Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Faculty Publications

Discipline
Institution
Keyword
Publication Year
File Type

Articles 2311 - 2340 of 3295

Full-Text Articles in Engineering

Threshold Power Of Canonical Antennas For Inducing Sar At Compliance Limits In The 300-3000 Mhz Frequency Range, Mohammod Ali, Mark G. Douglas, Abu T.M. Sayem, Antonio Faraone, Chung-Kwang Chou Feb 2007

Threshold Power Of Canonical Antennas For Inducing Sar At Compliance Limits In The 300-3000 Mhz Frequency Range, Mohammod Ali, Mark G. Douglas, Abu T.M. Sayem, Antonio Faraone, Chung-Kwang Chou

Faculty Publications

A study of the specific absorption rate (SAR) in an exposed body induced by canonical antennas is presented, with the aim of determining an upper bound for the antenna transmit power that demonstrates that a product is inherently compliant with internationally accepted radio frequency (RF) exposure limits. Starting from the fundamental limits in antenna quality factor (Q) and the corresponding bandwidth, several antenna sizes are selected, and their SAR distributions are computed using the method of moments (MoM) and finite-difference time domain (FDTD) method in the frequency range 300-3000 MHz. The threshold powers are then determined, below which the peak …

Go to article

Modeling And Sensitivity Analysis Of Acoustic Release Of Doxorubicin From Unstabilized Pluronic P105 Using An Artificial Neural Network Model, Ghaleb A. Husseini, Nabil M. Abdel-Jabbar, Farouq S. Mjalli, William G. Pitt Feb 2007

Modeling And Sensitivity Analysis Of Acoustic Release Of Doxorubicin From Unstabilized Pluronic P105 Using An Artificial Neural Network Model, Ghaleb A. Husseini, Nabil M. Abdel-Jabbar, Farouq S. Mjalli, William G. Pitt

Faculty Publications

This paper models steady state acoustic release of Doxorubicin (Dox) from Pluronic P105micelles using Artificial Neural Networks (ANN). Previously collected release data werecompiled and used to train, validate, and test an ANN model. Sensitivity analysis was thenperformed on the following operating conditions: ultrasonic frequency, power density, Plu-ronic P105 concentration, and temperature. The model showed that drug release was mostefficient at lower frequencies. The analysis also demonstrated that release increases as thepower density increases. Sensitivity plots of ultrasound intensity revealed a drug releasethreshold of 0.015 W/cm2 and 0.38 W/cm2 at 20 and 70 kHz, respectively. The presence ofa power density threshold …

Go to article

Frequency Response Of Solid-State Impact Ionization Multipliers, Joshua Beutler, Carlton S. Clauss, Michael S. Johnson, Aaron R. Hawkins, Mike D. Jack, George R. Chapman, Ken Kosai Jan 2007

Frequency Response Of Solid-State Impact Ionization Multipliers, Joshua Beutler, Carlton S. Clauss, Michael S. Johnson, Aaron R. Hawkins, Mike D. Jack, George R. Chapman, Ken Kosai

Faculty Publications

A study of the frequency response of solid-state impact ionization multipliers (SIMs) is presented that emphasizes the role of resistive and capacitive elements of the device to establish response limitations. SIMs are designed to amplify input currents from an external source through the impact ionization mechanism. An equivalent circuit model for the SIM is developed based on its current versus voltage characteristics, which is used to derive a frequency response model. Theoretical frequency response matches very closely to measured responses for first generation SIM devices constructed on p-type silicon epitaxial layers with nickel silicide Schottky contact injection points. Devices were …

Go to article

Automatic Transmit Power Control Of A Digital Fixed Wireless Link With Co-Channel Interference, Robert H. Morelos-Zaragoza, Kyoung-Whoan Suh, Joo-Hwan Lee Jan 2007

Automatic Transmit Power Control Of A Digital Fixed Wireless Link With Co-Channel Interference, Robert H. Morelos-Zaragoza, Kyoung-Whoan Suh, Joo-Hwan Lee

Faculty Publications

In this paper, a study is presented of the dynamic behavior of an automatic transmit power control (ATPC) loop in a single fixed wireless system (FWS) link subject to multipath fading and an uncorrelated co-channel interferer that does not use ATPC (this represents a so-called non-ATPC FWS link or a fixed satellite link). Fundamental questions include the sensitivity of an ATPC link to multipath interference and the co-channel interference that may be caused by a non-ATPC interferer. In the context of the present project, a good example of a non-ATPC interferer is a fixed satellite to which one antenna in …

Go to article

Implementation Of A Mems Laboratory Course With Modular, Multidisciplinary Team Projects, S J. Lee, S Gleixner, T R. Hsu, David W. Parent Jan 2007

Implementation Of A Mems Laboratory Course With Modular, Multidisciplinary Team Projects, S J. Lee, S Gleixner, T R. Hsu, David W. Parent

Faculty Publications

No abstract provided.

Go to article

Analysis And Kinetics Of The Sequencing Batch Reactors, Udeme J. Ndon Jan 2007

Analysis And Kinetics Of The Sequencing Batch Reactors, Udeme J. Ndon

Faculty Publications

Fundamental analysis and kinetics of treatment reactors are major topics in environmental engineering literature. These fundamental topics in reactor processes are well known for the ideal batch reactor, the continuous stirred tank reactor, and the plug flow reactor. The sequencing batch reactors (SBRs) are relatively new in the field, but are widely used. Despite the wide application of sequencing batch reactors in the field, information is lacking on the fundamental analysis and kinetics, especially with comparison to the ideal batch reactor. This report presents analysis and kinetics of the sequencing batch reactors and compares the kinetics equations developed with those …

Go to article

Iii Finishing, Lapping, Honing And Polishing: Processes, Characterisation And Novel Techniques-Experimental Research On Ultra-Smooth Surface Polishing Based On Two-Dimensional Vibration Of Liquid, Zhong Ning Guo, X. Z. Huang, Z. G. Huang, Z. Q. Yu, T. M. Yue, Wing Bun Lee Jan 2007

Iii Finishing, Lapping, Honing And Polishing: Processes, Characterisation And Novel Techniques-Experimental Research On Ultra-Smooth Surface Polishing Based On Two-Dimensional Vibration Of Liquid, Zhong Ning Guo, X. Z. Huang, Z. G. Huang, Z. Q. Yu, T. M. Yue, Wing Bun Lee

Faculty Publications

No abstract provided.

Go to article

In-Situ Optimized Pwas Phased Arrays For Lamb Wave Structural Health Monitoring, Lingyu Yu, Victor Giurgiutiu Jan 2007

In-Situ Optimized Pwas Phased Arrays For Lamb Wave Structural Health Monitoring, Lingyu Yu, Victor Giurgiutiu

Faculty Publications

No abstract provided.

Go to article

Simulation Of The Oxygen Reduction Reaction At An Rde In 0.5 M H2So4 Including An Adsorption Mechanism, Qingbo Dong, Shriram Santhanagopalan, Ralph E. White Jan 2007

Simulation Of The Oxygen Reduction Reaction At An Rde In 0.5 M H2So4 Including An Adsorption Mechanism, Qingbo Dong, Shriram Santhanagopalan, Ralph E. White

Faculty Publications

Oxygen reduction on the surface of a rotating disk electrode (RDE) in 0.5 M H2SO4 is simulated by including mass transfer, adsorption, and charge transfer. A generalized model for the adsorption and reaction of several species is introduced. The oxygen reduction reaction is simulated as a limiting case where oxygen is the only species adsorbed, and oxygen reduction is the only reaction that takes place on the surface of the electrode. The model is based on the Nernst–Planck equations for mass transfer and the Butler–Volmer equation for electrochemical kinetics. The simulated polarization curves capture the change in …

Go to article

Exafs Characterization Of Dendrimer‐Derived Pt/Γ‐Al2O3, A. Siani, Oleg S. Alexeev, Christopher T. Williams, Harry J. Ploehn, Michael D. Amiridis Jan 2007

Exafs Characterization Of Dendrimer‐Derived Pt/Γ‐Al2O3, A. Siani, Oleg S. Alexeev, Christopher T. Williams, Harry J. Ploehn, Michael D. Amiridis

Faculty Publications

The various steps involved in the preparation of a Pt/γ‐Al2O3 material using hydroxyl‐terminated generation four (G4OH) PAMAM dendrimers as templates were monitored by EXAFS. The results indicate that Cl ligands in the Pt precursors (H2PtCl6 and K2PtCl4) were partially replaced by aquo ligands upon hydrolysis to form [PtCl3(H2O)3]+ and [PtCl2(H2O)2] species. After interaction of such species with G4OH, Cl ligands from the first coordination shell of Pt were further replaced by nitrogen atoms from the dendrimer interior, …

Go to article

Modeling Li/CfX-Svo Hybrid-Cathode Batteries, Parthasarathy M. Gomadam, Donald R. Merritt, Erik R. Scott, Craig L. Schmidt, Paul M. Skarstad, John W. Weidner Jan 2007

Modeling Li/CfX-Svo Hybrid-Cathode Batteries, Parthasarathy M. Gomadam, Donald R. Merritt, Erik R. Scott, Craig L. Schmidt, Paul M. Skarstad, John W. Weidner

Faculty Publications

A mathematical model is developed that predicts the voltage-capacity behavior of a primary lithium battery containing a hybrid cathode, which combines the high energy density of carbon monofluoride (CFx) and the higher power density of silver vanadium oxide (SVO). The model is developed using material balances and kinetic expressions for each material, extracting kinetic and thermodynamic parameters from data collected on CFx and SVO batteries, and then integrating this information into a hybrid system. The full model is validated by comparing simulations to experimental data on Li/CFx-SVO hybrid-cathode batteries of various designs and for a …

Go to article

Development Of Ruthenium-Based Catalysts For Oxygen Reduction Reaction, Lingyun Liu, Hansung Kim, Jong-Won Lee, Branko N. Popov Jan 2007

Development Of Ruthenium-Based Catalysts For Oxygen Reduction Reaction, Lingyun Liu, Hansung Kim, Jong-Won Lee, Branko N. Popov

Faculty Publications

A process was developed to synthesize ruthenium-based chelate (RuNx) electrocatalysts for the oxygen reduction reaction, using RuCl3 and propylene diammine as the Ru and N precursors, respectively. High-temperature pyrolysis has a critical role in the formation of the catalytic Ru–N sites for oxygen reduction. The RuNx catalyst modified in the presence of nitrogen-containing organic exhibited comparable catalytic activity and selectivity for oxygen reduction to the carbon-supported Pt catalyst in acidic media. The catalyst generates less than 2% hydrogen peroxide during oxygen reduction.

Go to article

Novel Pemfc Cathodes Prepared By Pulse Deposition, Subasri M. Ayyadurai, Yoon-Seok Choi, Prabhu Ganesan, Swaminatha P. Kumaraguru, Branko N. Popov Jan 2007

Novel Pemfc Cathodes Prepared By Pulse Deposition, Subasri M. Ayyadurai, Yoon-Seok Choi, Prabhu Ganesan, Swaminatha P. Kumaraguru, Branko N. Popov

Faculty Publications

A pulse electrodeposition method of preparing thin platinum catalyst layers for polymer electrolyte membrane fuel cell (PEMFC) cathodes has been developed through surface activation of the gas diffusion layer (GDL) by a wetting agent. The performance of the catalyst layer was optimized by wetting agent type, immersion time in the wetting agent, and pulse deposition parameters such as total charge density, peak current density, and duty cycle ratio. The Toff time played a more important role than the Ton time in determining the electrode characteristics such as high concentration of Pt, smaller particle size, and loading. Pt cathodes …

Go to article

Whole Genome Duplications And Contracted Breakpoint Graphs, Max A. Alekseyev, Pavel A. Pevzner Jan 2007

Whole Genome Duplications And Contracted Breakpoint Graphs, Max A. Alekseyev, Pavel A. Pevzner

Faculty Publications

The genome halving problem, motivated by the whole genome duplication events in molecular evolution, was solved by El-Mabrouk and Sankoff in the pioneering paper [SIAM J. Comput., 32 (2003), pp. 754–792]. The El-Mabrouk–Sankoff algorithm is rather complex, inspiring a quest for a simpler solution. An alternative approach to the genome halving problem based on the notion of the contracted breakpoint graph was recently proposed in [M. A. Alekseyev and P. A. Pevzner, IEEE/ACM Trans. Comput. Biol. Bioinformatics, 4 (2007), pp. 98–107]. This new technique reveals that while the El-Mabrouk–Sankoff result is correct in most cases, it does not hold in …

Go to article

Colored De Bruijn Graphs And The Genome Halving Problem, Max A. Alekseyev, Pavel A. Pevzner Jan 2007

Colored De Bruijn Graphs And The Genome Halving Problem, Max A. Alekseyev, Pavel A. Pevzner

Faculty Publications

Breakpoint graph analysis is a key algorithmic technique in studies of genome rearrangements. However, breakpoint graphs are defined only for genomes without duplicated genes, thus limiting their applications in rearrangement analysis. We discuss a connection between the breakpoint graphs and de Bruijn graphs that leads to a generalization of the notion of breakpoint graph for genomes with duplicated genes. We further use the generalized breakpoint graphs to study the Genome Halving Problem (first introduced and solved by Nadia El-Mabrouk and David Sankoff). The El-Mabrouk-Sankoff algorithm is rather complex, and, in this paper, we present an alternative approach that is based …

Go to article

Development Of Method For Synthesis Of Pt–Co Cathode Catalysts For Pem Fuel Cells, Xuguang Li, Héctor R. Colón-Mercado, Gang Wu, Jong-Won Lee, Branko N. Popov Jan 2007

Development Of Method For Synthesis Of Pt–Co Cathode Catalysts For Pem Fuel Cells, Xuguang Li, Héctor R. Colón-Mercado, Gang Wu, Jong-Won Lee, Branko N. Popov

Faculty Publications

A procedure was developed to synthesize a platinum–cobalt (Pt–Co) alloy electrocatalyst for oxygen reduction using Co/C composite as a support. The Pt–Co/C catalysts were synthesized through: (i) chemical oxidation of carbon black, (ii) Co deposition on the oxidized carbon using a chelation method, (iii) chemical treatment in an acidic medium to remove excess of Co on the carbon surface, (iv) Pt deposition onto the Co/C support, and (v) postheat treatment to form the Pt–Co alloy catalyst. The synthesized Pt–Co/C catalyst showed improved activity and long-term stability in polymer electrolyte membrane …

Go to article

Accelerated Testing Method For Pem Fuel Cell Based Uninterrupted Power Supply Systems, Xinyu Huang, Xiaofeng Wang Jan 2007

Accelerated Testing Method For Pem Fuel Cell Based Uninterrupted Power Supply Systems, Xinyu Huang, Xiaofeng Wang

Faculty Publications

Proton exchange membrane fuel cell based power systems are on the verge of commercialization for a number of niche applications where batteries are traditionally used. Uninterrupted power supply (UPS) for wireless communication towers and broadband network relay utilities is one of the targeted application of fuel cell power systems with capacity ranging from one to serveral kilowatts. It is believed that fuel cell based UPS systems can offer considerable advantage when extended backup time is desirable. In order to replace the well-known battery based UPS systems, the reliability and perofrmance of fuel cell based UPS system need to be thoroughly …

Go to article

Demonstration Of Magnetoelectric Scanning Probe Microscopy, Jason R. Hattrick-Simpers, Liyang Dai, Manfred Wuttig, Ichiro Takeuchi, Eckhard Quandt Jan 2007

Demonstration Of Magnetoelectric Scanning Probe Microscopy, Jason R. Hattrick-Simpers, Liyang Dai, Manfred Wuttig, Ichiro Takeuchi, Eckhard Quandt

Faculty Publications

A near-field room temperature scanning magnetic probe microscope has been developed using a laminated magnetoelectric sensor. The simple trilayer longitudinal-transverse mode sensor, fabricated using Metglas as the magnetostrictive layer and polyvinylidene fluoride as the piezoelectric layer, shows an ac field sensitivity of 467±3μV∕Oe in the measured frequency range of 200Hz–8kHz. The microscope was used to image a 2mm diameter ring carrying an ac current as low as 10−5A. ac fields as small as 3×10−10T have been detected.

Go to article

Rapid Structural Mapping Of Ternary Metallic Alloy Systems Using The Combinatorial Approach And Cluster Analysis, C. J. Long, Jason R. Hattrick-Simpers, M. Murakami, R. C. Srivastava, I. Takeuchi, V. L. Karen, X. Li Jan 2007

Rapid Structural Mapping Of Ternary Metallic Alloy Systems Using The Combinatorial Approach And Cluster Analysis, C. J. Long, Jason R. Hattrick-Simpers, M. Murakami, R. C. Srivastava, I. Takeuchi, V. L. Karen, X. Li

Faculty Publications

We are developing a procedure for the quick identification of structural phases in thin film composition spread experiments which map large fractions of compositional phase diagrams of ternary metallic alloy systems. An in-house scanning x-ray microdiffractometer is used to obtain x-ray spectra from 273 different compositions on a single composition spread library. A cluster analysissoftware is then used to sort the spectra into groups in order to rapidly discover the distribution of phases on the ternary diagram. The most representative pattern of each group is then compared to a database of known structures to identify known phases. Using this method, …

Go to article

Short-Time Transient Analysis Of Intercalation Of An Ion Into A Sphere, Sheba Devan, Ralph E. White Jan 2007

Short-Time Transient Analysis Of Intercalation Of An Ion Into A Sphere, Sheba Devan, Ralph E. White

Faculty Publications

A short-time transient analysis is presented for a sinusoidal input potential for a spherical particle. The objective of this work was to extract accurate values of the parameters associated with an intercalation into a spherical particle. These parameters are exchange current density, double-layer capacitance, and diffusion coefficient. The effects of these parameters on the response were examined using a sensitivity analysis, which indicated that optimum frequency values of the input perturbation exist for estimation of these parameters. A procedure is presented to obtain all these parameters using the short-time response. The results show that the short-time analysis is a useful …

Go to article

Analytical Expression For The Impedance Response Of An Insertion Electrode Cell, Godfrey Sikha, Ralph E. White Jan 2007

Analytical Expression For The Impedance Response Of An Insertion Electrode Cell, Godfrey Sikha, Ralph E. White

Faculty Publications

An analytical expression for the impedance response of an insertion cathode/separator/foil anode cell sandwich is presented. The analytical expression includes the impedance contributions from interfacial kinetics, double-layer adsorption, and solution-phase and solid-phase diffusion processes. The validity of the analytical solution is ascertained by comparison with the numerical solution obtained for a LiCoO2 /polypropylene/lithium metal cell. The flexibility of the analytical solution is utilized to analyze various limiting conditions. An expression to estimate solid-phase diffusion coefficient of insertion species in a porous electrode influenced by the solution-phase diffusion process is also derived

Go to article

Simulation Of Polarization Curves For Oxygen Reduction Reaction In 0.5 M H2So4 At A Rotating Ring Disk Electrode, Qingbo Dong, Shriram Santhanagopalan, Ralph E. White Jan 2007

Simulation Of Polarization Curves For Oxygen Reduction Reaction In 0.5 M H2So4 At A Rotating Ring Disk Electrode, Qingbo Dong, Shriram Santhanagopalan, Ralph E. White

Faculty Publications

A cylindrical two-dimensional model based on the Nernst–Planck equations, the Navier–Stokes equation, and the continuity equation is used to simulate the oxygen reduction reaction in 0.5MH2SO4 at a rotating ring disk electrode. Concentration distributions and a potential profile are obtained as a function of the axial and radial distances from the center of the electrode surface. Polarization curves are simulated to interpret experimental results by studying various reaction mechanisms, i.e., the four-electron-transfer reduction of oxygen, the two-electron-transfer reduction of oxygen, a combination of the above two reactions, mechanisms with reduction of peroxide to water, and/or the heterogeneous …

Go to article

Moving Boundary Model For The Discharge Of A Licoo2 Electrode, Qi Zhang, Ralph E. White Jan 2007

Moving Boundary Model For The Discharge Of A Licoo2 Electrode, Qi Zhang, Ralph E. White

Faculty Publications

A moving boundary model in a spherical LiCoO2 particle is presented to account for the diffusion controlled phase transition in LiCoO2 solid particles, and this model is incorporated into a porous electrode model for the LiCoO2 electrode. The simulation results agree well with the experimental data of a LiCoO2 electrode. A study of the flux distribution in the porous electrode shows that the phase transition phenomenon in the LiCoO2particles has a significant effect on the flux distribution by changing the solid phase diffusion resistance in the particles.

Go to article

Parameter Estimation And Model Discrimination For A Lithium-Ion Cell, Shriram Santhanagopalan, Qingzhi Guo, Ralph E. White Jan 2007

Parameter Estimation And Model Discrimination For A Lithium-Ion Cell, Shriram Santhanagopalan, Qingzhi Guo, Ralph E. White

Faculty Publications

Two different models were used to obtain transport and kinetic parameters using nonlinear regression from experimental charge/discharge curves of a lithium-ion cell measured at 35°C under four rates, C/5, C/2, 1C, and 2C, where the C rate is 1.656A . The Levenberg-Marquardt method was used to estimate parameters in the models such as the diffusion of lithium ions in the positive electrode. A confidence interval for each parameter was also presented. The parameter values lie within their confidence intervals. The use of statistical weights to correct for the scatter in experimental data as well as to treat one set of …

Go to article

Effect Of Water On The Electrochemical Oxidation Of Gas-Phase So2 In A Pem Electrolyzer For H2 Production, John Staser, Ramaraja P. Ramasamy, Premkumar Sivasubramanian, John W. Weidner Jan 2007

Effect Of Water On The Electrochemical Oxidation Of Gas-Phase So2 In A Pem Electrolyzer For H2 Production, John Staser, Ramaraja P. Ramasamy, Premkumar Sivasubramanian, John W. Weidner

Faculty Publications

Water plays a critical role in producing hydrogen from the electrochemical oxidation of SO2 in a proton exchange membrane (PEM) electrolyzer. Not only is water needed to keep the membrane hydrated, but it is also a reactant. One way to supply water is to dissolve SO2 in sulfuric acid and feed that liquid to the anode, but this process results in significant diffusion resistance for the SO2. Alternatively, we have developed a process where SO2 is fed as a gas to the anode compartment and reacts with water crossing the membrane to produce sulfuric acid. There was concern that the …

Go to article

Effect Of Diphenyl Siloxane On The Catalytic Activity Of Pt On Carbon, Vijay A. Sethuraman, John W. Weidner, Lesia V V. Protsailo Jan 2007

Effect Of Diphenyl Siloxane On The Catalytic Activity Of Pt On Carbon, Vijay A. Sethuraman, John W. Weidner, Lesia V V. Protsailo

Faculty Publications

The effect of silicone on the catalytic activity of Pt for oxygen reduction and hydrogen adsorption was studied using diphenyl siloxane as a source compound at a rotating disk electrode (RDE). Diphenyl siloxane did not affect the catalytic activity of Pt when it was injected into the electrolyte. However, it blocked the oxygen reduction reaction when it was premixed with the catalyst. Proton transport was not blocked in either case. We postulate that diphenyl siloxane induces hydrophobicity and causes local water starvation, thereby blocking oxygen transport. Hence, the slow leaching of silicone seals in a fuel cell could cause silicon …

Go to article

Low-Temperature Synthesis Of A Ptru/Nb0.1ti0.9o2 Electrocatalyst For Methanol Oxidation, Brenda L. García, Roderick Fuentes, John W. Weidner Jan 2007

Low-Temperature Synthesis Of A Ptru/Nb0.1ti0.9o2 Electrocatalyst For Methanol Oxidation, Brenda L. García, Roderick Fuentes, John W. Weidner

Faculty Publications

Niobium was doped into anatase TiO2 support at 10 mol % (Nb0.1Ti0.9O2) using sol-gel chemistry. A PtRu/Nb0.1Ti0.9O2 catalyst was synthesized by LiBH4 reduction in tetrahydrofuran. The methanol electro-oxidation activity of the catalyst shows that this oxide support was electrically conductive. The current (A/gPt) was 6% higher on the PtRu/Nb0.1Ti0.9O2 catalyst compared to a commercial PtRu/C catalyst at 25°C. The electrochemically active surface area of the PtRu/C was 94% higher than PtRu/Nb0.1Ti0.9O2, thus the current per active site was 100% higher on PtRu/Nb0.1Ti0.9O2. A membrane electrode assembly with PtRu/Nb0.1Ti0.9O2 had 46% higher current (A/gPt) than an equivalent E-TEK membrane electrode assembly …

Go to article

Exafs Characterization Of Dendrimer-Derived Pt/Γ-Al2o3, A. Siani, O. S. Alexeev, C. T. Williams, Harry J. Ploehn, M. D. Amiridis Jan 2007

Exafs Characterization Of Dendrimer-Derived Pt/Γ-Al2o3, A. Siani, O. S. Alexeev, C. T. Williams, Harry J. Ploehn, M. D. Amiridis

Faculty Publications

The various steps involved in the preparation of a Pt/-Al2O3 material using hydroxyl-terminated generation four (G4OH) PAMAM dendrimers as templates were monitored by EXAFS. The results indicate that Cl ligands in the Pt precursors (H2PtCl6 and K2PtCl4) were partially replaced by aquo ligands upon hydrolysis to form [PtCl3(H2O)3]+ and [PtCl2(H2O)2] species. After interaction of such species with G4OH, Cl ligands from the first coordination shell of Pt were further replaced by nitrogen atoms from the dendrimer interior, …

Go to article

Using Computational Fluid Dynamics Modeling To Improve The Performance Of A Solar Co2 Converter, Thomas H. Fletcher, Ralph J. Price, Reed J. Jensen Jan 2007

Using Computational Fluid Dynamics Modeling To Improve The Performance Of A Solar Co2 Converter, Thomas H. Fletcher, Ralph J. Price, Reed J. Jensen

Faculty Publications

A solar collector to convert CO2 to CO at high temperature was previously developed, achieving a product with 4-6 mol % CO from pure CO2. Modeling results showed that reactions occurred in the thermal boundary layer of the heated zirconia rod at temperatures greater than 2300 K. This paper describes results of computer modeling of advanced designs meant to increase the conversion of CO from CO2. Several design modifications were tested using the model, including changing the cool-down region configuration, increasing the zirconia rod diameter, and changing the zirconia rod shape. Several operational adjustments were also modeled, including reducing the …

Go to article

Model Compound Study Of The Pathways For Aromatic Hydrocarbon Formation In Soot, Randall E. Winans, Nancy A. Tomczyk, Jerry E. Hunt, Mark S. Solum, Ronald J. Pugmire, Thomas H. Fletcher Jan 2007

Model Compound Study Of The Pathways For Aromatic Hydrocarbon Formation In Soot, Randall E. Winans, Nancy A. Tomczyk, Jerry E. Hunt, Mark S. Solum, Ronald J. Pugmire, Thomas H. Fletcher

Faculty Publications

As a follow-up of previous work on the flame pyrolysis of biphenyl and pyrene, a more detailed analysis of the pyrolytic products has been done using additional NMR data obtained on the whole soot sample correlated with detailed high-resolution and GC mass spectrometry data on the solvent-extracted portion of the same samples. These latter data complement the earlier NMR data with details of the pre-sooting structures, referred to as “young soot”, in pyrolyzed biphenyl samples collected at 1365, 1410, and 1470 K and pyrene at 1410 and 1470 K. The data reveal the roles played by free-radical-assisted polymerization reactions as …

Go to article

First Prev Next Last