Engineering Commons^™

Characterizing Cryogenic Propellant Flow Behavior Through A Cavitating Venturi In Comparison To Alternative Flow Control Mechanisms, Marjorie Adele Ingle

Open Access Theses & Dissertations

The work detailed is an investigation of the use of a cavitating venturi as both a flow control and metering device. This was achieved through the combination of actual experimentation and numerical modeling of the fluid behavior of both liquid water and liquid methane as it passes through the test article designed, developed, and validated here within this study. The discharge coefficient of the cavitating venturi was determined through weigh flow calibration testing to determine an average mass flow rate. Turbine flow meter flow rate readings were used as a point of comparison and the discharge coefficient was computed. The …

Design Of Three Different Particle Size Distributions In Silver Paste Through Computer Simulation For Higher Electrical Conductivity, Kyungdeok Jang

Open Access Theses & Dissertations

In the field of printed electronics technology, researchers have tried to print highly conductive electrodes with fine width and height in order to manufacture high performance devices.

The purpose of this research is to print particle monolayer silver patterns which have better electrical conductivity than existing ones. The key idea of this experiment is to analyze silver inks with different sized particles. Let us consider a particle monolayer pattern printed with silver ink consisting of mono-sized particles. Inside of the pattern, there are some vacant spaces between the particles, which can lead to low electrical conductivity and discontinuity of the …

Decision Making Model For Foreign Object Debris/Damage (Fod) Elimination In Aeronautics Using Quantitative Modeling Approach, Jose Jaime Lafon

Open Access Theses & Dissertations

(FOD) Foreign Object Debris/Damage has been a costly issue for the commercial and military aircraft manufacturers at their production lines every day. FOD can put pilots, passengers and other crews' lives into high-risk. FOD refers to any type of foreign object, particle, debris or agent in the manufacturing environment, which could contaminate/damage the product or otherwise undermine quality standards. Nowadays, FOD is currently addressed with prevention programs, elimination techniques, and designation of FOD areas, controlled access to FOD areas, restrictions of personal items entering designated areas, tool accountability, etc. All of the efforts mentioned before, have not shown a significant …

Part Detection And Classification Using Integrated Machine Vision And Knowledge Based Expert System, Cristian Giovanni Lopez Ulloa

Open Access Theses & Dissertations

Manufacturing cost is a topic of interest in the automotive manufacturing industry. Even though rework and repair methods are acceptable processes in manufacturing, there is little investigation done on the classification and cost parameters of a repairable or re-workable part. Having a non-conforming part indicates a loss in revenue to a manufacturing company, thus the need to repair or rework the part. Repair and rework processes take non-conforming products of a manufacturing line and bring the parts back to conforming stage. In this study, the proposed system establishes a connection between detection of defects, classification of them based on defect …

Experimental Investigation Of Syngas Flame Stability Using A Multi-Tube Fuel Injector In A High Pressure Combustor, Sergio Elzar Maldonado

Open Access Theses & Dissertations

Over 92% of the coal consumed by power plants is used to generate electricity in the United States (U.S.). The U.S. has the world's largest recoverable reserves of coal, it is estimated that reserves of coal will last more than 200 years based in current production and demand levels. Integrated Gasification Combined Cycle (IGCC) power plants aim to reduce the amount of pollutants by gasifying coal and producing synThesis gas. SynThesis gas, also known as syngas, is a product of coal gasification and can be used in gas turbines for energy production. Syngas is primarily a mixture of hydrogen and …

Studying The Parameters Involved With Modulus-Based Construction Quality Control For Compaction Of Unbound Pavement Layers, Mehran Mazari

Open Access Theses & Dissertations

Pavement performance is impacted by several factors such as the properties of the materials, combination of traffic and loading, structural capability, climate changes and construction process. Earthwork and unbound materials is an important part of pavement constructions since most of the distresses can be related to these geomaterials. Appropriate process control, proper processing of geomaterials, adequate amount of moisture and suitable compaction effort would ensure the required density and stiffness of the compacted pavement layer. The Nuclear Density Gauge (NDG) has been the primary means of Quality Control and Quality Acceptance (QC/QA) by State Highway Agencies (SHAs) and department of …

Performance Evaluation Of A Lox-Lch4 Reaction Control System Thruster, Jose Luis Mena

Open Access Theses & Dissertations

The following work outlines the assessment and characterization of a 2 to 8 lbf LOX - LCH4 reaction control thruster. The evaluation includes both experimental tests and preliminary computational analysis. Testing was conducted at O/F values ranging from 1.0 to 3.0; however, future testing will evaluate the thruster at higher and intermediate mixture ratios. The test setup includes three main systems: cryogenic propellant delivery system, thrust measurement capability, and automation and controls system. Propellant flow control is achieved through the use of in-house designed cavitating venturis. Autonomous system control is accomplished via a LabVIEW program interface and DAQ system. This …

Fabrication Of A Nickel-Based Superalloy In Electron Beam Melting And Process Improvements Using Thermal Feedback From A Multi-Wavelength Pyrometer, Jonathan Minjares

Open Access Theses & Dissertations

The focus of this research was to fabricate parts composed of a nickel-based superalloy containing high levels of aluminum and titanium (NSAT) by using electron beam melting (EBM) additive manufacturing (AM) technology and utilizing thermal feedback from a multi-wavelength pyrometer to perform process improvements leading to near defect-free parts. EBM is an AM technology that utilizes metal powder to fabricate parts in layer-by-layer manner. A multi-wavelength pyrometer was implemented in an Arcam S12 (Arcam AB, Sweden) EBM system to observe and record surface temperatures throughout fabrication. Temperature data from the EBM system and the multi-wavelength pyrometer were graphed using MATLAB …

Using Fair Division Methods For Allocating Transportation Funds, Edith Montes

Open Access Theses & Dissertations

Current transportation funding allocation methods are very complex due to limited budgets and conflicting interests. In order to maintain an efficient infrastructure transportation system, agencies must balance the allocation of funds required either to increase the roadway capacity or to preserve the existing roads in service. Depending on the target objectives and specific constraints, the funding allocation process is approached using different methods. The funding allocation process is usually addressed using expert judgment which involves subjective criteria, weighted formulas with pre-established priorities, or a combination of both. However, formula-based funding allocation methods may lead to the public's disagreement if final …

High-Recovery Inland Desalination: Concentrate Treatment By Electrodialysis And Batch Reverse Osmosis, Noe Ortega-Corral

Open Access Theses & Dissertations

Since fresh water resources are finite and stressed, it is of the utmost importance to develop alternative water resources. Efforts to recover and treat impaired water are happening in arid areas around the world, where water resources are already scarce. Such efforts are particularly focused on high-recovery treatment systems, accomplished by reducing the amount of liquid discharge with the intent to eventually reach zero liquid discharge. The goal of this research is to improve the feasibility of highrecovery inland desalination systems. Two types of high-recovery treatment systems were selected for study: (1) combined reverse osmosis (RO) and electrodialysis (ED) systems, …

Design And Evaluation Of A High Temperature/Pressure Supercritical Carbon Dioxide Direct Tubular Receiver For Concentrating Solar Power Applications, Jesus Daniel Ortega

Open Access Theses & Dissertations

This work focuses on the development of a solar power thermal receiver for a supercritical-carbon dioxide (sCO2), Brayton power-cycle to produce ~1 MWe. Closed-loop sCO2 Brayton cycles are being evaluated in combination with concentrating solar power to provide higher thermal-to-electric conversion efficiencies relative to conventional steam Rankine cycles. High temperatures (923 - 973 K) and pressures (20 - 25 MPa) are required in the solar receiver to achieve thermal efficiencies of ~50%, making concentrating solar power (CSP) technologies a competitive alternative to current power generation methods. In this study, the CSP receiver is required to achieve an outlet temperature of …

Digitally Manufactured Spatially Variant Photonic Crystals, Javier Jair Pazos

Open Access Theses & Dissertations

Metamaterials and photonic crystals are engineered composites that exhibit electromagnetic properties superior to those found in nature. They have been shown to produce novel and useful phenomena that allow extraordinary control over the electromagnetic field. One of these phenomena is self-collimation, an effect observed in photonic crystals in which a beam of light propagates without diffraction and is forced to flow in the direction of the crystal. Self-collimation however, like many of the mechanisms enabled through dispersion engineering, is effective in directions only along the principal axes of the lattice. To this effect, a general purpose synThesis procedure was developed …

Synthesis, Microstructure And Performance Evaluation Of Gadolinium Incorporated Cobalt Ferrite Ceramics, Md Taibur Rahman

Open Access Theses & Dissertations

Spinel structured ferrites exhibit remarkable properties and phenomena, which are attractive for application in sensors and actuators, magneto-electronics, and electrochemical energy storage devices. Among spinel ferrites, cobalt ferrite CoFe₂O₄ (CFO) has attracted remarkable attention and widely studied because of their electro-magnetic properties, chemical stability and mechanical hardness. The properties and phenomena of CFO ceramics are dependent on microstructure and chemistry, which in turn depend on the synThesis processes and conditions employed for fabrication. Generally exact chemical composition, processing temperature, reactive or processing atmosphere (if any) and the ions that substitute Fe³⁺/Fe²⁺ ions dictate the …

Design And Development Of Implantable And Remote Controlled Distraction Osteogenesis Device For Limb Lengthening Practice In Children, Mario Eduardo Rodriguez De La O

Open Access Theses & Dissertations

Recent technology improvements have been positively affecting medical industry in recent years since procedures and equipment are more precise and reliable. Nevertheless, there are still surgical procedures and medical devices that not fully address specific needs according to medical experts. One of those necessities is focused on options available for children patients when subjected to a surgical procedure named distraction osteogenesis. In general, distraction osteogenesis is performed when skeletal deformities need to be corrected or when bone lengthening is required, typically a mechanism is utilized to elongate bone at a controlled rate. The existing osteodistraction methods for limb lengthening and …

Permit Tool: Development Of An Algorithm To Determine Performance Life Of Hma Mixes In Texas, Luis Alberto Torres Escobedo

Open Access Theses & Dissertations

A number of hot mix asphalt (HMA) types, such as permeable friction course (PFC), stone mastic asphalt (SMA), performance design mixes and conventional dense graded mixes are currently used to construct or overlay Texas roads. One of the important inputs into current pavement design programs used by the Texas Department of Transportation (TxDOT) is the performance lives of HMA mixes. To determine the best mix type for a particular job or to analyze the performance of a mix or a road, a new system can be developed to rationally quantify the HMA mix performance. This system must have access to …

An Experimental Investigation On Liquid Methane Convection And Boiling In Rocket Engine Cooling Channels, Abraham Trujillo

Open Access Theses & Dissertations

In the past decades, interest in developing hydrocarbon-fueled rocket engines for deep spaceflight missions has continued to grow. In particular, liquid methane (LCH4) has been of interest due to the weight efficiency, storage, and handling advantages it offers over several currently used propellants. Deep space exploration requires reusable, long life rocket engines. Due to the high temperatures reached during combustion, the life of an engine is significantly impacted by the cooling system's efficiency. Regenerative (regen) cooling is presented as a viable alternative to common cooling methods such as film and dump cooling since it provides improved engine efficiency. Due to …

Predicting Propylene Loss With Inferential Model Development Using Design Of Experiments (Doe) And Historical Data, Jeffrey Allen Wheeler

Open Access Theses & Dissertations

Inferential models are a highly researched topic as the science of digital automation becomes more prevalent as information is in abundance. Welldeveloped inferred models can augment the use of analyzers in steady state processing and highly correlated ones can even replace online analytics. The use of design of experiments (DOE) inferred models with historical process data and a rigorous plant simulator can reduce the case study duration while achieving a high degree of accuracy. This paper uses surface response and full factorial models as the first step in model development, and then uses actual historical plant data to create a …

The Interfacial Fracture Of Bonded Materials And Composites, Kai Zhao

Open Access Theses & Dissertations

Adhesive bonding and composite materials have been widely used in manufacturing industry. Failure results from the weakest link in a structure and this is often the interface between two materials. In case of composites, it becomes the fiber and matrix interface. In case of bonded polymers, the bonding line is the interface. This Dissertation is focused on the interfacial fracture of bonded materials and composites. First, a systematic experimental investigation on adhesive bonding strengths of polymer/polymer and polymer/metal joints was conducted and the experimental results were compared with other researchers' work. Then, a modified short-beam shear approach is developed to …

Enhanced Finite Element Modeling Of The Thermo-Mechanical Responses Of Jointed Pcc Pavements Under Environmental And Traffic Loads, Mohammad Ali Zokaei Ashtiani

Open Access Theses & Dissertations

Jointed plain concrete pavements (JPCP) are the most commonly used type of rigid pavement systems and the accurate modeling of their thermo-mechanical responses is of primary importance in a mechanistic-empirical pavement design procedure. In JPCP, the temperature gradient and resulting slab shape play a crucial role in the magnitude of stresses and deflections caused by the superimposed traffic loads. Temperature gradients through the slab depth can produce thermal curling in slabs and can also produce slab expansion and contraction, which leads to the generation of frictional tractions between slabs and foundation. The prediction of these frictional tractions is complicated by …

Frequency Selective Surfaces For Extreme Applications, Jay Houston Barton

Open Access Theses & Dissertations

It is known that for high-power microwaves and other extreme environments, the use of resonant metallic elements in frequency selective surfaces can be problematic. The solution developed within this Dissertation to solve these problems was to use guided-mode resonance phenomenon to create all-dielectric frequency selective surfaces that could survive these extreme environments.

To fully understand how these devices work, three different computational electromagnetic methods are formulated and implemented. The formulation of these methods start with the differential form of Maxwellâ??s equation and are derived all the way down to the final simulation state. This is done sequentially and all the …

Development Of A Variable Stiffness Locally Adjustable And Repairable Low-Cost Energy Storage And Return Carbon Fiber Prosthetic Foot: A Feasibility Study, Joshua Scott Bowen

Open Access Theses & Dissertations

Background: Energy storage and return (ESAR) prosthetic feet were developed to improve the mobility and function of lower-limb amputees. Amputees in the Developing World amputees lack this technology. Most current Developing World prosthetic solutions do not adequately address the needs of active amputees and were not designed to pass international standard tests. Developing a low-cost, repairable, adjustable, energy storage and return prosthetic foot would close this technological gap and improve the mobility and function of active amputees. The goal of this research is to determine the feasibility of fabricating a low-cost, adjustable, ESAR, repairable prosthetic foot manufactured from carbon fiber …

3d Printed Spatially Variant Anisotropic Metamaterials, Cesar Roman Garcia

Open Access Theses & Dissertations

The recent advancement in 3D printing has created a new way to design electronics and electromagnetic devices. This allows for a new breed of non-planar designs to be used, fully exploiting all three dimensions like never before. More functions can be fit into the same amount of space, products with novel form factors can be more easily manufactured, interconnects can be routed more smoothly, interfaces can be better implemented, electrical and mechanical functions can be comingled, and entirely new device paradigms will be invented. When departing from traditional planar topologies many new problems arise like signal integrity, crosstalk, noise, and …

A Study Of Ti-Doped Wo3 Thin Films Using Comparative Theoretical And Experimental Approach, Aurelio Paez

Open Access Theses & Dissertations

Metal oxides like Tungsten Oxide (WO3) are well documented and characterized in the literature, with uses in darkening windows and mirrors, flat computer displays, solar panel cooling, and sensors (of interest in this study). Ti doping of WO3 is less documented and the focus of this study. Sample thin films of pure WO3 and varyingly Ti doped WO3 were prepared using Radio Frequency magnetron sputtering (RF) (13.56 MHz) to grow thin films on a silicon substrate. This study aims to compare multiple Ti doping percentages in WO3 theoretically and then compare with experimental data taken from thin films of various …

Use Of Cosine Modulated Filter Bank To Quantify Human Muscle Fatigue Using Electromyography Signals Obtained During Isometric Voluntary Contractions, Liza Stephanie Rodriguez

Open Access Theses & Dissertations

As technology continues to advance, there continues to be an interest in applying engineering theories to solve medical problems. Technology has allowed researchers to investigate the properties and characteristics of the human body in hopes of emulating their complexities. The rising interest in the study of biopotentials for use in prosthetic limbs, exoskeletons and machine interfacing has led to a necessity to validate that the understanding of these signals is accurate. The study of biopotentials generated by muscles via a method known as electromyography (EMG) has improved the understanding of effects of rehabilitative treatments, assisted in diagnosing diseases, control of …

Effect Of Multi-Tube Injector Geometry On Flame Stability And Nox Emission In A High Pressure Gas Turbine Combustor, Sudipa Sarker

Open Access Theses & Dissertations

Future generation gas turbine combustors for power production are expected to have the capability of operating on high hydrogen content fuels. To ensure the implementation of high hydrogen content (HHC) fuel in a power generation unit without negotiating with operational or emission advantages, the study of the flame stability regime and behavior of (HHC) fuel under gas turbine condition leads to the necessity of the development of an optically accessible high-pressure combustor. This Dissertation first presents the design of an optically high-pressure combustor facility based on 500 kW power and 1.5 MPa pressure which is the representative pressure of a …

Evaluation Of Ozone Trends In Southern Doña Ana County, New Mexico Thru Wind Rose Analysis And Use Of Noaa Hysplit Model, Maria Aurelia Sisneros

Open Access Theses & Dissertations

The objective of this study was to determine whether increasing ozone concentrations in 2012 and 2013 at the Santa Teresa air quality monitor in Doña Ana County, New Mexico were due to a local point source impacting this monitor only or part of a regional phenomenon that affects all the monitors within the Paso del Norte Region. In addition, the study focused on identifying local and regional/long-range source areas contributing transport ozone to the study area (southern Doña Ana County).

The study showed that increasing ozone levels were not unique to the Santa Teresa monitor due to the fact that …

Transatlantic Maritime Transportation Between The Czech Republic And The United States, Petr Toman

Open Access Theses & Dissertations

Maritime transportation is the backbone of today´s world trade and therefore there special attention should be paid to all subjects concerning this mode of transportation. It is also necessary to complement maritime transportation by other modes, such as rail and/or truck (road). This thesis deals with the problems of maritime transportation and provides the summary of recent developments, trends and statistics mainly on Transatlantic maritime routes (Europe to U.S.). Besides maritime transportation, this thesis also reviews the trends and statistics of rail and truck (road) transportation in U.S. and Europe.

The second part of thesis seeks to create a mathematical …

An Experimental Investigation Of The Cooling Channel Geometry Effects On The Internal Forced Convection Of Liquid Methane, Adrian Trejo

Open Access Theses & Dissertations

Rocket engine fuel alternatives have been an area of discussion for use in high performance engines and deep spaceflight missions. In particular, LCH4 has showed promise as an alternative option in regeneratively cooled rocket engines due to its non-toxic nature, similar storage temperatures to liquid oxygen, and its potential as an in situ resource. However, data pertaining to the heat transfer characteristics of LCH4 is limited. For this reason, a High Heat Transfer Test Facility (HHTTF) at the University of Texas at El Paso's (UTEP) Center for Space Exploration Technology and Research has been developed for the purpose of flowing …

Sustainable Public Transportation In Large Cities: Demand Estimation, Tadeas Umlauf

Open Access Theses & Dissertations

Public transportation helps to decrease the negative externalities caused by people's mobility. In many countries, the total number of vehicles and traffic has risen many times in the last decades but there is limited space to improve infrastructure in the cities. Large cities all over the world have a lot of issues with congestion, traffic noise, emission of greenhouse gases, and accidents. According to many international examples, sustainable public transportation in combination with synergistic projects (park & ride, kiss & ride, bike & ride) can help to overcome these issues. Therefore new transit modes and routes have been implemented in …

A Robust Algorithm For Estimating The Balance Of Autonomic Nervous System With Application To Mental Fatigue Detection Using Photoplethysmographic (Ppg) Signals, Ajay Kumar Verma

Open Access Theses & Dissertations

Spectral- and time-domain analysis of Heart Rate Variability (HRV) signal is widely used as a quantitative marker of the Autonomic Nervous System (ANS) activity. A robust algorithm was developed to derive HRV from photoplethysmographic (PPG) signals, to compute FFT- and AR-based spectra of these HRV signals, and to determine time- and frequency-domain features. This algorithm has detrending, sample-rate reductions, false-peak removal, automatic peak detection, peak-to-peak (P-P) interval detection and correction, time-domain feature extraction, HRV signal generation, and spectral-domain feature extraction from the HRV signal. Adapting to the very low spectral contents of the input PPG signal is very helpful in …