Engineering Commons^™

Incorporating New Technology Into Healthcare: An Analysis Of Performance, Acceptance, And Safety, Anthony Joseph Strawhun

Masters Theses

"Each year, advances in the healthcare industry allows for better patient care and increased ability to save lives. Looking at standardized and common healthcare devices for both inside and outside the hospital environment, this research studied the tradeoffs and human factors that affect operator performance and patient survival. This research studied the impact of human factors and technology in the development and implementation of the automated external defibrillator for out-of-hospital use and the incremental advantages of SMArT infusion pump technology over traditional intravenous infusion pumps for in-hospital care. The study highlights the complex human factors of both products and establishes …

The Mitigation Effects Of A Barrier Wall On Blast Wave Pressures, Nathan Thomas Rouse

Masters Theses

"The study examined the mitigating effects of a blast barrier wall. This area of blast mitigation is of interest due to the many different applications involved in protecting a specific target from an explosive attack. The research follows a 1:50 scale layout using 73 gram, hemisphere-shaped, Composition-4 charges detonated at combinations of three standoff distances from a blast barrier wall set at three different heights. This project used 45 data points for each combination of standoff distance and wall height. This project expanded prior research conducted by the United States Army Corps of Engineers (USACE) by increasing the database of …

Foundry Parameters For Casting High-Aluminum Lightweight Steel In Complex Shapes, Angella Marie Schulte

Masters Theses

"This work investigated the liquid metal treatment and molding practices for Fe- 30wt.%Mn-9wt.%Al-1wt.%Si-0.9wt.%C-0.5wt.%Mo steel. The goal of this research was to determine the process conditions that would produce a tough Fe-Mn-Al-C alloy and the appropriate mold design to produce a defect-free P900 plate.

Notch toughness of age-hardenable Fe-Mn-Al-C alloys decreases as phosphorus increases. Thermodynamic calculations and experimental work show that additions of Ca followed by Ce can be used to mitigate the deleterious effects of phosphorus, and the addition of Ar-stirring can be used to decrease the number of harmful aluminum nitride inclusions. In the solution-treated and aged condition (Brinell …

Data Aggregation In Wireless Sensor Networks, Priya Kasirajan

Masters Theses

"Energy efficiency is an important metric in resource constrained wireless sensor networks (WSN). Multiple approaches such as duty cycling, energy optimal scheduling, energy aware routing and data aggregation can be availed to reduce energy consumption throughout the network. This thesis addresses the data aggregation during routing since the energy expended in transmitting a single data bit is several orders of magnitude higher than it is required for a single 32 bit computation. Therefore, in the first paper, a novel nonlinear adaptive pulse coded modulation-based compression (NADPCMC) scheme is proposed for data aggregation. A rigorous analytical development of the proposed scheme …

The Placement Of Remediation Amendments Into Contaminated Sediments Via Waterjet Technologies, Gavin Hunter Ray Risley

Masters Theses

"The use of amendments to perform in situ remediation of contaminated sediments is a technique that is relatively mature. The need exists to develop a method of amendment delivery that will efficiently place the amendments into the contaminated zone at depth with minimal impacts to the benthic communities and contaminant resuspension. Waterjets have been used for hundreds of years as an excavation, cutting, and cleaning tool, but they can also be used to inject remediation amendments into contaminated sediments if setup properly. In order to test this concept, a waterjet amendment injection system and nozzle have been developed and tested. …

Biodiesel Production Using Supercritical Methanol, Dhaval Nitin Modi

Masters Theses

"The catalyst-free transesterification of oil (triglycerides) in supercritical methanol at a temperature and pressure above 239⁰C and 8.1MPa, respectively, provides a new way of producing biodiesel. High reaction temperature and pressure help to accelerate the transesterification because the supercritical methanol becomes non-polar and has enhanced contact with oil. The supercritical transesterification of soybean oil was carried out in a 170 ml volume high-pressure batch reactor. The pressure within the batch reactor was self-generated from heating the contents since no pumps were used. Transesterification of soybean oil with supercritical methanol readily produced biodiesel. Since the supercritical transesterification is carried out without …

Field Investigation Of Spalling In Bridge Decks With Partial-Depth Precast Concrete Panel Systems Using Non-Destructive Testing, Kandi Rebecca Wieberg

Masters Theses

"This study involved the investigation of the causes of spalling observed in several partial-depth precast prestressed bridge decks in the state of Missouri. Recently it has been observed that several bridges in Missouri with this type of construction have experienced spalling of concrete at the edges of the panels revealing an extreme condition of corrosion in the prestressing tendons, some to the point of rupture. Ground penetrating radar (GPR), which has been shown to be successful in bridge deck evaluation, was used to determine the relative condition of the prestressing tendons as well as the relative condition of the concrete …

Stability Of Streambanks Subjected To Highly Variable Streamflows: The Osage River Downstream Of Bagnell Dam, Kathryn Nicole Heinley

Masters Theses

"Streambank erosion of the Osage River downstream of Bagnell Dam is naturally-occurring; however, it may be significantly worsened due to releases made from the dam to generate hydropower. In this study, six typical outflow release patterns from Bagnell Dam were evaluated to determine their effects, if any, on the stability and the rate and amount of erosion of the banks of the Osage River.

The Bank Stability and Toe Erosion Model (BSTEM), version 5.2, was used to carry out the erosion and stability calculations. The model was validated by using data from another study and comparing the results from BSTEM …

Resistance Switching In Electrodeposited Magnetite Thin Films, Samantha Glen Matthews

Masters Theses

"The resistance switching phenomenon has been extensively studied in metal oxide thin films for its applications in the non-volatile memory industry. The research presented here focuses on magnetite thin films which have been electrodeposited onto gold-sputtered glass substrates via the electrochemical reduction of a Fe(III)-triethanolamine complex in aqueous alkaline solution. Magnetite was chosen for its usefulness in read/write memory applications, its high Curie temperature, its metal-to-insulator (Verwey) transition, and its half-metallic character and attendant spintronic properties. Resistance switching behavior caused by a reversible redox reaction at the anode was observed in the films, demonstrating that electrodeposited films show the same …

Evaluation Of Liquefaction-Induced Lateral Spreading In The Midwest, Kermit Nathanial Applegate

Masters Theses

"The Central United States is home to several seismically active regions: the Wabash Valley Seismic Zone, the South Central Illinois Seismic Zone, and the New Madrid Seismic Zone. All three of these regions are capable of inducing large ground motion throughout the Mississippi Valley and along the eastern border of Missouri. This has been supported by many paleoseismic studies conducted throughout the region, which have identified numerous instances of liquefaction phenomena. The fluvial deposition process associated with the Mississippi river valley makes it a prime location for possible liquefaction and lateral spreading effects. However, there are few studies pertaining to …

Emi Suppression Of Dc-Dc Synchronous Buck Converters By Layout Optimizations And Emi Prediction Using Non-Linear And Spice Circuit Co-Simulation, Ankit Bhargava

Masters Theses

"The oscillation on the phase voltage is due to the resonant structure formed by a parasitic loop (consisting of two FETs and the input decoupling capacitors) inductance and the output capacitance of the low side FET. Therefore, it is important to minimize this parasitic loop inductance. A simulation guideline is developed on full-wave modeling and simulation of buck converter layouts to estimate the parasitic loop inductances. Furthermore, this method is taken one step further to estimate the far-field radiation from the loop. These simulations were verified on six PCB variants of the buck converter and were compared with measurements in …

Strength Evaluation And Transportation Behavior Of Preformed Particle Gel Using Screens And Tubes, Rajesh Sarma Challa

Masters Theses

"This research included a series of experiments, using screen models to evaluate the strength of swollen gel particles. It also includes the study of PPG propagation and extrusion behavior through tubes of various internal diameters. The effect of the particle gel swelling ratio (depending on brine concentration), flow rate; and mesh size on the gel injection pressure and injectivity were studied. The results show that gel injection pressure depends primarily on the swelling ratio and the mesh size. However, the injection pressure does not increase significantly with injection rates, behavior consistent with the real-time injection pressure and injection rate change …

Excitation Of Whispering Gallery Modes In Glass Microspheres Using Optical Fiber Couplers, Sudha Sneha Devarakonda

Masters Theses

"This research is a study conducted on the excitation of whispering gallery modes (WGM) in small micron-scale glass spheres. Optical WGM may be represented by a light wave that propagates along the surface of the sphere and reaches back itself in phase at specific wavelengths. Due to this, very high intensities of light with narrow line widths circulate in the microspheres contributing to high Q factor. The evanescent field of an optical waveguide is used to resonantly stimulate the WGM.

The WGM excitation in fused silica spheres was demonstrated in the laboratory with 60% coupling efficiency. Tapered optical fibers were …

Mechanical Properties And Microstructure Study For Direct Metal Deposition Of 316l Stainless Steel, Tian Fu

Masters Theses

"Direct metal deposition or laser cladding is a process capable of producing fully dense and net shape metal products and this process could be used on coating metal components in various engineering applications. This process has fast heating and cooling rates which can improve the surface hardness and provide excellent adhesion through metallurgical bond between coating material and substrate. This paper evaluated the laser deposited 316L stainless steel coating on 4340 steel, which is widely used for aircraft landing gear applications. The microstructure, micro-hardness and quantitative EDS were explored to verify the coating properties. The desired homogeneous microstructure and high …

The Marketing Value Of Graduate Certificate Programs In Higher Education: A Strategic Assessment, Susmitha Akula

Masters Theses

"The last five years have seen a significant increase in the popularity of non degree graduate certificates. This increase has raised questions about the value of graduate certificate programs from the perspective of students, alumni and industry employers. Do certificate programs provide real world skills and knowledge valuable to industry? Do they serve as effective recruiting tools for the university? Do they provide opportunities for students to meet their professional goals in terms of salary increase, promotions, and the like? The present research is specifically aimed at answering these questions. Surveys that assess perceptions of value of graduate certificates to …

Calibration Of Resistance Factors For Axial Capacity Of Driven Pile Into Missouri Soil, Mulugeta Abay Kebede

Masters Theses

"Over the past two decades the load resistance factor design (LRFD) has been accepted by the American Association for Transportation and Highway Officials (AASHTO) for the design of bridges. This approach is now gaining widespread popularity in the United States for substructure bridge design, including the design of driven pile foundations, as the states calibrate the geotechnical resistance factors for local geological conditions and practices. This study presents the geotechnical resistance factors calibrated for axially driven pile using the first-order reliability method (FORM) for the target reliability index of 2.33 and 3.0 based on 64 end-of-drives (EOD) and 22 beginning-of …

Establishing Workload Limitations For Application In Human Systems Integration, Muhammet Servet Gulum

Masters Theses

"As the amount of technology involved in the typical workplace increases and standard operational procedures become increasingly sophisticated the danger of overloading an operator's mental resources is increasing. As much as these technological developments help operators with daily tasks, for example by providing information via monitors and wireless headsets; it also increased the mental workload due to the bombardment of information. Mental workload is commonly associated with information processing tasks, limits. With all the extra information inputs it is difficult to set limits where excessive information becomes dangerous. The workload optimization is critical as it directly affects system performance and …

Evaluation Of Alternative Methods For Surface Preparation And Deposition Of Cerium-Based Conversion Coatings On Aluminum Alloys, William J. Gammill

Masters Theses

"This thesis investigates alternative surface preparation and deposition methods for cerium-based conversion coatings (CeCC) on high strength aluminum alloys. Cerium-based conversion coatings are being investigated as a more environmentally friendly replacement for chromium-based conversion coatings. Currently, the alloys are immersed in strong alkaline and acidic solutions to prepare the aluminum surfaces for conversion coating, in which immersion may not be suitable for all situations. Alternatives to this method were investigated, including wipe application of solution, ultrasonic processing in deionized water, and abrasive blasting with alumina. AI 7075-T6 test panels were prepared using each of these methods and compared to a …

Thrust Measurement Of Dielectric Barrier Discharge Plasma Actuators And Power Requirements For Aerodynamic Control, Joseph William Ferry

Masters Theses

"Plasma-based aerodynamic actuators are of interest to researchers because they do not require moving control surfaces or a source of pressurized air to modify a flow field. Dielectric barrier discharge (DBD) plasma actuators have the added advantages of simple installation and low power consumption.

DBD plasma actuators are AC devices. This work measured actuator power consumption and thrust production for driving frequencies between 1 and 18 kHz, and for driving voltages of 6 and 9 kV peak to peak. The actuator consumed between 3 and 22 W of power and produced thrust levels between 0.05 and 0.2 mN per meter …

Experimental And Modeling Comparison Of Modular Photovoltaic-Thermal Solar Panels, Nicole C. Annis

Masters Theses

"Three different prototype photovoltaic-thermal panels using water as the cooling fluid were tested simultaneously. The first two panels (Panel A and B) consisted of a highly conductive thermal sheeting and different sized copper tubing. The third panel (Panel C) consisted of copper tubing with an aluminum fin. Thermal images were used to verify the heat transfer across the panels and compare the amount of heat radiating off the back of the photovoltaic-thermal panels versus the standard photovoltaic paneleaf Three A type panels were thermally connected in series. Three photovoltaic panels were also tested for an electrical comparison. The purpose of …

Sintering And Microstructural Effects On Mechanical Properties Of Zirconium Carbide-Tungsten Cermets, Melissa M. Giles Craft

Masters Theses

"Zirconium carbide-tungsten cermets were prepared by in situ reaction sintering a mixture of zirconia and tungsten carbide. Tungsten is a refractory metal with a melting point of 3422⁰C; however, its mechanical strength decreases significantly with increasing temperature. One approach to improve the elevated temperature strength is to add ceramic particulates to the matrix. Zirconia and tungsten carbide were compacted and then reacted and sintered in a single step by heating to 2050⁰C. The resulting stoichiometric zirconium carbide-tungsten cermet had a relative density greater than 96%. Cermets with two different grain sizes were produced by altering the final sintering temperature. Sintering …

"In Situ" Printed Circuit Board Material Extraction Procedure With Conductor Surface Roughness Study, Amendra Koul

Masters Theses

"Analysis of printed circuit board (PCB) behavior in a wide frequency range from tens MHz to at least 40 GHz is very important for modern high-speed digital design and assuring for signal integrity (SI). this analysis includes preliminary evaluation of per-unit-length parameters of the PCB transmission line and transmission line characteristics, such as propagation and attenuation constants, and also extraction of these parameters from measurements on real test vehicles. This thesis describes an impedance calculator tool, which can substantially speed up PCB design, and the second topic considered in this work is characterization of dielectric parameters of substrates of printed …

Influence Of Flow Baffles On Mixing Of Two Air Streams Flowing In A Mixing Chamber With Dissimilar Temperatures: A Computational Study, Abdulmunam Salem Shaban

Masters Theses

"One of the most important components of heating, ventilation, and air conditioning (HVAC) is an air handling unit (AHU) which is used to condition and mix air that arrives from outside the building (OA) and return air (RA) that exits from the indoor space. Poor mixing between the warm return air and the cold outside air often leads to air stratification in AHU, which results in various problems, such as, nuisance trips of low temperature safety thermostats, freezing of chilled or hot water coils in a stratified subfreezing air stream and loss of control when sensors cannot read the true …

Performance Evaluation Of Energy Efficient Lighting Associated With Renewable Energy Applications, Allison Nicole Sperber

Masters Theses

"The present study demonstrated lighting loads as an energy end use associated with renewable energy system applications. Incorporating an energy efficient end use within a renewable energy system can be especially beneficial regarding size and portability. Light-emitting diodes (LEDs) are an energy efficient alternative to traditional outdoor lighting, which is currently dominated by high intensity discharge source lamps. LEDs provide the ability to mitigate the negative impacts of diesel consumption when a diesel generator is used independently or as a backup for renewable energy applications in remote localities. In-field data was collected of traditional metal halide lamps and two comparable …

Embedded Optimal Control Of Mobile Robot Formations Using Neural Networks, Bryan M. Brenner

Masters Theses

"This work first presents the development of a nearly-optimal control scheme and then evaluates the effectiveness of this nearly-optimal control scheme by comparing it to a non optimal controller in Paper I. It is shown that the proposed nearly-optimal scheme is a significant improvement over the non optimal one in both simulation and hardware tests. The test was carried out on a differentially driven robotic vehicle in both obstacle free and obstacle ridden environments. On the other hand, the controller introduced for the obstacle avoidance in Paper II will also function in the absence of obstacles so that no switching …

Automatic Detection Of Malignant Melanoma Using Boundary Gradient Information In Dermoscopy Images, Yogesh Ajit Dandekar

Masters Theses

"This thesis demonstrates an algorithm which uses local border features, primarily derived from the border gradient, to help determine whether the lesion is a malignant melanoma or a benign lesion. Although this algorithm uses manually-marked lesion borders, it could be included in a fully automatic routine. A Prewitt algorithm with a window size proportional to the area of the lesion is used to calculate the gradient over the entire lesion boundary. This gradient value is used to calculate various boundary features, such as mean, standard deviation, and direction of maximum gradient. The dark and white areas inside the lesion combined …

Symbol Synchronization And Dynamic Channel Estimation In Multiple Input Multiple Output Systems Using Statistical Analysis Of Eye Diagrams, Abhishek Gupte

Masters Theses

"The research work presented in this document is the continuation of the project to develop a Multiple Input Multiple Output (MIMO) system using band-limited signals in strong multipath environments. The modulation format used is Gaussian Frequency Shift Keying (GFSK). Band-limiting introduces controlled Inter-Symbol Interference (ISI), which along with a multipath environment degrades the features of the received signal waveform that are vital to the performance of standard symbol synchronization techniques. A low complexity algorithm was deemed necessary to counter this problem so that the benefits of conserving bandwidth would not be obviated by an expensive and elaborate receiver architecture.

Such …

Performance Evaluation Of A Novel Diesel Fuel Air Separation And Filtration System For An Indirect Injection Diesel Engine, Michael Ray Hess

Masters Theses

"The objective of this research was to evaluate an air/fuel separation system known as a Fuel Preporator. The device's efficacy was determined by studying the effect of air entrainment on engine performance and fuel consumption of a General Motors 6.5 L naturally aspirated indirect injection (IDI) diesel engine. A test bed was developed to accommodate the test engine and test methods were adapted from federal regulations for steady-state engine testing (40 CFR 89 Subpart E). Cases of 0%, 5%, 10%, and 20% volumetric air entrainment were investigated for engine operation with and without the Fuel Preporator. Key measured engine performance …

Freeze Extrusion Fabrication Of 13-93 Bioactive Glass Scaffolds For Bone Repair, Nikhil D. Doiphode

Masters Theses

"We have investigated Freeze Extrusion Fabrication (FEF) of 13-93 bioactive glass to fabricate three dimensional scaffolds for bone tissue engineering. Bioactive glass paste was prepared for consistent extrusion through micro-nozzle and controlled porosity scaffolds were fabricated using additive manufacturing FEF. CAD models were prepared for different scaffold designs and computer controlled layer-by-layer deposition of pseudoplastic paste was carried out to in accordance. Liquid nitrogen assisted freezing of pastes was used for the consolidation of deposited layers. Post processing binder burnout and sintering schedules were designed for evaporation of organic binder and densification of glass. Sintering shrinkage was measured, and X-ray …

Implementation Of Integrated Function Structure And Object-Oriented Design Framework, Qiong Gao

Masters Theses

"The function structure method is commonly used in mechanical product design. Although a function structure allows defining all the functions of the components of a product and their interactions, it does not have an effective architecture for the software design of a mechatronic product. An integrated function structure and object-oriented design framework was recently developed to overcome this disadvantage. In this thesis, the implementation of this framework to design several products in different categories, including an inkjet printer, and electric screwdriver and a vacuum cleaner, is discussed. The design results obtained using the new framework are compared to the design …