Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Electronic Theses and Dissertations

Discipline
Institution
Keyword
Publication Year

Articles 2191 - 2220 of 4180

Full-Text Articles in Engineering

A Framework For Assessing The Quality And Effectiveness Of A National Employment System: A Case Study Of Saudi Arabia, Hemaid Alsulami Jan 2014

A Framework For Assessing The Quality And Effectiveness Of A National Employment System: A Case Study Of Saudi Arabia, Hemaid Alsulami

Electronic Theses and Dissertations

National employment systems have been established in several countries to tackle the unemployment dilemma between citizens while the labor market flooded by expatriates. Lack of performance measurement indices among these systems caused failure to provide jobs to citizens and caused a state of confusion and dissatisfaction among employing entities. In Saudi Arabia, unemployment rate has increased in the last few decades and have since become a very political issue for the Saudi government. Compared to other countries, the problem is different since many expatriates in Saudi Arabia are already employed in their markets while citizens are seeking jobs. In Saudi …


Investigation Of Dual-Stage High Efficiency And Density Micro Inverter For Solar Application, Lin Chen Jan 2014

Investigation Of Dual-Stage High Efficiency And Density Micro Inverter For Solar Application, Lin Chen

Electronic Theses and Dissertations

Module integrated converters (MIC), also called micro inverter, in single phase have witnessed recent market success due to unique features (1) improved energy harvest, (2) improved system efficiency, (3) lower installation costs, (4) plug-N-play operation, (5) and enhanced flexibility and modularity. The MIC sector has grown from a niche market to mainstream, especially in the United States. Due to the fact that two-stage architecture is commonly used for single phase MIC application. A DC-DC stage with maximum power point tracking to boost the output voltage of the Photovoltaic (PV) panel is employed in the first stage, DC-AC stage is used …


Optimization Of Block Layout And Evaluation Of Collection Mat Materials For Polyacrylamide Treatment Channels, Alicia Mcdougal Jan 2014

Optimization Of Block Layout And Evaluation Of Collection Mat Materials For Polyacrylamide Treatment Channels, Alicia Mcdougal

Electronic Theses and Dissertations

Construction sites are frequently cited as major sources of pollution that degrade the quality of surface water. The highly erodible topsoil is transported off site by stormwater runoff causing negative effects downstream. Research has shown that the small particles, which are the most susceptible to erosive forces, have more pollutants associated with them than larger soil particles. Currently, in the state of Florida, it is not permissible to discharge water to a receiving water body if the turbidity is more than 29 Nephelometric Turbidity Units (NTUs) above background or higher than background for an outstanding Florida water body. The removal …


Mechanical And Thermal Characterization Of Continuous Fiber-Reinforced Pyrolysis-Derived Carbon-Matrix Composites, Donovan Lui Jan 2014

Mechanical And Thermal Characterization Of Continuous Fiber-Reinforced Pyrolysis-Derived Carbon-Matrix Composites, Donovan Lui

Electronic Theses and Dissertations

Maturity of high-temperature polymer-reinforced composites defer to conventionally expensive and intensive methods in both material and manufacturing aspects. Even traditional carbon-carbon, aerogel, and ceramic approaches are highly limited by difficult manufacturing techniques and are subject to sensitive handling throughout their processing and lifetime. Despite their utility in extreme environments, the high costs of existing high-temperature composites find limited practical applicability under high-performance applications. The development of continuous fiber-reinforced pyrolysis-derived carbon-matrix composites aim to circumvent the issues surrounding the manufacturing and handling of conventional high-temperature composites. Polymer matrix composites (PMCs) have a number of attractive properties including light weight, high stiffness-to-weight …


Injection-Locked Vertical Cavity Surface Emitting Lasers (Vcsels) For Optical Arbitrary Waveform Generation, Sharad Bhooplapur Jan 2014

Injection-Locked Vertical Cavity Surface Emitting Lasers (Vcsels) For Optical Arbitrary Waveform Generation, Sharad Bhooplapur

Electronic Theses and Dissertations

Complex optical pulse shapes are typically generated from ultrashort laser pulses by manipulating the optical spectrum of the input pulses. This generates complex but periodic time-domain waveforms. Optical Arbitrary Waveform Generation (OAWG) builds on the techniques of ultrashort pulse-shaping, with the goal of making non-periodic, truly arbitrary optical waveforms. Some applications of OAWG are coherently controlling chemical reactions on a femtosecond time scale, improving the performance of LADAR systems, high-capacity optical telecommunications and ultra wideband signals processing. In this work, an array of Vertical Cavity Surface Emitting Lasers (VCSELs) are used as modulators, by injection-locking each VCSEL to an individual …


An Uncooled Mid-Wave Infrared Detector Based On Optical Response Of Laser-Doped Silicon Carbide., Geunsik Lim Jan 2014

An Uncooled Mid-Wave Infrared Detector Based On Optical Response Of Laser-Doped Silicon Carbide., Geunsik Lim

Electronic Theses and Dissertations

This dissertation focuses on an uncooled Mid-Wave Infra-Red (MWIR) detector was developed by doping an n-type 4H-SiC with Ga using the laser doping technique. 4H-SiC is one of the polytypes of crystalline silicon carbide, a wide bandgap semiconductor. The dopant creates an energy level of 0.30 eV, which was confirmed by optical spectroscopy of the doped sample. This energy level corresponds to the MWIR wavelength of 4.21 µm. The detection mechanism is based on the photoexcitation of electrons by the photons of this wavelength absorbed in the semiconductor. This process modifies the electron density, which changes the refraction index and, …


Study Of The Formation And Control Of Disinfection By-Products Originating From A Surface Water Supply On The Volcanic Island Of Guam, Erica Laberge Jan 2014

Study Of The Formation And Control Of Disinfection By-Products Originating From A Surface Water Supply On The Volcanic Island Of Guam, Erica Laberge

Electronic Theses and Dissertations

Three oxidants have been evaluated for use as alternative chemical pretreatments for Fena Lake, a surface water that supplies the U.S. Navy's Public Water System (PWS) on the volcanic island of Guam. The study consisted of two investigative components. The first and primary component included a bench-scale evaluation to study the effects of different pre-oxidant chemicals on the formation of chlorinated disinfection by-products (DBPs). The second and ancillary component included a series of water treatment and distribution system management studies that analyzed DBP formation within the treatment plant and water distribution system. The goal of this research was to reduce …


Pen-Based Methods For Recognition And Animation Of Handwritten Physics Solutions, Salman Cheema Jan 2014

Pen-Based Methods For Recognition And Animation Of Handwritten Physics Solutions, Salman Cheema

Electronic Theses and Dissertations

There has been considerable interest in constructing pen-based intelligent tutoring systems due to the natural interaction metaphor and low cognitive load afforded by pen-based interaction. We believe that pen-based intelligent tutoring systems can be further enhanced by integrating animation techniques. In this work, we explore methods for recognizing and animating sketched physics diagrams. Our methodologies enable an Intelligent Tutoring System (ITS) to understand the scenario and requirements posed by a given problem statement and to couple this knowledge with a computational model of the student's handwritten solution. These pieces of information are used to construct meaningful animations and feedback mechanisms …


An Unsupervised Consensus Control Chart Pattern Recognition Framework, Siavash Haghtalab Jan 2014

An Unsupervised Consensus Control Chart Pattern Recognition Framework, Siavash Haghtalab

Electronic Theses and Dissertations

Early identification and detection of abnormal time series patterns is vital for a number of manufacturing. Slide shifts and alterations of time series patterns might be indicative of some anomaly in the production process, such as machinery malfunction. Usually due to the continuous flow of data monitoring of manufacturing processes requires automated Control Chart Pattern Recognition(CCPR) algorithms. The majority of CCPR literature consists of supervised classification algorithms. Less studies consider unsupervised versions of the problem. Despite the profound advantage of unsupervised methodology for less manual data labeling their use is limited due to the fact that their performance is not …


Automatic Detection Of Brain Functional Disorder Using Imaging Data, Soumyabrata Dey Jan 2014

Automatic Detection Of Brain Functional Disorder Using Imaging Data, Soumyabrata Dey

Electronic Theses and Dissertations

Recently, Attention Deficit Hyperactive Disorder (ADHD) is getting a lot of attention mainly for two reasons. First, it is one of the most commonly found childhood behavioral disorders. Around 5-10% of the children all over the world are diagnosed with ADHD. Second, the root cause of the problem is still unknown and therefore no biological measure exists to diagnose ADHD. Instead, doctors need to diagnose it based on the clinical symptoms, such as inattention, impulsivity and hyperactivity, which are all subjective. Functional Magnetic Resonance Imaging (fMRI) data has become a popular tool to understand the functioning of the brain such …


Large Area Conformal Infrared Frequency Selective Surfaces, Jeffrey D'Archangel Jan 2014

Large Area Conformal Infrared Frequency Selective Surfaces, Jeffrey D'Archangel

Electronic Theses and Dissertations

Frequency selective surfaces (FSS) were originally developed for electromagnetic filtering applications at microwave frequencies. Electron-beam lithography has enabled the extension of FSS to infrared frequencies; however, these techniques create sample sizes that are seldom appropriate for real world applications due to the size and rigidity of the substrate. A new method of fabricating large area conformal infrared FSS is introduced, which involves releasing miniature FSS arrays from a substrate for implementation in a coating. A selective etching process is proposed and executed to create FSS particles from crossed-dipole and square-loop FSS arrays. When the fill-factor of the particles in the …


Assessment Of Corn Stover Torrefaction For On-Farm Biochar Production, Christina M. Gerometta Jan 2014

Assessment Of Corn Stover Torrefaction For On-Farm Biochar Production, Christina M. Gerometta

Electronic Theses and Dissertations

Torrefaction is a thermochemical pretreatment process that is typically achieved by slowly heating biomass (<50°C/min) within the temperature range of 200 – 300°C under an inert atmosphere. This process yields a storable solid product with enhanced fuel characteristics that are influenced by the ligno-cellulosic composition of the original feedstock and the imposed torrefaction conditions (time and temperature). This study is an assessment of corn stover properties that are relevant for designing an on-farm torrefaction system. The first portion of this study compared the thermal decomposition behaviors of corn stover fractions (leaf, stalk, cob) to the respective ligno-cellulosic composition using thermo-gravimetric analysis. It was found that the thermal decomposition pattern correlates to the structure and ratio of ligno-cellulosic polymers and provides design guidelines for an on-farm torrefaction system capable of handling large quantities of mixed fraction stover. The second part of this study investigated the effects of torrefaction time and temperature on the mass and energy yield of mixed fraction corn stover using a 46.3 L batch style reactor. It was found that longer reaction times and higher temperatures were required to obtain mass and energy yields similar to those found using lab-scale reactors and finely milled samples. Non-uniform torrefaction occurred between fractions due to chemical composition of each fraction and proximity to the heating elements.


Using Acoustic Emission Monitoring For Energy-Based Fatigue Life Prediction, Sepehr Nesaei Jan 2014

Using Acoustic Emission Monitoring For Energy-Based Fatigue Life Prediction, Sepehr Nesaei

Electronic Theses and Dissertations

The study of fatigue and fracture mechanics is crucial to the health monitoring and overall safety of aerospace and civil structures. The materials used to manufacture these industry parts have inherent anomalies that eventually grow under cyclic loadings during regular operation. The ASTM and/or military testing guidelines used to analyze and qualify structures and materials for use are costly and time consuming. Therefore, any additional methods or knowledge that can be used to reduce the number of tests will be useful to the industry to avoid unnecessary costs. Acoustic emission (AE) monitoring is currently used in many applications to assess …


Rss Based Localization In A Rayleigh Fading Environment, Rojina Adhikary Jan 2014

Rss Based Localization In A Rayleigh Fading Environment, Rojina Adhikary

Electronic Theses and Dissertations

The objective of this thesis is to quantify the improvement that can be obtained in sensor agent localization accuracy as a function of the number of multipath components that can be resolved. We assume that a known number sensor agents are located at unknown coordinates within a rectangular grid having anchors at the corner locations, whose locations are known. Further, we assume fading is Rayleigh and that the propagation constant is constant but unknown. Also, we assume that modulation is spread spectrum and that either the sensors or agents are capable of resolving multipath components down to the chip level …


Adaptive Relay-Selection In Decode-And-Forward Cooperative Systems, Adham Ahmed Hagag Jan 2014

Adaptive Relay-Selection In Decode-And-Forward Cooperative Systems, Adham Ahmed Hagag

Electronic Theses and Dissertations

In the past few years adaptive decode-and-forward cooperative diversity systems have been studied intensively in literature. Many schemes and protocols have been proposed to enhance the performance of the cooperative systems while trying to alleviate its drawbacks. One of the recent schemes that had been shown to give high improvements in performance is the best-relay selection scheme. In the best-relay selection scheme only one relaying nodes among the relays available in the system is selected to forward the source's message to the destination. The best relay is selected as the relay node that can achieve the highest end-to-end signal-to-noise ratio …


Reconfigurable Microstrip Antennas With Tunable Radiation Pattern Characteristics, Ahmed Khidre Jan 2014

Reconfigurable Microstrip Antennas With Tunable Radiation Pattern Characteristics, Ahmed Khidre

Electronic Theses and Dissertations

Reconfigurable beam antenna systems are capable of changing their radiation characteristics in real time, such as beam direction, beam shape, beamwidth, etc. Such antenna system is desired for various wireless applications because of many reasons among them; it helps to enhance signal strength received from an intended target, mitigates interference, and accommodates sudden changes in traffic demand of wireless networks. It might also help to reduce the deployment cost of wireless networks infrastructures. In this dissertation, designs for reconfigurable beam microstrip antennas with tunable radiation characteristics have been proposed. The method to achieve these designs is the reconfigurable parasitic element …


Modeling The H2s Concentrations Affected By Shelterbelts Downwind From A Swine Facility, Brett D. Pettigrew Jan 2014

Modeling The H2s Concentrations Affected By Shelterbelts Downwind From A Swine Facility, Brett D. Pettigrew

Electronic Theses and Dissertations

Odor from swine facilities can be a nuisance to the nearby residences and communities. Shelterbelts have been shown to positively impact the downwind air quality, but the impacts are dependent on wind speed and direction, and shelterbelt configuration. The first objective of this research was to develop an empirical model of shelterbelt-induced hydrogen sulfide (H2S) concentration reductions as a function of horizontal distance beyond a swine facility, based on data from a previous study by Hofer (2009). The Hofer (2009) study measured H2S concentrations at a swine facility at four discrete distances beyond the barn (55, 246, 510, and 805 …


Cross-Layer Capacity Optimization In Ofdma Systems: Wimax And Lte, Bimal Paudel Jan 2014

Cross-Layer Capacity Optimization In Ofdma Systems: Wimax And Lte, Bimal Paudel

Electronic Theses and Dissertations

Given the broad range of applications supported, high data rate required and low latency promised; dynamic radio resource management is becoming vital for newly emerging air interface technologies such as wireless interoperability for microwave access (Wimax) and long term evolution (lte) adopted by international standards. This thesis considers orthogonal frequency division multiple access (ofdma) system, which has been implemented in both Wimax and lte technologies as their air interface multiple access mechanism. A framework for optimized resource allocation with quality of service (qos) support that aims to balance between service provider's revenue and subscriber's satisfaction is proposed. A cross-layer optimization …


Broadband Approaches And Beam-Scanning Techniques For Reflectarray Antenna, Yilin Mao Jan 2014

Broadband Approaches And Beam-Scanning Techniques For Reflectarray Antenna, Yilin Mao

Electronic Theses and Dissertations

Reflectarray antennas combine the numerous advantages of reflector antennas and phased array antennas and create a hybrid high-gain antenna with a low-profile, low-mass, easy-fabrication, and diversified radiation performance. However, it still has some inherent drawbacks, such as limited bandwidth and scanning range, which are targeted in this dissertation. At first, the array theory approach for radiation analysis of reflectarray antennas is described and implemented. Numerical results are then presented and compared with reference results to confirm its reliability. As the most critical influential factor to the reflectarray bandwidth, the element bandwidth was studied at first, and the effects of element …


Analysis And Design Of Low Profile Multiband Multifunctional Antenna Arrays, Walker F. Hunsicker Jan 2014

Analysis And Design Of Low Profile Multiband Multifunctional Antenna Arrays, Walker F. Hunsicker

Electronic Theses and Dissertations

Light-weight phased array antennas for aerospace and mobile applications require utilizing the same antenna aperture to provide multiple functions with dissimilar radiation pattern specifications (e.g., multiband operation for communications and tracking). Multi-functional antennas provide advantages over aggregate antenna clusters by reducing space requirements, and can aid in the optimal placement of all required apertures to provide adequate isolation between channels. Furthermore, the combination of antenna apertures into a comgeometry mitigates co-site installation issues by addressing interference within the integrated radiator design itself as opposed to the extensive analysis which is required to configure multiple radiators in close proximity. The combination …


Xqx Based Modeling For General Integer Programming Problems, Vijay P. Ramalingam Jan 2014

Xqx Based Modeling For General Integer Programming Problems, Vijay P. Ramalingam

Electronic Theses and Dissertations

We present a new way to model general integer programming (IP) problems with in- equality and equality constraints using XQX. We begin with the definition of IP problems folloby their practical applications, and then present the existing XQX based models to handle such problems. We then present our XQX model for general IP problems (including binary IP) with equality and inequality constraints, and also show how this model can be applied to problems with just inequality constraints. We then present the local optima based solution procedure for our XQX model. We also present new theorems and their proofs for our …


Pretreatment Of Cellulosic Biomass By Iron-Containing Magnetic Ionic Liquid Dissolution, Christopher Roth Riley Jan 2014

Pretreatment Of Cellulosic Biomass By Iron-Containing Magnetic Ionic Liquid Dissolution, Christopher Roth Riley

Electronic Theses and Dissertations

The focus of this project is to determine the effectiveness in the preprocessing of biomass when magnetic ionic liquids (MIL) (1-butyl-3-methylimidazolium tetrachloroferrate (Bmim[FeCl4]) and 1-ethyl-3-methylimidazolium tetrachloroferrate (Emim[FeCl4])) are used as a green solvent. Lignocellulose is a promising starting material for a plethora of products, ranging from biofuels to custom chemicals; however, lignocellulose is resistant to enzymatic degradation. Various biomass-preprocessing techniques such as microbial, mechanical, and chemical pretreatment are used for enhancing the digestibility of biomass to sugars for ethanol production. Varieties of ionic liquids have demonstrated the ability to fragment lignocellulose. However, after fragmentation, separation of biomass and ionic liquids …


Measurements Of Fluvial Sediments Using A Single-Frequency Acoustic Attenuation System, Thomas Alexander Kajdan Jan 2014

Measurements Of Fluvial Sediments Using A Single-Frequency Acoustic Attenuation System, Thomas Alexander Kajdan

Electronic Theses and Dissertations

Suspended sediments are a global-scale pollutant that threaten the integrity of our waterways and pose an environmental threat to many aquatic ecosystems. Innovative techniques are required to continuously monitor this pollutant. Ultrasonic acoustic measurements have the potential to improve the temporal resolution of fluvial sediment data. This work investigates the use of a prototype field grade single-frequency acoustic attenuation system that was developed at the National Center for Physical Acoustics (NCPA), located at the University of Mississippi. This field-deployable unit consists of two 20 MHz immersion transducers that are aligned in a "pitch-catch" configuration at a fixed distance of 18 …


Optimized Image Compressed Sensing And Transmission Through Wireless Channels, Saheed Olanigan Jan 2014

Optimized Image Compressed Sensing And Transmission Through Wireless Channels, Saheed Olanigan

Electronic Theses and Dissertations

This thesis examines the robust behavior of quantized compressed sensing measurements during transmission through an additive white gaussian noise wireless channel. The poor rate-distortion performance that accompanies compressed sensing after applying quantization has led to several works in quantized compressed sensing. However, most of these works have less consideration of the effect of transmission channel on the resulting bit stream of the quantized compressed sensing measurements. For an additive white gaussian noise wireless channel model, the quantizer and bit energy signal-to-noise ratio determines the degree of the channel effect. This thesis explores the effect of quantization and channel noise during …


Microstructure, Quasi-Static, And High-Strain Rate Dynamic Characterization Of Metakaolin And Fly Ash Based Geopolymers For Structural Applications, Damian Lee Stoddard Jan 2014

Microstructure, Quasi-Static, And High-Strain Rate Dynamic Characterization Of Metakaolin And Fly Ash Based Geopolymers For Structural Applications, Damian Lee Stoddard

Electronic Theses and Dissertations

Geopolymers are a class of rapid setting cementing systems that have been used as mortar or additives in concrete mixes to improve properties. Several types of geopolymer systems such as metakaolin and fly ash based geopolymers are widely used, and are available in different mixture proportions [1, 2]. Metakaolin (Al2Si2O7), a dehydroxylated form of Kaolinite (Al2Si2O5(OH)4) clay readily available from many sources, provides several benefits whenadded to a concrete mix design or used as a mortar system, including durability, freeze/thaw, acid resistance, and high temperature resistance [3]. Class F fly ash-based mortar geopolymers provide added fire retardation, reduces crack formation, …


Bio-Inspired Attitude Control Of Micro Air Vehicles Using Rich Information From Airflow Sensors, He Shen Jan 2014

Bio-Inspired Attitude Control Of Micro Air Vehicles Using Rich Information From Airflow Sensors, He Shen

Electronic Theses and Dissertations

Biological phenomena found in nature can be learned and customized to obtain innovative engineering solutions. In recent years, biologists found that birds and bats use their mechanoreceptors to sense the airflow information and use this information directly to achieve their agile flight performance. Inspired by this phenomenon, an attitude control system for micro air vehicles using rich amount of airflow sensor information is proposed, designed and tested. The dissertation discusses our research findings on this topic. First, we quantified the errors between the calculated and measured lift and moment profiles using a limited number of micro pressure sensors over a …


Self-Heating Control Of Edge Emitting And Vertical Cavity Surface Emitting Lasers, Yu Zhang Jan 2014

Self-Heating Control Of Edge Emitting And Vertical Cavity Surface Emitting Lasers, Yu Zhang

Electronic Theses and Dissertations

Self-heating leads to temperature rise of laser diode and limits the output power, efficiency and modulation bandwidth due to increased loss and decreased differential gain. The main heat sources in laser diode during continuous wave operation are Joule heating and free carrier absorption loss. To control device self-heating, the epi structure needs to be designed with low electrical resistance and low absorption loss, while the heat flux must spread out of the device efficiently. This dissertation presents the control of self-heating of both edge emitting laser diodes and vertical cavity surface emitting lasers (VCSELs). For the 980nm high power edge …


Particle Manipulation Via Optical Forces And Engineering Soft-Matter Systems With Tunable Nonlinearities., Shima Fardad Jan 2014

Particle Manipulation Via Optical Forces And Engineering Soft-Matter Systems With Tunable Nonlinearities., Shima Fardad

Electronic Theses and Dissertations

One of the most intriguing properties of light-matter interaction is the ability of an electromagnetic field to exert mechanical forces on polarizable objects. This phenomenon is a direct consequence of the fact that light carries momentum, which in turn can be transferred to matter. Mediated by scattering, this interaction usually manifests itself as a “pushing force” in the direction of beam propagation. However, it is possible to judiciously engineer these optical forces, either by tailoring particle polarizability, and/or by structuring the incident light field. As a simple example, a tightly focused laser beam demonstrates strong gradient forces, which may attract …


Frequency Selective Detection Of Infrared Radiation In Uncooled Optical Nano-Antenna Array, Sushrut Modak Jan 2014

Frequency Selective Detection Of Infrared Radiation In Uncooled Optical Nano-Antenna Array, Sushrut Modak

Electronic Theses and Dissertations

Mid-infrared (mid-IR) detection and imaging over atmospheric transparent 3-5 μm and 8-12 μm bands are increasingly becoming important for various space, defense and civilian applications. Various kinds of microbolometers offer uncooled detection of IR radiation. However, broadband absorption of microbolometers makes them less sensitive to spectrally resolved detection of infrared radiation and the fabrication is also very tedious involving multiple complex lithography steps. In this study, we designed an optical nano-antenna array based detector with narrow frequency band of operation. The structure consists of a two-element antenna array comprised of a perforated metallic hole array coupled with an underneath disk …


Control Based Soft Switching Three-Phase Micro-Inverter: Efficiency And Power Density Optimization, Ahmadreza Amirahmadi Jan 2014

Control Based Soft Switching Three-Phase Micro-Inverter: Efficiency And Power Density Optimization, Ahmadreza Amirahmadi

Electronic Theses and Dissertations

In the field of renewable energy, solar photovoltaic is growing exponentially. Grid-tied PV micro-inverters have become the trend for future PV system development because of their remarkable advantages such as enhanced energy production due to MPPT implementation for each PV panel, high reliability due to redundant and distributed system architecture, and simple design, installation, and management due to its plug-and-play feature. Conventional approaches for the PV micro-inverters are mainly in the form of single-phase grid connected and they aim at the residential and commercial rooftop applications. It would be advantageous to extend the micro-inverter concept to large size PV installations …