Engineering Commons^™

Inkjet Based Personalized Screening Platform For Cancer Therapy, Jorge Ivan Rodriguez

Open Access Theses & Dissertations

The new paradigm of personalized medicine is beginning to affect clinical practice. In particular, many of the advances in genomics and proteomics have made personalized screening and therapeutic inventions possible. On chip, cellomics approaches to screening and intervention are becoming more commonplace. Cancer therapies may benefit from the rise in `-omics' technologies. In addition, the availability of rapid screening data is crucial to mitigate cancer propagation and increase the possibility of patient recovery. This study is an endeavor to develop a cellomic anticancer drug screening process based on inkjet printing. Previous research has demonstrated that inkjet based screening can reliably …

3d Printing For The Rapid Prototyping Of Structural Electronics, Rodolfo Salas

Open Access Theses & Dissertations

In business, the time required to shepherd a new product through the phases of concept, design, prototypes, through manufacture and finally making the product available for sale (together known as: Time to Market) is critical to the success and profitability of the next generation of products. The use of relatively new technologies, known as 3D Printing, which allow the fabrication of complex tridimensional shapes within hours of a completed CAD design without the need for tooling or molds, has significantly reduced the time required for a designer to physically hold a part designed only hours before and to perform form …

Reduced-Order Modeling Using Orthogonal And Bi-Orthogonal Wavelet Transforms, Miguel Hernandez Iv

Open Access Theses & Dissertations

It is well known that model reduction methods borrow techniques typically found in data compression, and current state-of-the-art techniques for data compression are based on the wavelet transform. Given these facts, it is surprising that model reduction using wavelets has not received much attention and has not been adequately addressed in the literature. This research seeks to determine if wavelets can be used for model reduction and if wavelet model reduction is a viable alternative to existing model reduction methods.

In this work we propose a novel method for model reduction using wavelets. Specifically, we introduce techniques for deriving wavelet …

Structural, Optical And Electrical Properties Of Yttrium-Doped Hafnium Oxide Nanocrystalline Thin Films, Abhilash Kongu

Open Access Theses & Dissertations

Hafnium oxide (HfO2) has emerged as the most promising high-k dielectric for Metal-Oxide-Semiconductor (MOS) devices and has been highlighted as the most suitable dielectric materials to replace silicon oxide because of its comprehensive performance. In the present research, yttrium-doped HfO2 (YDH) thin films were fabricated using RF magnetron sputter deposition onto Si (100) and quartz with a variable thickness. Cross-sectional scanning electron microscopy coupled with Filmetrics revealed that film thickness values range from 700 A° to 7500 A°. Electrical properties such as AC Resistivity and current-voltage (I-V) characteristics of YDH films were studied. YDH films that were relatively thin (<1500 A°) crystallized in monoclinic phase while thicker films crystallized in cubic phase. The band gap (Eg) of the films was calculated from the optical measurements. The band gap was found to be ∼5.60 eV for monoclinic while it is ∼6.05 eV for cubic phase of YDH films. Frequency dependence of the electrical resistivity (ρac) and the total conductivity of the films were measured. Resistivity decreased (by three orders of magnitude) with increasing frequency from 100 Hz to 1 MHz, attributed due to the hopping mechanism in YDH films. Whereas, while ρac∼1Ω-m at low frequencies (100 Hz), it decreased to ∼ 104 Ω-cm at higher frequencies (1 MHz). Aluminum (Al) metal electrodes were deposited to fabricate a thin film capacitor with YDH layer as dielectric film thereby employing Al-YDH-Si capacitor structure. The results indicate that the capacitance of the films decrease with increasing film thickness. A detailed analysis of the electrical characteristics of YDH films is presented.

Investigation Of The Radiative Heat Release Factor Of Premixed Oxy-Syngas Flames, Martin De La Torre

Open Access Theses & Dissertations

A significant part of the United States is being powered by combustion devises relying on coal since it is abundant and is a high emitting source of electricity per unit energy, however; the burning of this fuel is responsible for a significant contribution for the pollutant emissions causing global warming. Because coal is one of the main sources of energy in the U.S. and around the globe, the scientific community has been investigating ways to meet current and future governmental emission requirements. It is now well established that radiating heat from the flame is a major contributor of the heat …

A Case Study Towards Verification Of The Utility Of Analytical Models In Selecting Checkpoint Intervals, Michael Joseph Harney

Open Access Theses & Dissertations

As high performance computing (HPC) systems grow larger, with increasing numbers of components, failures become more common. Codes that utilize large numbers of nodes and run for long periods of time must take such failures into account and adopt fault tolerance mechanisms to avoid loss of computation and, thus, system utilization. One of those mechanisms is checkpoint/restart. Although analytical models exist to guide users in the selection of an appropriate checkpoint interval, these models are based on assumptions that may not always be true. This thesis examines some of these assumptions, in particular, the consistency of parameters like Mean Time …

A Method To Reduce Plastic Shrinkage Cracking Of Concrete Using Re-Vibration Technique, Mustafa Abushaala Aldalinsi

Open Access Theses & Dissertations

One of the problems that reduce durability; thus, performance of concrete is the development of plastic shrinkage cracking (PSC). Traditionally, the development of PSC has been minimized by controlling its exposure to weather conditions or by adding fibers. In this study, concrete re-vibration was used as an alternative technique to control PSC because of the limited availability of fibers in the developing countries. In this study, the wait time after slab casting and before vibration was selected to be 90 minutes while length of re-vibration time was varied from 15 to 45 seconds. Also, the water-cement ratios were selected to …

Phosphoric Acid Based Solar Absorber Coatings, Flor Gallegos

Open Access Theses & Dissertations

Solar thermal energy technology has become a successful part of today's world's energy supply. It is a growing field with new applications and better equipment designs every year. High-performance solar heating depends on improved coatings that are designed to maximize absorption and minimize reflection of the sun's radiant heat. Solar absorber coatings for applications such as solar domestic water heating are already available; however the cost and energy efficiency can be improved. This improvement can be made by minimizing cost if solar absorber coatings can be applied to steel at low cost. The work conducted in this thesis research was …

Microstructure And Mechanical Properties Of Titanium Nitride Optical Coatings Made By Dc Magnetron Sputtering, Gustavo Martinez

Open Access Theses & Dissertations

Titanium nitride (TiNx) thin films were grown by DC (Direct Current) magnetron sputtering method onto Si(100) substrates by varying time of deposition to produce films with variable thickness (dTiN) in the range of 20-120 nm. The grown TiNx films were characterized by studying their structure, composition, and mechanical properties. Nuclear reaction analysis (NRA) combined with Rutherford backscattering spectrometry (RBS) analyses indicate that the grown films were stoichiometric TiN. Grazing incidence X-ray diffraction (GIXRD) measurements indicate that the texturing of the TiN films changes as a function of dTiN. The (111) and (002) peaks appear initially; with increasing dTiN, (111) becomes …

Characterization Of Particulate Matter Concentrations (Pm10, Pm10-2.5, And Pm2.5) At High-Altitude School And Residential Mircroenvironments In Quito, Ecuador, Teresa Montoya

Open Access Theses & Dissertations

Air quality issues in Latin American countries are especially challenging because of the limited availability of resources to address them, lack of stringent standards and the rapid and uncontrolled growth of their cities increasing the number of vehicles on the road and the expansion of the industry. In particular, the city of Quito, Ecuador exacerbates its environmental issues by its high-altitude (2800 m above sea level) coupled by its location around a mountain valley and frequent temperature inversions.

This study focused on evaluating the spatial variation of the PM concentrations and the effectiveness of a central monitoring network in representing …

Asynchronous Logic Design With Increased Fault Tolerance And Optimized For Subthreshold Operation, Ivan Santos

Open Access Theses & Dissertations

Synchronization has always been an essential feature in electronic circuits, in which functionality is achieved by an appropriate flow of data with respect to time. An ideal concept of logic design would require every operation to happen instantly; however, the application of this principle to electronics is governed by the laws of physics, which influence the time to execute a process. In fact, the speed at which a microprocessor can perform logic operations is determined by the time that charging and discharging capacitive loads requires, and the time that electric signals spend when traveling through the circuitry. Consequently, the variation …

Assessment And Evaluation Of The Dynamic Behavior Of Muscles With Special Reference To Subjects With Diabetes Mellitus, Jorge Garza-Ulloa

Open Access Theses & Dissertations

Diabetes mellitus (simply diabetes) is a group of metabolic diseases in which a person has high blood sugar, either because the body does not produce enough insulin, or because cells do not respond to the insulin that is produced. Each year, the costs of diabetes rise. Diabetes and its complications cost our national economy. Two new methods are proposed to measure the diabetes implications in the muscles of lower body: Muscle energy expenditure analysis based on the detection of muscle transition-to-fatigue, and Natural Fuzzy logic method for differential analysis in muscle/joint. Then the results are compared with the traditional method …

Assessment Of Abaqus Capabilities For Crack Growth And Calculation Of Energy Release Rate, Luis Alonso Hernandez

Open Access Theses & Dissertations

The purpose of this study was to benchmark ABAQUS modeling capabilities for crack propagation and calculation of energy release rate against closed-form analytical solutions. The crack growth capability for this study was evaluated using the following techniques: virtual crack closure technique (VCCT), X-FEM coupled with VCCT, and X-FEM coupled with cohesive segments. The capability of calculating the energy release rate was assessed by using the J-integral routine. A Double Cantilever Beam (DCB) specimen was used to conduct the study for mode I propagation, and a mixed mode bending (MMB) specimen was used to study the propagation for mixed mode I/II …

Model Fusion: A New Approach To Processing Heterogeneous Data, Omar Ochoa

Open Access Theses & Dissertations

In many practical situations, it is necessary to extract

information from data of different types. For example, in geosciences, several sources of data can be used to determine the interior structure of the earth: the first arriving waves from earthquakes and from man-made sources, measurements of the earth's gravity field, measurements of the dispersion of surface waves generated by earthquakes, etc. At present, most existing data processing techniques deal only with data of one type.

A joint use of all the information derived from multiple types of data sources is an important theoretical and practical challenge. Such a joint use …

Structure And Electronic Properties Of Pure And Nitrogen Doped Nanocrystalline Tungsten Oxide Thin Films, Vemnkata Rama Sesha Ravi Kumar Vemuri

Open Access Theses & Dissertations

Tungsten oxide (WO₃) is a multifunctional material which has applications in electronics, sensors, optoelectronics, and energy-related technologies. Recently, electronic structure modification of WO₃ to design novel photocatalysts has garnered significant attention. However, a fundamental understanding of nitrogen induced changes in the structure, morphology, surface/interface chemistry, and electronic properties of WO₃ is a prerequisite to producing materials with the desired functionality and performance. Also, understanding the effect of thermodynamic and processing variables is highly desirable in order to derive the structure-property relationships in the W-O/W-O-N material system. The present work was, therefore, focused on studying the effects …

An Approach To Power Efficiency Determination In The Solar Energy Systems Using Central Composite Design And Box-Behnken Design, Juan Venegas Mendez

Open Access Theses & Dissertations

We are living in an industrialized world that relies on fossil fuels. The ways, in which these fossil fuels have damaged the earth, in special the environment is worth of special attention and corrective actions. In our days, the climate change (global warming) it is becoming the number one topic. These changes are affecting our health, comfort and our way of living. Solar systems have been working among us since several years, but the truth is that most of us really don't understand how they work and more important, how they work in time in different conditions. Solar panels are …

Development Of Advanced Polymer Nanocomposite Capacitors, Md Rajib

Open Access Theses & Dissertations

With the development of modern technology, the demand of high energy density dielectric capacitor devices is increasing for its significant role in stationary power systems, mobile devices, and pulse power applications. Among the different energy storage devices, polymer film based dielectric capacitor is still one of the most widely used energy storage devices mainly due to its high energy density, significant higher charge/discharge rate and low cost. To further enhance the energy density, high dielectric ceramic inclusions have been embedded in the polymer matrix; however, the temperature influence on the energy density has not been investigated. Therefore, in this research …

Prediction Of Foreign Object Debris/Damage Fod Type Based In Human Factors For Aeronautics Using Logistic Regression Model, David Ricardo Romo

Open Access Theses & Dissertations

Foreign Object Debris/Damage (FOD) has been an issue for military and commercial aircraft manufacturers since the early ages of aviation and aerospace. Currently, aerospace is growing rapidly and the chances of FOD presence are growing as well. One of the principal causes in manufacturing is the human error. The cost associated with human error in commercial and military aircrafts is approximately accountable for 4 billion dollars per year. This problem is currently addressed with prevention programs, elimination techniques, and designation of FOD areas, controlled access, restrictions of personal items entering designated areas, tool accountability, and the use of technology such …

Solving Logistic System Design Problem Considering Various Biomass Feedstock Using Two Metaheuristic Optimization Methods, Jesusita Ibarra

Open Access Theses & Dissertations

Bioenergy has become an important source of energy; it can be used as an alternative to fossil fuel energy, and it offers significant potential to alleviate climate change by reducing greenhouse gas emissions caused by the burning of fossil fuels. The Energy Independence and Security Act decrees the use of 21 billion gallons of advanced biofuel including 16 billion gallons of cellulosic biofuels by the year 2022. It is easy to observe that biomass can make a considerable contribution meet the energy demands. On the other hand, the supply of sustainable energy is one of the main challenges that must …

A Quantitative Approach Using An Axiomatic Design Framework To A Medication Distribution System, Pepito Raguini

Open Access Theses & Dissertations

As the need to minimize medication errors drives many medical facilities to come up with robust solutions to the most common error that affects patient's safety, these hospitals would be wise to put a concerted effort into finding methodologies that can facilitate an optimized medical distribution system. If the hospitals' upper management is looking for an optimization method that is an ideal fit, it is just as important that the right tool be selected for the application at hand. In the present work, we propose the application of Axiomatic Design (AD), which is a process that focuses on the generation …

Purification Of Sodium Sulfate By Crystallization, Perla Teresita Torres

Open Access Theses & Dissertations

Sodium sulfate can be recovered from a dilute solution by concentrating it by conventional water treatment techniques like reverse osmosis and electrodialysis; however, those processes also concentrate impurities like arsenic. The sodium sulfate would have commercial use if it can be recovered in an arsenic-free form. This study demonstrated that sodium sulfate could be separated from impurities using slow cooling crystallization in a novel apparatus developed and designed during the experimentation. This device is called a heat exchanger crystallizer and allows slow cooling crystallization in order to grow pure crystals of sodium sulfate decahydrate. Crystals grown in the heat exchanger …

Investigation Into The Operation And Safety Of Freeway Auxiliary Lanes: Towards Uniform Design Guidelines, Yubian Wang

Open Access Theses & Dissertations

Freeways operate closest to the purest form of uninterrupted traffic flow. There is no constant interruption to traffic flow (such as stop sign and traffic signal), and access is limited to ramp locations. Therefore, at freeways, bottlenecks, if exist, are usually caused by merging and diverging traffic at ramp locations. Bottleneck removal at freeway ramp areas can reduce average freeway commuter delay. Currently, engineers may add auxiliary lanes at ramp areas to mitigate or remove bottlenecks.

The American Association of State Highway Transportation Officials (AASHTO) publication A Policy on Geometric Design of Highways and Streets, commonly known as the "Green …

Reducing Metal Alloy Powder Costs For Use In Powder Bed Fusion Additive Manufacturing: Improving The Economics For Production, Fransisco Medina

Open Access Theses & Dissertations

Titanium and its associated alloys have been used in industry for over 50 years and have become more popular in the recent decades. Titanium has been most successful in areas where the high strength to weight ratio provides an advantage over aluminum and steels. Other advantages of titanium include biocompatibility and corrosion resistance. Electron Beam Melting (EBM) is an additive manufacturing (AM) technology that has been successfully applied in the manufacturing of titanium components for the aerospace and medical industry with equivalent or better mechanical properties as parts fabricated via more traditional casting and machining methods. As the demand for …

Crystal Structure, Phase, And Optical Properties Of Yttrium-Doped Hafnium Oxide Nanocrystalline Thin Films, Alejandro Ortega

Open Access Theses & Dissertations

Yttrium-doped hafnium oxide (YDH) nanocrystalline films were produced by sputter-deposition at various substrate times and temperatures, to produce YDH films in a wide range of thicknesses, dYDH∼25 to 1100 nm. The deposition was made onto optical grade quartz and sapphire substrates. Samples deposited on sapphire were subject to post-deposition annealing (PDA) at various times (3-24 hr) and temperatures (1100 - 1500 °C). The effect of d[special characters omitted]YDH on the crystal structure, surface/interface morphology and optical properties of YDH films was investigated. X-ray diffraction analyses revealed the formation of monoclinic phase for relatively thin films (<150nm). The evolution towards stabilized cubic phase with increasing dYDH [special characters omitted]is observed. The scanning electron microscopy results indicate the dense, columnar structure of YDH films as a function of dYDH. Spectrophotometry analyses indicate that the grown YDH films are transparent and exhibit interference fringes. The band gap was found to be ∼ 5.60 eV for monoclinic YDH films while distinct separation and an increase in band gap to 6.03 eV is evident with increasing dYDH and formation cubic YDH films. The PDA films band gaps were found to be between 5.31 and 5.72 eV, all of which exhibit secondary gaps. A correlation between growth conditions, annealing, phase evolution, and optical properties of the YDH nanocrystalline thin films is established.

The Standardization Of Printable Materials And Direct-Write Systems, Jessica Lynn Porras

Open Access Theses & Dissertations

The standardization of Printable Materials and Direct-Write Systems addresses the many areas of Printing Nano Engineering that lack standards. Printing Nano Engineering is a new method of manufacturing electronics that utilize direct-write system with printing principles to manufacture electronic components.

Standards need to be developed for the different direct-write systems and printable materials in order to provide compatibility amongst printed electronics and to allow the optimization for direct-writ s e systems, and printable materials associated with these systems. There are many different types of direct-write systems in industry; each system involves different methods for printing that incorporates the limiting parameters …

Comparative Characterization Of Ni-Base Superalloys Fabricated By Laser And Electron Beam Melting Technologies, Krista Amato

Open Access Theses & Dissertations

Nickel-base superalloys have been used in cast and wrought, and powder metallurgy forms for nearly four decades for industrial and automotive applications. One drawback of cast alloys is that upon solidification, there is minimal microstructural control. Another issue to be improved is to eliminate the limitations of shapes and forms of fabricated alloys.

Rapid prototyping is a new technology of additive manufacturing that shows to be promising for the freeform fabrication of novel superalloys, including nickel-base alloys. New rapid manufacturing technologies allow us to produce parts in any shape that can be designed by computer-aided design (CAD) software. Additionally, the …

Determinants Of Neighborhood Exposure To Extreme Heat: A Spatial Examination Of El Paso And Juárez, 2010, Faraj Mohamad Aboargob

Open Access Theses & Dissertations

Numerous studies have been conducted on the modification of local weather by the urban environment. In studying urban environmental effects on the urban heat island (UHI), researchers have investigated influences such as land use, vegetation density, topography, population density, and neighborhood socioeconomic status. Many studies have used data collected from field observations, while other studies relied solely on computer modeling. This Dissertation research used a spatial analysis approach, which has been less widely employed, to investigate neighborhood level biophysical, built environmental and socio-demographic determinants of the El Paso and Juárez UHI. The research utilized inexpensive data obtained from US and …

Integration Of Memristors With Mems For Dynamic Displacement Control, Sergio Fabian Almeida Loya

Open Access Theses & Dissertations

In recent years the demand for high-speed, lower power consumption and large-capacity non-volatile memories has increased. Promisingly the memristor can be used due to its special characteristic of having memory through resistance change. The memristor behavior is not limited to digital applications but it can be used in analog application as well including: memristors in chaotic circuits, amoeba's learning, neural synaptic emulation, reprogrammable and reconfigurable circuits, and for neuromorphic computers. On the other hand Micro Electro Mechanical Systems (MEMS) are small scale structures that can interact with the physical world due to their mechanical properties. These devices are widely used …

Preparation Of Cobalt/Nickel Molybdenum Sulfide Catalysts Supported By Aqueous Media Soluble Multi-Wall Carbon Nanotubes., Hassan Ahmad Bleibel

Open Access Theses & Dissertations

Multi-walled carbon nanotubes (MWCNTs) have been subjected to chemical treatment in order to introduce hydrophilic functional groups on their surfaces. These covalently bonded groups did enhance the solubility of MWCNTs in aqueous media as expected. Functionalized MWCNTs were characterized using FTIR, Raman spectroscopy, TGA, X-ray diffraction, dispersion test and TEM. Then, functionalized MWCNTs were incorporated in the hydrothermal synthesis method of transition metal sulfide catalysts (CoMo, NiMo, and Ethylenediamine-CoMo Sulfides). Catalysts were characterized using X-ray diffraction, TEM, SEM, N2 Gas adsorption-desorption, elemental analysis, and Hydrodesulfurization (HDS) reaction of dibenzothiophene (DBT). The objective was to study the functionalized MWCNTs' effect; being …

Post-Pareto Optimality Methods For The Analysis Of Large Pareto Sets In Multi-Objective Optimization, Victor Manuel Carrillo

Open Access Theses & Dissertations

Multiple objective optimization involves the simultaneous optimization of more than one, possibly conflicting, objectives. Multiple objective optimization problems arise in a variety of real-world applications. In general, the main difference between single and multi-objective optimization is that in multi-objective optimization there is usually no single optimal solution, but a set of equally good alternatives with different trade-offs, also known as Pareto-optimal solutions. There are two general approaches to solve multiple objective optimization problems: mathematical methods and meta-heuristic methods. The first approach involves the aggregation of the attributes into a linear combination of the objective functions, also known as scalarization. The …