Engineering Commons^™

Experimental Verification And Integration Of A Next Generation Smart Power Management System, Tavis Clemmer

Graduate Theses and Dissertations

With the increase in energy demand by the residential community in this country and the diminishing fossil fuel resources being used for electric energy production there is a need for a system to efficiently manage power within a residence. The Smart Green Power Node (SGPN) is a next generation energy management system that automates on-site energy production, storage, consumption, and grid usage to yield the most savings for both the utility and the consumer. Such a system automatically manages on-site distributed generation sources such as a PhotoVoltaic (PV) input and battery storage to curtail grid energy usage when the price …

Incorporating Environmental And Social Factors Into Decision-Making Of An Oil And Gas Industry To Improve Sustainability, Gaurav Dabhadkar

Graduate Theses and Dissertations

The energy industry (including the oil and gas industry) is facing unparalleled scrutiny and demands from stakeholders including investors, regulators (industry and environmental), communities, and other stakeholders. Sustainable development is one of the major concerns of the oil and gas industry. Companies are seeking to increase sustainability of their operations by considering environmental and Social concerns in addition to economic concerns. Oil and gas companies need to take decisions at different stages of the product life cycle (e.g. planning, design, exploration, production, and clean-up) which have direct or indirect impact on the organization's objectives. Addressing economic, technical, Social, and environmental …

Single-Walled Carbon Nanotube Arrays For High Frequency Applications, Asmaa Elkadi

Graduate Theses and Dissertations

This dissertation presents a thorough analysis of semiconducting Single-Walled Carbon Nanotube-based devices, followed by a test structure fabrication and measurements.

The analysis starts by developing an individual nanotube model, which is then generalized for many nanotubes and adding the parasitic elements. The parasitic elements appear when forming the device electrodes degrade the overall performance.

The continuum model of an individual nanotube is developed. A unique potential function is presented to effectively describe the electron distribution in the carbon nanotube subsequently facilitating solving Schrödinger's equation to obtain the energy levels, and to generalize the model for many nanotubes.

It is shown …

Numerical Modeling Of Fluid Migration In Hydraulically Fractured Formations, Toyin Christie Aseeperi

Graduate Theses and Dissertations

Economic production from low permeability shale gas formations has been made possible by the introduction of horizontal drilling and hydraulic fracturing. To ensure that gas production from these formations is optimized and carried out in an environmentally friendly approach, knowledge about the patterns of gas flow in the shale reservoir formation is required. This work presents the development of a shale gas reservoir model for the characterization of flow behavior in hydraulically fractured shale formations. The study also seeks to develop more computationally efficient approaches towards the modeling of complex fracture geometries. The model evaluates the migration patterns of gas …

Using The Triple Bottom Line To Select Sustainable Suppliers For A Major Oil And Gas Company, Pandarinath Adarsh Sunkari

Graduate Theses and Dissertations

Companies have primarily been focusing on the financial bottom line i.e., on increasing profits by increasing revenues and reducing costs. With high energy usage and environmental change posing threats to the environment and business operations, companies are now considering sustainability. Since some global suppliers have low cost labor, Social well-being and human development has also emerged as major goals of a company performing global operations. Focusing on these three goals is termed the "Triple Bottom Line" (TBL). We study and explore the TBL benefits that could be realized by an oil and gas company by focusing on sustainable suppliers. A …

Environmental Reliability Of Thin Film Sealing On Thick Film Ltcc, Charles R. Bourland

Graduate Theses and Dissertations

As electronic components and systems become more intricate and expand into new realms of use case scenarios, new materials systems must be explored. With new systems comes the balancing acts of cost and reliability. Presented here is a thesis that explores a new hybrid-electronics packaging system using low temperature co-fired ceramics, referred to as LTCC. An LTCC system was designed to explore the environmental reliability of numerous thick film LTCC features and parameters. A key element was to explore how a thin film metallization stack up used to cap or seal underlying thick film structures would decrease environmental susceptibility while …

Modeling Expected Travel Distances For A Common Warehouse Design With Multiple Docks, Mahmut Tutam

Graduate Theses and Dissertations

This thesis develops expected travel distance expressions for both single- and dual-command operations in a unit-load warehouse design with multiple docks. Storage racks are aligned perpendicular to the wall containing docks. Results are presented for continuous and discrete formulations. Because of the importance of how docks are located on a wall, different dock locations are investigated, including uniformly distributed docks along one wall, specified distances between adjacent docks located symmetrically about the mid-point of a warehouse wall, and any distribution of locations along one wall. Among the results obtained, we find that the width-to-depth ratio of the storage area (commonly …

Hand Pattern Recognition Using Smart Band, Theerth Raj Munusamy

Graduate Theses and Dissertations

The Importance of gesture recognition has widely spread around the world. Many research strategies have been proposed to study and recognize gestures, especially facial and hand gestures. Distinguishing and recognizing hand gestures is vital in hotspot fields such as bionic parts, powered exoskeleton, diagnosing muscle disorders, etc. Recognizing such gesture patterns can also create a stress-free and fancy user interface for mobile phones, gaming consoles and other such devices.

The objective is to design a simple yet efficient wearable hand gesture recognizing system. This thesis also shows that by taking both EMG and accelerometer data into account, can improve the …

Reliability-Based Design And Acceptance Protocol For Driven Piles, Joseph Jabo

Graduate Theses and Dissertations

The current use of the Arkansas Standard Specifications for Highway Construction Manuals (2003, 2014) for driven pile foundations faces various limitations which result in designs of questionable reliability. These specifications are based on the Allowable Stress Design method (ASD), cover a wide range of uncertainties, do not take into account pile and soil types, and were developed for general use. To overcome these challenges it is deemed necessary to develop a new design and acceptance protocol for driven piles. This new protocol incorporates locally calibrated RLFD resistance factors for accounting for local design and construction experiences and practices, as well …

Utilizing Failure Information For Mission Assessment And Optimization For Complex Systems, Charlie Destefano

Graduate Theses and Dissertations

This paper presents a new failure analysis method, Failure Identification for Mission Analysis (FIMA), which performs a general failure analysis for the overall state of a system, as well as a mission-specific analysis that identifies how failures may have differing effects on the various mission tasks that a system must complete. The FIMA method is capable of being implemented at any point in the design process. During early design stages, the FIMA method will identify various qualitative failure scenarios based on programmed functional relationships and any number of initial failures wished to be simulated. The functional relationships for this method …

Microbial Community Shifts Caused By Changes In The Primary Oxidant At A Drinking Water Treatment Plant, Connie Marie Moloney

Graduate Theses and Dissertations

Microbial communities resistant to common oxidants can cause concerns for water treatment plants (WTPs). If a bacterium is not fully oxidized during disinfection, these species can impede upon filtration processes or seed biofilms in the distribution system. In an effort to minimize disinfection by-products (DBP's) that result from the reaction of chlorine (Cl2) with natural organic matter, water treatment plants have the option to change their primary oxidant to chlorine dioxide (ClO2). The following study examines the change in microbial communities during the sedimentation process under differing oxidation regimes, specifically chlorine (Cl2) and ClO2 at the local water treatment plant …

Calibration Of Resistance Factors For Driven Piles Using Static And Dynamic Tests, Deshinka A. Bostwick

Graduate Theses and Dissertations

The field of geotechnical engineering has evolved from Allowable Stress Design (ASD) to Load Factor and Resistance Design (LRFD) which has led to a need to quantify the measures of uncertainty and the level of reliability associated with a project. The measures of uncertainty are quantified by load and resistance factors, while the level of reliability is driven by the amount of risk an owner is willing to take and is quantified by the reliability index. The load factors are defined through structural design codes, but the resistance factors have uncertainties that can be mitigated through reliability based design. The …

Development Of A Hydrologic Model For An Urban Headwater Stream: The Influence Of Pervious Surface Properties On Runoff Dynamics, Dawn A. Farver

Graduate Theses and Dissertations

A hydrologic model was developed for the Mullins Creek (MC) catchment located on the University of Arkansas campus in Fayetteville, Arkansas. The MC catchment is a small, dynamic urban stream system with a range of land use/land cover (LULC), an extensive and well-developed stormwater drainage network, and extensive urbanization (over 90% developed, and almost 50% impervious surface area (ISA)). Selected datasets provided information on the stormwater drainage network, the physical attributes of the catchment and receiving waterway (i.e. drainage area, slope, etc.), infiltration potential of soil map units, LULC, and percent ISA. These datasets were analyzed to provide input parameters …

Strategic Planning Tool Development Using Portfolio Decision Analysis, Luis B. Vargas Rojas

Graduate Theses and Dissertations

A portfolio decision analysis strategic planning tool was developed for the Facilities Management Office at the University of Arkansas. The tool provides information to support budget allocation decisions based on their Strategic Planning Project List, project attributes (e.g, seat utilization, scheduling preferences, and sustainability rank), and budget constraints. The projects are evaluated using multiobjective decision analysis. We introduce dynamic value functions, which vary the range of the value measures based on the planning horizon, to evaluate the projects). We determine facilities portfolios based on the project values and constraints using Linear Programming. In addition, insightful reports are generated, which provide …

Indirect Matrix Converter As Standard Power Electronic Interface, Andrés Escobar-Mejía

Graduate Theses and Dissertations

The increase in the penetration levels of distributed generation in the modern power grid and its importance in future energy systems have accelerated the interest of developing new power electronic interfaces for the energy conversion process. The feasibility of applying the indirect matrix converter as the standard power electronic interface for applications with power ratings from several kW to few MW is addressed in this dissertation. Special attention is given to those applications where space dominates the power electronic requirements. The main motivation for using the indirect matrix converter is that eliminates the energy storage component in the way of …

Development Of Micro-Hall Devices For Current Sensing, Thomas White

Graduate Theses and Dissertations

In this work, micro-Hall devices were developed for the purpose of sensing current within a high temperature and high power environment. GaAs HEMT, InGaAs pHEMT, and GaN HEMT structures were studied. These structures were grown by molecular beam epitaxy. Processing techniques including photolithography, metallization, Si deposition, wet etching, and dry etching were studied. Electrical characterization measurements including low frequency noise, Hall effect, sensitivity, capacitance-voltage, and current-voltage were performed.

Electron mobility and sheet carrier density studies were performed for both the InGaAs pHEMT and GaAs HEMT structures. Results indicated the InGaAs pHEMT was superior and thus fabricated as the micro-Hall device. …

The Role Of Quantum Dot Size On The Performance Of Intermediate Band Solar Cells, Najla Alnami

Graduate Theses and Dissertations

The goal of this thesis is to understand possible mechanisms for the reported decrease of the open circuit voltage and solar cell efficiency in quantum dot (QD) intermediate band solar cells (IBSCs). More specifically, the effect of indium arsenide (InAs) QD height on the open circuit voltage and solar cell efficiency was studied in a systematic way. To explore this effect in QD solar cells, several solar cells (SCs) were grown with varying InAs QD heights. All experimental characteristics of the QD solar cells were compared to a reference structure without QDs. All samples were grown by Molecular Beam Epitaxy …

Gesn Devices For Short-Wave Infrared Optoelectronics, Benjamin Ryan Conley

Graduate Theses and Dissertations

The electronics industry has a large silicon infrastructure for the manufacture of complementary-metal oxide semiconductor (CMOS) based electronics. The increasing density of Si based circuits has set a pace that is now pushing the physical limits of connectivity between devices over conventional wire based links. This has driven the increasing interest in Si based optoelectronics and to use the groundwork already established by the electronics industry for lower cost optical communications. The greatest limitation to this effort has been the incorporation of a Si based laser, which requires integration of a direct bandgap material within this CMOS process.

The Ge1-xSnx …

Photoelectric Characterization Of Bacteriorhodopsin Reconstituted In Lipid Bilayer Membrane, Joel Kamwa

Graduate Theses and Dissertations

The objective of this work was to conduct basic research in biologically inspired energy conversion solutions. A photosynthetic protein (Bacteriorhodopsin) was reconstituted in a bi-layer membrane. Then, when a laser beam was shined on the membrane, the photon energy was used by the protein to pump protons across the membrane. The translocation of protons across the membrane was measured as photocurrent. For this purpose, a system was built to characterize the lipid bilayer membranes and to measure the photocurrent. The lipid bilayer membrane was characterized by its capacitance and resistance. A picoampere photocurrent was observed when Bacteriorhodopsin protein was present …

Atom-Based Geometrical Fingerprinting Of Conformal Two-Dimensional Materials, Mehrshad Mehboudi

Graduate Theses and Dissertations

The shape of two-dimensional materials plays a significant role on their chemical and physical properties. Two-dimensional materials are basic meshes that are formed by mesh points (vertices) given by atomic positions, and connecting lines (edges) between points given by chemical bonds. Therefore the study of local shape and geometry of two-dimensional materials is a fundamental prerequisite to investigate physical and chemical properties. Hereby the use of discrete geometry to discuss the shape of two-dimensional materials is initiated.

The local geometry of a surface embodied in 3D space is determined using four invariant numbers from the metric and curvature tensors which …

Gesn Light-Emitting Devices, Yiyin Zhou

Graduate Theses and Dissertations

Silicon based optoelectronic devices have been investigated for decades. However, due to the indirect band gap nature of Si and Ge, developing of efficient light-emitting source on Si is still a challenging topic. GeSn based optoelectronic devices have the great potential to overcome this deficiency for several reasons. By adding more fraction of Sn into Ge, GeSn band gap could be reduced. The narrowed band gap could be developed for near to mid infrared applications. The alloy can even become the direct band gap material with a large Sn composition (beyond 8%). This feature could enhance the light emission from …

Metal Assisted Nanowire Growth For Silicon Nanowire/Amorphous Silicon Composite Solar Cell, Asmaa Ali Sadoon

Graduate Theses and Dissertations

Solar cells are photovoltaic devices that convert the energy of light to electricity by the photovoltaic effect. Crystalline silicon-based solar cells are the most dominant solar cells in the market today due to the high efficiency and relatively low cost. However, the cost of such solar cell is still high due to the large amount of material that is consumed in fabricating such a device. Polycrystalline/amorphous thin films and nanomaterial technologies have emerged to reduce the high cost of c-Si based solar cells and increase the efficiency. In this research, we combined these two technologies to propose and fabricate silicon …

A Portable Impedance Biosensing System Based On A Laptop With Labview For Rapid Detection Of Avian Influenza Virus, Yixiang Wang

Graduate Theses and Dissertations

Avian Influenza Virus (AIV) H5N1 is a highly pathogenic virus found not only in birds but also in human. Rapid and sensitive detection method is needed to help prevent the spread of AIV H5N1. In this study, a portable impedance biosensing system based on a laptop with LabVIEW software was developed for detection of AIV H5N1. First, a virtual instrument was programmed with LabVIEW software to form a platform for impedance measurement, data processing and control. The audio card of a laptop was used as a function generator while a data acquisition card was used with the signal channels for …

A Deep Search Architecture For Capturing Product Ontologies, Tejeshwar Sangameswaran

Graduate Theses and Dissertations

This thesis describes a method to populate very large product ontologies quickly. We discuss a deep search architecture to text-mine online e-commerce market places and build a taxonomy of products and their corresponding descriptions and parent categories. The goal is to automatically construct an open database of products, which are aggregated from different online retailers. The database contains extensive metadata on each object, which can be queried and analyzed. Such a public database currently does not exist; instead the information currently resides siloed within various organizations. In this thesis, we describe the tools, data structures and software architectures that allowed …

Development Of A Heart Rate Variability Measurement System Using Embedded Electronics, Naresh Kumar Velmurugan

Graduate Theses and Dissertations

Recent advances in embedded electronics have a remarkable influence on the health care system. One of the most important applications is to monitor the health care of the patients at anytime and anyplace. In the last two decades, many researchers have focused mainly on heart rate variability (HRV) measurements. Patient's heart rate variability should be continuously monitored to help them in case of emergency. Under these circumstances, patients are required to have a HRV measuring kit for a constant observation.

The proposed project focuses on the development of a heart rate variability measurement system with the use of embedded electronics. …

Optimizing Performance And Scalability On Hybrid Mpsocs, Hongyuan Ding

Graduate Theses and Dissertations

Hardware accelerators are capable of achieving significant performance improvement. But design- ing hardware accelerators lacks the flexibility and the productivity. Combining hardware accelerators with multiprocessor system-on-chip (MPSoC) is an alternative way to balance the flexibility, the productivity, and the performance. However, without appropriate programming model it is still a challenge to achieve parallelism on a hybrid (MPSoC) with with both general-purpose processors and dedicated accelerators. Besides, increasing computation demands with limited power budget require more energy-efficient design without performance degradation in embedded systems and mobile computing platforms. Reconfigurable computing with emerging storage technologies is an alternative to enable the optimization …

Wear Resistant Polydopamine/Ptfe Nanoparticle Composite Coating For Dry Lubrication Applications, Samuel George Beckford

Graduate Theses and Dissertations

This dissertation presents an investigation into the effect of nanoparticle fillers and a polydopamine adhesive primer on the tribological performance of thin PTFE films. The principal objective of this investigation was to reduce wear in PTFE films, an issue which precludes the use of PTFE films in tribological applications requiring high durability. The friction and wear of the composite films were evaluated using a ball-on-flat configuration in linear reciprocating motion. It was found that the use of a polydopamine adhesive primer reduces the wear of PTFE films more than 600 times. X-ray photoelectron spectroscopy (XPS) results show that a tenacious …

Life Cycle Assessment Projection Of Photovoltaic Cells: A Case Study On Energy Demand Of Quantum Wire Based Photovoltaic Technology Research, Shilpi Mukherjee

Graduate Theses and Dissertations

With increasing clean-energy demand, photovoltaic (PV) technologies have gained attention as potential long-term alternative to fossil fuel energy. However, PV research and manufacture still utilize fossil fuel-powered grid electricity. With continuous enhancement of solar conversion efficiency, it is imperative to assess whether overall life cycle efficiency is also being enhanced. Many new-material PV technologies are still in their research phase, and life cycle analyses of these technologies have not yet been performed. For best results, grid dependency must be minimized for PV research, and this can be accomplished by an analytical instrument called Life Cycle Assessment (LCA).

LCA is the …

Highly Transparent, Self-Cleaning, And Antireflective Nanoparticle Coatings, Corey Seth Thompson

Graduate Theses and Dissertations

Current solar panel technologies require a sheet of glass to serve as both mechanical support and to protect the cells from the environment. The reflection from the glass sheet can reflect up to 8% of the incident light, reducing the power output of the panel. Antireflective coatings can be used to allow more light to enter the panel to be converted into usable electricity. However, no solid thin film materials exhibit a low enough index of refraction to serve as antireflective coatings for common solar glass. The main goal of this research was to investigate the self-cleaning, antifogging, and antireflective …

Thermal Analysis, Parasitic Extraction, And Wirebond Reliability Studies Of Power Electronic Modules, Shilpa Prabhudeva

Graduate Theses and Dissertations

This thesis research investigates thermal performance, parasitic extraction and wirebond/encapsulation reliability of power electronic modules. Thermal performance is critical to the power electronic modules. As such, thermal analysis is an important part of the power electronic module design process. Several cases are studied on generalized power modules with a full bridge layout. A database is built based on these results. The studies are performed using SolidWorks thermal simulation tool. The database involves several parameters such as power dissipation, maximum junction temperature, ambient temperature, convection coefficient required to cool the module, size of the baseplate, heat-sink size, substrate size, spacing between …