Engineering Commons^™

Controller Platform Design And Demonstration For An Electric Aircraft Propulsion Driv, Rosten Sweeting

Graduate Theses and Dissertations

With the growth in the aerospace industry there has been a trend to optimize the performance of an aircraft by reducing fuel consumption and operational cost. Recent advancements in the field of power electronics have pushed towards the concepts of hybrid electric aircraft also known as more electrical aircrafts. In this work, a custom controller board for an electric aircraft propulsion drive was designed to drive a permanent magnet synchronous motor. Design of the controller board required knowledge of the topology selection and power module selections. Simulations of the system were performed using MATLAB/Simulink to analyze the overall performance of …

Study Of Thin Gan/Ingan/Gan Double Graded Structures For Future Photovoltaic Application, Mirsaeid Sarollahi

Graduate Theses and Dissertations

Indium gallium nitride (In_x Ga_(1-x) N) materials have displayed great potential for photovoltaic and optoelectronic devices due to their optical and electrical properties. Properties such as direct bandgap, strong bandgap absorption, thermal stability and high radiation resistance qualify them as great materials for photovoltaic devices. The tunable bandgap which absorbs the whole solar spectrum is the most significant feature which became attractive for scientists. The bandgap for these materials varies from 0.7 eV for InN to 3.4 eV for GaN covering from infrared to ultraviolet. In_x Ga_(1-x) N wurtzite crystal is grown on GaN buffer layer by Molecular Beam Epitaxy …

Constraint-Aware, Scalable, And Efficient Algorithms For Multi-Chip Power Module Layout Optimization, Imam Al Razi

Graduate Theses and Dissertations

Moving towards an electrified world requires ultra high-density power converters. Electric vehicles, electrified aerospace, data centers, etc. are just a few fields among wide application areas of power electronic systems, where high-density power converters are essential. As a critical part of these power converters, power semiconductor modules and their layout optimization has been identified as a crucial step in achieving the maximum performance and density for wide bandgap technologies (i.e., GaN and SiC). New packaging technologies are also introduced to produce reliable and efficient multichip power module (MCPM) designs to push the current limits. The complexity of the emerging MCPM …

Wind Tunnel Modeling Of Jack Rabbit Ii Mock Urban Environment Gas Concentration Measurements, Sami S. Fares

Graduate Theses and Dissertations

The 2015 Jack Rabbit (JR) II field trials were conducted to improve understanding of the denser-than-air dispersion of chlorine in an urban environment. The field study involved five large-scale, outdoor release trials of chlorine in a mock urban environment (MUE) at Dugway Proving Ground (DPG). Various instrumentation was deployed, including JazTM Ultraviolet-Visible (UV-Vis) point sensors capable of measuring gas-phase chlorine concentration throughout the mock urban array.

The Chemical Hazards Research Center (CHRC) was tasked by the Chemical Security Analysis Center (CSAC) with the Mock Urban Wind Tunnel (MUWT) program to study the 2015 JR II Trials at wind tunnel scale. …

Port Infrastructure Resilience Through Combined Wind-Surge Demand Characterization, Kaley Callaway

Graduate Theses and Dissertations

The United States economy is reliant on maritime transportation for 70% of imports and exports. Structures that are integral to the operation of ports, such as cranes, are jeopardized when tropical storms approach land. While wind is the only environmental load used to design dockside container cranes, storm surge often accompanies severe wind events and can create large structural loads. This study focuses on determining coupled storm-surge demands and the effect of waves on dockside container cranes. A damage index prediction tool that considers both maximum wind speed and storm surge height is developed and applied to historical hurricane data …

Refining Particle Size Specification For Asphalt Emulsion, Pedro Luis Diaz Romero

Graduate Theses and Dissertations

Pavements begin to deteriorate as soon as they are constructed, and traffic is released. The rate at which a pavement deteriorates depends on the material quality, the environment, and the loads carried. To properly preserve pavements and extend their life, various pavement preservation treatments are used. For flexible pavements, a considerable number of these treatments use asphalt emulsion (which are refer to simply emulsions from here on). Emulsions are classified based on their particle charge and reactivity. Emulsions used in chip seals are usually of rapid set reactivity and are classified based on tests over fifty years old.

It has …

Cyclic Behavior Of Laterally Skewed Special Moment Frame Connections: Experimental Testing And System-Level Analyses, Mohammad Hossein Kashefizadeh

Graduate Theses and Dissertations

Special moment frames (SMFs) are frequently used in high seismic areas for architecturally constrained designs. SMFs provide lateral system stiffness without the use of braces that often obstruct views and architectural features. Current American Institute of Steel Construction (ASIC) provisions (AISC 341-16) provide prequalified SMF connection details; however, all prequalified details only consider orthogonal connections between the beam and column. This dissertation investigates the effect of adding skew within SMF beam-to-column connections. The study presented herein involves system-level dynamic time-history analyses of skewed SMF connections, the analytical component-level investigation into the effect of the concrete slab on behavior of the …

Understanding Thermal Comfort Impact And Air Movement Around Open Stairs Through The Use Of Cfd Modeling, Ethan Davidson

Graduate Theses and Dissertations

The air exchange between two floors of a building has an impact on thermal comfort. The present research attempts to quantify this impact and identify the contributing factors disrupting the thermal comfort on and around stairs. Various heating and cooling scenarios were analyzed, using CFD modeling, in a simple two-story building separated by a single staircase. The research examines a single building layout with a fixed inlet and outlet configuration. In addition, the study investigated the short-term impact on thermal comfort. As a result, the duration of the simulations varies from two and half minutes to ten minutes, consistent with …

Rapid Non-Nuclear In Situ Density And Moisture Content Measurement Of Soil, Mateo Lopez

Graduate Theses and Dissertations

Adequate soil compaction is important for the stability and safety of structures and transportation infrastructure. Thus, methods utilized to obtain properties that control the quality of compaction in the field are essential to ensure proper construction. These properties include; total density, dry density, total unit weight and dry unit weight of the compacted soil. The most common method to measure these properties in the field is the Nuclear Density Gauge. Moisture content and density results are obtained using the Nuclear Density Gauge in one to four minutes. However, this method requires specialized training and strict storage requirements in addition to …

Validation Of Cfd Tornado Pressure On Building And Wind Field With Ttu Vortex Chamber Measurements, Sumit Verma

Graduate Theses and Dissertations

Structural failure of low-rise buildings is the root cause of higher number of casualties, death tolls and economic losses at the place of occurrence of tornadoes. Proper design of low-rise buildings in tornado-prone areas require accurate estimation of tornado-induced wind loads; however, exhaustive research to estimate the wind loads reliably on buildings during tornadic events is still lacking. Several studies have been carried out to investigate the magnitude of forces induced by tornado winds on buildings from experimental as well as computational side. However, the wind pressures obtained on the building from different experimental studies have shown significant variation from …

Development Of An Accelerated Life Testing Method For Reliability Assessment Of Wire Bonded Interconnects Subjected To Mechanical And Electromigratory Stresses, Whit Vinson

Graduate Theses and Dissertations

Power electronic advancement trends indicate that device power density will continue to increase as a result of increased power requirements and desired device form factor reduction in order to reduce weight and material costs and increase ease of integration into next-generation power systems. With these advancements come concerns regarding device reliability. The compounded effects of increased power density and form factor reduction in electrical conductors will yield amplified joule heating effects in addition to the already increasing device temperature profiles resulting from the incorporation of wide bandgap technology into power systems. Joule heating effects can lead to a variety of …

An Engineering And Economic Analysis Of The Implementation Of The Carbo Rock-It, Lydia Huck

Graduate Theses and Dissertations

The patented Carbo Rock-It system was developed to carbonate beverages for the craft brewing industry with the goal of reducing time, cost, and environmental impacts of the carbonation process. This research field tests, models, analyzes and optimizes the engineering and economic performance of a commercial-scale Carbo Rock-It placed in production at an operating brewery (Core Brewing and Distilling Co., Springdale, AR). Field tests indicated that the Carbo Rock-It was able to successfully carbonate twelve 120 BBL batches of Scarlet Letter Seltzer to 3.0 vol/vol while meeting all beverage quality and safety requirements. The Carbo Rock-It was able to reduce carbonation …

Structural Checking Tool Restructure And Matching Improvements, Derek Taylor

Graduate Theses and Dissertations

With the rising complexity and size of hardware designs, saving development time and cost by employing third-party intellectual property (IP) into various first-party designs has become a necessity. However, using third-party IPs introduces the risk of adding malicious behavior to the design, including hardware Trojans. Different from software Trojan detection, the detection of hardware Trojans in an efficient and cost-effective manner is an ongoing area of study and has significant complexities depending on the development stage where Trojan detection is leveraged. Therefore, this thesis research proposes improvements to various components of the soft IP analysis methodology utilized by the Structural …

Optimized Damage Assessment And Recovery Through Data Categorization In Critical Infrastructure System., Shruthi Ramakrishnan

Graduate Theses and Dissertations

Critical infrastructures (CI) play a vital role in majority of the fields and sectors worldwide. It contributes a lot towards the economy of nations and towards the wellbeing of the society. They are highly coupled, interconnected and their interdependencies make them more complex systems. Thus, when a damage occurs in a CI system, its complex interdependencies make it get subjected to cascading effects which propagates faster from one infrastructure to another resulting in wide service degradations which in turn causes economic and societal effects. The propagation of cascading effects of disruptive events could be handled efficiently if the assessment and …

Design, Fabrication, And Characterization Of An Array Of Graphene Based Variable Capacitors, Millicent Nkirote Gikunda

Graduate Theses and Dissertations

Since it was first isolated and characterized in 2004, graphene has shown the potential for a technological revolution. This is due to its amazing physical properties such as high electrical conductivity, high thermal conductivity, and extreme flexibility. Freestanding graphene membranes naturally possesses an intrinsic rippled structure, and these ripples are in constant random motion even room temperatures. Occasionally, the ripples undergo spontaneous buckling (change of curvature from concave to convex and vice versa) and the potential energy associated with this is a double well potential. This movement of graphene is a potential source of vibrational energy.

In this dissertation, we …

High Power Density And High Efficiency Converter Topologies For Renewable Energy Conversion And Ev Applications, Dereje Lemma Woldegiorgis

Graduate Theses and Dissertations

This dissertation work presents two novel converter topologies (a three-level ANPC inverter utilizing hybrid Si/SiC switches and an Asymmetric Alternate Arm Converter (AAAC) topology) that are suitable for high efficiency and high-power density energy conversion systems. The operation principle, modulation, and control strategy of these newly introduced converter topologies are presented in detail supported by simulation and experimental results. A thorough design optimization of these converter topologies (Si/SiC current rating ratio optimization and gate control strategies for the three-level ANPC inverter topology and component sizing for the asymmetric alternate arm converter topology) are also presented.

Performance comparison of the proposed …

A Novel Data Lineage Model For Critical Infrastructure And A Solution To A Special Case Of The Temporal Graph Reachability Problem, Ian Moncur

Graduate Theses and Dissertations

Rapid and accurate damage assessment is crucial to minimize downtime in critical infrastructure. Dependency on modern technology requires fast and consistent techniques to prevent damage from spreading while also minimizing the impact of damage on system users. One technique to assist in assessment is data lineage, which involves tracing a history of dependencies for data items. The goal of this thesis is to present one novel model and an algorithm that uses data lineage with the goal of being fast and accurate. In function this model operates as a directed graph, with the vertices being data items and edges representing …

Modeling Damage Spread, Assessment, And Recovery Of Critical Systems, Justin Burns

Graduate Theses and Dissertations

Critical infrastructure systems have recently become more vulnerable to attacks on their data systems through internet connectivity. If an attacker is successful in breaching a system’s defenses, it is imperative that operations are restored to the system as quickly as possible. This thesis focuses on damage assessment and recovery following an attack. A literature review is first conducted on work done in both database protection and critical infrastructure protection, then the thesis defines how damage affects the relationships between data and software. Then, the thesis proposes a model using a graph construction to show the cascading affects within a system …

The Effects Of Metronomic And Maximum-Tolerated Dose Chemotherapy In Colorectal Cancer Angiogenesis: A Combined Approach Using Endoscopic Diffuse Reflectance Spectroscopy And Mrna Expression, Ariel Isaac Mundo Ortiz

Graduate Theses and Dissertations

Colorectal cancer (CRC) continues to be one of the most incident and deadliest types of cancer worldwide. Chemotherapy has proven effective to reduce tumor burden for CRC patients, but there are several disadvantages associated with the use of mainstay maximtolerated dose (MTD) chemotherapeutic strategies. Metronomic chemotherapy (MET) has been developed as an alternative that addresses the shortcomings of maximum-tolerated dose chemotherapy but so far its effectiveness as a neoadjuvant strategy for CRC has not been explored.

This dissertation uses a combined optics and molecular biology approach (using diffuse reflectance spectroscopy and mRNA expression) to study the changes in angiogenesis and …

Diffusive Dynamics Of Biological Macromolecules In The Cytoplasm Of Live Bacteria, Asmaa Sadoon

Graduate Theses and Dissertations

Bacteria are small organisms that play important roles in our bodies and in maintaining our surrounding environment. However, bacterial infections are considered as one of the health diseases that threatens the lives of humans. Resistance of bacteria to antibiotics has made treating bacterial infections more challenging. With the emergence of many developed optical techniques, it has become possible to study various biological mechanisms of molecules inside these small organisms with high resolution and precise localization. In this research, single particle tracking photoactivation localization microscopy (sptPALM) technique was used to investigate the dynamics of fluorescent histonelike nucleoid-structuring proteins (H-NS) in live …

Cyanobacterial And Microcystin Response To Nutrient Additions At Lake Fayetteville Throughout The 2021 Growing Season, Lillie Haddock

Graduate Theses and Dissertations

Harmful Algal Blooms (HABs) are becoming a global concern due to their increasing distribution, frequency, intensity, and the occurrence of toxins. While it is known that eutrophication influences algal blooms, there is less known about what triggers these HABs to produce toxins, especially microcystin. In this study, we conducted 21 community bioassays at Lake Fayetteville, a hypereutrophic reservoir in Fayetteville, Arkansas, from April-November 2021 to examine how the addition of phosphorous and nitrogen influence cyanobacteria concentrations, microcystin concentrations, and microcystin toxin production. These experiments included a control, nitrogen (1.0 mg/L as KNO3), low phosphorus (0.025 mg/L as K2HPO4), high phosphorus …

Development Of A Long-Read Sequencing Protocol To Assess The Precision And Efficacy Of Gene Editing For Duchenne Muscular Dystrophy, Landon Andrew Burcham

Graduate Theses and Dissertations

This work establishes a method for assessing on-target precision due to CRISPR-Cas9 gene editing, especially within the context of exon skipping therapy for Duchenne Muscular Dystrophy. The proposed method utilizes an Oxford nanopore long-read sequencing approach to sequence amplified regions of DNA that have been edited using CRISPR-Cas9. NIH3T3 and C2C12 cell lines were treated with a dual-guide CRISPR-Cas9 system, that targets and deletes exon 23 from the DMD gene in mouse samples. Deletion PCR revealed deletion of exon 23 in both DNA and cDNA samples. Additionally, sequencing using Oxford Nanopore revealed targeted exon 23 deletion as the most prevalent …

Analysis And Optimization Of The Two-Phase Series Capacitor Buck Dc-Dc Converter, Salahaldein Ali Aboajila Ahmed

Graduate Theses and Dissertations

Current sharing schemes for conventional multi-phase converters are based on sensing each phase current to deliver the current information to their controllers. In conventional buck converters, this fact may require a preset current sharing ratio at the expense of efficiency, which eventually requires a larger sensing circuit to achieve the sensing accuracy of each phase. Introducing the concept of automatic current sharing is one of the solutions to tackle this issue. Automatic current sharing (Current Sharing Mechanism CSM) is an advanced way to distribute heat generation in multi-phase switching topologies at full load. A two-phase series capacitor buck converter (2-pscB) …

Photoassisted Nanoscale Memory Resistors, Amir Shariffar

Graduate Theses and Dissertations

Memristors or memory resistors are promising two-terminal devices, which have the potential to revolutionize current electronic memory technologies. Memristors have been extensively investigated and reported to be practical devices, although they still suffer from poor stability, low retention time, and laborious fabrication processes.

The primary aim of this project was to achieve a device structure of quantum dots or thin films to address a fundamental challenge of unstable resistive switching behavior in memristors. Moreover, we aimed to investigate the effects of light illumination in terms of intensity and wavelength on the performance of the fabricated memristor. The parameters such as …

The Impact Of Reliability In Conceptual Design - An Integrated Trade-Off Analysis, Tevari James Barker

Graduate Theses and Dissertations

Research presented in this paper focuses on developing models to estimate the systemreliability of Unmanned Ground Vehicles using knowledge and data from similar systems. Traditional reliability approaches often require detailed knowledge of a system and are used in later design stages as well as development, operational test and evaluation, and operations. The critical role of reliability and its impact on acquisition program performance, cost, and schedule motivate the need for improved system reliability models in the early design stages. Reliability is often a stand-alone requirement and not fully included in performance and life cycle cost models. This research seeks to …

Junction Temperature Estimation Of Silicon Carbide Power Module Using Internal Gate Resistance As Temperature Sensitive Electrical Parameter, Michael Sykes

Graduate Theses and Dissertations

The junction temperature of a power module is measured non-intrusively and uninterrupted in its application by analyzing the dependency of gate resistance to temperature. The circuit configuration proposed consists of altering the gate loop path and adding a basic peak detection circuit with an added low-pass filter to accurately measure the small differences seen during a temperature change on the internal gate resistance. The testing on this Silicon Carbide power module shows that the internal gate resistance has a positive temperature coefficient. This causes the current and the voltage drop on the gate loop sensing resistance to reduce as the …

Optimizing Virus Prefiltration For Biopharmaceutical Manufacturing, Solomon Isu

Graduate Theses and Dissertations

Virus filters are single-use devices that use a size-based separation process. In virus filters, contaminating virus particles are retained while the therapeutic molecules pass through the membrane pores. Virus filters are an essential component of the overall virus clearance strategy. Sections 1 and 2 of this dissertation provide an introduction and extensive review of monoclonal antibody (mAb) process development, where virus filtration is pivotal. In section 3, prefiltration studies were performed with an industrially relevant IgG1 type mAb using adsorptive and size-exclusion-based prefilters with different mechanisms of action. This mAb has an isoelectric point range of 7.1 to 8.0 and …

Predicting The Likelihood And Scale Of Wildfires In California Using Meteorological And Vegetation Data, Matthew Walters

Graduate Theses and Dissertations

Wildfires have devastating ecological, environmental, economical, and public health impacts through the deterioration of water and air quality, CO2 emissions, property damage, and lung illnesses. The early detection and prevention of wildfires allow for the minimization of these risks. The use of Artificial Intelligence (AI) in wildfire detection and prediction has been highly researched as a tool to assist firefighters in stopping wildfires in its early stages. The three common wildfire prediction categories include image and video detection, behavior prediction, and susceptibility prediction. Data such as climate, weather, vegetation, satellite images, and historical wildfire data is most commonly used. Many …

Diffusive Dynamics Of Biological Macromolecules In The Cytoplasm Of Live Bacteria, Asmaa Ali Sadoon

Graduate Theses and Dissertations

Bacteria are small organisms that play important roles in our bodies and in maintaining our surrounding environment. However, bacterial infections are considered as one of the health diseases that threatens the lives of humans. Resistance of bacteria to antibiotics has made treating bacterial infections more challenging. With the emergence of many developed optical techniques, it has become possible to study various biological mechanisms of molecules inside these small organisms with high resolution and precise localization. In this research, single particle tracking photoactivation localization microscopy (sptPALM) technique was used to investigate the dynamics of fluorescent histonelike nucleoid-structuring proteins (H-NS) in live …

Framework Of Hardware Trojan Detection Leveraging Structural Checking Tool, Rafael Dacanay Del Carmen

Graduate Theses and Dissertations

Since there is a significant demand for obtaining third-party soft Intellectual Property (IP) by first-party integrated circuit (IC) vendors, it is becoming easier for adversaries to insert malicious logic known as hardware Trojans into designs. Due to this, vendors need to find ways to screen the third-party IPs for possible security threats and then mitigate them. The development of the Structural Checking (SC) tool provides a solution to this issue. This tool analyzes the structure of an unknown soft IP design and creates a network of all the signals within the design and how they are connected to each other. …