Engineering Commons^™

Postcyclic Behavior Of Low-Plasticity Silt, Shuying Wang

Doctoral Dissertations

"Liquefaction of low-plasticity silt has been reported during earthquakes in the recent past. Excess pore pressure builds up due to the dynamic loading and then dissipates. The postcyclic behavior of low-plasticity silt was investigated in this research for materials obtained from the Mississippi River Valley. The experimental program involved specimen preparation using a slurry consolidation approach. A special technique was developed for specimen movement, reducing the testing program time by half. Both static and cyclic triaxial tests were conducted to confirm the ability to prepare replica specimens. In order to characterize the monotonic behavior, triaxial tests were conducted to determine …

Advanced Composites Using Non-Autoclave Processes: Manufacturing And Characterization, V. G. K. Menta

Doctoral Dissertations

"The objective of the present study is to develop non-autoclave processes to manufacture high performance composites for aerospace applications. In Paper 1, vacuum assisted resin transfer molding (VARTM) process was developed for elevated temperature composites. Use of VARTM process for fabricating high temperature resins presents unique challenges such as high porosity and low fiber volume contents. Two different vacuum bagging methods: Seeman Composite Resin Infusion Molding Process (SCRIMP) and Double Vacuum Bagging Infusion (DVBI) process were evaluated. Flow simulation tool was used to predict key flow parameters needed for the successful infusion. In Paper 2, honeycomb sandwich panels were manufactured …

Assessing System Architectures: The Canonical Decomposition Fuzzy Comparative Methodology, Jason Paul Dauby

Doctoral Dissertations

"The impacts of decisions made during the selection of the system architecture propagate throughout the entire system lifecycle. The challenge for system architects is to perform a realistic assessment of an inherently ambiguous system concept. Subject matter expert interpretations, intuition, and heuristics are performed quickly and guide system development in the right overall direction, but these methods are subjective and unrepeatable. Traditional analytical assessments dismiss complexity in a system by assuming severability between system components and are intolerant of ambiguity. To be defensible, a suitable methodology must be repeatable, analytically rigorous, and yet tolerant of ambiguity. The hypothesis for this …

Additivity Of Strengthening Mechanisms In Ultrafine Grained Aluminum Alloy, Nilesh Kumar

Doctoral Dissertations

"Friction stir processing (FSP) has been used in the present work to obtain ultrafine grained (UFG) microstructure in a twin-roll cast (TRC) Al-Mg-Sc alloy. An attempt has been made to establish a correlation between processing, microstructure, and properties (mechanical) in UFG regime for this alloy system.

The effect of initial microstructural conditions and processing parameters (tool rotation rate) were shown to have a profound impact on the development of UFG microstructure. FSP led to a microstructure consisting of grains with an average grain size as small as 390 nm, having high angle grain boundaries and a completely random texture. The …

Femtosecond Laser Micromachining Of Microstructures For Sensing And Detection, Yukun Han

Doctoral Dissertations

"This thesis focuses on the fabrication and analysis of miniature functional devices that can be used for different sensing and detection applications. As the first step, the surface characteristics and morphology of the micro/nano structures on substrates (fused silica and silicon) fabricated in water and in air by femtosecond laser were investigated. Based on this study, three micro devices have been designed and fabricated by femtosecond laser, and they were analyzed for optical and chemical sensing and detections. The three micro devices are: 1) an optical Fabry-Perot interferometer in optical fiber (made from fused silica) with smooth cavity surfaces. The …

Impact Of Stochastic Loads And Generations On Power System Transient Stability, Theresa Odun-Ayo

Doctoral Dissertations

"Randomness in physical systems is usually ultimately attributed to external noise. Dynamic systems are driven not only by our own control inputs, but also disturbances which cannot be modeled deterministically. A linear system model is justifiable for a number of reasons, often such a model is adequate for the purpose at hand, and when non-linearities do exist, the typical engineering approach is to linearize about some nominal point or trajectory to achieve a perturbation or error model. However, in order for the resulting model to fit data generated by the real world, these disturbances need to be modeled stochastically. The …

Exploratory Study Of Barriers To Use Of Feigenbaum's Quality Cost Strategy Within Design Engineering Firms, David Patrick Loduca

Doctoral Dissertations

"It has been more than a half century since Armand Feigenbaum first conceived of the strategy for the manufacturing sector, yet quality costing strategies have not found a foothold among engineering firms. This study was aimed at constructing a set of theories that explains possible barriers to acceptance of the Feigenbaum strategy by analyzing attitudes and opinions of players in an actual engineering firm and the culture in which they work.

Modeled after the Feigenbaum approach and tailored to the business model of engineering and architectural firms, a system was developed to classify and record costs of quality. A local …

Hardware Emulation Of Wireless Communication Fading Channels, Fei Ren

Doctoral Dissertations

"This dissertation investigates several main challenges to implementing hardware-based wireless fading channel emulators with emphasis on incorporating accurate correlation properties. Multiple-input multiple-output (MIMO) fading channels are usually triply-selective with three types of correlation: temporal correlation, inter-tap correlation, and spatial correlation. The proposed emulators implement the triply-selective fading Channel Impulse Response (CIR) by incorporating the three types of correlation into multiple uncorrelated frequency-flat Rayleigh fading waveforms while meeting real-time requirements for high data-rate, large-sized MIMO, and/or long CIR channels. Specifically, mixed parallel-serial computational structures are implemented for Kronecker products of the correlation matrices, which makes the best tradeoff between computational speed …

Approximate Dynamic Programming Solutions With A Single Network Adaptive Critic For A Class Of Nonlinear Systems, Jie Ding

Doctoral Dissertations

"Approximate dynamic programming formulation implemented with an Adaptive Critic (AC) based neural network (NN) structure has evolved as a powerful technique for solving the Hamilton-Jacobi-Bellman (HJB) equations. As interest in ADP and the AC solutions are escalating with time, there is a dire need to consider possible enabling factors for their implementations. A typical AC structure consists of two interacting NNs which is computationally expensive. In this work, a new architecture, called the "Cost Function Based Single Network Adaptive Critic (J-SNAC)" is presented that eliminates one of the networks in a typical AC structure. This approach is applicable to a …

Biodegradable Polymer/Clay Nanocomposites Based On Poly(Butylene Adipate-Co-Terephthalate) And Polylactide, Mahin Shahlari

Doctoral Dissertations

"In offering a scientifically succinct methodology which leads to property-enhanced biodegradable polymer products for broader application, as well as in promoting the use of bio-sourced renewable polymers such as Polylactide (PLA) in biodegradable polymers with desirable properties from petroleum based polymers such as PBAT, this study and its results both directly and indirectly contribute to the technological solutions that address growing environmental and energy problems caused by the increased use of and reliance upon nondegradable, nonrenewable, petroleum-based plastics. This work studied blends of PBAT and PLA compounded with organoclay through direct melt mixing in a twin-screw extruder and a batch …

Development Of A Fuel Cell Plug-In Hybrid Electric Vehicle And Vehicle Simulator For Energy Management Assessment, Andrew Meintz

Doctoral Dissertations

"This dissertation offers a description of the development of a fuel cell plug-in hybrid electric vehicle focusing on the propulsion architecture selection, propulsion system control, and high-level energy management. Two energy management techniques have been developed and implemented for real-time control of the vehicle. The first method is a heuristic method that relies on a short-term moving average of the vehicle power requirements. The second method utilizes an affine function of the short-term and long-term moving average vehicle power requirements. The development process of these methods has required the creation of a vehicle simulator capable of estimating the effect of …

Dynamic Ergonomic Analysis And Simulation Of Fastening Operation, Akul Joshi

Doctoral Dissertations

"Operator performing fastening operation with powered hand-tools at awkward postures is subjected to external forces that may pose a risk of developing ergonomic injuries. For design of safe workplaces and selection of tools it is necessary to identify the probable causes of discomfort by simulating the work conditions and quantifying the risk factors. An ergonomic simulator is developed to simulate the fastening operation and quantify the effects of posture and force in fastening operation. The effect of dynamic forces is analyzed using two approaches. The first approach analyzes the effect of tool vibration while the second analyzes the hand-arm system …

Leaching Characteristics Of Inorganic Contaminants From Coal Fly Ash, Tingzhi Su

Doctoral Dissertations

"Leaching of trace elements raises environmental concerns in coal fly ash disposal and reuse. US EPA is in the process of creating the first national rule on coal ash management. However, due to the complexity of coal fly ash composition, the leaching characteristics of trace elements are not well understood. Meanwhile, driven by the tightening emission regulations, new types of coal fly ashes are continuously generated as a result of the technological evolution at coal energy industry. The changing landscape highlights the needs for a comprehensive database to assess the leaching characteristics of different types of coal fly ashes, evaluation …

Sandwich Structures With Advanced Facings, Cody H. Nguyen

Doctoral Dissertations

"The purpose of this research is to investigate potential advantages of two innovative designs of sandwich panels. The first design involves sandwich panels with a piece-wise thickness of the facings aiming at two possible outcomes: (I) improved the structural response, i.e. strength and stiffness, without increasing the weight of the structure or (2) reduction in the weight of the structure without a detriment to its structural response. The analysis is conducted analytically using the first-order shear deformation theory and numerically by the finite element analysis of conventional and stepped-wise sandwich panels. The applicability of the first-order shear deformation theory to …

Processing And Characterization Of Boron Carbide-Hafnium Diboride Ceramics, Harlan J. Brown-Shaklee

Doctoral Dissertations

"Hafnium diboride based ceramics are promising candidate materials for advanced aerospace and nuclear reactor components. The effectiveness of boron carbide and carbon as HfB₂ sintering additives was systematically evaluated. In the first stage of the research, boron carbide and carbon additives were found to improve the densification behavior of milled HfB₂ powder in part by removing oxides at the HfB₂ surface during processing. Boron carbide additives reduced the hot pressing temperature of HfB₂ by 150⁰C compared to carbon, which reduced the hot pressing temperature by ~50⁰C. Reduction of oxide impurities alone could not explain the difference in sintering enhancement, however, …

Spiking Neural Networks And Their Applications, Cameron Eric Johnson

Doctoral Dissertations

"Artificial neural networks (ANNs) have been developed as adaptable, robust function approximators for at least the last quarter-century. They have progressed through two generations, and the third is now under development. Spiking neural networks (SNNs) seek to improve on previous generations in two ways: by using a more biologically-inspired neuron, they are shown to be capable of more complex calculations; incorporating polychronous properties of highly-recurrent networks with delays of different lengths on each synapse to achieve large numbers of possible patterns with relatively few neurons and synapses.

Abstracted spiking neurons have been used as a third-generation activation function in a …

Surface Modification Of Micro-Fluidic Devices, Zhan Gao

Doctoral Dissertations

"The surface modification, fabrication and characterization of microfluidic sensor systems for oxygen and glucose measurements with the use of polymeric materials were investigated in this dissertation. This dissertation is prepared in publication format. The first manuscript focuses on the surface modification of SU -8 layer to enhance the wettability. The improvement of wettability is critical since biofouling can be minimized during bioanalysis. A novel in situ photopattemable grafting technology was used to attach biocompatible polymer layers on SU-8 surface, changing its property from hydrophobicity to hydrophilicity. The results were confirmed by contact angle measurement and Fourier Transform Infrared (FTIR) spectra. …

Enhanced Heavy Oil Recovery By Alkali-Surfactant In The Pennsylvania Warner Sandstone, Rabia Mohamed Hunky

Doctoral Dissertations

"In this research, a study of the non-thermal method of alkaline-surfactant (AS) flooding to enhance heavy oil recovery from the Pennsylvanian Warner sandstone reservoir in Western Missouri was conducted. This work includ [sic] testing approximately 30 commercial surfactants and using a heavy oil sample with an API of 17. It was found that a number of surfactants could create stable emulsions. The viscosity of heavy oil could be reduced from 18,518 cp to 2.5 cp at 25⁰C through emulsification of certain surfactants. One of the major findings was that the emulsion created by the commercial surfactant, Igepalʼ CO-530 was stable …

Surface Morphology Of Platelet Adhesion Influenced By Activators, Inhibitors And Shear Stress, Melanie Groan Watson

Doctoral Dissertations

Platelet activation involves multiple events, one of which is the generation and release of nitric oxide (NO), a platelet aggregation inhibitor. Platelets simultaneously send and receive various agents that promote a positive and negative feedback control system during hemostasis. Although the purpose of platelet-derived NO is not fully understood, NO is known to inhibit platelet recruitment. NO's relatively large diffusion coefficient allows it to diffuse more rapidly than platelet agonists. It may thus be able to inhibit recruitment of platelets near the periphery of a growing thrombus before agonists have substantially accumulated in those regions.

Results from two studies in …

An Improved Layer-By-Layer Self-Assembly Technique To Generate Biointerfaces For Platelet Adhesion Studies: Dynamic Lbl, Juan Manuel Lopez

Doctoral Dissertations

Layer-by-layer self-assembly (LbL) is a technique that generates engineered nano-scale films, coatings, and particles. These nanoscale films have recently been used in multiple biomedical applications. Concurrently, microfabrication methods and advances in microfluidics are being developed and combined to create "Lab-on-a-Chip" technologies. The potential to perform complex biological assays in vitro as a first-line screening technique before moving on to animal models has made the concept of lab on a chip a valuable research tool.

Prior studies in the Biofluids Laboratory at Louisiana Tech have used layer-by-layer and in vitro biological assays to study thrombogenesis in a controlled, repeatable, engineered environment. …

Halloysite Clay Nanotubes For Controlled Delivery Of Chemically Active Agents, Elshard Abdullayev

Doctoral Dissertations

In this work we explored the capabilities of halloysite nanotubes as capsules for encapsulation and controlled delivery of the chemically and biologically active substances. Halloysite is a two-layered aluminosilicate which has a predominantly hollow tubular structure in the submicron range and is chemically similar to kaolinite [1, 2].

In the first section of this work, we analyzed the structure of the halloysite nanotubes as well as its capability to encapsulate and deliver biologically and chemically active agents, similarities and differences between release characteristics of different agents and how these differences relate with their chemical structure. Models were used to describe …

Classification Of Emg Signals To Control A Prosthetic Hand Using Time-Frequesncy Representations And Support Vector Machines, Juan Manuel Fontana

Doctoral Dissertations

Myoelectric signals (MES) are viable control signals for externally-powered prosthetic devices. They may improve both the functionality and the cosmetic appearance of these devices. Conventional controllers, based on the signal's amplitude features in the control strategy, lack a large number of controllable states because signals from independent muscles are required for each degree of freedom (DoF) of the device. Myoelectric pattern recognition systems can overcome this problem by discriminating different residual muscle movements instead of contraction levels of individual muscles. However, the lack of long-term robustness in these systems and the design of counter-intuitive control/command interfaces have resulted in low …

Nonlinear Control Strategy For A Cost Effective Myoelectric Prosthetic Hand, Cristian Federico Pasluosta

Doctoral Dissertations

The loss of a limb tremendously impacts the life of the affected individual. In the past decades, researchers have been developing artificial limbs that may return some of the missing functions and cosmetics. However, the development of dexterous mechanisms capable of mimicking the function of the human hand is a complex venture. Even though myoelectric prostheses have advanced, several issues remain to be solved before an artificial limb may be comparable to its human counterpart. Moreover, the high cost of advanced limbs prevents their widespread use among the low-income population.

This dissertation presents a strategy for the low-level of control …

Modeling And Its Numerical Method For Micro-Scaled Diffusion -Reaction Systems In The Neuromuscular Junction, Abdul Khaliq

Doctoral Dissertations

The main subject of this research is the neuromuscular junction (NMJ). The NMJ is a biological structure composed of the interface between a neuron and a muscle cell. Currently, there is not a fully three dimensional model of diffusion-reaction processes occurring in the NMJ. Developing a useful predictive model of this structure will assist in the therapeutic efforts to restore and rehabilitate NMJ function to humans and in developing strategies to prevent damage to the NMJ. This research work developed 1D mass transport and full 3D reaction diffusion models. A new finite difference scheme is presented for solving 1D mass …

In Vivo Non-Invasive Monitoring Of Optically Resonant Metal Nanoparticles Using Multi-Wavelength Photoplethysmography, Gregory J. Michalak

Doctoral Dissertations

Nanotechnology has recently emerged as a powerful modality in many biomedical applications. In particular, several classes of nanoparticles have been employed as cancer therapy and imaging contrast agents. These particles can have architecture of varying complexity, depending on their specific application. These complex architectures are achieved by various chemical techniques usually performed in specific sequences to add complexity and functionality. One such class of nanoparticle, used in tumor treatment and as contrast agents in several optical imaging techniques, is the plasmon resonant metal nanoparticle. The most common metal used for these particles is gold because of its biocompatibility, lack of …

Elimination Of Deck Joints Using A Corrosion Resistant Frp Approach, Ashok Reddy Aleti

Doctoral Dissertations

The research presented herein describes the development of durable link slabs for jointless bridge decks based on using FRP grid for reinforcement. Specifically, the ductility of the FRP material was utilized to accommodate bridge deck deformations imposed by girder deflection, temperature variations, and concrete shrinkage. It would also provide a solution to a number of deterioration problems associated with bridge deck joints.

The design concept of the link slabs was then examined to form the basis of design for FRP grid link slabs. Improved design of FRP grid link slab/concrete deck slab interface was confirmed in the numerical analysis. The …

Mitigation Of Chloride And Sulfate Based Corrosion In Reinforced Concrete Via Electrokinetic Nanoparticle Treatment, Kunal Kupwade-Patil

Doctoral Dissertations

Concrete is a porous material which is susceptible to the migration of highly deleterious species such as chlorides and sulfates. Various external sources, including sea salt spray, direct seawater wetting, deicing salts and chlorides can contaminate reinforced concrete. Chlorides diffuse into the capillary pores of concrete and come into contact with the reinforcement. When chloride concentration at the reinforcement exceeds a threshold level it breaks down the passive oxide layer, leading to chloride induced corrosion. The application of electrokinetics using positively charged nanoparticles for corrosion protection in reinforced concrete structures is an emerging technology. This technique involves the principle of …

Experimental Investigation Of Flow And Heat Transfer Characteristics Of R -134a In Microchannels, Abdullahel Bari

Doctoral Dissertations

The purpose of this study was to investigate the flow and heat transfer characteristics of liquid refrigerant R-134a in rectangular microchannels. The research concentrated mostly upon single-phase experiments with limited investigation of boiling phenomenon in microchannels. Tests were performed using rectangular microchannels with hydraulic diameters ranging from 112 μm to 210 μm and aspect ratios varying approximately from 1.0 to 1.5. The Reynolds number in the experiments ranged from 1,200 to 13,000 although most data were collected in the transition and turbulent flow regimes.

The experimental data for friction factor measurement had a similar trend as predicted by macroscale theory …

Dna Microarray Image Segmentation Using Active Contours Without Edges Method, Shenghua Ni

Doctoral Dissertations

The goal of this dissertation is to build a better segmentation method for DNA microarray image processing. Segmentation is a partitioning process used to separate a spot area from a non-spot area in DNA microarrays. It directly affects the accuracy of gene expression analysis in the data mining process that follows. A number of DNA microarray segmentation methods have been proposed in the area, but even modern segmentation methods seem to have accuracy problems. In this dissertation, I will present a segmentation method based on the Active Contours Without Edges (ACWE) algorithm and apply it to two types of DNA …

Analysis Of Conjugated Polymer Nanotubules Formed By Template Wetting Nanofabrication, Steven D. Bearden Jr.

Doctoral Dissertations

Semiconducting and optoelectric conjugated polymers have potential in micro and nano-electronic applications. Their widely tunable physical conformations and orientations make these polymers ideal material for engineering small scale devices. The polymers have been incorporated into several electronic devices including light-emitting diodes, solar cells, and field-effect transistors. Widespread adoption of these materials will not be a reality until the issues of poor device performance, short lifespans, and device degradation are resolved.

Nanostructures have been demonstrated to have improvements in molecular ordering and electronic transport. In the work presented here, tubular nanostructures of conjugated polymers fabricated by the template wetting nanofabrication process …