Engineering Commons^™

Novel Approaches For Efficient Stochastic Computing, Ramu Seva

Masters Theses

"This thesis is comprised of two papers, where the first paper presents a novel approach for parallel implementation of SC using FPGA (Field Programmable Gate Array). This paper makes use of the distributed memory elements of FPGAs (i.e., look-up-tables -LUTs) to achieve this. An attempt has been made to build the stochastic number generators (SNGs) by using the proposed LUT approach. The construction of these SNGs has been influenced by the Quasi-random number sequences, which provide the advantage of reducing the random fluctuations present in the pseudo-random number generators such as LFSR (Linear Feedback Shift Register) as well as the …

Comparison Of ²⁵²Cf Time Correlated Induced Fission With Amli Induced Fission On Fresh Mtr Research Reactor Fuel, Jay Prakash Joshi

Masters Theses

"The effective application of international safeguards to research reactors requires verification of spent fuel as well as fresh fuel. To accomplish this goal various nondestructive and destructive assay techniques have been developed in the US and around the world. The Advanced Experimental Fuel Counter (AEFC) is a nondestructive assay (NDA) system developed at Los Alamos National Laboratory (LANL) combining both neutron and gamma measurement capabilities. Since spent fuel assemblies are stored in water, the system was designed to be watertight to facilitate underwater measurements by inspectors. The AEFC is comprised of six ³He detectors as well as a shielded …

A Comprehensive Analysis Of Lost Circulation Materials And Treatments With Applications In Basra's Oil Fields, Iraq: Guidelines And Recommendations, Husam Hasan Alkinani

Masters Theses

"Lost circulation materials (LCM's) have been widely used to avoid or stop losses. Due to a large number of current available LCM's and their different applications, classification of LCM's is very important. The most recent LCM classification was published around 50 years ago, and this paper intends to fill this gap with an updated classification including conventional and new technologies. Lost circulation materials and treatments are re-classified into various categories based on their appearance, applications, chemical and physical properties.

Wells in Basra's oil fields are highly susceptible to lost circulation problems when drilling through the Dammam, Hartha, and Shuaiba formations. …

Predicting The Impact Of Data Corruption On The Operation Of Cyber-Physical Systems, Erik David Burgdorf

Masters Theses

"Cyber-physical systems, where computing and communication are used to fortify and streamline the operation of a physical infrastructure, now comprise the foundation of much of modern critical infrastructure. These systems are typically large in scale and highly interconnected, and span application domains from power and water distribution to autonomous vehicle control and collaborative robotics. Intelligent decision support in these systems is heavily reliant on the availability of sufficient and sufficiently correct data. Failure or malfunction of these systems can have devastating consequences in terms of public safety, financial losses, or both.

The research described in this thesis aims to predict …

Liquid Pulsed Plasma Thruster Plasma Plume Investigation And Mr-Sat Cold Gas Propulsion System Performance Analysis, Jeremiah Daniel Hanna

Masters Theses

"The plasma plume produced by a liquid pulsed plasma thruster is investigated using a Langmuir triple probe and a nude Faraday probe. The Langmuir triple probe failed to produce results which are suspected caused by the presence of ionic liquid in the plume resulting in shorting of the probe. The nude Faraday probe is able to record the ion current density which revealed a high level of inconsistency in the plasma plume. Ion current density recorded by the nude Faraday probe had a relative standard deviation of upwards of 100% of the mean value. Controlling the amount of propellant used …

Classification Of Basal Cell Carcinoma Using Telangiectatic Vessels And Machine Learning, Hemanth Yadav Aradhyula

Masters Theses

“Basal cell carcinoma (BCC) is one of the most common types of skin cancer in the United States. Early detection of BCC by noninvasive techniques can decrease delay in treatment and save cost. A recent study estimated that 5.4 million cases of non-melanocytic skin cancer (NMSC) occur each year in the US. BCC accounts for 50% of NMSC cases. Telangiectasia, which appears in most BCCs is an important feature for identification of BCC for an automatic diagnostic system. In this thesis, three methods for detection of telangiectasia present in dermoscopy lesion image (DI) were proposed. Detected telangiectasia in DI was …

In-Situ Control Of Substrate Temperature In Additive Manufacturing To Homogenize Micro-Hardness Of Laser Clad Deposits Using Thermo-Electric Cooling, Raghu Ram Kolla

Masters Theses

”Nickel hard-surfacing alloys are replacing hard Chromium coatings due to their excellent wear and corrosion-resistant properties. In laser cladding of these alloys, however, these properties can vary across the height of the deposit due to an accumulation of excess heat generated in the deposit during the process. This may result in uneven wear of the clad parts which can be detrimental for practical purposes. The research objective is to develop an in-situ cooling system that works in line with the laser deposition system to extract the excess heat buildup and reduce the variation in the hardness of the Ni-based clad …

Error Mapping Of Build Volume In Selective Laser Melting, Ninad Kulkarni

Masters Theses

“Selective laser melting is one of the commonly used additive manufacturing processes employed for production of functional part. Therefore, quality aspects such as dimensional accuracy have become a point of great interest. Like all of the other additive manufacturing processes selective laser melting process suffers from the issue if having wide range of process parameters making the process control a complex task. Additionally, issues specific to the selective laser melting process such as position dependency of accuracy of the part, makes it difficult to predict the resulting dimensional inconsistencies in the part manufactured by this processes. This research is an …

A Study Of The Potential Applications Of Am241, And Determining The Feasibility Of Using Gamma Spectroscopy For Future Physical Validation, Eric A. Feissle

Masters Theses

“Am241 is typically produced via Pu241 decay in a uranium fueled reactor. Presence of Am241 can be used as the age estimation tool for spent fuel, which is a focus of this thesis along with the interest of the measurement and the ratio of production rates of Am241’s activation products; Americium-242 and its first excited state of Americium-242m. MCNP models of the core and BEGe 3825 detector were built. These models were compared with established and physical measurements of gamma/x-ray standards that were available at the reactor. Thermal fluxes at 200 kW for potential foils centered in the source holder …

An Investigation Of Borax For Sealing Inflow From Berea Sandstone, Tri-Tris Bao Nguyen

Masters Theses

"Well inflow control is a major challenge for the oil and gas industry. Erle Haliburton revolutionized well inflow control with his patent for cementing oil wells in 1921. Soon after, cement became the accepted material to establish well integrity and has been ever since. Cement is used in all phases of the well life cycle, and it is expected to hold indefinitely once set. Yet based on the nature of cement and the placement techniques, flow pathways may develop from improper cementing jobs or from cement degradation over time. Well integrity is especially crucial for wellbore plugging and abandonment, since …

Entropy-Based Performance Analysis Of Jet Engines; Methodology And Application To A Generic Single-Spool Turbojet, Mohammad Abbas

Masters Theses

"Recently developed methodology that provides the direct assessment of traditional thrust-based performance of aerospace vehicles in terms of entropy generation (i.e., exergy destruction) is modified for stand-alone jet engines. This methodology is applied to a specific single-spool turbojet engine configuration. A generic compressor performance map along with modeled engine component performance characterizations are utilized in order to provide comprehensive traditional engine performance results (engine thrust, mass capture, and RPM), for on and off-design engine operation. Details of exergy losses in engine components, across the entire engine, and in the engine wake are provided and the engine performance losses associated with …

Assessment Of Rockfall Rollout Risk Along Varying Slope Geometries Using The Rocfall And Crsp Software, Mariam S. Al E'Bayat

Masters Theses

"Most routes in mountainous areas suffer from rock falling, rolling and bouncing risk. There are many computer programs concerned with simulating the rockfall problem, and whereas they have the same purpose, they however differ in the input data that's needed to simulate the problem, and they also differ in the way of processing and kind of output.

This study used Rocfall® and the Colorado Rockfall Simulation Program (CRSP®) to simulate sixty-three models of varying slope geometry, where only the slope geometry is changed with the same material properties for both the slope and the rocks.

Both programs were fast and …

Evaluation Of Preformed Particle Gels Penetration And Propagation Behavior For A Conformance Control Treatment In Partially Open Conduits, Ahmed Mohamed Aldalfag

Masters Theses

"Preformed particle gels (PPGs) serve as a conformance control agent and have been used widely to control excess water production through conduits, fractures or fracture-like features. This research ranks the parameters that impact PPG resistance to water flow in partially opened conduits. Experiments were conducted to examine the effect of brine concentration, PPG injection pressure, back pressure, reducing water salinity and matrix permeability on PPG resistance to water flow through conduits, PPG penetration to the matrix. PPGs were swelled in different concentration brines and were injected into the conduits at a few designed injection pressures. PPG swollen in high brine …

Determination Of Significant Parameters That Drive Fracture Optimization In The Glauconite Formation, Southern Chile, Ghassan Saleh Mahdi Alqatrani

Masters Theses

"The Glauconite Formation in the Magallanes Basin of Southern Chile is a clay- and silica-rich formation with low permeability. As with many of the unconventional resources, the Glauconite Formation requires a hydraulic fracturing operation to enhance the productivity of the wells in this area.

Data and pertinent information of fracturing, completion, and reservoir quality parameters along with post-fracture production data were collected to initiate a database of nearly 70 wells, to be used to develop a better understanding of the fracturing behavior, optimize the well stimulation, and overcome the major barriers in the hydraulic fracturing of the Glauconite Formation. The …

The Viability Of Advantg Deterministic Method For Synthetic Radiography Generation, Andrew Albert Bingham

Masters Theses

"Time sensitive and high resolution image simulations are needed for synthetic radiography generation. The standard stochastic approach requires lengthy run times with poor statistics at higher resolutions. The investigation of the viability of a deterministic approach to synthetic radiography image generation was explored. The aim was to analyze a computational time decrease over the stochastic method. ADVANTG was compared to MCNP in multiple scenarios including a Benchtop CT prototype, to simulate high resolution radiography images. By using ADVANTG deterministic code to simulate radiography images the computational time was found to decrease over 10 times compared to the MCNP stochastic approach"--Abstract, …

Survey And Data Analysis Of Weak Gel Treatments In Injection Wells, Zhuxing Chen

Masters Theses

"Excessive water production is a major concern in mature reservoirs. Weak gels have been applied in injection wells for in-depth profile modification. However, the data range and distribution of each parameter that affects performance of weak gels have not been studied thoroughly.

China has the largest amount of chemical-based conformance control treatments. This paper presents a summary of comprehensive data ranges and distributions for weak gel treatments based on the laboratory experiments and field applications in China from 2001 to 2010. The data set includes 76 cases compiled from China Academic Journals papers. In this study, reservoir properties, gel properties …

Deformation Processes At The Leading Edge Of The Sevier Fold And Thrust Belt, Southwest Utah, William Joseph Michael Chandonia

Masters Theses

"Deformation processes leading to formation and abandonment of 'triangle zones' along the leading edge of the Sevier fold and thrust belt are investigated near Kanarraville, Utah through construction of a detailed geologic map and cross-section along Spring Creek. Here the eastern limb of the Kanarra fold, a Sevier structure, is well exposed along the Hurricane Cliffs due to uplift and erosion of the footwall of the Hurricane Fault. The east-verging Kanarra fold changes from upright to overturned within Spring Creek. Within the fold limb, parasitic folds, minor thrust faults, and duplex structures result in local tectonic overthickening of units and …

Towards A Better Understanding Of Indoor Exposure To Air Pollutants: Window Opening Occurrence In U.S. Residences, Gauri Dilip Date

Masters Theses

"Opening a window dramatically alters how we are exposed to air pollutants. Online questionnaire surveys were deployed to assess window-opening occurrence of the occupants of US homes. This information will be used to better quantify population exposure to pollutants of indoor and outdoor origin. Frequency distributions of demographics were generated which showed percentages of respondents who participated in the surveys from categories including gender, race, household income and occupancy. In April 2016, 49.3% of the people surveyed opened their windows for at least 1 hour in a day. This increased to 52.5% in September 2016 and reduced considerably to 24.4% …

Advanced Buffer Materials For Indoor Air Co₂ Control In Commercial Buildings, Pavithra Ethi Rajan

Masters Theses

"The following describes a novel passive approach to control the indoor CO₂ levels in enclosed spaces, primarily focusing on commercial buildings. Amine impregnated silica sorbents were identified as suitable candidates and synthesized; the amine loading ratio was varied to create a range of materials. These samples along with other commercial zeolite candidates have been tested over a range of CO₂ concentrations to determine the CO₂ adsorption capacity in laboratory systems and under simulated room conditions. The research work also focuses on the CO₂ desorption capacity of the candidate adsorbents. The desorption is allowed to occur gradually …

The Use Of Ceramic Water Filters Under Pressure In An In-Line Water Pumping System, Travis Dean Gardner

Masters Theses

"Ceramic pot filters (CPFs) have proven an effective point of use (POU) filter due to their relative low cost, ease to manufacture, and effectiveness at treating contaminated water. These filters are used by individual homes, and sometimes multiple filters are needed for each home in order to produce enough water for the family's household. If these filters could be used in-line with a pumping system or elevated storage tank, water could be filtered and used on demand for a community in an economically feasible way. However, CPFs are too fragile to use under pressure due to the weak points where …

Design And Analysis Of A Passive Heat Removal System For A Small Modular Reactor Using Star Ccm+, Raymond Michael Fanning

Masters Theses

"Next generation nuclear power plants, specifically small modular reactor designs, are the best alternative to fossil fuels for power generation due to their power density and low carbon emissions and constant awareness of safety concerns. A promising safety feature of new designs is the removal of heat by passive systems in accident scenarios. The passive systems require no moving parts and no intervention by personnel. These systems must be accurately simulated for better understanding of the heat transport phenomena: natural convection cooling. Due to the fact that most work developing these passive heat removal systems are proprietary information, a passive …

Micro-Grid Implementation Of A Rooftop Photovoltaic System, Pranav Nitin Godse

Masters Theses

"In recent years, solar power has been a popular form of renewable energy. This research conducts a cost analysis in implementing a rooftop photovoltaic system as part of an energy management schema for a university campus. The proposed system would be installed on the roof of one of the largest buildings on campus at Missouri University of Science and Technology, Toomey Hall; the objective function of the research involves reducing dependence on conventional energy sources on campus. Toomey Hall houses the Department of Mechanical and Aerospace Engineering (MAE) and is the largest academic unit on campus. Considering the vast expanse …

Bio-Inspired Flow Fields For Pem Fuel Cells- Decoupling Pressure And Distribution Effects On Performance And Identifying Design Opportunities, Joshua David Heck

Masters Theses

"The performance of Polymer Electrolyte Membrane Fuel Cells (PEMFCs) is significantly impacted by flow distributor geometry. The effects of flow distributor geometry on PEMFCs was explored in two ways in this study. Firstly, the relative effects of pressure and distribution characteristics of different flow fields on fuel cell unit and system level performance were considered. A method of decoupling these effects was proposed and demonstrated by application to the traditional serpentine and parallel flow field designs.The performance of these two designs were modeled computationally and it was shown that, of the 17% better performance of the serpentine design, 12% was …

Combined Flue Gas Cleanup Process For Simultaneous Removal Of SoX, NoX, And Co₂ -- A Techno-Economic Analysis, Amit Narendrasing Hajari

Masters Theses

"Flue gas cleanup often requires the removal of SO_x, NO_x and CO₂ in separate units before atmospheric emission. The step-wise treatment process currently in place incurs significant cost and energy penalty. A single-step adsorption process based on pressure swing adsorption (PSA) by which these impurities are removed is envisioned as an efficient means of flue gas cleanup that can be applied relatively easily. In this study, the technological and economic feasibility of a single-step separation process in which SO_x, NO_x and CO₂ are simultaneously removed from flue gas streams are assessed. Capital …

Cloth-Air Partitioning Of Oxybenzone, Jonathan T. Hill

Masters Theses

"Clothing has been proven to be a significant accumulator of chemicals from the air. Semi-volatile organic compounds (SVOCs) have a high affinity towards textiles, and measuring the equilibrium partition coefficient between cloth and air (K_cloth-air) for SVOCs is crucial in predicting human exposure to these compounds. This study aims to quantify K_cloth-air for oxybenzone to contribute to a larger human exposure experiment carried out at the Technical University of Denmark (DTU). K_cloth-air for oxybenzone was calculated using data collected from the exposure chamber at DTU and from performing extractions of oxybenzone in fabric samples from the …

Cfd Validation And Scaling Of Condensation Heat Transfer, Varun Kalra

Masters Theses

"A CFD study was performed using STAR-CCM+ to validate the software for its competence in the prediction and scaling of condensation heat transfer in the presence of air acting as a non-condensable gas. Three vertical concentric tube heat exchanger geometries with different diameters were studied in the CFD analysis. It was seen that the steam bulk temperatures predicted by STAR-CCM+ closely matched the experimental data. However, the temperatures of outer wall of the steel condenser tubes showed a deviation of 2% to 11% from the experimental values. The error in adiabatic water wall temperatures were found to range from 18% …

Plug-In Hybrid Electric Vehicle Load Profile Estimation With Opportunity Charging, Reza Kazem Sharif Sharifi

Masters Theses

"This thesis focuses on the load profile analysis of the plug-in hybrid electric vehicles (PHEV), examining two different scenarios. In the first scenario, the battery of a PHEV is charged at the final arrival time, and the arrival time analysis has a minute accuracy. In the second scenario, opportunity charging, which refers to the stop-time between two trips, is used for charging the battery of the vehicle. However, if the stop-time between two trips is less than 30 minutes, the duration is not counted as an opportunity charging and it is filtered. The results of the two scenarios are compared, …

Spectrum Analyzer Based Phase Measurement For Emi Scanning Applications, Shubhankar Marathe

Masters Theses

"Often Electromagnetic Interference (EMI) scanning applications require phase and magnitude information for the creation of equivalent radiation models and for far-field predictions. Magnitude information can be obtained using a spectrum analyzer (SA), which is relatively inexpensive compared to phase resolving instruments such as oscilloscopes (scope) and vector network analyzers (VNA). The study focusses on the development of a near-field scanning method using a SA to measure the phase of the device under test (DUT) signals.

The first part deals with the development of the method in software simulation tools and testing it under standard test conditions. The second part deals …

Generating Fast And Accurate Compliance Reports For Various Data Rates, Srinath Penugonda

Masters Theses

"As the demands on the industry data rates have increased there is a need for interoperable interfaces to function flawlessly. Added to this complexity, the number of I/O data lines are also increasing making it more time consuming to design and test. This in general leads to creating of compliance standards to which interfaces must adhere. The goal of this theses is to aid the Signal Integrity Engineers with a better and fast way of rendering a full picture of the interface compliance parameters.

Three different interfaces at various data rates were chosen. They are: 25Gbps Very Short Reach (VSR) …

Hydraulic Conductivity Testing Of Cement-Bentonite Mixes For Use In Annular Well Seals, Amy Lynn Norval

Masters Theses

"Grout is the material used in the annulus of water supply and monitoring wells to prevent movement of water from adjacent formations or from the land surface into the well. Grout is critical for preventing cross-contamination of aquifers through a borehole when a single well penetrates multiple aquifers and for protecting aquifers from surface contamination. The composition and emplacement of grout is regulated in most states, with standard mixes of bentonite and cement being the most widely used types of grout. Despite widespread adoption of grout regulations, surprisingly little literature is available to describe the effectiveness of different grout mixtures. …