Engineering Commons^™

Preparation For Nerve Membrane Potential Readings Of A Leech, Laboratory Setup And Dissection Process, Jason Patrick Caulfield

Master's Theses

A well documented laboratory setup, leech preparation process, and bio-potential data recording process are needed. Repeatability and quality data recordings are essential and thus dictate the requirements of the laboratory setup and processes listed above. Advances in technology have both helped and hindered this development. While very precise equipment is required to record the low voltage bio-potentials, noisy electronic equipment and wires surrounding the work area provide high levels of interference. Proper laboratory setup and data recording processes, however, limit the unwanted interference. Quality data can only be recorded from a properly handled and prepared leech subject. Proper setup and …

Do Canines Experience The Effects Of Heart Rate Turbulence?, Melanie Ann Gurunathan

Master's Theses

Background

The canine cardiac system has been the model against which many Class III cardiac devices are validated. Thus, it is expected that the canine heart has very similar electrical model to that found in humans. In 1999, the absence of Heart Rate Turbulence (HRT) after a single Pre-Ventricular Contraction (PVC) was linked to high-risk patient after acute myocardial infarction. Studies of HRT were performed on high-risk patients with Holter-Monitors as were most subsequent HRT studies. If HRT could potentially be used as a risk factor of heart disease, it is interesting to study whether HRT is present following a …

A System For Natural Language Unmarked Clausal Transformations In Text-To-Text Applications, Daniel Miller

Master's Theses

A system is proposed which separates clauses from complex sentences into simpler stand-alone sentences. This is useful as an initial step on raw text, where the resulting processed text may be fed into text-to-text applications such as Automatic Summarization, Question Answering, and Machine Translation, where complex sentences are difficult to process. Grammatical natural language transformations provide a possible method to simplify complex sentences to enhance the results of text-to-text applications. Using shallow parsing, this system improves the performance of existing systems to identify and separate marked and unmarked embedded clauses in complex sentence structure resulting in syntactically simplified source for …

An Experiment On Integrated Thermal Management Using Metallic Foam, Derek M. Geiger

Master's Theses

This report details an approach to using metal foam heat exchangers inside an integrated thermal management system on a variable cycle engine. The propulsion system of interest is a variable cycle engine with an auxiliary, variable flow rate fan. The feasibility of utilizing an open-celled metallic foam heat exchanger in the ducting between the constant and variable-fans on this variable cycle engine to cool the avionics was explored using an experimental approach. Two heat exchangers, 6.3 inch width by 6.3 inch length by 0.5 inch thickness, were constructed from 20 and 40 pores per inch (PPI) metal foam and tested. …

Validation Of Linearized Flight Models Using Automated System-Identification, Keith Eric Rothman

Master's Theses

Optimization based flight control design tools depend on automatic linearization tools, such as Simulink®’s LINMOD, to extract linear models. In order to ensure the usefulness and correctness of the generated linear model, this linearization must be accurate. So a method of independently verifying the linearized model is needed. This thesis covers the automation of a system identification tool, CIFER®, for use as a verification tool integrated with CONDUIT®, an optimization based design tool. Several test cases are built up to demonstrate the accuracy of the verification tool with respect to analytical results and matches with LINMOD. Several common nonlinearities are …

Design And Control Considerations For A Skid-To-Turn Unmanned Aerial Vehicle, Tanner Austin Sims

Master's Theses

The use of Unmanned Aerial Vehicles (UAVs) are rapidly expanding and taking on new roles in the military. In the area of training and targeting vehicles, control systems are expanding the functionality of UAVs beyond their initially designed purpose. Aeromech Engineering’s NXT UAV is a high speed target drone that is intended to simulate a small aircraft threat. However, in the interest of increasing functionality, enabling NXT to accomplish wings level skidding turns provides the basis for a UAV that can simulate a threat from a missile. Research was conducted to investigate the aerodynamic and performance characteristics of a winged …

Comparison And Design Of Simplified General Perturbation Models (Sgp4) And Code For Nasa Johnson Space Center, Orbital Debris Program Office, Nicholas Z. Miura

Master's Theses

This graduate project compares legacy simplified general perturbation model (SGP4) code developed by NASA Johnson Space Center, Orbital Debris Program Office, to a recent public release of SGP4 code by David Vallado. The legacy code is a subroutine in a larger program named PREDICT, which is used to predict the location of orbital debris in GEO. Direct comparison of the codes showed that the new code yields better results for GEO objects, which are more accurate by orders of magnitude (error in meters rather than kilometers). The public release of SGP4 also provides effective results for LEO and MEO objects …

Harmonic Analysis Of A Static Var Compensated Mixed Load System, James David Ruckdaschel

Master's Theses

As power electronic based controllers and loads become more prevalent in power systems, there is a growing concern about how the harmonics generated by these controllers and loads affect the power quality of the system. One widely used power electronic based load is the Variable Frequency Drive (VFDs) used to vary the speed of an induction motor; whereas a common example of a power electronic based controller used in power systems is the Static VAR Compensator (SVC) for improving a system’s power factor. In this thesis, the harmonic content and overall performance of a system including both a VFD and …

Development Of An In-Vitro Tissue Engineered Blood Vessel Mimic Using Human Large Vessel Cell Sources, Dimitri E. Delagrammaticas

Master's Theses

Tissue engineering is an emerging field that offers novel and unmatched potential medical therapies and treatments. While the vast aim of tissue engineering endeavors is to provide clinically implantable constructs, secondary applications have been developed to utilize tissue-engineered constructs for in-vitro evaluation of devices and therapies. Specifically, in-vitro blood vessel mimics (BVM) have been developed to create a bench-top blood vessel model using human cells that can be used to test and evaluate vascular disease treatments and intravascular devices. Previous BVM work has used fat derived human microvascular endothelial cells (EC) sodded on an ePTFE scaffold. To create a more …

A Flight Simulation Study Of The Simultaneous Non-Interfering Aircraft Approach, Brian H. Reel

Master's Theses

Using a new implementation of a NASA flight simulation of the Quiet Short-Haul Research Aircraft, autopilots were designed to be capable of flying both straight in (ILS) approaches, and circling (SNI) approaches. A standard glideslope coupler was sufficient for most conditions, but a standard Proportional-Integral-Derivative (PID) based localizer tracker was not sufficient for maintaining a lateral track on the SNI course. To track the SNI course, a feed-forward system, using GPS steering provided much better results.

NASA and the FAA embrace the concept of a Simultaneous, Non-Interfering (SNI) approach as a way to increase airport throughput while reducing the noise …

Implementation Of Physiologic Flow Conditions In A Blood Vessel Mimic Bioreactor System For The Evaluation Of Intravascular Devices, Marc Cody Dawson

Master's Theses

The prevalence and devastating nature of cardiovascular diseases has led to many advancements in the therapies used to treat the millions of patients that suffer as a result of these conditions. As coronary artery disease (CAD) is the most common of these cardiovascular conditions, it is a major focus of research among the medical industry. Although lifestyle changes and drug therapies can treat early CAD, more advanced cases often require more definitive interventions. In conjunction with angioplasty, stenting of an occluded vessel has shown significant success in preventing restenosis. However, as with nearly every therapeutic process in the medical field, …

Target Tracking Using Various Filters In Synthetic Aperture Radar Data And Imagery, Jessica L. Kiefer

Master's Theses

This thesis explores the use and accuracy of several discrete-time image filters for the purpose of target tracking in Synthetic Aperture Radar imagery. Both extended targets and point targets are used for tracking, showing the need for different types of filters for each target type.

Monte Carlo analysis is performed on the results of the extended target filter results to determine the absolute mean-squared error between the filter prediction of the target centroid and the actual location of the target centroid. Two different filters were chosen for the extended target: Kalman and H Infinity.

Both the Kalman and H Infinity …

The Effect Of The Fastener Of Different Configuration Composite Panels On Failure Analysis, Robert Austin

Master's Theses

This study presents the effect of the stacking sequence and fiber orientation on a composite sandwich panel subjected to static in-plane bolt loading. Six plates were constructed with laminates of unidirectional carbon fiber and cross ply weaves of fiberglass. The orientations that were examined included 0, +/- 45, and 90 degrees. Half of the plates had fiberglass lamina on the outside of the laminate while the other three plates had the carbon fiber on the outside. Experimental and analytical tests were performed to determine the best orientations and stacking sequence.

For the numerical analysis, plates with fibers oriented at +/- …

Bottom-Up Ontology Creation With A Direct Instance Input Interface, Charles C.H. Wei

Master's Theses

In general an ontology is created by following a top-down, or so called genus-species approach, where the species are differentiated from the genus and from each other by means of differentiae [8]. The superconcept is the genus, every subconcept is a species, and the differentiae correspond to roles. To complete it a user organizes data into a proper structure, accompanied with the instances in that domain in order to complete the construction of an ontology. It is a concept learning procedure in a school, for example. Students first learn the general knowledge and apply it to their exercise and homework …

Simultaneous Nitrification And Denitrification Of Wastewater Using A Silicone Membrane Aerated Bioreactor, Kirk Hjelte Waltz

Master's Theses

The purpose of this thesis is to investigate the use of a single reactor to biologically treat wastewater by simultaneously oxidizing ammonia, and reducing nitrate and nitrite. The Environmental Protection Agency (EPA) places strict discharge restrictions on these compounds due to their inherent toxicity to humans, wildlife, and ecosystems. The use of a simultaneous system can assist the conventional wastewater treatment technology that requires separate systems, by creating a system that needs less time and smaller size to reach effluent requirements. To conduct this research, a bench-scale membrane aerated biofilm reactor was built using silicone tubing for aeration. Batch and …

Shielding Effectiveness Of Superalloy, Aluminum, And Mumetal Shielding Tapes, Cindy Suit Cheung

Master's Theses

Using MIL-HDBK-419A, MATLAB and Nomographs, Shielding Effectiveness for the Magnetic Field, Electric Field, and Plane Wave were calculated over a frequency range from 10 Hz to 1 GHz. The three shielding tapes used included superalloy, aluminum, and mumetal. Calculations for Shielding Effectiveness involve the computation of Absorption Loss, Reflection Loss, and Re-Reflection Correction Factor. From the outcome of the calculations, it was suitable to conclude that all three metals fulfill the 40 dB Shielding Effectiveness requirements for SGEMP fields for frequencies greater or equal to 1 MHz. Accordingly, all three shielding tapes provide at least 40 dB of shielding to …

Development Of An Imager System Optimized For Low-Power, Limited-Bandwidth Space Applications, Kalia R. Glassey

Master's Theses

A relatively new picosatellite standard, CubeSats have traditionally been used for simple educational missions. As CubeSats become more complex and utilize more complex sensors such as imagers, they gain enhanced credibility as satellite platforms.

Imaging systems on CubeSats have the potential to be used for a variety of uses, such as earth and weather monitoring, attitude determination, and remote sensing. However the size and power limitations of CubeSats pose an interesting challenge to the design of a capable, robust imaging system.

This thesis outlines the objectives and requirements of CP-3’s imaging system, and describes the development process and methods. Test …

Performance Of A Catch Basin Filter And Leachate From Biocidal Media For Stormwater Treatment, Ryan Scott Maclure

Master's Theses

The feasibility of installing biocidal beads into a catch basin filter insert for simultaneous stormwater disinfection and contaminant removal was tested. The catch basin filter insert (DrainPac®) was tested for its sediment, oil and grease, and coliform bacteria removal efficiency in conjunction with bench-scale testing of biocidal polymer beads. DrainPac® catch basin filters are composed of a metal frame, polypropylene filter fabric, and a high-density polymer support basket, and are installed below storm drains. A 12 x 41 in. DrainPac® filter (United Stormwater, Inc.) insert was set in a flume that simulated a large-scale catchment basin. Pond water was gravity …

Impacts Of Delayed Drawdown On Water Quality And Aquatic Biota In Seasonal Wetlands Of The Grassland Ecological Area, Los Banos, California, Kyle Nathan Poole

Master's Theses

The 178,000-acre Grassland Ecological Area in California’s San Joaquin Valley is managed to provide overwintering habitat to waterfowl on the Pacific Flyway. The major management activity is the fall flooding and spring drawdown of wetlands, timed to optimize the availability of forage vegetation and invertebrates for ducks and shorebirds. Wetland drainage contains salt, boron, and trace elements that are, in part, derived from imported surface water but also concentrate during storage in the wetland impoundments. The spring drawdown drainage contributes to occasional water quality violations in the San Joaquin River (SJR) during dry years. Compliance with water quality objectives may …

Optimization Of Gan Laser Diodes Using 1d And 2d Optical Simulations, Sean Richard Keali'i Jobe

Master's Theses

This paper studies the optical properties of a GaN Laser Diode (LD). Through simulation, the GaN LD is optimized for the best optical confinement factor. It is found that there are optimal thicknesses of each layer in the diode that yield the highest optical confinement factor. There is a strong relationship between the optical confinement factor and lasing threshold—a higher optical confinement factor results in a lower lasing threshold. Increasing optical confinement improves lasing efficiency. Blue LDs are important to the future of lighting sources as they represent the final color in the RGB spectrum that does not have a …

Phytoremediation Of Weathered Petroleum In Groundwater By Arroyo Willows In Nutrient Amended On-Site Mesocosms, Sarah E. Bragg-Flavan

Master's Theses

PHYTOREMEDIATION OF WEATHERED PETROLEUM IN GROUNDWATER BY ARROYO WILLOWS IN NUTRIENT AMENDED ON-SITE MESOCOSMS

SARAH BRAGG-FLAVAN

A large-scale mesocosm study was conducted to determine if vegetation with willow trees enhances biodegradation and to evaluate the mechanisms of natural biodegradation of weathered petroleum compounds under field conditions. The mesocosms were designed to model conditions at a former oil field where mid-range petroleum distillates were used as a diluent for pumping crude oil contaminated the soil and groundwater at the site with petroleum compounds. Ten mesocosms were constructed at the field site using un-impacted soil and diluent-impacted groundwater from the site. Five …

Potential Migration Of Ε-Caprolactam To Water And Wine As Affected By Transportation And Storage, Joseph C. Ianneo

Master's Theses

Abstract: Under normal sealing and storage conditions, Nylon-6, poly-caprolactam-based plastic laminates may release impurities to packaged foods and liquids and the application of heat for cooking often increases the rate of migration. Epsilon-caprolactam is one of the main contaminates found to migrate from a Nylon-6 poly-caprolactam plastic film. The objectives of this study were to determine the effects of solvent, transportation and storage time on the migration of ε-caprolactam from a Nylon-6-based lidding material into water or a white wine substitute (12% ethanol). Polypropylene plastic cups were filled, sealed, packaged, stacked and exposed to a simulated 3-day cross-country shipment. Cups …

A System For Measuring The Lift And Drag Forces Of A Spinning Golf Ball Held Fixed Within A Wind Tunnel, Ryan R. Miller

Master's Theses

A system was designed, built and tested in order to test the aerodynamic properties of a standard golf ball in a wind tunnel manufactured by ELD, Inc. model 406(B). The system consists of a rotating shaft, on which the golf ball is attached, connected to a two-axis force transducer. Additionally, an automated data acquisition system was built for enhanced precision of measurements. Data for wind speeds up to 160 ft/s and rotational speeds up to 8,600 rpm were obtained and analyzed. The purpose of the designed apparatus was to allow for studies to better understand the lift and drag coefficients …

Temperature Influence And Heat Management Requirements Of Microalgae Cultivation In Photobioreactors, Thomas Hagen Mehlitz

Master's Theses

Microalgae are considered one of the most promising feedstocks for biofuel production for the future. The most efficient way to produce vast amounts of algal biomass is the use of closed tubular photobioreactors (PBR). The heat requirement for a given system is a major concern since the best algae growth rates are obtained between 25-30 °C, depending on the specific strain. A procedure to determine temperature influence on algal growth rates was developed for a lab-scale PBR system using the species Chlorella. A maximum growth rate of 1.44 doublings per day at 29 °C (optimal temperature) was determined. In addition, …

Characterization Of A Viscoelastic Response From Thin Metal Films Deposited On Silicon For Microsystem Applications, Steven L. Meredith

Master's Theses

Understanding the mechanisms that control the mechanical behavior of microscale actuators is necessary to design an actuator that responds to an applied actuation force with the desired behavior. Micro actuators which employ a diaphragm supported by torsional hinges which deform during actuation are used in many applications where device stability and reliability are critical. The material response to the stress developed within the hinge during actuation controls how the actuator will respond to the actuating force. A fully recoverable non-linear viscoelastic response has been observed in electrostatically driven micro actuators employing torsional hinges of silicon covered with thin metal films. …

Effectiveness Of Thermal Oxidation In Relation To Anterior Cervical Plates, Katherine A. Miyashiro

Master's Theses

Ti-6Al-4V anterior cervical plates (ACP) are used in spinal fusion surgeries to fixate cervical vertebrae during graft adhesion. However, documented cases of implant failure and the potential for ACP corrosion raise concerns regarding any degradation of material resulting from extended implantation. In addition, abrasion during implantation may damage a section of the protective oxide layer, potentially exposing surrounding tissues to the harmful effects of bare titanium, aluminum, and vanadium. Thermal oxidation has been shown to improve corrosion-resistance and wear-resistance, depending on temperature and time. To quantify the attributes of the thermally grown oxide layer, Ti-6Al-4V coupons underwent thermal oxidation treatments …

Lean Erp Systems: Existence And Viability In Today's Manufacturing Industry, Miroslav Djuric

Master's Theses

This thesis evaluates the existence and viability of lean ERP systems in today’s manufacturing industry. Results from the research show that current practitioners of lean – who also utilize ERP systems – do not have a strong enough link between the two to consider their ERP systems, and overall organizations, as being truly lean.

Few articles and research papers in today’s body of knowledge contain information on the concept of lean ERP. A survey, sent to numerous industry professionals and posted on lean manufacturing websites, provided the results necessary for statistical analysis. The conclusions obtained from this survey analysis provided …

Analysis And Design Of Continuous Input Current Multiphase Interleaved Buck Converter, Sean Michael Zich

Master's Theses

The power requirements for microprocessors have been increasing per Moore's Law. According to International Technology Roadmap (ITRS), Voltage Regulator Module (VRM) for microprocessors will be about 200 W at 1 V output in 2010. With the VRM’s topology of synchronous buck, serious technical challenges such as small duty cycle, high switching frequencies, and higher current demands, contribute to decreased power density and increased cost.

This thesis proposes a Continuous Input Current Multiphase Interleaved Buck topology to solve the technical challenges of powering future microprocessors. This new topology is aimed to improve past topologies by providing continuous input current and improved …

Three-Dimensional Target Modeling With Synthetic Aperture Radar, John R. Hupton

Master's Theses

Conventional Synthetic Aperture Radar (SAR) offers high-resolution imaging of a target region in the range and cross-range dimensions along the ground plane. Little or no data is available in the range-altitude dimension, however, and target functions and models are limited to two-dimensional images. This thesis first investigates some existing methods for the computation of target reflectivity data in the deficient elevation domain, and a new method is then proposed for three-dimensional (3-D) SAR target feature extraction.

Simulations are implemented to test the decoupled least-squares technique for high-resolution spectral estimation of target reflectivity, and the accuracy of the technique is assessed. …

Nano-Mechanics Of Cartilage Glycosaminoglycans Using Molecular Dynamics Methods, Kevin Neil Hendrickson

Master's Theses

Articular Cartilage (AC) is the main load carrying material in synovial joints {Hamerman, 1962} and degeneration of AC can cause pain in the form of arthritis. Current work is centered on the method of replacing damaged cartilage inside the body (in vivo) with tissue engineered outside the body (ex vivo) {Temenoff, 2000}. In order to engineer tissue ex vivo similar to the native tissue in structure and function there must be a comprehensive understanding of the mechanical properties of AC. This work focuses on the study of glycosaminoglycans (GAGs), a molecule known to be primarily responsible for the compressive stiffness …