require continuously evolving power converters in terms of efficiency, power density, and reliability. Furthermore, power converters’ applications in harsh and remote environments such as offshore wind turbines demand robust and reliable designs to help reduce operational costs. Power switch failure is a critical reliability issue that leads to the converter going out of service, causing an unscheduled maintenance event. The main reason behind power switch failure is thermal cycling. Therefore, the first part of this thesis attempts to develop an effective double switch H bridge inverter topology …

Numerical Modelling Of Externally-Bonded Fiber Reinforced Polymer Shear-Strengthened Reinforced Concrete Beams Subjected To Fatigue Loading, Nagwa Ibrahim Fares

Theses

An extensive number of existing structures persistently exposed to fatigue loading such as bridges, offshore structures, pavements, and highways, are in urgent need of repairing and strengthening. This may be attributed to the continuous increase in the load requirements, change of the structure’s function, and meeting current load standards. Among the potential methods of rehabilitation and strengthening of existing reinforced concrete structures, the externally bonding fiber reinforced polymers (FRP) composites are gaining massive popularity and becoming a viable and cost-effective method. Shear failure of reinforced concrete (RC) beams is known to be brittle, which occurs without prior sufficient warnings; therefore, …

Robust Detection Of Coronary Heart Disease Using Machine Learning Algorithms, Anas Haitham Domyati

Theses

Predicting whether or not someone will get heart or cardiac disease is now one of the most difficult jobs in the area of medicine. Heart disease is responsible for the deaths of about one person per minute in the contemporary age. Processing the vast amounts of data that are generated in the field of healthcare is an important application for data science. Because predicting cardiac disease is a difficult undertaking, there is a pressing need to automate the prediction process to minimize the dangers that are connected with it and provide the patient with timely warning. The chapter one in …

Static Testing Of Hybrid Rocket Engine Using Biomass Waste, Saleh Mohammed Musaed Badi

Theses

This work investigates experimentally for the first time the performance of two solid biomass wastes as propellants for a Hybrid Rocket Motor based on the combustion and propulsion parameters such as combustion chamber pressure, thrust force, chamber temperature, combustion characteristics, and flame length generated. The main objective of this study is to examine the performance of the proposed biomass fuels (Date stone powder and Jojoba waste powder) in comparison with typical hydrocarbon fuels. To make an accurate comparison, Paraffin Wax-based propellant was used in this study as a reference fuel to compare with biomass performance using the same testing facility …

Un-Fair Trojan: Targeted Backdoor Attacks Against Model Fairness, Nicholas Furth

Theses

Machine learning models have been shown to be vulnerable against various backdoor and data poisoning attacks that adversely affect model behavior. Additionally, these attacks have been shown to make unfair predictions with respect to certain protected features. In federated learning, multiple local models contribute to a single global model communicating only using local gradients, the issue of attacks become more prevalent and complex. Previously published works revolve around solving these issues both individually and jointly. However, there has been little study on the effects of attacks against model fairness. Demonstrated in this work, a flexible attack, which we call Un-Fair …

Quantitative Dynamic Cellular Imaging Based On 3d Unwrapped Optical Coherence Phase Microscopy, Arunkumar Gunasekar

Theses

Phase wrapping artifacts are frequently encountered in phase resolved imaging and sensing techniques based on interferometry. When the value of the actual phase (φ) ranges beyond (-π, π], the extracted phase value (wrapped phase Ψ) is artificially increased or decreased by a multiple of 2π.

In this study, we develop a 3D phase unwrapping method that exploits the correlation of 3D phase data (φ(x,y,t)) over the other dimension (t). We validate our 3D unwrapping method using simulated data, as well as experimental data obtained by optically computed phase microscopy (OCPM) recently developed in our lab. Our results show that the …

A Detailed Parameter Study Into The Dermal Absorption Of Chemical Warfare Agents And The Effects Of Pharmacokinetics, Koko Lear

Theses

Chemical warfare agents (CWAs) are substances of varying toxicity profiles. These chemicals exhibit complex dynamics and pose a serious health risk when released into the environment. A mathematical model based on Fick’s second law of diffusion was developed to comprehend how these compounds were absorbed into the skin. The analysis applied to both small and large doses and, successfully, predicted experimental results. This work also includes the effects of CWA physicochemical properties on evaporation and dermal absorption through the stratum corneum. A sensitivity analysis was conducted to assess the impacts of small variations in the initial dose, environmental conditions, and …

The Interconnection Of The Vestibular And Oculomotor Systems Analyzed In Healthy Young Adults By Examining Postural Sway, Cassandra Martin

Theses

In order to study the human brain in a non-invasive way, the vestibular and oculomotor systems have been analyzed simultaneously. To achieve this, an eye movement and balance assessment was conducted for 29 (23 male; 21.6 ± 3.8 years) healthy participants with no history of concussions, brain injuries, vertigo, migraines, brain surgeries, eye surgeries, or amblyopia. The tasks consisted of eyes open, eyes closed, horizontal saccades, vertical saccades, vergence jumps, horizontal vestibulo-ocular reflex (VOR), and vertical VOR. Each task was completed in two stances: feet shoulder width apart and feet together. Distance, velocity, sway area, center of pressure (COP) frequency, …

An Intelligent Passive Islanding Detection And Classification Scheme For A Radial Distribution System, Mohannad Khaleel Subhi Suleiman

Theses

Distributed generation (DG) provides users with a dependable and cost-effective source of electricity. These are directly connected to the distribution system at customer load locations. Integration of DG units into an existing system has significantly high importance due to its innumerable advantages. The high penetration level of distributed generation (DG) provides vast techno-economic and environmental benefits, such as high reliability, reduced total system losses, efficiency, low capital cost, abundant in nature, and low carbon emissions. However, one of the most challenges in microgrids (MG) is the island mode operations of DGs. the effective detection of islanding and rapid DG disconnection …