Engineering Commons^™

Sensor Embedding And Thermal Monitoring Strategies For Laser-Foil-Printing Additive Manufacturing, Tunay Turk

Doctoral Dissertations

"This work investigates Laser Foil Printing (LFP), a novel metal additive manufacturing (AM) process that fabricates parts layer-by-layer using metal foils. To enhance LFP productivity, the process steps were optimized, and an 88.1% reduction in processing duration was achieved. A unique aspect of this study was the introduction of laser polishing as an edge polishing technique within the LFP process. This innovative approach, employing an overlapping spiral pattern, leverages selective laser remelting and erosion to effectively suppress elevated edges. To stabilize the molten melt pool, a discrete spot scanning strategy was implemented. The fabricated parts were subjected to detailed analysis, …

Processing And Densification Of Multi-Phase High-Entropy Ceramics, Steven Smith

Doctoral Dissertations

"This work focuses on the processing and densification of multiphase, high-entropy ceramics to promote their use in friction stir welding technologies. Several high-entropy systems including high-entropy borides, carbides, and their composites were produced. Boro/carbothermal and carbothermal synthesis were used to produce high-entropy powders from oxide powder mixtures. Composites of high-entropy borides and high-entropy carbides were produced using a sequential approach to produce both phases. The carbide was first produced using carbothermal reduction, then ZrH2 and B4C were added to the carbide powder to produce the high-entropy boride phase. The resulting powder was densified by spark plasma sintering and pressureless sintering, …

Raft-Based Polymer And Nanoparticle Materials For Traumatic Brain Injury Treatment And Diagnostics, Aaron Priester

Doctoral Dissertations

"Traumatic brain injury (TBI) is a leading cause of death and disability worldwide. Neurodegenerative diseases that develop post-TBI can be, in part, attributed to DNA and cell-damaging reactive oxygen species (ROS) and lipid peroxidation products (LPOx). This thesis focused on overcoming the limits of current TBI material treatment approaches by employing a RAFT (reversible-addition fragmentation chain transfer) polymer approach that incorporated novel therapeutic, diagnostic and peptide-targeting monomers. An improved nanoparticle synthesis approach was also developed. Thiol and thioether-containing monomers neutralize both ROS and LPOx while Gd-containing monomers with enhanced magnetic resonance imaging (MRI) contrast provide diagnostics and material tracking in …

A Hybrid Data Processing, Computational Intelligence, And Complex Systems Modeling Approach For Describing And Predicting The Bitcoin Market, Oluwadamilare Akinpelu Omole

Doctoral Dissertations

"The Bitcoin market, like traditional financial markets, is a complex system with intricate interdependencies and nonlinear interactions among various market elements. This, coupled with the inherent uncertainty and high volatility present, makes predicting Bitcoin price movements difficult. The lack of understanding of the underlying market dynamics often results in significant losses for investors and traders. Existing studies have focused on the use of predictive models, which have not sufficiently captured the complexities of the market and cannot forecast extreme market events. This research endeavors to bridge this gap by combining data processing techniques, computational intelligence, and complex systems theory to …

Atmospheric Transport Of Radionuclides, Meteorological Data Mining & Synthesis For Site Data Supplementation, Ben Yao Sonpon

Doctoral Dissertations

"This research aligns with the NRC's vision of implementing risk-informed decision-making to support its regulatory charter. The suite of tools developed includes automated procedures for data mining and extracting meteorological (met) data from various national and regional repositories. A second data analytics tool automates the process of data fusion into a uniform format while preserving data fidelity. Autocorrelations were then established, and correlation coefficients were calculated between the Callaway Nuclear Power Plant (Callaway) and nearby off-site weather stations. The complexity of these correlations depends on factors such as physical proximity, geographic features, and topology, potentially necessitating multivariate analysis (MVA). Furthermore, …

Oxidation Behavior Of Silicon Carbide, Matrix Graphite, And Refractory Multi-Principal Element Alloy, Visharad Jalan

Doctoral Dissertations

"The present study focuses on the investigation of the oxidation behavior of silicon carbide, matrix graphite in a water vapor environment. It also examines the oxidation behavior of refractory multi-principal element alloys when exposed to air. The oxidation behavior of silicon carbide and matrix graphite were investigated in conditions pertaining to off-normal incidents in high-temperature gas-cooled nuclear reactors. Understanding this is crucial for the prediction of their performance in such accidents and ensuring that the nuclear reactor is accident tolerant. Upon exposure to water vapor, the two A3-based matrix graphite exhibited different behaviors. The A3-27 type showed oxidation in all …

Shock Wave And Vortex Ring Dynamics From Explosively Driven Shock Tunnels, Rachel Louise Bauer

Doctoral Dissertations

"Blast and shock tubes are frequently used to create shock waves to study their effects and impacts on structures, humans, and personal protective equipment. These tubes are also found in other industries including wind tunnels for aerodynamic testing, jet engines for propulsion research, spacecraft reentry simulations, and industrial applications such as material testing and high-velocity impact studies. Despite their widespread use, there is no standard design, with variations in geometry, size, and energy sources. Current research only evaluates the peak pressure of the shock wave produced and does not consider the effects of changing the size or geometry of the …

The Evolving Use Of Strategic Planning Tools In The Manufacturing Environment: Implications For Quality 4.0 And Beyond, Richard Lee Wilson

Doctoral Dissertations

"Having a strong strategic plan is critical for success for any business no matter the size of the organization, the product or service they provide, or the industry they serve. There are many methods businesses use to develop their strategic plans. One such method is known as Hoshin Kanri, which has been in use for decades. However, recent years have seen an increase in artificial intelligence, big data, data analytics, and other technology tools to create cyber physical systems on the manufacturing floor. The increase in technology in manufacturing to integrate cyber systems with physical systems spawned a new industrial …

Transport And Plugging Behavior Of Co2-Resistant Preformed Particle Gels In High Conductive Channels For Conformance Control, Adel Alotibi

Doctoral Dissertations

"Improving oil recovery is essential with rising global oil demand and declining production in mature fields. CO₂ flooding has been widely applied as a major Enhanced Oil Recovery (EOR) method due to its effectiveness in boosting oil recovery while enabling safe carbon storage in the subsurface. However, in fractured and highly heterogeneous reservoirs, CO₂ often flows through paths of least resistance, leading to early breakthrough or quick excessive CO₂ production and leaving substantial oil in unswept zones or areas. Traditional in-situ polymer gels have been applied to control CO₂ flooding conformance, their performance has been varied, …

Development And Testing Of Irradiation-Tolerant High-Entropy Alloys, Matthew John Luebbe

Doctoral Dissertations

"High entropy alloys (HEAs) are a novel class of alloys made of multiple principal elements in near equal proportions. They have been observed to possess an array of useful engineering properties, such as good ductility and fracture toughness, high temperature strength, oxidation and corrosion resistance and irradiation resistance. This makes them promising candidates for harsh environments, especially nuclear reactors. These properties could potentially realize advanced Gen IV nuclear reactor designs. However, most HEA compositions contain Co, which activates under irradiation, generating safety and waste management concerns. This work studies three compositions of Co-free HEAs whose strength and microstructures are evaluated …

Investigation Of Shockwave Behavior To Inform Helmet Design Using Schlieren Imagery And Free-Field Blasts, Cody Jh Thomas

Doctoral Dissertations

"Ballistic resistance of military helmet designs is a prioritized feature to protect warfighters from traumatic brain injury. However, injuries from shock-based threats have not been optimized for warfighter protection and have resulted in the prevalence of blast-induced traumatic brain injury (bTBI). Research gaps were identified in understanding the under wash effect using free field blasts and schlieren imagery. Thus, the following were investigated: (1) overpressure changes on a warfighter’s head due to directionality from a blast, (2) shock wave dampening effects of viscoelastic materials in helmets, and (3) geometric effects of a helmet brim design in the reduction of bTBI. …

Nmr Relaxometry Approach For The Detection Of Asphalt Binder Performance Properties, Rebecca Herndon

Doctoral Dissertations

"Asphalt is a necessary material for transportation infrastructure. Understanding the material properties of asphalt binders is critical for improving infrastructure and enhancing the lifetime of pavements. While the physical properties of asphalt binders are well-defined by standard procedures and parameters, the chemical environment lacks definition. Physical parameters like viscosity and stiffness are traditionally used to differentiate asphalt binders, describe aging, and indicate the impact of additives. However, these tests have limited insight into the material's chemical environment. Therefore, a nondestructive analytical technique, nuclear magnetic resonance (NMR) relaxometry, was employed to investigate the chemical environment of asphalt binders. Although NMR relaxometry …

Vibration Modeling Of Rectangular Plates And Application To Solar Cell Dust Mitigation, Jeremiah John Rittenhouse

Doctoral Dissertations

"Many engineering structures can be modeled as rectangular plates, including solar cells. Carefully controlled plate vibration can be useful to solve an engineering problem, such as lunar dust accumulation on solar cells, which blocks light and reduces power generation. For this application, plate vibration at resonance is studied and used experimentally to eject lunar dust from a solar cell.

Piezoelectric actuator placement on the inactive side of a solar cell to induce vibration dust mitigation from the active side of the cell is presented in this work. Three solar cell prototypes were created and tested for efficacy, resulting in an …

New Topologies For High Voltage Gain Dc-Dc Power Electronic Converters – Theoretical Analysis And Experimental Validation, Saeed Habibi

Doctoral Dissertations

"This dissertation is focused on developing and analyzing new high voltage gain DC-DC power electronic converters. The proposed converters in this dissertation are suitable candidates for connecting low voltage sources such as photovoltaic (PV) panels or fuel cell (FC) stacks to a DC microgrid or DC link of an inverter. The proposed converters provide desired characteristics such as high voltage gain at a low or medium duty cycle values, low voltage stress on power semiconductors, and continuous input current. Initially, the research introduces three novel converter topologies: First, two quadratic converters based on the combination of a three-winding coupled inductor …

Characterization And Modeling Of Properties Of Unsaturated And Partially Damaged Cement-Based Materials, Rezwana Binte Hafiz

Doctoral Dissertations

"Transport properties, governing the resistance of cement-based materials to harmful substances are essential considerations for long-term performance. This study addressed the often-overlooked dimension of transport properties in unsaturated cement-based materials, crucial as most concrete structures face variable environmental conditions, leading to partial saturation. A two-scale model was introduced, enhancing our comprehension of transport properties in conditions reflecting real-world scenarios. Empirical correlation representing bulk paste characteristics was established, facilitating the upscaling of properties to mortar and concrete. The model was extended to predict the transport properties of mortar as well.

Environmental factors can contribute to the degradation of cement-based materials, with …

Advancing Refuge Alternatives In Mine Emergencies Using Advanced Numerical Simulation, Kutay Emre Karadeniz

Doctoral Dissertations

"Incidents and emergencies within underground coal mines can result in severe injuries or even loss of life, particularly due to the hazardous nature of mine explosions. One of the options for the miners to protect themselves from these hazards is to be sheltered in a refuge alternative (RA). However, the literature lacks an analysis of survivability constraints and the structural integrity of RAs when exposed to geomechanical changes and the ability to withstand the impact of coal mine explosions. In this study, based on the utilization and survivability constraints, basic human requirements and the required physical specifications of RAs during …

Additive Manufacturing Of Multifunctional Materials And Composites, John Michael Pappas

Doctoral Dissertations

"This research focused on developing fundamental knowledge of process-material interactions for additive manufacturing of multifunctional materials that are highly desirable in high-tech industries for potential weight and space savings. Multifunctional materials are very sensitive to defects, which severely hinder performance. Thus, defect formation was systematically studied to develop strategies and methodologies to efficiently fabricate high-performance materials and composites. Blown-powder-based laser additive manufacturing of transparent spinel ceramics was investigated to reduce porosity and cracking, defects that hindered transparency and mechanical properties. A systematic study of processing parameters revealed that laser power and powder flow rate had the largest effects on defect …

Experimental Investgation Of Core Fluid And Heat Transfer Of Pwr By Using Advanced Measurments Techniques, Saud Aldawood

Doctoral Dissertations

This comprehensive study investigates the thermal-hydraulic mechanisms and convective heat transfer characteristics within (PWRs), with a focus on (SMRs) under both single-phase and two-phase bubbly flow conditions. Specifically, the research investigates the complex bubble dynamics in two-phase flow rod bundles, which are crucial for understanding reactor behavior during loss-of-coolant accidents (LOCA). Employing an advanced experimental setup developed at the (mFReel) at MST, this work measures critical parameters such as void fraction, bubble passage frequency, bubble velocity, bubble chord length, and interfacial area concentration (IAC) using a four-tip optical probe across various locations in the rod bundle. The findings reveal that …

Nano-Micro Engineering For Advanced Energy Devices, Tazdik Patwary Plateau

Doctoral Dissertations

The development of advanced materials and manufacturing techniques for energy storage devices is continuously growing. The research emphasizes micro-engineering, nano-engineering, and advanced materials science, with the goal of enhancing the performance and scalability of manufacturing methods of different materials processing with a view of achieving sustainability. In the micro-engineering domain, novel methods for fabricating thick electrodes with short diffusion paths are introduced, enabling higher mass loading and improved battery performance. Additionally, innovative strategies for optimizing the performance of carbon nanofibers (CNFs) as anode materials in LIBs are explored in the nano-engineering domain. These studies address key challenges such as inter-bonding …

Ceramic Dielectrics For High Temperature Capacitor Applications, Alan Daniel Devoe

Doctoral Dissertations

Technical progress in microelectronics is allowing operation in environments that were previously considered impossible. Building complete electronic circuits for applications above 450 degrees C, such as the planned NASA missions to Venus, require a variety of active and passive components, including multilayer ceramic capacitors (MLCC).

This study explores calcium zirconate CaZrO3 and magnesium oxide MgO based dielectric compositions for MLCC applications that are capable of operating at extreme temperatures between 450 degrees C and 600 degrees C. Both materials were characterized with respect to impurities, dopants, crystal structure and microstructural development. Dielectric properties were measured to determine permittivity, dissipation factor, …

On The Importance Of Novel Adsorption Processes And Structured Adsorbents For Biogas Upgrading And Storage, Kyle Newport

Doctoral Dissertations

The current adsorption processes investigated for biogas upgrading encounter severe challenges with regards to both adsorbents and processes, which necessitate the design and development of novel approaches to effectively separate carbon dioxide from methane and, hence, produce pipeline-grade renewable natural gas (RNG) as a fuel. These key challenges include (i) moderate CO2/CH4 selectivity, (ii) relatively long cycle times, (iii) high regeneration energy requirements, (iv) high-pressure drop, and (v) short adsorbent lifetime. The current biogas upgrading processes typically rely on pressure swing adsorption (PSA) or temperature swing adsorption (TSA). While PSA cycles are fast, the system requires large amounts of energy …

Characterizations Of Eco-Friendly Class C Fly Ash-Based Alkali-Activated Mixtures For Various 3d-Printing Techniques, Fareh Abudawaba

Doctoral Dissertations

This study explored the potential of using high-calcium class C fly ash (FA) as the main precursor for synthesizing alkali-activated mortar (AAM) suitable for 3D-printed concrete (3DPC) applications. The objective was to broaden the selection of AAMs, designed to suit various printing techniques, including continuous mixing and pumping, large batch mixing, and set-on-demand processes. The study began by assessing the fresh properties of various mixtures, utilizing tests such as open time (OT), initial setting time (IST), immediate axial deformation, and penetration test (PT), to determine the mixtures' extrudability and buildability. The study optimized mixtures with a broad spectrum of cycle …

Power Supply Induced Jitter Analysis In High-Speed Drivers, Yifan Ding

Doctoral Dissertations

The Input/Output Buffer Information Specification (IBIS) model faces challenges in accurately simulating power-supply-induced jitter (PSIJ), particularly under nonlinear and time-varying power noise conditions with pre-driver stages. This work introduces advancements in IBIS model modification algorithms to enhance PSIJ simulation accuracy for high-speed drivers.

First, a correction coefficient-based approach was developed to adjust switching coefficients K_pu and K_pd using pre-driver DC jitter sensitivity, significantly improving model robustness under DC and AC power noise. However, its effectiveness diminished under large noise amplitudes due to coefficient shape dominance.

To address this, a simplified algorithm bypassed correction coefficient, directly correlating switching transitions with jitter …

A Comprehensive Analysis Of Climate Resilience Strategies For Small Island Developing States, Ashley-Ann Davis

Doctoral Dissertations

Small Island Developing States (SIDS) face unique and disproportionate challenges in their efforts to achieve climate resilience due to their geographic vulnerabilities, limited resources, and systemic economic and social constraints. This dissertation provides a comprehensive analysis of climate resilience strategies tailored to SIDS, addressing critical systemic issues and exploring interdisciplinary solutions. It synthesizes findings across four interconnected studies, including an analysis of disaster preparedness and response mechanisms in developing countries to identify gaps and opportunities for improving resilience in extreme events. The research investigates economic factors influencing energy portfolio transitions in the Caribbean, emphasizing the complexities of renewable energy adoption. …

Thermal Hydraulics Investigation Of A Horizontal Dual Channel Setup Representing Micro Nuclear Reactors Using Integrated Advanced Measurement Techniques, Zeyad Zeitoun

Doctoral Dissertations

The urgency to reduce greenhouse gas emissions has spotlighted nuclear energy as a carbon-free solution. Despite its promise, nuclear safety concerns, highlighted by the 2011 Fukushima disaster, necessitate advancements in reactor technology. The United States has prioritized the development of safer, prismatic micronuclear reactors for the coming decade, focusing on the safe operation of these facilities. These reactors' design addresses potential hazards, particularly in loss of flow accident scenarios, making the understanding of natural circulation gas flow dynamics critical. Experiments on a horizontal dual-channel plenum-to-plenum facility (P2PF) were conducted to closely mimic the conditions within prismatic micronuclear reactors. This study …

Investigation Of The Transport And Plugging Behavior Of Preformed Particle Gels (Ppgs) In Fractures For Conformance Control In Carbonate Reservoirs, Abdulaziz A. Almakimi

Doctoral Dissertations

This study aims to systematically evaluate the performance of preformed particle gels (PPGs) in fractured carbonates mainly through a series of core flooding experiments. Carbonate reservoirs exhibit unique features of heterogeneity and pore geometry, while (PPGs) are known for their plugging efficiency, deformability, and dehydratable nature. The main goal of gel injection in fractured reservoirs is to place a gel pack appropriately into the fracture, diverting injected fluid to the oil-bearing matrix and reducing excessive water production. However, considerable dehydration of (PPGs) is possible at the adjacent matrix and within the fracture, which could lead to a filter-cake formation and/or …

Implication And Applications Of Machine Learning On Biomedical Images, Jason Hagerty

Doctoral Dissertations

Medical imaging ranges in modality including computer tomography imaging, x-ray imaging, digital microscopy, and macro-focus dermoscopy images. The latter two modalities are the focus of the presented work.

To perform a diagnostic evaluation on the captured dermoscopy image, it begins with what is usually a labor-intensive operation that requires an expert to perform the initial segmentation for localizing a region of interest (ROI). Once that ROI is obtained, a physician with years of training and experience will observe biological markers that can be used to visually differentiate whether a lesion is benign or malignant. A similar process is used for …

Float: A Multi-Scale Flood Loss Assessment Tool Developed From Experimentally Derived Material Damage, Anna Katya Opel

Doctoral Dissertations

Current practice of flood loss prediction presents limitations in accurately predicting building flood losses at multiple scales. While whole-building estimates can more accurately predict high-level losses (i.e., large groups of buildings), a significant analysis error is revealed with small-scale (i.e., individual, or small groups of buildings) investigation. The novel approach of collecting experimental flood data to support damage estimation has provided sufficient evidence that current damage models can and do under or overestimate loss. This research has developed a multi-scale approach to assessing flood losses based on experimentally derived material damage. The methodology is stored and accessible in a multi-scale …

Computational Design Of Complex Concentrated Alloys, Hamid Sharifi

Doctoral Dissertations

A high-throughput parameterization of modified embedded atom model (MEAM) interatomic potentials for combinations of Cu, Ti, Ni, Cr, Co, Al, Fe, and Mn was carried out using a genetic algorithm. Unary systems were parameterized based on DFT calculations and experimental results. MEAM potentials for 28 binary and 56 ternary combinations of the elements were parameterized to DFT results that were carried out with semi-automated frameworks. Specific attention was made to reproduce properties that impact compositional segregation, material strength, and mechanics. Utilizing the MEAM interatomic potentials and a Monte Carlo scheme, phase segregation in the CrNiCo, CuNiCr and CuNiCo fcc alloys …

Effectiveness Of Virtual Reality Training Environments, Lindsay Kristina Gouedy

Doctoral Dissertations

As technology has evolved so has training methodology in many applied fields. Training of aviation professionals is adapting by including technology features that allow for safer and less costly training methods. Pilot training is expensive given the number of flight hours and all that is included in the cost of flying an airplane. The main goal of this project is to assess the efficacy of the use of virtual reality environments as a valid training tool. Based on our literature review, we hypothesized that trainees perform simulated flight tasks more efficiently, with fewer errors, when trained using VR technology. The …