Engineering Commons^™

Development Of Zeolitic Imidazolate Frameworks For Enhancing Post-Combustion Co2 Capture, Dustin Lee

Master's Theses

Post-combustion CO₂ capture is a promising approach for complementing other strategies to mitigate climate change. Liquid absorption is currently used to capture CO₂ from post-combustion flue gases. However, the high energy cost required to regenerate the liquid absorbents is a major drawback for this process. As a result, solid sorbents have been investigated extensively in recent years as alternative media to capture CO₂ from flue gases. For example, metal organic frameworks (MOFs) are nanoporous materials that have high surface areas, large pore volumes, and flexible designs. A large number of MOFs, however, suffer from 1) low CO …

Analyzing The Safety Effects Of Edge Lane Roads For All Road Users, Marcial F. Lamera

Master's Theses

This thesis acts as one of the first studies that analyzes the safety effects of Edge Lane Roads (ELR) for all road users. This is important since ELRs can be a solution to many issues, such as alleviating congestion, increasing multimodality along roadways, and reducing maintenance costs. ELRs in both North America and Australia were observed. Starting with the North American ELRs, the following study designs were employed to estimate the safety of ELRs: (a) yoked comparison where each ELR installation was matched with at least two comparable 2-lane roads to serve as comparison sites and (b) an Empirical Bayes …

Exploration And Comparison Of Image-Based Techniques For Strawberry Detection, Yongxin Liu

Master's Theses

Strawberry is an important cash crop in California, and its supply accounts for 80% of the US market [2]. However, in current practice, strawberries are picked manually, which is very labor-intensive and time-consuming. In addition, the farmers need to hire an appropriate number of laborers to harvest the berries based on the estimated volume. When overestimating the yield, it will cause a waste of human resources, while underestimating the yield will cause the loss of the strawberry harvest [3]. Therefore, accurately estimating harvest volume in the field is important to farmers. This paper focuses on an image-based solution to detect …

Solar Pv Feasibility Study On Higher Education Institutions In Connecticut, Sai Pujitha Karanam

Master's Theses

One of the most common issue in Connecticut (CT) is the high electricity rates. CT stands among the top five states for its high electric rates due to limitation in transmission facilities and storage of natural gas. Education institutions serve as good places to install photovoltaic systems as they have a large number of buildings available. Photovoltaic systems are a growing alternative energy source that reduces the electricity demand and hence higher education institutions should start implementing these technologies to reduce the burden of paying more for electricity bills.

The primary objective of the study was to analyze the economic …

Development Of A Nomogram To Predict The Maximum Contact Stress Between A Bridge I-Girder And A Support Roller, Thanin Chanmalai

Master's Theses

The incremental launching method (ILM) is one of the methods of bridge construction located in environmentally sensitive areas. During the bridge launching, there are significant contact stress issues at the contact regions between the launching system and the steel bridge girders. The Iowa River Bridge (IRB) is a case study of bridge construction that used the ILM during a steel I-girders installation. Contact stress can cause severe defects during launch, which can occur within the material where the material could be damaged.

Hertz contact theory is applied for calculating contact stress between two solid surfaces, which is initially derived from …

Maleic Anhydride Compatibilized Peach Waste As Filler In Polypropylene And High Density Polyethylene Biocomposites, Caralyn Wong, Stephanie Jung, Joongmin Shin, Ajay Kathuria

Master's Theses

It is estimated that roughly 103, 515 tons of peach waste is produced annually in the US. The majority of the waste is disposed of in landfills, which contributes to climate change as they release 93 million metric tons of CO₂ equivalent. Peach waste principally consists of remaining stone and seed after flesh removal. The agro-waste includes both cellulose and lignin, which can be utilized as a filler in plastic packaging to reduce carbon footprints and material cost. The objectives of this research are (1) to develop peach flour (PF)-filled biocomposites with a polyolefin matrix using maleic anhydride-g-high density …

The Use Of Low-Cost Sensors And A Convolutional Neural Network To Detect And Classify Mini-Drones, Austin Florio

Master's Theses

The increasing commercial availability of mini-drones and quadrotors has led to their greater usage, highlighting the need for detection and classification systems to ensure safe operation. Instances of drones causing serious complications since 2019 alone include shutting down airports [1-2], spying on individuals [3-4], and smuggling drugs and prohibited items across borders and into prisons [5-6]. Some regulatory measures have been taken, such as registration of drones above a specific size and the establishment of no-fly zones in sensitive areas such as airports, military bases, and national parks. While commercial systems exist to detect drones [7-8], they are expensive, unreliable, …

An Adaptive Approach To Gibbs’ Phenomenon, Jannatul Ferdous Chhoa

Master's Theses

Gibbs’ Phenomenon, an unusual behavior of functions with sharp jumps, is encountered while applying the Fourier Transform on them. The resulting reconstructions have high frequency oscillations near the jumps making the reconstructions far from being accurate. To get rid of the unwanted oscillations, we used the Lanczos sigma factor to adjust the Fourier series and we came across three cases. Out of the three, two of them failed to give us the right reconstructions because either it was removing the oscillations partially but not entirely or it was completely removing them but smoothing out the jumps a little too much. …

Low-Cost Reaction Wheel Design For Cubesat Applications, Nicholas J. Bonafede Jr.

Master's Theses

As science instruments on CubeSats become more sensitive to the attitude of the spacecraft, better methods must be employed to provide the accuracy needed to complete the planned mission. While systems that provide the accuracy required are available commercially, these solutions are not cost-effective, do not allow the design to be tailored to a specific mission, and most importantly, do not give students hand-on experience with attitude control actuators. This thesis documents the design, modeling, and simulation of a low-cost, student-fabricated, reaction wheel system for use in 3U CubeSat satellites. The entire design process for the development of this reaction …

Traffic Privacy Study On Internet Of Things – Smart Home Applications, Ayan Patel

Master's Theses

Internet of Things (IoT) devices have been widely adopted in many different applications in recent years, such as smart home applications. An adversary can capture the network traffic of IoT devices and analyze it to reveal user activities even if the traffic is encrypted. Therefore, traffic privacy is a major concern, especially in smart home applications. Traffic shaping can be used to obfuscate the traffic so that no meaningful predictions can be drawn through traffic analysis. Current traffic shaping methods have many tunable variables that are difficult to optimize to balance bandwidth overheads and latencies. In this thesis, we study …

Boost Converter Inductor Sizing Effects On The Performance Of Mppt Algorithms, Alan Nonaka

Master's Theses

With solar power and other renewables set to take over the market in the coming decades, maximum power point tracking will be essential to optimizing power output. One underserved topic of research is the effect of inductor current ripple on performance of Maximum Power Point Tracking (MPPT) algorithms. Many new topologies are focused on decreasing the ripple from PV source to increase efficiency and power output. However, not much has been done to show ripple degrading performance of MPPT algorithms. This study uses a boost converter topology to test the performance of constant duty cycle step Perturb and Observe (PO), …

Hydraulic Effects Of Perpendicular Water Approach Velocity On Meter Gate Flow Measurement, John M. Thorburn

Master's Theses

Accurate flow measurement is required to effectively manage water resources. California Senate Bill X7-7 (SB X7-7), legislates this need by requiring agricultural water providers serving areas greater than 25,000 acres to develop an Agricultural Water Management Plan (AWMP) and adopt pricing based at least partly on volumetric water deliveries (DWR, 2009). This study focused on two of the most common flow measurement/flow control devices used in California open channel water conveyance systems: the circular meter gate and the rectangular meter gate. Testing was conducted on three Armco-type (round gates over round discharge pipe) gates measuring 12”, 18”, and 24” and …

Pathfinding Interplanetary Bus Capability For The Cal Poly Cubesat Laboratory Through The Development Of A Phobos-Deimos Mission Concept, Alyssa M. Ralph

Master's Theses

With the rise of CubeSats and the demonstration of their many space applications, there is interest in interplanetary CubeSats to act for example as scientific investigations or communications relays. In line with the increasing demand for this class of small satellites, the Cal Poly CubeSat Lab (CPCL) seeks to develop a bus that could support an interplanetary science payload. To facilitate this, a mission concept to conduct science of the moons of Mars, Phobos and Deimos, is investigated by determining the mission needs for a CubeSat in a Phobos-Deimos cycler orbit through the development of a baseline design to meet …

Secondary Uses Of Ballutes After Aerocapture, Josiah Shelton

Master's Theses

Aerocapture is a method for spacecraft orbital insertion that is currently being assessed for use in interplanetary missions. This method would use a low periapsis hyperbolic entry orbit to induce drag allowing the spacecraft to slow down without the use of a propulsion system. This is accomplished by using a ballute (balloon parachute), which is released after the appropriate change in velocity necessary to achieve the desired planetary orbit. Once released, the ballute could deploy a secondary mission vehicle. A MATLAB simulation was run to understand the environment a secondary payload would undergo, such as heating and deceleration, as well …

Limitations Of Initial Orbit Determination Methods For Low Earth Orbit Cubesats With Short Arc Orbital Passes, James P. Johnson

Master's Theses

This thesis will focus on the performance of angles only initial orbit determi- nation (IOD) methods on observational data of low Earth orbit (LEO) CubeSats. Using data obtained by Lockheed Martin’s Space Object Tracking (SpOT) facil- ity, four methods: Gauss, Double-R, Gooding and Assumed Circular, will use different amounts of orbital arc to determine which methods perform the best in the short arc regime of less than 10 degrees of orbital arc. Once the best method for estimating the orbit is determined, there will be analysis on whether these IOD methods are accurate enough to predict a secondary observation session. …

Combining Machine Learning And Empirical Engineering Methods Towards Improving Oil Production Forecasting, Andrew J. Allen

Master's Theses

Current methods of production forecasting such as decline curve analysis (DCA) or numerical simulation require years of historical production data, and their accuracy is limited by the choice of model parameters. Unconventional resources have proven challenging to apply traditional methods of production forecasting because they lack long production histories and have extremely variable model parameters. This research proposes a data-driven alternative to reservoir simulation and production forecasting techniques. We create a proxy-well model for predicting cumulative oil production by selecting statistically significant well completion parameters and reservoir information as independent predictor variables in regression-based models. Then, principal component analysis (PCA) …

Development And Optimization Of Imaging And Image Quantification Techniques For Tissue-Engineered Blood Vessel Mimics, Ashley Turcott

Master's Theses

Blood vessels mimics (BVMs) are tissue-engineered blood vessels used to test vascular devices in an environment that mimics some simple anatomical factors of native blood vessels. It is important to accurately and consistently assess tissue-engineered blood vessels, although there is currently a lack of standardization in Cal Poly’s Tissue Engineering Lab and in the entirety of the field. The goal of this thesis was to develop and optimize imaging and image quantification techniques for tissue-engineered blood vessels.

The first aim of this thesis optimized and compared imaging and assessment techniques for electrospun scaffolds. Images from different SEMs were compared to …

Identification Of Users Via Ssh Timing Attack, Thomas J. Flucke

Master's Theses

Secure Shell, a tool to securely access and run programs on a remote machine, is an important tool for both system administrators and developers alike. The technology landscape is becoming increasingly distributed and reliant on tools such as Secure Shell to protect information as a user works on a system remotely. While Secure Shell accounts for the abuses the security of older tools such as telnet overlook, it still has fundamental vulnerabilities which leak information about both the user and their activities through timing attacks. The OpenSSH client, the implementation included in all Linux, Mac, and Windows computers, sends each …

Data Acquisition, Analysis, And Modeling Of Rotordynamic Systems, Michael P. Mullen

Master's Theses

Data acquisition systems for rotordynamic analysis and machine vibration were explored for the purpose of replacing the obsolete Bently Nevada ADRE 208 and ADRE for Windows system. These included the development of Matlab based custom data acquisition systems and a user interface. A model of an anisotropic rotor response undergoing transient speed was developed for the rapid prototyping and testing of data acquisition systems. Several methods for the measurement of amplitudes and phase in both the time domain and frequency domain were developed and compared. An alternate data acquisition method which is more inline with industry practices was created for …

Smartphone-Tape Method For Calculating Body Segment Inertial Parameters For Analysis Of Pitching Arm Kinetics, Jay Sterner

Master's Theses

The objectives of this study were to (1) develop a non-invasive method (referred to as Smart Photo-Tape) to calculate participant-specific upper arm, forearm, and hand segment inertial properties (SIPs) (e.g. mass, center of mass, and radii of gyration) and (2) use those Smart Photo-Tape properties in inverse dynamics (ID) analyses to calculate injury-related pitching arm kinetics. Five 20- to 23- year-old baseball pitchers were photographed holding a baseball and analyzed using the Smart Photo-Tape method to obtain 3-D inertial properties for their upper arm, forearm, and hand. The upper arm and forearm segments were modelled as stacked elliptic cylinders and …

A Parametric Study Of Formation Flight Of A Wing Based On Prandtl's Bell-Shaped Lift Distribution, Kyle S. Lukacovic

Master's Theses

The bell-shaped lift distribution (BSLD) wing design methodology advanced by Ludwig Prandtl in 1932 was proposed as providing the minimum induced drag. This study used this method as the basis to analyze its characteristics in two wing formation flight. Of specific interest are the potential efficiency savings and the optimal positioning for formation flight. Additional comparison is made between BSLD wings and bird flight in formation.

This study utilized Computational Flow Dynamics (CFD) simulations on a geometric modeling of a BSLD wing, the Prandtl-D glider. The results were validated by modified equations published by Prandtl, by CFD modeling published by …

Fast Chirped Signals For A Tdma Ultrasonic Indoor Positioning System, Lauren M. Williams

Master's Theses

In this paper, a new concept for ultrasonic indoor positioning based on instantaneous frequency of ultrasonic signals is presented. Nonlinear phase characteristics of ultrasonic transducers introduce a frequency deviation in ultrasonic signals. By sweeping at very fast rates, a large spike in the deviation is introduced. The artefacts observable in instantaneous frequency estimations are highly localized and present an opportunity for accurate frequency detection. In order to be useful, the artefacts need to take place within the pulse and have sufficient magnitude for accurate processing. The system consists of a transducer transmitter and receiver pair, which have a center frequency …

Initial Orbit Determination Error Analysis Of Low-Earth Orbit Rocket Body Debris And Feasibility Study For Debris Cataloguing From One Optical Facility, Kyle Stoker

Master's Theses

This paper is predicated on determining the effectiveness of angles-only initial orbit determination (IOD) methods when limited observational data is available for low-Earth orbit (LEO) rocket body debris. The analysis will be conducted with data obtained from Lockheed Martin Space’s Space Object Tracking (SpOT) facility, focusing on their observational data from 2018 that contains tracking of rocket body debris for less than one minute per overhead pass. After the IOD accuracies are better understood, a feasibility study will follow that investigates the possibility of cataloguing LEO orbital debris from a single optical observation facility with similar observational capabilities as that …

Simulating Particle Packing During Powder Spreading For Selective Laser Melted Additive Manufacturing Using The Discrete Element Method In Abaqus, Priscilla Ng

Master's Theses

Metal additive manufacturing allows for the rapid production of complex parts that are otherwise impractical using conventional subtractive manufacturing techniques. Applications for additive manufacturing span across a broad array of industries including aerospace, automotive, and medical, among many others. One metric of printing success is material properties, including part density. While there has been extensive research completed for the density of printed parts, there is little published work concerning powder packing density on the build plate associated with powder spreading.

In this thesis, a Discrete Element Method (DEM) model was created in Abaqus to simulate the spreading behavior of particles …

Analysis Of The Tidal Range In The Sacramento San Joaquin Delta From 1857 To Present, Elena Szlemp

Master's Theses

The Sacramento San Joaquin Delta has been highly altered by human activity since the mid-1800s from mining, agriculture, dredging, and urbanization. Did the resulting modifications to channel width, depth, and length alter tidal range in the Sacramento San Joaquin Delta?

In this study, archival tidal records were evaluated at many stations throughout the San Francisco Bay and Delta, with a focus on San Francisco, Rio Vista, Sacramento, and Stockton daily, monthly, and annual tidal ranges. Monthly and seasonally averaged tidal ranges were analyzed to determine seasonal changes. In addition, tidal range was compared to daily Delta discharge to consider the …

Investigation Of Experimental Variation Of Bovine Sphingomyelin As A Novel Ingredient For Ultraviolet Protection, Esther Chen

Master's Theses

Skin cancer is a prevalent disease that globally affects 2-3 million people per year [1]. This number is expected to grow tenfold as depletion of the ozone layer contributes to harsher rays reaching Earth’s surface [2]. A common way to protect against those ultraviolet waves is to apply sunscreen, however, recent reports call into question the safety of some active ingredients as they can enter through the skin into the bloodstream [3]. This thesis aims to investigate an alternative solution that uses bovine sphingomyelin (BSM) as photoprotective solution against UV irradiation.

In order to evaluate the effectiveness of BSM against …

Surface Modifications Of Reverse Osmosis Membranes For Removal Of Bromide And Reduction Of Fouling, Joseph Seo

Master's Theses

Reverse osmosis (RO) is widely used for water reuse and desalination. Although RO membranes are known for their high salt rejection and practical permeate flux, their performance can be impaired by fouling, and their removal of some disinfection byproducts and their precursors (e.g., bromide, N-Nitrosodimethylamine [NDMA]) does not meet drinking water standards. RO membrane modifications have been widely studied to overcome these limitations. In this research, RO membranes were grafted with cationic polymers to induce a positive charge on the RO membrane surface. This modification aimed at enhancing the rejection of negatively charged bromide ions by removing them from solution …

A Study Of The Design Of Adaptive Camber Winglets, Justin J. Rosescu

Master's Theses

A numerical study was conducted to determine the effect of changing the camber of a winglet on the efficiency of a wing in two distinct flight conditions. Camber was altered via a simple plain flap deflection in the winglet, which produced a constant camber change over the winglet span. Hinge points were located at 20%, 50% and 80% of the chord and the trailing edge was deflected between -5° and +5°. Analysis was performed using a combination of three-dimensional vortex lattice method and two-dimensional panel method to obtain aerodynamic forces for the entire wing, based on different winglet camber configurations. …

Pocket Rocket: A 1u+ Propulsion System Design To Enhance Cubesat Capabilities, James M. Harper

Master's Theses

The research presented provides an overview of a 1U+ form factor propulsion system design developed for the Cal Poly CubeSat Laboratory (CPCL). This design utilizes a Radiofrequency Electrothermal Thruster (RFET) called Pocket Rocket that can generate 9.30 m/s of delta-V with argon, and 20.2 ± 3 m/s of delta-V with xenon. Due to the demand for advanced mission capabilities in the CubeSat form factor, a need for micro-propulsion systems that can generate between 1 – 1500 m/s of delta-V are necessary.

By 2019, Pocket Rocket had been developed to a Technology Readiness Level (TRL) of 5 and ground tested in …

Quantitative And Qualitative Error Re-Analysis Of Tidal Datasets, Ernesto Andrew Ledezma

Master's Theses

Tidal data forms the basis for understanding and quantifying sea-level rise and tidal statistics. While quality assurance methods based upon spectral and harmonic analysis have been applied to individual tidal records, these methods have not been used to assess global tidal datasets. In this thesis, four west coast tidal records were examined using harmonic analysis methods to investigate uncertainty on a monthly averaged basis. Uncertainty was identified using a method that quantifies time lag as a linear regression of height difference between a predicted and measured tidal height and the predicted rate of change of tidal height. Errors identified through …