Engineering Commons^™

Kinetics Study Of The Hydrodeoxygenation Of Xylitol Over A ReoX-Pd/Ceo2 Catalyst, Blake Macqueen, Michael Royko, Bradie S. Crandall, Andreas Heyden, Yomaira J. Pagán-Torres, Jochen A. Lauterbach

Faculty Publications

In this study, we elucidate the reaction kinetics for the simultaneous hydrodeoxygenation of xylitol to 1,2-dideoxypentitol and 1,2,5-pentanetriol over a ReOx-Pd/CeO2 (2.0 weight% Re, 0.30 weight% Pd) catalyst. The reaction was determined to be a zero-order reaction with respect to xylitol. The activation energy was elucidated through an Arrhenius relationship as well as non-Arrhenius kinetics. The Arrhenius relationship was investigated at 150–170◦ C and a constant H2 pressure of 10 bar resulting in an activation energy of 48.7 ± 10.5 kJ/mol. The investigation of non-Arrhenius kinetics was conducted at 120–170◦ C and a sub-Arrhenius relation was elucidated with activation energy …

Model And Data, Equilibrium Of Self-Formed, Single-Thread, Sand-Bed Rivers, Enrica Viparelli, Esther C. Eke

Faculty Publications

This submission contains the following files, also uploaded as Supplementary Information for the manuscript Equilibrium of self-formed, single-thread, sand-bed rivers submitted after major revisions to the AGU journal Geophysical Research Letters.

Excel file with embedded macro Equilibrium_calculator.xlxm, contains the solver of the analytical model presented in the manuscript.

Excel file Equilibrium_results.xlxs contains model data used to generate the plots.

An Estimate Of The Pitting Strength Of Steel Materials, Edward E. Osakue, Lucky Anetor, Kendall Harris

Faculty Publications

A single expression for estimating the nominal pitting strength of steel materials, based on surface hardness, is developed from first principles for a reliability of 99% at 107 load cycles. It requires the hardness values to be measured in Vicker’s hardness scale. The expression may be used for any steel material processed by hot rolling, cold drawing, quenching and tempering or case-hardening. The formulation incorporates a nominal design factor at 99% reliability which is estimated from a probabilistic model based on the lognormal probability density function. Pitting strength estimates from the expression are compared with those of American Gear Manufacturers …

Kinetics Study Of The Hydrodeoxygenation Of Xylitol Over A ReoX-Pd/Ceo2 Catalyst, Blake Macqueen, Michael Royko, Bradie S. Crandall, Andreas Heyden, Yomaira J. Pagán-Torres, Jochen A. Lauterbach

Faculty Publications

In this study, we elucidate the reaction kinetics for the simultaneous hydrodeoxygenation of xylitol to 1,2-dideoxypentitol and 1,2,5-pentanetriol over a ReOx-Pd/CeO2 (2.0 weight% Re, 0.30 weight% Pd) catalyst. The reaction was determined to be a zero-order reaction with respect to xylitol. The activation energy was elucidated through an Arrhenius relationship as well as non-Arrhenius kinetics. The Arrhenius relationship was investigated at 150–170◦ C and a constant H2 pressure of 10 bar resulting in an activation energy of 48.7 ± 10.5 kJ/mol. The investigation of non-Arrhenius kinetics was conducted at 120–170◦ C and a sub-Arrhenius relation was elucidated with activation energy …

A Comparison Of Aerodynamic Models For Optimizing The Takeoff And Transition Of A Bi-Wing Tailsitter, Ryan Anderson, Jacob Willis, Jacob Johnson, Andrew Ning, Randal Beard

Faculty Publications

Electric vertical takeoff and landing (eVTOL) aircraft take advantage of distributed electric propulsion as well as aerodynamic lifting surfaces to take off vertically and perform long-duration flights. Complex aerodynamic interactions and a hard-to-predict transition maneuver from hover to wing-borne flight are one challenge in their development. To address this, we compare three different interaction models of varying fidelity for optimizing the transition trajectory of a biplane tailsitter. The first model accounts for simplified rotor-on-wing interactions using momentum theory, while the other two account for wing-on-wing interactions using a vortex lattice method and rotor-on-wing aerodynamic interactions using blade element momentum theory. …

Optimization Of Turbine Tilt In A Wind Farm, James Cutler, Andrew P.J. Stanley, Jared J. Thomas, Andrew Ning

Faculty Publications

Wind farm power production is significantly affected by upstream turbines creating wakes of slower wind speeds that overlap the rotor swept areas of downstream turbines. By optimizing the tilt angle of the turbines in a farm, wakes may be deflected away from downstream turbines, increasing the overall energy production. In this study, we optimized the tilt angle of turbines in a wind farm to maximize energy production. We used an analytic wake model modified for gradient-based optimization to consider wake deflection from tilt. We considered optimizing the tilt angle of each turbine assuming that it remained fixed for the lifetime …

Reducing Wind Farm Power Variance From Wind Direction Using Wind Farm Layout Optimization, Bertelsen Gagakuma, Andrew P.J. Stanley, Andrew Ning

Faculty Publications

This paper investigates reducing power variance caused by different wind directions by using wind farm layout optimization. The problem was formulated as a multi-objective optimization. The ε−constraint method was used to solve the bi-objective problem in a two-step optimization framework where two sequential optimizations were performed. The first was maximizing the mean wind farm power alone and the second was minimizing the power variance with a constraint on the mean power. The results show that the variance in power estimates can be greatly reduced, by as much as 30%, without sacrificing mean plant power for the different farm sizes and …

User Guide For Dust Modeling Using Cmaq 5.3.1 And Wrf 4.2.1, Zachary D. Lawless, Ariel S. Cable, Cameron B. Van Dyke, Bradley R. Adams

Faculty Publications

Researchers at Brigham Young University (BYU) have developed a software framework for modeling dust emission and transport using the Community Multiscale Air Quality (CMAQ) modeling system in conjunction with the Weather Research and Forecasting (WRF) model and other utility programs. This framework uses meteorological data, land use data, and soil properties to predict dust concentrations for a specified area. This User Guide describes the start-to-finish process required to install and utilize relevant software to calculate and visualize dust concentrations. Note that the examples and figures provided in the guide are specific to Utah in the western United States, where this …

Quantifying The Effects Of Aircraft Engine Upgrades On Operating And Support Costs, Bradford A. Myers, Edward D. White, Jonathan D. Ritschel, R. David Fass

Faculty Publications

For fixed wing aircraft within the U.S. Air Force, Operating and Support (O&S) costs encompass a large portion of total life cycle costs. O&S costs include fuel, maintenance, and engine upgrades. To the authors’ knowledge, no study to date has attempted to empirically quantify the realized effects of new aircraft engines on sustainment costs. Utilizing the Air Force Total Ownership Cost database, they focused on new engines appearing on the C-5s, C-130s, and C-135s. Although narrow in scope, results suggest newer engines have lower fuel costs. Maintenance costs for newer engines were not consistently higher or lower than the engines …

Agile Software Development: Creating A Cost Of Delay Framework For Air Force Software Factories, J. Goljan, Jonathan D. Ritschel, Scott Drylie, Edward D. White

Faculty Publications

The Air Force software development environment is experiencing a paradigm shift. The 2019 Defense Innovation Board concluded that speed and cycle time must become the most important software metrics if the US military is to maintain its advantage over adversaries.¹ This article proposes utilizing a cost-o­f-d­elay (CoD) framework to prioritize projects toward optimizing readiness. Cost-­of-d­elay is defined as the economic impact resulting from a delaying product delivery or, said another way, opportunity cost. In principle, CoD assesses the negative impacts resulting from changes to the priority of a project.

Integrating Cost As A Decision Variable In Wargames, Joshua N. Reese, Jonathan D. Ritschel, Brent T. Langhals, Ryan D. Engle

Faculty Publications

The US military can no longer afford to be reactive, leaving critical cost analyses to the months and years following operations or full-scale conflicts. By leveraging cost in wargaming as part of the Joint planning process, DOD can provide Congress and the American taxpayers a range of potential costs associated with various military engagements that reflect fiscal and operational realities.

Resilience For Multi-Filter All-Source Navigation Framework With Integrity, Jonathon S. Gipson, Robert C. Leishman

Faculty Publications

The Autonomous and Resilient Management of All-source Sensors (ARMAS) framework monitors residual-space test statistics across unique sensor-exclusion banks of filters, (known as subfilters) to provide a resilient, fault-resistant all-source navigation architecture with assurance. A critical assumption of this architecture, demonstrated in this paper, is fully overlapping state observability across all subfilters. All-source sensors, particularly those that only provide partial state information (altimeters, TDoA, AOB, etc.) do not intrinsically meet this requirement.
This paper presents a novel method to monitor real-time overlapping position state observability and introduces an "observability bank" within the ARMAS framework, known as Stable Observability Monitoring (SOM). SOM …

Understanding Flow Characteristics In Metal Additive Manufacturing, Carl R. Hartsfield, Travis E. Shelton, Gregory R. Cobb, Ryan A. Kemnitz, Joseph Weber

Faculty Publications

In fluid flow, the frictional effects from interior surfaces of flow components create pressure loss across the surface. Understanding this inherent pressure loss due to friction and other phenomena is important when designing a flow system. For conventional manufacturing, friction loss has been empirically studied and is well known in the engineering community. However, newer manufacturing techniques, such as laser powder bed fusion (LPBF), an additive manufacturing technique, need to be understood. The inherent flow conditions resulting from the additive processes were studied. Test samples were printed with the flow path oriented in the vertical direction with different channel diameters …

Impact Of Neutron Energy On Asteroid Deflection Performance, Lansing S. Horan Iv, Darren E. Holland, Megan Bruck Syal, James E. Bevins, Joseph W. Wasem

Faculty Publications

In the future, a hazardous asteroid will find itself on a collision course with Earth. For asteroids of moderate size or larger, a nuclear device is one of humanity's only technologies capable of mitigating this threat via deflection on a timescale of less than a decade. This work examined how the output neutron energy from a nuclear device standoff detonation affects the deflection of a notional asteroid that is 300 meters in diameter and composed of silicon dioxide at a bulk density of 1.855 g/cm³. 14.1 MeV and 1 MeV neutron energy sources were modeled in MCNP to …

Spectral Absorption Coefficient Of Additive Manufacturing Materials, Nicholas J. Wallace, Matthew R. Jones, Nathan B. Crane

Faculty Publications

Active thermography techniques are of interest for quality assurance of additive manufacturing processes. However, accurate measurements of thermophysical properties of materials are required to successfully implement active thermography. In particular, the spectral absorption coefficient of materials commonly used in additive manufacturing must be known to accurately predict the spatial distribution of thermal energy generated from absorption of power emitted by a laser or pulsed flash lamp. Accurate measurements of these optical properties are also needed to develop greater understanding of additive manufacturing processes that rely on radiative heat transfer to fuse powders. This paper presents spectral absorption coefficient measurements and …

Modified C-17 Taxi Procedures: A Fuel Cost Savings Exploration, Michael Wells, Michael Krester, Benjamin Hazen, Jeffery D. Weir

Faculty Publications

Purpose — This study aims to explore the viability of using C-17 reduced-engine taxi procedures from a cost savings and capability perspective. Design/methodology/approach — This study model expected engine fuel flow based on the number of operational engines, aircraft gross weight (GW) and average aircraft groundspeed. Using this model, the research executes a cost savings simulation estimating the expected annual savings produced by the proposed taxi methodology. Operational and safety risks are also considered. Findings — The results indicate that significant fuel and costs savings are available via the employment of reduced-engine taxi procedures. On an annual basis, the mobility …

Comparing Greedy Constructive Heuristic Subtour Elimination Methods For The Traveling Salesman Problem, Petar Jackovich, Bruce A. Cox, Raymond R. Hill

Faculty Publications

Purpose — This paper aims to define the class of fragment constructive heuristics used to compute feasible solutions for the traveling salesman problem (TSP) into edge-greedy and vertex-greedy subclasses. As these subclasses of heuristics can create subtours, two known methodologies for subtour elimination on symmetric instances are reviewed and are expanded to cover asymmetric problem instances. This paper introduces a third novel subtour elimination methodology, the greedy tracker (GT), and compares it to both known methodologies. Design/methodology/approach — Computational results for all three subtour elimination methodologies are generated across 17 symmetric instances ranging in size from 29 vertices to 5,934 …

Effective Early Treatment Of Microcystis Exponential Growth And Microcystin Production With Hydrogen Peroxide And Hydroxyapatite, Ian Struewing, Nathan Sienkiewicz, Chiqian Zhang, Nicholas Dugan, Jingrang Lu

Faculty Publications

: Mitigating cyanotoxin production is essential to protecting aquatic ecosystems and public health. However, current harmful cyanobacterial bloom (HCB) control strategies have significant shortcomings. Because predicting HCBs is difficult, current HCB control strategies are employed when heavy HCBs have already occurred. Our pilot study developed an effective HCB prediction approach that is employed before exponential cyanobacterial growth and massive cyanotoxin pro‐ duction can occur. We used a quantitative polymerase chain reaction (qPCR) assay targeting the toxin‐encoding gene mcyA to signal the timing of treatment. When control measures were applied at an early growth stage or one week before the exponential …

A Survey On Subsurface Signal Propagation, Usman Raza, Abdul Salam

Faculty Publications

Wireless Underground Communication (WUC) is an emerging field that is being developed continuously. It provides secure mechanism of deploying nodes underground which shields them from any outside temperament or harsh weather conditions. This paper works towards introducing WUC and give a detail overview of WUC. It discusses system architecture of WUC along with the anatomy of the underground sensor motes deployed in WUC systems. It also compares Over-the-Air and Underground and highlights the major differences between the both type of channels. Since, UG communication is an evolving field, this paper also presents the evolution of the field along with the …

One-Dimensional Turbulence (Odt): Computationally Efficient Modeling And Simulation Of Turbulent Flows, Victoria B. Stephens, David O. Lignell

Faculty Publications

One-dimensional turbulence (ODT) is an accurate and computationally efficient model for simulating turbulent flows. ODT has been applied to a wide range of flow problems including reaction, multiphase, differential diffusion, heat release, buoyancy, and wall flows. Applications include use as a standalone model and as a closure for large-eddy simulation (LES). Its strength lies in the ability to capture a full range of turbulent length and time scales. The ODT model is strongly coupled with its implementation, complicating its formulations. We present a modern, open-source, object-oriented C++ implementation of ODT. The code described here and made available online can be …

A Computational Investigation Of The Interstitial Oxidation Thermodynamics Of A Mo-Nb-Ta-W High Entropy Alloy Beyond The Dilute Regime, Adib J. Samin

Faculty Publications

High entropy alloys (HEAs) are promising candidates for high-temperature structural material applications. Oxidation is a major factor that must be accounted for when designing such materials and it is thus important to study the oxidation behavior of HEAs to enable the optimum design of next generation materials. In this study, the thermodynamic behavior of interstitial oxygen in a Mo-Nb-Ta-W high entropy alloy was explored beyond the dilute limit. This was accomplished by sampling configurations of the HEA and HEA-oxygen systems from an isothermal–isobaric ensemble using a series of first-principle-based Monte Carlo simulations. It was found that the interstitial oxygen had …

Improving Tolerance Control On Modular Construction Project With 3d Laser Scanning And Bim: A Case Study Of Removable Floodwall Project, Huimin Li, Chengyi Zhang, Siyuan Song, Sevilay Demirkesen, Ruidong Chang

Faculty Publications

Quality control is essential to a successful modular construction project and should be enhanced throughout the project from design to construction and installation. The current methods for analyzing the assembly quality of a removable floodwall heavily rely on manual inspection and contact-type measurements, which are time-consuming and costly. This study presents a systematic and practical approach to improve quality control of the prefabricated modular construction projects by integrating building information modeling (BIM) with three-dimensional (3D) laser scanning technology. The study starts with a thorough literature review of current quality control methods in modular construction. Firstly, the critical quality control procedure …

Noise And Detectivity Limits In Organic Shortwave Infrared Photodiodes With Low Disorder, Zhenghui Wu, Ning Li, Naresh Eedugurala, Jason D. Azoulay, Dong Seok Leem, Tse Nga Ng

Faculty Publications

© 2020, The Author(s). To achieve high detectivity in infrared detectors, it is critical to reduce the device noise. However, for non-crystalline semiconductors, an essential framework is missing to understand and predict the effects of disorder on the dark current. This report presents experimental and modeling studies on the noise current in exemplar organic bulk heterojunction photodiodes, with 10 donor–acceptor combinations spanning wavelength between 800 and 1600 nm. A significant reduction of the noise and higher detectivity were found in devices using non-fullerene acceptors (NFAs) in comparison to those using fullerene derivatives. The low noise in NFA blends was attributed …

An Analysis Of The Benefits And Difficulties Of Aerial Magnetic Vector Navigation, Aaron J. Canciani, Christopher J. Brennan

Faculty Publications

Recent successful flight tests have demonstrated scalar magnetic anomaly navigation to be a viable GPS-alternative navigation system. These flight tests matched magnetic field measurements to maps of the Earth's crustal magnetic field in order to navigate. Scalar magnetic navigation uses only the magnetic field intensity, not direction, in order to navigate. While it appears obvious to extend aerial magnetic navigation to use the full vector field, in practice there are substantial obstacles to doing so. This article explores the key challenges of magnetic vector navigation including current sensor limitations, lack of high frequency magnetic vector maps of the Earth's crust, …

Homotopy Simulation Of Dissipative Micropolar Flow And Heat Transfer From A Two-Dimensional Body With Heat Sink Effect: Applications In Polymer Coating, O. A. Bég, B. Vasu, A. K. Ray, T. A. Beg, A. Kadir, H. J. Leonard, Rama S. R. Gorla

Faculty Publications

Non-Newtonian flow from a wedge constitutes a fundamental problem in chemical engineering systems and is relevant to processing of polymers, coating systems, etc. Motivated by such applications, the homotopy analysis method (HAM) was employed to obtain semi-analytical solutions for thermal convection boundary layer flow of incompressible micropolar fluid from a two-dimensional body (wedge). Viscous dissipation and heat sink effects were included. The non-dimensional boundary value problem emerges as a system of nonlinear coupled ordinary differential equations, by virtue of suitable coordinate transformations. The so-called Falkner-Skan flow cases are elaborated. Validation of the HAM solutions was achieved with earlier simpler models, …

Swarm-Based Design Of Proportional Integral And Derivative Controllers Using A Compromise Cost Function: An Arduino Temperature Laboratory Case Study, Paulo De Moura Oliveira, John Hedengren, Eduardo Solteiro Pires

Faculty Publications

Simple and easy to use methods are of great practical demand in the design of Proportional, Integral, and Derivative (PID) controllers. Controller design criteria are to achieve a good set-point tracking and disturbance rejection with minimal actuator variation. Achieving satisfactory trade-offs between these performance criteria is not easily accomplished with classical tuning methods. A particle swarm optimization technique is proposed to design PID controllers. The design method minimizes a compromise cost function based on both the integral absolute error and control signal total variation criteria. The proposed technique is tested on an Arduino-based Temperature Control Laboratory (TCLab) and compared with …

Civilian Pepper Spray For Self Defense: Understanding User Perception And Impact Of Design On User Performance, David Strybel, Anil R. Kumar

Faculty Publications

Pepper spray is widely used in the US, and is marketed as an effective self-defense device. While pepper spray can be useful in deterring an attacker, many pepper spray owners do not have any experience using it. There is a dearth of published studies that focus on civilian pepper-spray use, not to mention first time pepper-spray users. A study to analyze pepper-spray designs with first-time users, to see how the design, specifically the safety mechanism, affects response time and overall performance would be helpful. The study was conducted in 2 parts – a survey to understand user perception, and a …

Writing Standards-Based Lesson Plans To Standards For Technological And Engineering Literacy, Scott Bartholomew, Thomas Loveland, Vanessa Santana

Faculty Publications

While written lesson plans may seem like a lot of work, with little purpose or benefit to new teachers, a well-written lesson plan is quite valuable for many reasons. The process of writing lesson plans at the beginning of one’s teaching career can be very time-consuming (Arnett-Hartwick and Cannon, 2019); however, the development of sequenced lessons that result in effective learning must be organized and articulate, not done haphazardly. Designing a lesson through a written document can help a teacher see the pattern, flow, and implications of a lesson and how it will help all students; this can be especially …

Using Reactive Dissipative Particle Dynamics To Understand Local Shape Manipulation Of Polymer Vesicles, Qinyu Zhu, Timothy R. Scott, Douglas R. Tree

Faculty Publications

Biological cells have long been of interest to researchers due to their capacity to actively control their shape. Accordingly, there is significant interest in generating simplified synthetic protocells that can alter their shape based on an externally or internally generated stimulus. To date, most progress has been made towards controlling the global shape of a protocell, whereas less is known about generating a local shape change. Here, we seek to better understand the possible mechanisms for producing local morphological changes in a popular protocell system, the block copolymer vesicle. Accordingly, we have combined Dissipative Particle Dynamics (DPD) and the Split …

Development Of Metallic Nuclear Material Purification Process Via Simultaneous Chlorination And Volatilization, Parker Okabe, Devin Rappleye, Matthew Newton, Michael F. Simpson

Faculty Publications

A purification process involving simultaneous chlorination and volatilization is reported using aluminum, iron, gallium, and uranium separation from cerium metal as the demonstration system. Anhydrous Cl₂ gas was reacted with the metal after it had been converted to small particles of hydride at temperatures ranging from 523 to 973 K. Each of the impurities should form chlorides with relatively high saturated vapor pressures. The objective of the process was to volatilize these chlorides after first achieving near-complete conversion of the metals to hydride and then chlorides. Complete conversion of hydrides to chlorides could not be achieved using …