Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Electrical and Computer Engineering Faculty Research & Creative Works

Discipline
Keyword
Publication Year

Articles 2431 - 2460 of 3518

Full-Text Articles in Engineering

Advanced Detection And Coding Techniques For Nonlinear Intersymbol Interference Cancellation In 40 Gb/S Systems, B. Vasic, I. B. Djordjevic, Vittal S. Rao Jan 2006

Advanced Detection And Coding Techniques For Nonlinear Intersymbol Interference Cancellation In 40 Gb/S Systems, B. Vasic, I. B. Djordjevic, Vittal S. Rao

Electrical and Computer Engineering Faculty Research & Creative Works

No abstract provided.

Go to article

Modeling Of Dielectric Mixtures Containing Conducting Inclusions With Statistically Distributed Aspect Ratio, Marina Koledintseva, Sandeep K. R. Chandra, Richard E. Dubroff, Robert W. Schwartz Jan 2006

Modeling Of Dielectric Mixtures Containing Conducting Inclusions With Statistically Distributed Aspect Ratio, Marina Koledintseva, Sandeep K. R. Chandra, Richard E. Dubroff, Robert W. Schwartz

Electrical and Computer Engineering Faculty Research & Creative Works

An analytical model of composites made of a dielectric base and randomly oriented metal inclusions in the form of nanorods is presented. This model is based on the generalized Maxwell Garnett (MG) mixing rule. In this model, the nanorod particles are modeled as prolate spheroids with a statistically normal distribution of their aspect ratios. It is shown that parameters of the distribution laws affect the frequency characteristics of the composites both at microwave and optical frequencies. The results of computations are represented.

Go to article

An Investigation Of The Effect Of Chassis Connections On Radiated Emi From Pcbs, N. Kobayashi, T. Harada, A. Shaik, Todd H. Hubing Jan 2006

An Investigation Of The Effect Of Chassis Connections On Radiated Emi From Pcbs, N. Kobayashi, T. Harada, A. Shaik, Todd H. Hubing

Electrical and Computer Engineering Faculty Research & Creative Works

This paper investigates the effect of grounding posts when printed circuit boards are mounted near and parallel to a metal plate or chassis. Specifically, experimental data showing changes in radiated emission levels are explained by means of coupling phenomena between a power bus, a chassis cavity including grounding posts, and a cable connected to the power bus. This coupling is modeled using SPICE and the results are combined with an equivalent magnetic current source model to estimate the radiated emissions from various printed circuit board configurations. the calculated results are shown to be consistent with the corresponding experimental data. © …

Go to article

Emc Expert Systems For Evaluating Automotive Designs, Todd H. Hubing Jan 2006

Emc Expert Systems For Evaluating Automotive Designs, Todd H. Hubing

Electrical and Computer Engineering Faculty Research & Creative Works

The automobiles of the future are being designed on computers and a significant amount of performance and safety testing is done using computer models. by the time the first hardware prototype is built, many critical design decisions affecting intersystem and intra-system electromagnetic compatibility (EMC) have been made. Therefore, it is becoming increasingly important to perform the first EMC design review well before any hardware is available to test. Automotive EMC expert systems examine the relevant aspects of an automotive design while it is still on the computer to spot design features that are likely to cause EMC problems. © 2006 …

Go to article

Message From The Pdm Workshop Chair, Ishfaq Ahmad, Shoukat Ali, Suchi Bhandharkar, Hesham El-Rewini, Kamal Karlapalem, Ashraf Kassim, Ashfaq Khokhar, Yu Kwong Kwok, Jack Lee, Qing Li, John Lui, Yu Su, R. Vaidyanathan, Bharadwaj Veeravalli Jan 2006

Message From The Pdm Workshop Chair, Ishfaq Ahmad, Shoukat Ali, Suchi Bhandharkar, Hesham El-Rewini, Kamal Karlapalem, Ashraf Kassim, Ashfaq Khokhar, Yu Kwong Kwok, Jack Lee, Qing Li, John Lui, Yu Su, R. Vaidyanathan, Bharadwaj Veeravalli

Electrical and Computer Engineering Faculty Research & Creative Works

No abstract provided.

Go to article

Reliability Measurement Of Mass Storage System For Onboard Instrumentation, Minsu Choi, Nohpill Park, Vincenzo Piuri, Fabrizio Lombardi Dec 2005

Reliability Measurement Of Mass Storage System For Onboard Instrumentation, Minsu Choi, Nohpill Park, Vincenzo Piuri, Fabrizio Lombardi

Electrical and Computer Engineering Faculty Research & Creative Works

Advances in spaceborne vehicular technology have made possible the long-life duration of the mission in harsh cosmic environments. Reliability and data integrity are the commonly emphasized requirements of spaceborne solid-state mass storage systems, because faults due to the harsh cosmic environments, such as extreme radiation, can be experienced throughout the mission. Acceptable dependability for these instruments has been achieved by using redundancy and repair. Reconfiguration (repair) of memory arrays using spare memory lines is the most common technique for reliability enhancement of memories with faults. Faulty cells in memory arrays are known to show spatial locality. This physical phenomenon is …

Go to article

Crosstalk Analysis By Fast Computational Algorithms, Z. G. Qian, J. Xiong, L. Sun, I. T. Chiang, W. C. Chew, L. (Lijun) J. Jiang, Y. H. Chu Dec 2005

Crosstalk Analysis By Fast Computational Algorithms, Z. G. Qian, J. Xiong, L. Sun, I. T. Chiang, W. C. Chew, L. (Lijun) J. Jiang, Y. H. Chu

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, we will present the use of low frequency fast algorithms for crosstalk analysis. Some criss-cross line structures are studied and time domain signals are demonstrated to ascertain crosstalk effect. ©2005 IEEE.

Go to article

A Mixed-Form Fast Multipole Algorithm, Li (Lijun) Jun Jiang, Weng Cho Chew Dec 2005

A Mixed-Form Fast Multipole Algorithm, Li (Lijun) Jun Jiang, Weng Cho Chew

Electrical and Computer Engineering Faculty Research & Creative Works

The fast multipole algorithm manifests in two very different forms at low frequencies and at mid frequencies. Each can operate in their respective regimes, but are not tenable in the other regimes. The paper reports on a way to factorize the Green's function for fast algorithm using a mixed form. The low-frequency fast multipole algorithm (LF-FMA) will be used at low frequencies or the long-wavelength regime, and the multilevel fast multipole algorithm (MLFMA) will be used for the mid frequencies or the shorter-wavelength regime. For object modeling where both long-wavelength and wave physics are important, we propose a mixed-form fast …

Go to article

The General Variational Formulas For Capacitance Parameter Extraction, W. C. Chew, L. (Lijun) J. Jiang Dec 2005

The General Variational Formulas For Capacitance Parameter Extraction, W. C. Chew, L. (Lijun) J. Jiang

Electrical and Computer Engineering Faculty Research & Creative Works

To obtain second order accuracy using the first order data for the capacitance parameter extraction, a set of new generalized variational formulas are presented in this paper. They are complete since they are valid not only for self-capacitances, but also for mutual capacitances. A more general variational formula is derived to account for the asymmetrical elastance matrix case. By these novel formulas the computational accuracy can be significantly improved compared to the conventional direct capacitance extraction method. © 2005 IEEE.

Go to article

A Novel Method For Determination Of Dielectric Properties Of Materials Using A Combined Embedded Modulated Scattering And Near-Field Microwave Techniques-Part I: Forward Model, Dana M. Hughes, R. Zoughi Dec 2005

A Novel Method For Determination Of Dielectric Properties Of Materials Using A Combined Embedded Modulated Scattering And Near-Field Microwave Techniques-Part I: Forward Model, Dana M. Hughes, R. Zoughi

Electrical and Computer Engineering Faculty Research & Creative Works

The use of combined embedded modulated scattering technique and near-field microwave nondestructive testing techniques is investigated as a novel method for evaluating the dielectric properties of a material. The forward formulation for determining the reflection coefficient at the aperture of a waveguide radiating into a dielectric half-space in which a PIN diode-loaded dipole (i.e., modulated scattering technique probe) is embedded is presented. This formulation is based upon calculating the near-field coupling between the waveguide and the dipole as a mutual impedance.

Go to article

A Novel Method For Determination Of Dielectric Properties Of Materials Using A Combined Embedded Modulated Scattering And Near-Field Microwave Techniques-Part Ii: Dielectric Property Recalculation, R. Zoughi, Dana Hughes Dec 2005

A Novel Method For Determination Of Dielectric Properties Of Materials Using A Combined Embedded Modulated Scattering And Near-Field Microwave Techniques-Part Ii: Dielectric Property Recalculation, R. Zoughi, Dana Hughes

Electrical and Computer Engineering Faculty Research & Creative Works

The use of combined embedded modulated scattering technique and near-field microwave nondestructive testing techniques is investigated as a novel method for evaluating the dielectric properties of a material. The forward formulation for determining the reflection coefficient at the aperture of a waveguide radiating into a dielectric half-space in which a PIN diode-loaded dipole (i.e., modulated scattering technique probe) is embedded was presented in Part I of this paper. Here, in Part II, the recalculation of the dielectric properties, using the results of the forward model, is presented along with some associated experimental results.

Go to article

Modeling Of Capacitor Impedance In Switching Converters, Jonathan W. Kimball, Philip T. Krein, Kevin R. Cahill Dec 2005

Modeling Of Capacitor Impedance In Switching Converters, Jonathan W. Kimball, Philip T. Krein, Kevin R. Cahill

Electrical and Computer Engineering Faculty Research & Creative Works

Switched capacitor (SC) converters are gaining acceptance as alternatives to traditional, inductor-based switching power converters. Proper design of SC converters requires an understanding of all loss sources and their impacts on circuit operation. In the present work, an equivalent resistance method is developed for analysis, and equivalent resistance formulae are presented for various modes of operation. Quasiresonant converters are explored and compared to standard SC converters. Comparisons to inductor-based switching power converters are made. A number of capacitor technologies are evaluated and compared for applications to both SC converters and inductor-based converters. The resulting model can be used to accurately …

Go to article

Conducting Business In Network Centric Collaborative Environments, Vance Saunders, Paul Bailor, Charles Cohen, Ann K. Miller, Barbra Sorensen Dec 2005

Conducting Business In Network Centric Collaborative Environments, Vance Saunders, Paul Bailor, Charles Cohen, Ann K. Miller, Barbra Sorensen

Electrical and Computer Engineering Faculty Research & Creative Works

The development of the World Wide Web (or Internet) has provided the ability to connect the entire world together. Thousands of web servers located around the world allow users to connect and communicate with one another. Additionally, a huge transaction-based product sales business has evolved, via the Internet. for many, the next generation of the Internet needs to focus on collections of servers and users working collectively together to solve problems. Grids and the Global Information Grid (GIG) are terms associated with enabling technologies that provide the framework for collections of servers and users to work together. Network Centric Operations …

Go to article

Solving Low Frequency Electromagnetic Problems With Fast Solvers, W. C. Chew, L. (Lijun) J. Jiang, Y. H. Chu, Y. A. Liu, M. K. Li, Z. G. Qian, J. Xiong, L. Sun Dec 2005

Solving Low Frequency Electromagnetic Problems With Fast Solvers, W. C. Chew, L. (Lijun) J. Jiang, Y. H. Chu, Y. A. Liu, M. K. Li, Z. G. Qian, J. Xiong, L. Sun

Electrical and Computer Engineering Faculty Research & Creative Works

No abstract provided.

Go to article

The Mixed-Form Fast Multipole Algorithm For Broadband Electromagnetic Simulations, L. (Lijun) J. Jiang, W. C. Chew Dec 2005

The Mixed-Form Fast Multipole Algorithm For Broadband Electromagnetic Simulations, L. (Lijun) J. Jiang, W. C. Chew

Electrical and Computer Engineering Faculty Research & Creative Works

No abstract provided.

Go to article

An Analog Vlsi Implementation Of A Multi-Scale Spike Detection Algorithm For Extracellular Neural Recordings, Christy L. Rogers, John G. Harris, Jose C. Principe, Justin C. Sanchez Dec 2005

An Analog Vlsi Implementation Of A Multi-Scale Spike Detection Algorithm For Extracellular Neural Recordings, Christy L. Rogers, John G. Harris, Jose C. Principe, Justin C. Sanchez

Electrical and Computer Engineering Faculty Research & Creative Works

This paper discusses a multi-scale neural spike detection algorithm for a low-power analog circuit implementation. The key idea is to implement wavelet decomposition and improve spike detection by independently controlling thresholds for each scale. Each thresholder scale is then combined to provide a single output indicating a spike occurrence. This spike detection algorithm shows promising results towards a robust, compact, and unsupervised low power analog spike detection circuit. A low power front-end spike detection circuit can be added to a neural amplifier and dramatically reduce the required data bandwidth for BMI applications. © 2005 IEEE.

Go to article

A Grasp For Unitary Space-Time Codes, Adam Panagos, Kurt Louis Kosbar Nov 2005

A Grasp For Unitary Space-Time Codes, Adam Panagos, Kurt Louis Kosbar

Electrical and Computer Engineering Faculty Research & Creative Works

Unitary space-time codes perform well at high signal-to-noise ratios on MIMO channels even when the propagation coefficients between transmitter and receiver are unknown. One method of constructing unitary space-time constellations uses a random search to find signal constellations that minimize the maximum pairwise correlation between transmitted signals. The work presented here uses a greedy randomized adaptive search procedure (GRASP) for finding good unitary space-time code constellations. Simulation results show that, on average, this technique finds codes with better correlation properties than the random search method. This new search procedure was also used to find signal constellations with better correlation properties …

Go to article

Evaluation Of Microwave Reflection Properties Of Cyclically Soaked Mortar Based On A Semiempirical Electromagnetic Model, Shanup Peer, K. E. Kurtis, R. Zoughi Oct 2005

Evaluation Of Microwave Reflection Properties Of Cyclically Soaked Mortar Based On A Semiempirical Electromagnetic Model, Shanup Peer, K. E. Kurtis, R. Zoughi

Electrical and Computer Engineering Faculty Research & Creative Works

Detection of chloride ingress and evaluation of its distribution and temporal movement in reinforced concrete structures is an important practical issue. Steel reinforcing bars embedded in good quality concrete are normally protected from corrosion. However, the presence of a sufficient concentration of free chloride ions in the region of the reinforcing steel can initiate the process of corrosion. Therefore, it is important to be able to detect ingress of chloride ions and their distribution in cement-based materials. Moreover, it is important to obtain this information nondestructively. In recent years, near-field microwave nondestructive evaluation methods, using open-ended rectangular waveguide probes, have …

Go to article

Upfc Control Employing Gradient Descent Search, William M. Siever, Radha P. Kalyani, Mariesa Crow, Daniel R. Tauritz Oct 2005

Upfc Control Employing Gradient Descent Search, William M. Siever, Radha P. Kalyani, Mariesa Crow, Daniel R. Tauritz

Electrical and Computer Engineering Faculty Research & Creative Works

Increasing demand coupled with limitations on new construction indicate that existing power transmission must be better controlled in order to continue reliable operation. Recent advances in FACTS devices provide a mechanism to better control power flow on the transmission network. One particular device, the unified power flow controller (UPFC), holds the most promise for maintaining operation even when the system has suffered partial failure (either naturally occurring, due to human error, or a malicious attack). In addition to the capital cost, the primary obstacles to widespread UPFC use are the combined problems of selecting the most cost effective locations for …

Go to article

Application Of Transmission Line Models To Backpanel Plated Through-Hole Via Design, Shaowei Deng, Todd H. Hubing, James L. Drewniak, Jun Fan, James L. Knighten, Norman W. Smith Oct 2005

Application Of Transmission Line Models To Backpanel Plated Through-Hole Via Design, Shaowei Deng, Todd H. Hubing, James L. Drewniak, Jun Fan, James L. Knighten, Norman W. Smith

Electrical and Computer Engineering Faculty Research & Creative Works

This paper introduces an approach of using a plated through-hole (PTH) via transmission-line model in the design of a thick printed circuit board, such as a backpanel. Full wave FEM modeling of a section of backpanel containing a differential via pair was compared with a transmission model. Computed values of the differential transmission loss agreed within an acceptable range for engineering studies, yet the transmission line model results required less than 2% of the computation time that the full wave model required. Effects of via spacing, via diameter and trace thickness were also examined.

Go to article

Voltage Regulator Module Noise Analysis For High-Volume Server Applications, Erdem Matoglu, N. Pham, Giuseppe Selli, Mauro Lai, Samuel R. Connor, James L. Drewniak, Bruce Archambeault, D. Wang, D. Kuhn, R. Hashemi, Daniel N. De Araujo, M. Cases, B. Wilkie, B. Herrman, P. Patel Oct 2005

Voltage Regulator Module Noise Analysis For High-Volume Server Applications, Erdem Matoglu, N. Pham, Giuseppe Selli, Mauro Lai, Samuel R. Connor, James L. Drewniak, Bruce Archambeault, D. Wang, D. Kuhn, R. Hashemi, Daniel N. De Araujo, M. Cases, B. Wilkie, B. Herrman, P. Patel

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presents a methodology to analyze voltage regulator module (VRM) noise coupling problems in high-volume server applications. The technique is applied on a real engineering design. The comprehensive model includes irregular power shapes, decoupling capacitors, and dielectric and conductive loss. Irregular shaped power plane modeling is cross-checked with four separate methods to demonstrate accuracy.

Go to article

Complex Power Distribution Network Investigation Using Spice Based Extraction From First Principle Formulations, Giuseppe Selli, James L. Drewniak, Richard E. Dubroff, Jun Fan, James L. Knighten, Norman W. Smith, Dean Mccoy, Bruce Archambeault, Stefano Grivet-Talocia, Flavio G. Canavero Oct 2005

Complex Power Distribution Network Investigation Using Spice Based Extraction From First Principle Formulations, Giuseppe Selli, James L. Drewniak, Richard E. Dubroff, Jun Fan, James L. Knighten, Norman W. Smith, Dean Mccoy, Bruce Archambeault, Stefano Grivet-Talocia, Flavio G. Canavero

Electrical and Computer Engineering Faculty Research & Creative Works

The modeling and the analysis of the power distribution networks (PDN) within multi-layer printed circuit board is crucial for the investigation of the performance of PCB systems. Carrying out such analyses in SPICE based tools has the advantage of being faster than the corresponding full-wave modeling and it allows obtaining both frequency and time domain results.

Go to article

Control Interaction Mitigation For The Unified Power Flow Controller, Liangying Dong, Mariesa Crow Oct 2005

Control Interaction Mitigation For The Unified Power Flow Controller, Liangying Dong, Mariesa Crow

Electrical and Computer Engineering Faculty Research & Creative Works

This paper establishes that dynamic interactions can occur between multiple UPFCs installed in power systems. The existence of the dynamic interactions can adversely affect the overall system performance and lead to system instability. This paper identifies two types of interactions among FACTS controllers: low frequency inter-area interaction and high frequency controller interactions. Several control approaches are proposed to mitigate these interactions. The IEEE New England 10-machine 39-bus system is used to demonstrate the existence of the control interactions and illustrate the effectiveness of the proposed interaction mitigation controls.

Go to article

Machine Design Considerations For The Future Energy Challenge, Jonathan W. Kimball, Marco Amrhein Oct 2005

Machine Design Considerations For The Future Energy Challenge, Jonathan W. Kimball, Marco Amrhein

Electrical and Computer Engineering Faculty Research & Creative Works

Motors consume a significant fraction of electricity in the United States and in the world. As part of the International Future Energy Challenge, student teams are endeavoring to improve the efficiency of fractional-horsepower machines. The present work summarizes the motor design and construction process for a 500 W prototype induction machine targeting efficiency above 80%. Analytical and finite-element results are shown.

Go to article

Qca-Based Majority Gate Design Under Radius Of Effect-Induced Faults, Zachary D. Patitz, Nohpill Park, Minsu Choi, Fred J. Meyer Oct 2005

Qca-Based Majority Gate Design Under Radius Of Effect-Induced Faults, Zachary D. Patitz, Nohpill Park, Minsu Choi, Fred J. Meyer

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presents reliable QCA cell structures for designing single clock-controlled majority gates with a tolerance to radius of effect-induced faults, for use as a basic building component for carry look-ahead adder. Realizable quantum computing is still well in the future due to the complexity of the quantum mechanics that govern them. In this regard, QCA-based system design is a challenging task since each cell''s state must interact with all the cells that are in its energy-effective range in its clocking zone, referred to as its radius of effect. This paper proposes a design approach for majority gates to overcome …

Go to article

Review Of Multiple Input Dc-Dc Converters For Electric And Hybrid Vehicles, Krishna P. Yalamanchili, Mehdi Ferdowsi Sep 2005

Review Of Multiple Input Dc-Dc Converters For Electric And Hybrid Vehicles, Krishna P. Yalamanchili, Mehdi Ferdowsi

Electrical and Computer Engineering Faculty Research & Creative Works

Batteries, ultra capacitors, fuel cells, and solar arrays are widely used in electric and hybrid vehicles (EVs/HVs) as an electric power source or an energy storage unit. In the structure of the electric power system of modern EVs/HVs, more than one of these units may be employed to improve the performance and efficiency; hence utilization of a multi-input DC-DC converter is inevitable to obtain a regulated bus DC voltage. In this paper, a review of multiple input DC-DC power electronic converters (MI-PEC) devoted to combine the power flow from several on-board energy sources of an EV/HV is presented. Several multi-input …

Go to article

Review Of Digital Control Techniques For Automotive Dc-Dc Converters, Dwaraka S. Padimiti, Mehdi Ferdowsi Sep 2005

Review Of Digital Control Techniques For Automotive Dc-Dc Converters, Dwaraka S. Padimiti, Mehdi Ferdowsi

Electrical and Computer Engineering Faculty Research & Creative Works

Electric and hybrid electric vehicles need a power plant that includes dc-dc converters. While using these converters, their control plays an important role in the overall performance of the vehicle. Due to their several drawbacks including poor communications, analog control schemes are not suitable for the automotive industry, whereas digital control methods successfully meet the demands. Various types of digital control techniques for dc-dc converters are studied and classified in this paper. The drawbacks and advantages of each method are described.

Go to article

Estimation Of Current From Near-Field Measurement, Haixiao Weng, Daryl G. Beetner, Richard E. Dubroff, Jin Shi Aug 2005

Estimation Of Current From Near-Field Measurement, Haixiao Weng, Daryl G. Beetner, Richard E. Dubroff, Jin Shi

Electrical and Computer Engineering Faculty Research & Creative Works

Knowledge of high-frequency currents in the chip and chip-package are necessary for EMI analysis and prediction, though measurement of these currents may be difficult to obtain in many cases. One possibility is to estimate currents from near-field scan data. In this paper, measurements were made of the magnetic field over a simple circuit and a chip package. The current flowing in the circuit and the chip lead frame was estimated from the compensated near-field data and compared with measurements made directly on the pins. Estimation was performed both with and without structural information of the lead frame. The susceptibility of …

Go to article

Neural Network Detection And Identification Of Electronic Devices Based On Their Unintended Emissions, Haixiao Weng, Xiaopeng Dong, Xiao Hu, Daryl G. Beetner, Todd H. Hubing, Donald C. Wunsch Aug 2005

Neural Network Detection And Identification Of Electronic Devices Based On Their Unintended Emissions, Haixiao Weng, Xiaopeng Dong, Xiao Hu, Daryl G. Beetner, Todd H. Hubing, Donald C. Wunsch

Electrical and Computer Engineering Faculty Research & Creative Works

Electromagnetic emissions were measured from several radio receivers to demonstrate the possibility of detecting and identifying these devices based on their unintended emissions. Radiated fields from the different radio receivers have unique characteristics that can be used to identify these devices by analyzing time-frequency plots of measured radiation. A neural network was also developed for automated device detection.

Go to article

Validation Of Circuit Extraction Procedure By Means Of Frequency And Time Domain Measurement, Giulio Antonini, Antonio Ciccomancini Scogna, Antonio Orlandi, Vittorio Ricchiuti, Giuseppe Selli, Shaofeng Luan, James L. Drewniak Aug 2005

Validation Of Circuit Extraction Procedure By Means Of Frequency And Time Domain Measurement, Giulio Antonini, Antonio Ciccomancini Scogna, Antonio Orlandi, Vittorio Ricchiuti, Giuseppe Selli, Shaofeng Luan, James L. Drewniak

Electrical and Computer Engineering Faculty Research & Creative Works

Aim of this paper is the validation in both frequency and time domain of the procedure to extract fully H-Spice compatible equivalent circuits of structures on printed circuit boards. The procedure is initiated by standard measurement of scattering parameters between 40MHz to 20GH. After the extraction of the equivalent circuit, the computed scattering parameters are compared with those measured. The same equivalent circuit is also used for transient analysis in order to compare TDR measurement and eye-pattern to a pseudo-random bit sequence with those coming from the simulations.

Go to article

First Prev Next Last