Engineering Commons^™

Gfrp Reinforced Bridge Barriers: Experiment Testing, Manish Kumar Gadhe

Masters Theses

This study focused on evaluating the performance of concrete bridge barriers reinforced with Glass Fiber Reinforced Polymer (GFRP) compared to those reinforced with conventional mild steel. Four full-scale barriers were constructed, three using GFRP bars as the reinforcement and one with mild steel reinforcement. These were cast on two concrete slabs to ensure consistent support conditions. The use of GFRP aims to address durability concerns associated with steel reinforced concrete (RC), particularly corrosion of these bars in harsh environments.

To simulate real-world impact scenarios, a weighted cart was launched at each barrier using a guided sled system. Sensors, including load …

Extraction And Separation Of Metal Cations From Synthetic Acidic Solutions Using Emulsion Liquid Membrane, Nouhaila Filali

Masters Theses

The work is organized into two main papers supported by experimental and comparative studies using Emulsion Liquid Membrane (ELM) systems. The first paper explores the individual extraction of heavy metals (Cd, Cr, As, Ni) from synthetic phosphoric acid using Alamine 336 and D2EHPA as carriers. Alamine 336 achieved the highest extraction efficiency (>90%) and stability, offering a promising route to reduce toxic impurities in fertilizer-grade acid. The second paper examines the selective separation of Ni2+ and Co2+ from various acidic solutions using the ELM configuration. Systematic variation of carriers, stripping agent and feed acidity, clarified transport mechanisms and stability, …

Application Of Edge-Enhanced Phase Analysis To Active Microwave Thermographic Measurements, Douglas Blaine Fleetwood

Masters Theses

Nondestructive testing and evaluation (NDT&E) encompasses a range of inspection techniques that assess materials, components, and structures while maintaining their integrity and performance. Among these techniques, thermography is particularly attractive due to its non-contact imaging approach with easy-to-interpret results. Active Microwave Thermography (AMT) has emerged as a promising NDT&E inspection technique that utilizes electromagnetic energy to heat materials through dielectric and magnetic absorption, with subsequent infrared imaging used to detect subsurface defects. While AMT offers significant advantages including material-specific heating optimization and lower power requirements compared to conventional thermographic methods, the technique faces a persistent challenge related to the thermal …

Biological Computing From Microscopic To Macroscopic Evolution, Xiaofeng Ding

Masters Theses

A unified theory from microscopic to macroscopic DNA-based biological systems is explained in terms of the rule components used when the system size is increased. Even though the eight female rules in each ruleset are provided with an equal probability of the computation-state outcomes, the initial ensemble of the computation states will exponentially settle into one dominant rule that supports the nutrition needed for growth. The remaining seven rules form into two minority groups to provide the biological characteristics of the system's growth from a micro to macroscopic evolution. The object of this study is to prove that such a …

Sustainable Hemp Industrial Panels (Ship) And Its Industrial Possibilities For The Replacement Of Oriented Strand Board (Osb), Anthony Ollins

Masters Theses

This study explores the feasibility of using industrial hemp fiber to create composite panels—termed Sustainable Hemp Industrial Panels (SHIP) as a potential competitor for oriented strand board (OSB), a commonly used structural wood product. Given hemp's historical and environmental advantages, including rapid growth, carbon sequestration capacity, and material strength, this research investigates its performance when combined with Urea-Formaldehyde (UF) resin, and in a hybrid form with Southern Yellow Pine (SYP). Two hemp-based composites were produced and tested: one with hemp and UF, and another with hemp and SYP. Using a custom-built hydraulic press, composite panels were fabricated and subjected to …

Development Of Titanium Dioxide Coating For Self-Cleaning Photovoltaic Panels, Chau Pham

Masters Theses

As global energy demands continue to rise amid increasing environmental concerns, the transition to renewable energy sources, particularly solar power, has become imperative. Solar energy, driven by recent advancements in photovoltaic (PV) technology, presents a promising solution for achieving greater sustainability and efficiency. However, despite these technological advancements, the persistent issue of soiling caused by dust, bird droppings, and other contaminants remains a major obstacle, diminishing sunlight absorption and reducing energy conversion efficiency, presenting a significant obstacle to optimal PV performance.

This study explores the application of titanium dioxide (TiO2) nanoparticle coatings to address this challenge by enhancing the self-cleaning …

Co2 Capture Utilizing Novel Deep Eutectic Solvents: Modeling, Process Simulation, And Cost Analysis, Nazneen Aspi Kolah

Masters Theses

One of the most pressing global issues that humans face is climate change caused by anthropogenic greenhouse gas emissions, especially carbon dioxide (CO2). Conventional solvents utilized for CO₂ capture, such as amines, are widely used in industrial applications due to their high CO2 absorption capacity. However, deep eutectic solvents (DES) have attracted a lot of academic attention recently due to their biodegradability and low energy for regeneration.

This research serves as a foundational proof-of-concept for using DESs in industrial gas separation processes. Five DES are evaluated for CO2 removal from flue gases. Aspen Plus is utilized to simulate the performance …

Assessment Of Pedestrian Safety At Roundabout Slip Lanes: A Study On Design Configurations And Surrogate Safety Measures, Norran Kakama Novat

Masters Theses

The implementation of slip lanes at roundabouts has been widely adopted to improve traffic flow and reduce vehicle conflicts. However, the presence of slip lanes introduces significant risks for pedestrians, influencing vehicle speeds, merging behaviors, and increasing the potential for pedestrian-vehicle conflicts. This study investigates pedestrian safety at roundabouts with various slip lane designs, focusing on their impact on vehicle speeds, pedestrian-vehicle conflicts, and yielding behavior. Also, the study evaluates commonly used surrogate safety measures by employing extreme value models to assess their efficiency.

The study addresses two primary objectives: (1) analyzing the effects of different slip lane configurations on …

A Novel Interpretation Of Average Run Length For Assessing The Performance Of Control Charts, Gonçalo Sousa

Masters Theses

The Average Run Length (ARL) is a performance measure of Control Charts widely used within Statistical Process Control. In this study we propose a new approach for the computation of the ARL that is based on a novel interpretation of out-of-control signals produced by a Control Chart. Specifically, out-of-control signals used to calculate traditional ARLs may correspond to Type I errors and may not reflect a Control Chart’s true performance. To compensate for this issue, for Shewhart and EWMA charts, constraints are applied to the calculation of ARLs so that only out-of-control signals that occur when the corresponding statistic is …

Design Of A Portable Fast Scan Cyclic Voltammetry Device Utilizing Pulse Width Modulation For Waveform Generation, Nora Szymkowski

Masters Theses

Fast Scan Cyclic Voltammetry (FSCV) is a widely used electrochemical technique for real-time measurement of the brain’s chemical messengers, including the molecule dopamine, with high temporal resolution. Currently the financial burden of performing FSCV is quite high, ranging from $8,000 to $20,000+ making the barrier to entry nearly insurmountable for laboratories and classrooms at small institutions. The purpose of this project was to develop a Do-It-Yourself (DIY), portable, and cost-effective FSCV system for use in laboratory and classroom settings. The project aimed to create a compact and cost-effective system that could be used by researchers and educators to study dopamine …

A Pilot Study Comparing Muscle Activation And Kinematic Parameters Between Professional And Non-Professional Tennis Players, Anton S. Petrenko

Masters Theses

Tennis, a widely played sport across various age and skill groups, prompts continual skill improvement among competitive players seeking a competitive edge. This study explores two approaches for enhancing playing style: motion capture (MoCap) and surface electromyographic (sEMG) signals. The study addresses a gap in simultaneous examination of MoCap and entire dominant leg muscle activation, particularly concerning the influence of skill level and gender on various tennis strokes. To fill this void, the research records and analyzes MoCap and dominant leg sEMG data during serves and strokes on both court sides. The hypothesis posits differences in muscle activation and body …

Wild Joy: An Exploration In Queer Spatial Dynamics, Kipper Thomas Reinsmith

Masters Theses

What does it mean to feel represented in a space?

What does a trans space look like?

How can we queer our interior spaces?

Our world is crafted by the many designers that have come before us. These systems, products, and spaces are built upon assumptions of the bodies that will use and occupy them—namely cisgender, able-bodied, straight folks.

Designing and creating objects as a trans person is an act of radical nature. To take up space, to design for trans luxury, for the sake of beauty, for joy itself, feels counterintuitive to the narratives we’ve been served: that of …

Technocene, Vir Joseph Naidu

Masters Theses

Embodied human communication within the Anthropocene. Existing at the intersection of technology, and the body.

The design industry has developed technology that is, paradoxically, isolating. The exposure to a vast audience in the digital sphere has introduced new societal pressures, leading to a disconnection from our immediate surroundings, detached, and donning metaphorical masks. Technocene lives on the fringes of the discipline by blending conceptual thinking with practical application. Through curious, experimental artifacts, it prompts us to shed our masks and embrace vulnerability. Technocene endeavors to reimagine the human experience by acting as a discursive design project. It probes the boundaries …

Waste Illuminates Worlds: Printed Modular Lamp Design Based On Brick And Clay Tile, Yechen Zhu

Masters Theses

The building industry in the New England area is often in a state of entropy, with abandoned brick buildings contributing to urban decay. The recycling rate of brick and clay tile wastes generated by construction and demolition is only 12.2%, meaning the majority is sent to landfills. The expansion of landfills can lead to significant environmental and community challenges, including increased traffic from waste transport, habitat destruction, ecosystem degradation, and contributions to climate change. Specifically, the Bethlehem landfill in New Hampshire, which is planned to undergo a 5.71-acre lateral expansion through 2026, has already encountered issues such as leachate spills …

Naturify 2300, Yarina Yiwei Dai

Masters Theses

In my art practice, I explore the interplay between human desires to manipulate and anthropomorphize nature, as seen in the technological augmentation of plants and living entities. This investigation delves into how this intersection, alongside empathy towards these creations, contributes to fears of uncontrollability and the risks of addiction and excessive dependence on technology.

Bioengineering and genetic modification have cultivated unprecedented developments, allowing humans to manipulate the fundamental building blocks of life. My research speculates on this technology further, modifying the genetic code of organisms and creating bioengineered wearable entities with enhanced traits or entirely new functionalities. The primary objective …

Architecture As A Carbon-Based Practice, Qixin Yu

Masters Theses

Carbon serves as both a silent protagonist and a looming antagonist in the narrative of architecture, shaping not only the physical structures we inhabit but also the ecological legacy we leave behind.

Centuries of human exploitation of the environment have led to climate and material crises. Shifting this dynamic requires action at micro (matter), meso (material), and macro (materiality) levels. Biogenic materials offer significant potential for carbon sequestration and present opportunities for the building industry to collaborate with nature rather than merely extract from it.

This thesis establishes a research and manufacturing practice that prioritizes material innovation, carbon sequestration, environmental …

Potential Impact Of Proposed Medical Device On Hospital Acquired Anemia, Sam Menzie

Masters Theses

Evacuated tubes are the industry standard for drawing blood and have improved phlebotomist and patient safety as well as paved the way for laboratory automation. Current practices using evacuated tubes do not allow caregivers to control the volume of blood drawn, leading to blood waste in hospital settings. This overdrawing of blood has led to the prevalence of iatrogenic anemia, or hospital acquired anemia (HAA). HAA represents a significant risk to patients, leading to increased adverse conditions, and a higher consumption of hospital resources. This study seeks to model the efficacy of a potential new medical device. The proposed device …

Development Of Protocol To Evaluate The Effectiveness Of The Labor Assist Device, Samantha M. Spurr

Masters Theses

The Labor Assist Device (LAD) was designed to reduce the muscle fatigue experienced by women during childbirth to decrease the number of unnecessary cesarean deliveries and injuries to nurses. The purpose of this thesis is to develop a protocol for a future study to assess the effectiveness of the LAD at reducing muscle fatigue. While multiple parameters were investigated in this pilot study, the major parameter needed to develop the future protocol is the muscle fatigue rate in women contracting their muscles to simulate pushing during labor. The muscle fatigue rates are estimated in this study using a surface electromyography …

Design And Simulation Of Flow Channel Of Polymer Electrolyte Membrane Fuel Cell (Pemfc), Rishya Shringhan Ravichandran

Masters Theses

In Polymer Electrolyte Membrane Fuel Cell (PEMFC), flow channel plays an important role on the performance of the cell. This study mainly focuses on the simulation of flow channel under various conditions. A three-dimensional mode of PEMFC with 25cm² of active area was employed to simulate the flow channel of PEMFC which has various designs. The flow channel designs such as single serpentine, bi-serpentine and tri-serpentine channels were investigated using ANSYS FLUENT software. Initially, the flow channel width of 2mm was examined. The obtained results were compared to the experimental data to validate the model. Then, the dimension of …

Segregation And Heat Treatment Response Of Cast Quench And Partition Steels, Mujeeb Hussain Shaik

Masters Theses

Quench and partition (Q&P) steels have emerged as promising alternatives to traditional quenching and tempering methods, offering a superior balance of strength and ductility due to their unique microstructure of martensite, and retained austenite. This literature review examines the development and optimization of Q&P steels, focusing on their mechanical properties, heat treatment processes, and applications in various industries. This study explores the application and effectiveness of the Quench and Partition (Q&P) heat treatment process on cast steels and examines segregation phenomena in cast medium Mn steels. Medium Mn steels were employed for various Q&P cycles on cast specimens to investigate …

Obliquely Impinging Jet Heat Transfer Fields: Effects Of Mach Number On Nozzle-To-Plate Distance, Thinnesh Ragupathy

Masters Theses

This study investigates the consistent features of heat flux patterns on surfaces impacted by jets at various Mach numbers, ranging from 0.1 to 1.0. It utilizes temperature-sensitive paint (TSP) analysis to examine how these patterns change. The research also explores the presence of self-similarity in both the fluctuation of heat flux and skin friction patterns, which are derived from temperature and heat flux data. A semi-empirical model is proposed to explain this self-similarity, suggesting that Mach number primarily affects heat flux patterns through the recovery temperature at the impact site.

Understanding the self-similarity of heat flux patterns across different Mach …

Diagnosing Discharge Events Within A Novel Miniature Simplified Coaxial Ion Trap Mass Analyzer, David Virgil Sirbescu-Stanley

Masters Theses

Mass spectrometry is a technique that organizes material samples by mass to reveal their chemical composition by forming a spectrum. Since their invention, ion trap mass spectrometers have undergone significant enhancements. This work, funded by the National Science Foundation and in collaboration with Brigham Young University, the Simplified Coaxial Ion Trap (SCIT), attempts to simplify ion trap geometry and combine three ion traps into one device. Successful demonstration of the SCIT functionality could reduce costs, reduce manufacturing complexity, and shrink total instrument volume. At the same time, trapping capacity and analytical efficiency will be increased. However, as discussed within, challenges …

Fe-Ni-Cu-Pge Sulfide Transport Mechanisms And Carbon-Sulfur Interactions In Lower Crustal Magmatic Settings: A Study From The Valmaggia Ultramafic Pipe, Ivrea-Verbano Zone, Italy, Shelby Leann Clark

Masters Theses

"Constraining the processes that control the transport and deposition of sulfides in the deep lithosphere is an important step in expanding ore deposit exploration search space to include exhumed lower crustal rocks. The ultramafic sulfide ore-bearing Valmaggia pipe in the Ivrea-Verbano Zone of NW Italy, an exhumed cross section of the overlying lower continental crust and subcontinental lithospheric mantle, gives critical insight into metallogenic processes in lower crustal settings. The ~300 m wide metasomatized pipe hosts Fe-Ni-Cu-(PGE±Co±Au) sulfide mineralization that is commonly associated with locally abundant carbonates and hydrous silicates (phlogopite, amphibole). Previous studies suggested that sulfides were physically transported …

Iterative Power Flow Control Architecture For Dc-Ac-Ac Triple Active Bridge Converters: Design, Simulation, And Hardware Testing, Jonathan Henri Saelens

Masters Theses

Driven by widespread electrification and escalating energy demands, efficient and cost-effective converter systems are necessary to maintain and improve our nation's electrical grid. Facilitating this necessity are power electronic converters in applications such as smart grids, renewable energy integration, and electric vehicles. Guided by the demand for improved converter topologies and conversion efficiency, much research has been conducted on varying designs, development, and control implementations. One such topology gaining significant research attention is the triple active bridge (TAB) converter. The TAB is a three-port power converter enabling both bidirectional power flow on each port and galvanic isolation for safety and …

Characterization Of The Kansas River Alluvial Aquifer Using Towed Transient Electromagnetic Geophysical Method, Jonathon Daniel Voss

Masters Theses

"Forecasted urban development areas west of Kansas City, Kansas in the coming decades has caused an increase of research into water resources (Butler et al. 2022). A location of investigation has been the Kansas River Alluvial Aquifer (KRAA) for shallow ground water resources. To investigate the KRAA structure and grain texture, the towed transient electromagnetic system (tTEM) in conjunction with direct push electrical conductivity logs and lithology wells were used to investigate four locations between Lawrence and Manhattan, Kansas. In total, 110 line-kilometers of tTEM data was collected. The tTEM data collected were high quality and through inversions of the …

Dig Limits Optimization Using Binary Integer Linear Programming Method In Open Pit Mines, Hussam Naif Altalhi

Masters Theses

"Dig limits optimization is the process for classifying different materials (e.g., ore, stockpile material, and waste) into appropriately sized contiguous zones for open pit mining. The efficient determination of dig-limits is crucial for profitable and sustainable resource extraction in mining. Previous research has focused on defining dig-limits manually or using optimization approaches, but these methods are limited to only handling two material destinations (ore and waste). Thus, there is a need for operations research methods that consider the selectivity of mining equipment and can optimize dig-limits for metal mining operations with more than two material destinations. Consequently, the objective of …

Validation Of Athlet With Purdue University Multi-Dimensional Integral Test Assembly (Puma) Test, Emin Fatih Ozdem

Masters Theses

"Following the Three Mile Island Unit 2 (TMI-2) disaster, the development of a diagnostic system for emergency situations in a nuclear power plant was identified as an essential research area to strengthen the safety of nuclear power plants. A real-time estimation system of vital safety parameters on the main side of a PWR (Pressurized Water Reactor) facility was investigated since precise post-event scenario estimations are thought to be a crucial component of the diagnostic system. The alarm system of the plant can detect an SB-LOCA (Small Break Loss-Of-Coolant-Accident), but there were a couple of potential long-term transient occurrences. The accident …

High Strain Rate Analysis Of 3d Printed Concrete As Compared To Conventionally Cast Concrete, Weston Mcleod Thomsen

Masters Theses

"3D Printed Concrete (3DPC) is a developing method of construction that has advantages over conventional methods, including formwork reduction, complex geometry, and expedited construction. This technology has potential benefits for the military when considering the austere environments that forward operating bases are built in. This study aims to assess 3DPC applications in protective structures that protect critical assets from explosive blasts. These protective structures experience a high-strain rate response during blast loading of the structure, and the effects of this have yet to be analyzed in the literature concerning 3DPC. With the lack of prior research, the focus here will …

Fiber Assisted Re-Assembly Preformed Particle Gel For Conformance Control, Zhe Sun

Masters Theses

"In Enhanced Oil Recovery technology today, gel treatments have been implemented as a cost-effective method to improve the oil sweep efficiency in reservoirs by plugging the high permeability zones. This study presents a novel gel composition to be used in conformance control in order to improve oil recovery for mature oilfields.

The product is a fiber-assist re-assembly preformed particle gel which could be generalized to the preformed particle gels (PPG). The product developed in this study could be injected into the reservoir act as a conformance control agent by plugging water thief zones and channels in the beginning process. Due …

Investigation Of The Relationships Between Hydraulic, Physical, And Biological Soil Parameters At A Vineyard In Saint James, Missouri, Lyndsey Bennett

Masters Theses

"Soil is a living, dynamic system that performs vital functions such as crop production, organic matter decomposition, and the flow and transport of water. Given the pressures of food and in some locales water security, climate change, and sustainability, farmers, scientists, and other related specialists and stakeholders must have access to understandable soil health indicators as well as the soil hydraulic function parameters to maximize crop growth while maintaining soil health. Although biological and physical soil parameters are different, we aim to evaluate their relationship at the field scale. Hydraulic conductivity in the vadose zone may be especially important, as …