Engineering Commons^™

Computational Modeling Of Nanosensors Based On Graphene Nanoribbons Including Electron-Phonon Effects, Kirti Kant K. Paulla

Browse all Theses and Dissertations

We investigate detection mechanisms of real time sensors, based on ultra-thin (single and bi-atomic layer thick) and ultra-narrow (~1nm) graphene nanoribbons (GNRs), using first principle based theoretical methods. In the first part of this study we study the electronic and magnetic structures of bilayer graphene nanoribbons (BGNRs) beyond the conventional AA and AB stackings, by using density functional theory within both local density and generalized gradient approximations (LDA and GGA). Our results show that, irrespective of the method chosen, stacking arrangements other than the conventional ones are most stable, and result in significant modification of BGNRs characeristics. The most stable …

Carbon-Based Nanostructured Materials As Electrode In Lithium-Ion Batteries And Supercapacitors, Zhuo Yao

Browse all Theses and Dissertations

Carbon-based nancomposites attract much attention as electrode materials in electrochemical energy storage systems due to their low-cost, extraordinary high electrical and thermal conductivity, super high surface area etc. In this research, graphene nanosheets (GNS) and their nanocomposites with manganese oxides (GNS/MnOx) or silicon nanowires (GNS/SiNWs/CF) are studied for their applications in Li-ion batteries and supercapacitors. GNS powders are synthesized via a chemical oxidation of nature graphite followed by appropriate reduction process. GNS/MnOx composites are synthesized rendering MnOx nanoparticles embedded on the surfaces of GNS. SiNWs grown in carbon fibers are mechanically mixed with GNS powders. The impacts of the manganese …

Wing Damage Effect On Dragonfly's Aerodynamic Performance During Takeoff, Kuo Gai

Browse all Theses and Dissertations

Insect wing damage resulted from living environment or predation commonly happens in nature. This usually results in deterioration of insect's flight performance and as a consequence, the insect needs adjustment of flapping wings to compensate the effect from the wing loss. In this study, a dragonfly (Erythemis simpliciolis) with and without wing loss is chosen to study the change of aerodynamic performance of flapping wings. Three cases including flight with intact wings (IW), flight with one-sided forewing damage (OFD), and flight with double-side forewing damage (DFD) are determined. An integrated study using high-speed photogrammetry, three-dimensional surface reconstruction, and direct numerical …

Effect Of Process Variables On Sub-Melt Thermal Behavior And Solid-State Phase Transformations In Beam-Based Additive Manufacturing Of Ti-6al-4v, Heather N. Doak

Browse all Theses and Dissertations

The success of laser and electron beam-based fabrication processes for additive manufacture and repair applications requires the ability to control melt pool geometry while maintaining a consistent and desirable microstructure. Previous work has employed a process map approach to link melt pool geometry to solidification microstructure (grain-size and morphology) in beam-based fabrication of Ti-6Al-4V. The current work extends the approach to investigate the effects of process variables on solid-state phase transformations below the solidification temperature through Finite Element Modeling, the 3-D Rosenthal Solution, and experimentation. Process maps for solid-state microstructure could be used to help maintain consistent and reliable mechanical …

An Accuracy Improvement Method For Cricket Indoor Location System, Anall Vijaykumar Gandhi

Browse all Theses and Dissertations

The effective deployment of Automated Guided Vehicles (AGV) in indoor hostile environment demands high precision localization for navigation purposes. The cricket system, based on Time Difference of Arrival (TDoA) approach, provides precise localization. It calculates TDoA between radio and ultrasonic signal to estimate distance between two cricket motes. The position, in the referenced coordinate system, is estimated by multilateration using estimated distances from multiple motes. Therefore, the position accuracy depends on the distance estimation which in turn depends on the TDoA calculation. Ultrasonic transducer, a component of cricket mote hardware, has highly directive radiation pattern which affects ultrasonic signal detection. …

Design And Improve Energy Efficiency And Functionalities Of Electrical Wheelchairs, Dewei Guan

Browse all Theses and Dissertations

There are millions of people who have lost their abilities to walk and wheelchairs offer the ONLY opportunities for their interactions with people and environments outside their houses. These individuals are becoming more and more eager to adapt modern technologies on their wheelchairs to improve quality of social life and the life of freedom. However, most available electric wheelchairs, driven by traditional lead-acid batteries and gear motors, are heavy and bulky in design with low energy efficiency, limited travel radius, and scarce communication/navigation functionalities. This project is to design and prototype an electric wheelchair that is lighter, more flexible in …

An Experimental Investigation On The Control Of Tip Vortices From Wind Turbine Blade, Zhe Ning

Browse all Theses and Dissertations

Wind turbine dynamics, wake effects and environmental impacts have been identified the most significant research topics needed for wind resource characterization and wind power generation. Among these issues, tip vortices generated from the blade tip have been recognized as a substantial resource for the turbulent wake flow as well as the aerodynamic noise emission from a wind turbine. An experimental study is conducted to characterize the evolution of the tip vortices downstream of a well-designed horizontal axis wind turbine (HAWT) model. In addition to measuring dynamic wind loads (both aerodynamic forces and moments) and power output from the wind turbine …

Adaptive Semantic Annotation Of Entity And Concept Mentions In Text, Pablo N. Mendes

Browse all Theses and Dissertations

The recent years have seen an increase in interest for knowledge repositories that are useful across applications, in contrast to the creation of ad hoc or application-specific databases.

These knowledge repositories figure as a central provider of unambiguous identifiers and semantic relationships between entities. As such, these shared entity descriptions serve as a common vocabulary to exchange and organize information in different formats and for different purposes. Therefore, there has been remarkable interest in systems that are able to automatically tag textual documents with identifiers from shared knowledge repositories so that the content in those documents is described in a …

Spectrally Modulated Spectrally Encoded Framework Based Cognitive Radio In Mobile Environment, Xue Li

Browse all Theses and Dissertations

Radio spectrum has become a precious resource, and it has long been the dream of wireless communication engineers to maximize the utilization of the radio spectrum. Dynamic Spectrum Access (DSA) and Cognitive Radio (CR) have been considered promising to enhance the efficiency and utilization of the spectrum. Since some of the spectrum bands are occupied by primary users (PUs), the available spectrum for secondary users (SUs) are non-contiguous, and multi-carrier transmission technologies become the natural solution to occupy those non-contiguous bands. Non-contiguous multi-carrier based modulations, such as NC-OFDM (non-contiguous Orthogonal Frequency Division Multiplexing), NC-MC-CDMA (non-contiguous multi-carrier code division multiple access) …

Fundamental Understanding Of Blisk Analytical Response, Joseph A. Beck

Browse all Theses and Dissertations

This effort seeks to increase the reduced-order model fidelity for mistuned Integrally Bladed Rotor (IBR) and Dual Flow-path Integrally Bladed Rotor (DFIBR) response prediction by explicitly accounting for blade geometric and material property deviations. These methods are formulated in a component mode synthesis (CMS) framework utilizing secondary modal reductions in a cyclic symmetry format. The resulting reduced-order models (ROMs) capture perturbations to both blade natural frequencies and mode shapes resulting from geometric deviations. Furthermore, the secondary modal reductions and cyclic symmetry format offer significant computational savings over traditional component mode synthesis methods that give a further reduction in model size. …

Steps In The Development Of A Full Particle-In-Cell, Monte Carlo Simulation Of The Plasma In The Discharge Chamber Of An Ion Engine, Bryan James Penkal

Browse all Theses and Dissertations

The design and development of ion engines is a difficult and expensive process. In order to alleviate these costs and speed ion engine development, it is proposed to further develop a particle-in-cell (PIC), Monte-Carlo collision (MCC) model of an ion engine discharge chamber, which has previously been worked on by the Wright State Ion Engine Modeling Group. Performing detailed and accurate simulations of ion engines can lead to millions of dollars in savings in development costs.

In order to recognize these savings more work must be done on the present day models used to simulate ion engine performance. The work …

Selective Free-Standing Through-Wafer Porous Silicon Membrane (Sftpsm) For Integrated Meta-Material Devices, Bella Liu Yao

Browse all Theses and Dissertations

Meta-materials have attracted considerable attention due to their unique electromagnetic properties, such as negative permittivity (ε), negative magnetic permeability (μ), and negative index of refraction. These devices have shown broad flexibility in compact phase shifter, backward leaky-wave antenna, and high-directivity coupled-line coupler applications; however, integrated devices utilizing meta-material structures have not yet surfaced due to a lack of integration technology.

In this work, a novel concept of integrated meta-materials is presented, using free-standing porous silicon (PS) membranes of periodic magnetic wire arrays (PMWA). The free-standing PS membranes were fabricated on p-type silicon substrates through electrochemical anodization. Systematic investigations have been …

Solar-Powered Wireless Sensor Nodes With Dynamic Power Management For Indoor Use, Ethan Charles Humphrey

Browse all Theses and Dissertations

Indoor environment monitoring, such as medical monitoring and home automation, is achieved through wireless sensor networks that collect data through wireless sensor nodes. These nodes are typically powered by exhaustible power sources that could be difficult or impossible to maintain regularly. A solution to the need for frequent maintenance is to collect the solar power in the environment. This project shows how collecting the solar energy in the environment can extend the lifetime of a sensor node and limit the maintenance required. Along with charging the battery with a solar panel, a dynamic power management scheme can also be implemented. …

Evaluating The E-Consult Process For Diabetes Care Delivery At An Outpatient Care Clinic, Brian M. Zoll

Browse all Theses and Dissertations

The occurrence of one of the most common chronic conditions in the U.S., diabetes, is expected to rise 53% from 24 million cases in 2003 to 37 million cases in 2023. The U.S. Veterans Health Administration (VHA) is not immune to this. The VHA has experienced an $820 million increase spending on diabetes patients between 2000 and 2008. The VHA has tried to keep the growth of chronic care costs in check through improvements in patient access to care by expanding its network of community-based outpatient clinics. Other methods the VHA has used to curb chronic care spending costs are …

Effect Of A Graded Layer On The Plastic Dissipation During Mixed-Mode Fatigue Crack Growth On Ductile Bimaterial Interfaces, Craig M. Baudendistel

Browse all Theses and Dissertations

An energy-based theory for predicting mode I fatigue crack growth rates in ductile metals based on the total plastic dissipation ahead of a crack tip was proposed in 2003. Since then, this theory has been extended to layered material systems that typically include mixed-mode loading and elastic/plastic mismatch. Previous research by the author first extended this theory to include a graded layer (i.e., no step change in material properties across the crack plane) with which to more accurately model a crack interface between two materials with a mismatch in plastic properties only. In the current research, the graded layer model …

Analysis Of Human Echolocation Waveform For Radar Target Recognition, Kandarp Patel

Browse all Theses and Dissertations

Some blind humans have developed the remarkable capability of echolocation, similar to the type used by mammals such as the bat, dolphin and whale. This population of human has shown the ability to classify targets based on their location, size, shape and material in diverse environmental conditions simply by listening to the reflected echoes of tongue clicks generated by their mouth. To date, much of the research into human echolocation has been confined exclusively to behavioral science and the analysis is inconsistent with the approaches used in engineering. The waveforms used in current radar systems appear different to those typical …

Low Cost Open Source Modal Virtual Environment Interfaces Using Full Body Motion Tracking And Hand Gesture Recognition, Matthew J. Marangoni

Browse all Theses and Dissertations

Virtual environments provide insightful and meaningful ways to explore data sets through immersive experiences. One of the ways immersion is achieved is through natural interaction methods instead of only a keyboard and mouse. Intuitive tracking systems for natural interfaces suitable for such environments are often expensive. Recently however, devices such as gesture tracking gloves and skeletal tracking systems have emerged in the consumer market. This project integrates gestural interfaces into an open source virtual reality toolkit using consumer grade input devices and generates a set of tools to enable multimodal gestural interface creation. The AnthroTronix AcceleGlove is used to augment …

Investigation Of The Utility Of Center Frequency In Electroencephalographic Classification Of Cognitive Workload Transitions, Jones Melissa

Browse all Theses and Dissertations

Successful classification of human cognitive workload is a vital component in identifying and avoiding potential performance deficits resulting from operator work overload. Previous research suggests that electroencephalogram (EEG) derived features, including center frequency, provide a robust signal which may be used to obtain highly accurate workload classification. The purpose of this work is to investigate evidence of physiological hysteresis and determine if center frequency improves a classifier's ability to correctly identify workload level. Results confirmed that including spectral data creates the most robust feature sets, while center frequency across all bands is equally reliable for classifying workload in the case …

The Effects Of Text And Hybrid Graphic-Text Formats On Pilot Performance Using Flight Deck Data Communication Displays, Ricardo Daniel Muñoz Da Costa

Browse all Theses and Dissertations

Air Traffic has shown a steady increase since the institution of commercial aviation in the first quarter of the last century, and the use of the United States National Airspace System (NAS) is expected to increase by 45 percent more passengers by the year 2015 (Smith, 2004). The increasing demands of the NAS require preventive measures in order to preserve the safety of operations. NextGen is a transformative program expected to enhance the safety and effectiveness of NAS operations. One of the ways that it will achieve these goals is by improving air-ground communications.

In the current system, communications between …

Software-Defined Radio Based Blind Hierarchical Modulation Detector Via Second-Order Cyclostationary And Fourth-Order Cumulant, Yang Qu

Browse all Theses and Dissertations

Modulation detection is very important to many communication and electronic warfare applications. Recent developments in cognitive radio (CR) and dynamic spectrum access (DSA) network have also brought much attention to modulation detection of unknown radio frequency (RF) signals. It is well known that using second-order cyclostationary features, e.g., spectral correlation function (SCF) and spectral coherent function (SOF), BPSK modulation can be easily distinguished from higher order modulations such as QPSK and QAM modulations. However, QPSK and higher order modulations exhibit similar second-order cyclostationary features, thus these features cannot be employed to distinguish among higher order modulations. To classify higher order …

Non-Contact Probes For Characterization Of Thz Devices And Components, Mads Jacob Hedegaard Larsen

Browse all Theses and Dissertations

One of the challenges in developing semiconductor devices and integrated circuits for the terahertz (THz) region is their electrical characterization. The most common technology for their characterization is presently metal-to-metal, DC-coupled contact probes, which operate up to 750 GHz but are expensive and fragile.

/

In this Master's Thesis, we investigate through numerical simulation and analysis the electromagnetic properties of a novel, AC-coupled probe. The new probe couples radiation from the device or circuit-under-test (DUT) via polarization current, which is then transformed to conduction current in the probe and down-converted in frequency to baseband by an optically-pumped photomixer. Finite-element simulations …

The Effectiveness Of Pilot Response To Generate Concatenated Downlink Messages After Evaluation Of Hybrid Graphic-Text Clearances, Steven Brent Kiss

Browse all Theses and Dissertations

Data-Link Communication, or DataComm, is a digital text messaging system providing a means of communication between Air Traffic Control (ATC) and pilots. Current Pilot/ATC communication is via voice radio, but the number of ATC operators and voice channels are finite, which limits the number of aircraft voice transmission can accommodate. The number of aircraft within the National Airspace System (NAS) is expected to double between 2004 and 2025, and a transition from voice to DataComm is a necessity. DataComm is an integral part of the NAS and is implemented in incremental phases increasing its functions and capability. There are many …

A Semantic Situation Awareness Framework For Indoor Cyber-Physical Systems, Pratikkumar Desai

Browse all Theses and Dissertations

Recently, the domain of cyber-physical systems (CPSs) has emerged as a successor to the traditional embedded systems and the wireless sensor networks. The relatively new cyber-physical domain offers tight integration of control, communication and computation components to develop advanced web based application in various heterogeneous domains such as health care, disaster management, automation and environment monitoring. The applications of indoor CPSs include remote patient monitoring, smart home, etc. with focus on situation awareness via event identification from context information. The principal challenges associated with the development of situation awareness applications include uncertainty in contextual data, incomplete domain knowledge, interoperability between …

New Insights Into The Spinal Recurrent Inhibitory Pathway Normally And After Motoneuron Regeneration, Ahmed Zayed Obeidat

Browse all Theses and Dissertations

Despite more than seven decades of intensive research, uncertainty is the hallmark of spinal recurrent inhibition. The simplest possible structure that is formed between the a-motoneuron and its inhibitory interneurons has been the subject of long lasting scientific debate. To date, there is no consensus on the functional significance of this circuit. Even the simplest assumption of a negative feedback loop does not hold true. The current work used the technique of in vivo intracellular recording from the adult rat a-motoneurons to study the normal function and the plasticity after nerve injury and regeneration of this simple, yet intricate spinal …

Stability Of A Fuzzy Logic Based Piecewise Linear Hybrid System, Aaron W. Seyfried

Browse all Theses and Dissertations

Complex cyber-physical systems are difficult to model and control. However, humans are capable of accomplishing these tasks by constantly adapting and redefining the rules to control these complex systems. Fuzzy logic provides a means of encoding human inference into a control methodology. However, the fuzzy logic controllers are nonlinear and their stability is difficult to verify. Therefore, the widespread usefulness of fuzzy logic controllers is limited. It has been proven that fuzzy logic controllers can be implemented as piecewise linear switched controllers. It has also been shown that the piecewise linear system can be implemented as a hybrid system. Piecewise …

Integrity Monitoring For Multiple Errors In Vision Navigation Systems, Nicholas Allen Baine

Browse all Theses and Dissertations

In aviation applications, navigation integrity is paramount. Integrity of GPS systems is well established with set standards. Vision-based navigation systems have been found to be an adequate substitute for GPS when it is unavailable but are unlikely to be utilized until there is a measure for system integrity. Work has been done to detect the effect of a single measurement pair being corrupted with a bias; however, the measurement geometry varies greatly with the environment. The environment could be sparse in visual features to track, or the environment could be rich with features. With more features, there is a greater …

Bull's-Eye Structure With A Sub-Wavelength Circular Aperture, Masoud Zarepoor

Browse all Theses and Dissertations

This research focuses on improving the spatial resolution of terahertz (THz) imaging. Using a sub-wavelength aperture in a metal ground plane is the most common way to improve the spatial resolution, but a sub-wavelength aperture has low radiation transmission. To increase the radiation transmission of a sub-wavelength aperture, periodic circular grooves were put in the metal around the aperture. The sub-wavelength circular aperture and the periodic circular grooves around it are known as the bull's-eye structure. The bull's-eye structure shows high radiation transmission at its design frequency, and it also has sub-wavelength spatial resolution. This research designed the bull's-eye structure …

Structural-Acoustic Analysis And Optimization Of Embedded Exhaust-Washed Structures, Ryan N. Vogel

Browse all Theses and Dissertations

The configurations for high speed, low observable aircraft expose many critical areas on the structure to extreme environments of intense acoustic pressure loadings. When combined with primary structural and thermal loads, this effect can cause high cycle fatigue to aircraft skins and embedded exhaust system components. In past aircraft design methods, these vibro-acoustic loads have often been neglected based on their relatively small size compared to other thermal and structural loads and the difficulty in capturing their dynamic and frequency dependent responses. This approach is insufficient for effective advanced designs of complex aerospace structures, such as internal ducted exhaust systems …

Mining Diversified Decision Trees Across Multiple Datasets To Capture Similarities And Alignable Differences, Qian Han

Browse all Theses and Dissertations

This dissertation studies the problem of mining shared and alignable difference knowledge structures across multiple datasets/applications. Shared and alignable difference knowledge structures are important for identifying analogies between application domains and for forming new hypothesis in challenging research applications, and for assessing the degree and types of knowledge-level similarities and differences between application domains for use in learning transfer. Generally speaking, shared knowledge structures characterize underlying datasets and highlight conceptual-level structural similarities among the datasets. This dissertation studies the mining of shared decision trees, which are a special type of shared knowledge structures. We first consider building one shared decision …

Frequency Characterization Of Si, Sic, And Gan Mosfets Using Buck Converter In Ccm As An Application, Keshava Gopalakrishna

Browse all Theses and Dissertations

Present day applications using power electronic converters are focusing towards improving the speed, efficiency, and robustness. This led to the implementation of new devices in such converters where speed and efficiency are of concern. As silicon (Si) based power devices are approaching their operational performance limits with respect to speed, it is essential to analyze the properties of new devices, which are capable of replacing silicon based devices. Wide band-gap (WBG) semiconductor materials such as silicon carbide (SiC) and gallium nitride (GaN) are such materials, whose material properties show promising advantages for power electronic applications.

This thesis focuses on the …