Engineering Commons^™

A Study Of Minimum Element Syntheis Of A Two-Pole Rc Driving Point Impedance, William F. Carlson

Electrical and Computer Engineering ETDs

The point of view taken in this thesis is from the point of view of economy. A network containing resistors of values 1 ohm and 1 megohm may present problems of accuracy and element tolerance limits which are not aided by the fact that all elements may be increased or decreased by a constant multiplier without changing the shape of the network gain curve.

An Investigation Of The Effects Of Pozzolans On New Mexico Concrete Aggregates, Harry W. Montgomery

Civil Engineering ETDs

It was the purpose of this investigation to determine some of the effects a pozzolan has on Portland cement concrete when New Mexico aggregates are used. The specific items investigated were (1) to determine the effects of a pozzolan on the alkali aggregate expansion in concrete; (2) to show the effect on the compressive strength of concrete and the tensile strength of mortar briquettes when part of the Portland cement is replaced with a pozzolan; (3) to determine whether or not the “Mason Jar Expansion Test” would give reliable results; and (4) to determine whether or not an aggregate, with …

A Microwave Technique For Determining The Electronic Properties Of A Moving Plasma, Bernard Hayes

Electrical and Computer Engineering ETDs

A microwave interferometer technique which may be used as a diagnostic tool for determining the electronic properties of a moving plasma is described and analyzed. The plasma and microwaves are confined in a wave guide and longitudinal observation is employed. The complex reflection coefficient determined from resultant standing-wave pattern provides the means for obtaining the complex dielectric constant, conductivity, electron concentration and collision frequency of electrons with molecules in the plasma. The plasma used for these experiments is the reaction products of a gas detonation.

Functional And Economic Considerations Of An Electrical Line Feeding Large Concentration Loads, Seth O. Lewis

Electrical and Computer Engineering ETDs

This paper discusses the considerations required for selecting particular characteristics of [transmission lines] and presents an original method of obtaining the most economical solution. A typical problem at the Public Service Company of New Mexico is solved to illustrate the usefulness of this method.

Design And Use Of A High Power Laser For Plasma Generation Studies., Philip N. Mace

Electrical and Computer Engineering ETDs

The advent of high power lasers to the technological scene has introduced the possibility of creating new effects utilizing the interaction of this high intensity light with matter. C. M. Fowler and D. B. Thomson of the Los Alamos Scientific Laboratory suggested in 1963 the possibility of using a high power laser to pre-ionize and heat a target material to be contained in an explosively driven theta pinch machine. There had been calculations performed by John Dawson, Princeton University, and A. Engel­hardt, Westinghouse Research Laboratories, which indicated that such an approach was theoretically feasible. The laser powers required, however, were …

Determination Of Required Component Reliability From System Reliability Requirements, Arthur M. Breipohl

Electrical and Computer Engineering ETDs

No abstract provided.

Analysis And Synthesis Of A Current Regulator System, William P. Aiello

Electrical and Computer Engineering ETDs

This report describes a practical current regulator system used to accurately control the current delivered by a 500 kilowatt motor-generator unit. The generator supplies its current of 2000 amperes at 250 volts to a large water-cooled air-core solenoid used by LASL Group P-7 for experiments in connection with the Sherwood program.

After a general discussion of the system specifications and the basic regulator loop, each of the components in the basic regulator loop is described in considerable detail. The description, in most cases, is mathematical in nature although many circuit diagrams are included with brief descriptions when necessary for proper …

A Theoretical And Experimental Analysis Of A Hall Generator, David L. Endsley

Electrical and Computer Engineering ETDs

This is a study of the behavior of a "Hall Effect" device by theoretical and experimental methods to determine if its operation may be predicated for various magnetic fields, output resistances, operating temperatures, input resistances, input control currents, and device construction.

This information should prove useful in the design of a circuit where the use of a "Hall Effect" device is contemplated.

An Experimental Method For Three-Dimensional Dynamic Stress Analysis, Larry E. Williams

Mechanical Engineering ETDs

It is the purpose of this thesis to present an evaluation of a method of experimental dynamic stress analysis utilizing electrical resistance strain gauges located internally. If it can be shown that the proposed experimental procedure is valid, then the transient stress phenomena could be continuously recorded from an internal, integral strain gauge placed at any desired location and in any orientation in a suitable model.

A Reactor Transfer Function Analyzer, Earl O. Swickard Jr

Electrical and Computer Engineering ETDs

This thesis describes the design of a device for determining the transfer function of a nuclear reactor. A number of different methods have been successfully employed for this purpose but were, in some cases, tedious or required the use of delicately balanced components. The equipment described computes values which are simply related to the values of the transfer function and is operable over a frequency range of about 1000:1. The time required to obtain data for one frequency point is two minutes or less. No precise adjustment is necessary during operation.

A Study Of The Application Of Digital Computers For Controlling Vehicle Traffic At A Signalized Intersection, John V. Wait

Civil Engineering ETDs

This study outlines a method whereby a small, specialized "on-line" digital computer could be used to control urban vehicle traffic at a signalized intersection. In the basic system proposed, the computer uses as input data a "history" of the instantaneous vehicle flow, in terms of number of cars arriving and arrival time. The data are stored for a period of 240 seconds in a magnetic drum memory. Once each 1/2 second, the computer examines the arrival pattern of cars and compares the delay being imposed on the waiting cars versus the delay which would be imposed on the cars on …

Transient Response Of A Mass Mounted On A Nonlinear, Strain-Rate Sensitive Element, Wiley T. Holmes

Electrical and Computer Engineering ETDs

The object of the present transient movement study was not that of investigation of response of a nonlinear system alone, but was projected to include the effect of a strain-rate sensitive, nonlinear restoring element.

Shear Strength Of Simply Supported Prestressed Concrete Beams Having Web Enforcement, Randolph E. Holt

Civil Engineering ETDs

The problem of shear strength in pre-stressed concrete beams is analogous to that in ordinary reinforced concrete, since there is very little difference between reinforced concrete and pre-stressed concrete beams in the cracked condition. Until very recently, the knowledge of the shear strength of reinforced concrete members and pre-stressed concrete members was wholly statistical. Developments in the last few years have advanced it to the semi-empirical level, ^5,6,7 but our knowledge of the effect that shear has on the ultimate strength of reinforced and pre-stressed concrete members is still far from complete.

The Effect Of Capillary Bleeding On The Compressive Strength Of Concrete, James L. Cramer

Civil Engineering ETDs

The purpose of this study was to determine the effect that bleeding has upon the compressive strength of concrete. Keeping in mind that the compressive strength of a concrete depends highly upon the water, cement ratio, it was reasonable to expect that the changing of the water content of the fresh concrete by bleeding would have a definite effect on the final compressive strength. While tests upon tests and studies upon studies have been made of cement and concrete, few, if any, have been concerned with this problem.

Effect Of Strain Rate And Temperature On The Stress-Strain Characteristics Of Plastics, Walter W. Joseph

Mechanical Engineering ETDs

The stress-strain characteristics of a material are a measure of the energy absorption characteristics of that material. Generally, plastics show permanent deformation at low values of strain but will withstand a large amount of strain before reaching their ultimate strength. Therefore, in effect, plastics are good energy absorbing materials. If the packaging designer could predict the effect of variation in strain rate and temperature on the stress-strain characteristics of a given plastic, his designs would be more reliable.

Transistor Distributed Amplifier, Bill J. Harper

Electrical and Computer Engineering ETDs

For the purpose of this report, it is assumed that the behavior of the transistor can be predicted from the study of a suitable circuit model or equivalent circuit of the transistor. It is further assumed that, except for the intrinsic short-circuit current gain, the circuit parameters of he transistor are independent of frequency and temperature. The primary interest in the study of transistor distributed amplifier here is the amplitude of the voltage gain in the amplification of video frequencies. Somewhat less detailed studies are made of the distributed amplifier in band-pass applications.

An Amplitude-Stable, Fixed-Frequency Transistorized Power Supply, Bobby O. Allen

Electrical and Computer Engineering ETDs

The subject of this paper is the design of an ultrastable, fixed- frequency power supply capable of maintaining a high degree of amplitude stability over a wide range of resistive load values. The requirement for such a power supply originally arose in connection with the design of a particular piece of test equipment required by Sandia Corporation. No attempt will be made in this paper to justify or explain the necessity for the specified design criteria outlined in the following paragraphs other than to adequately define the design criteria.

Safe Thermal Operation Of Power Transistors Under Pulsed Excitation, George R. Swain

Electrical and Computer Engineering ETDs

One desires to find the relationship between thermal stability and such factors as temperature within the transistor, power dissipation in the transistor junctions, collector saturation current, and thermal resistance. In the approach set forth in this paper, the theory of solid state heat flow is applied to a simplified thermal model of a power transistor.

A Design Of Los Esteros Flood Control Dam, Constantine G. Hadjidakis

Civil Engineering ETDs

This thesis covers a preliminary design of the Los Esteros Dam based on limited subsurface investigations and laboratory testing. This earth-filled dam will be 222 feet high and will have a top width of 20 feet.

A Transient Thermal Analog Of Nuclear Reactors, James R. Hume

Nuclear Engineering ETDs

The nuclear reactor is presently receiving considerable attention as a possible source of energy for stationary power plants and propulsion systems. This has stimulated interest in many engineering problems which become very significant in reactor design work. The response of the reactor core heat transfer system to changes in power generation is one of these problems.

The Design, Construction And Testing Of An Electrical, Transient Heat Flow Analyser, Bruce Wilcox

Electrical and Computer Engineering ETDs

The purpose of this investigation was (a) to design and build an analog which would produce the solution to a simplified yet typical transient aerodynamic heating problem, (b) to obtain the solution using the analog and to check the accuracy of the solution by mathematical computation, and (c) to code a more involved aerodynamic analog.

Comparison Of Observed And Calculated Near-Vertical Radar Ground Return Intensities And Fading Spectra, James Arlin Cooper

Electrical and Computer Engineering ETDs

The study of ground-to-air terrain return is necessary in order to understand the functioning of radar altimeters.

Radar return at vertical incidence can be considered to be composed of two components. One, whic his returned by a mirror-like action, is called the specular component. The other, termed scatter, is due to diffuse rerediation from individual scatterers on the ground.

In recent work on return from angles near vertical, more attention has been given to the scatter component than many had previously assumed necessary.

Procedure for Gathering Data:

Two pulse radar units were used, one having a frequency of 3.8 KMC, …

The Design Of A Solar Powered Air Conditioning System For An Albuquerque Office Building, Kuo S. Lee

Mechanical Engineering ETDs

The purpose of this investigation is to predict the performance of a solar powered jet refrigeration system for summer air conditioning, to measure the performance of the solar heat collector at the Bridgers and Paxton building in Albuquerque, and to design a Freon-12 ejector and generator for collection to that collector.

The Design, Construction And Investigation Of A Water Gravity Wave Analog Of Two-Dimensional Compression Waves In Gases, John H. Tenbrink

Mechanical Engineering ETDs

The purpose of this investigation was to design equipment for investigating and demonstrating supersonic air flow using water; to fabricate, assemble and calibrate this equipment; and to obtain and evaluate data on the validity of the supersonic flow analogy and the range of the equipment for classroom use.

Analysis Of Cushioned Impact By Wave Propagation Techniques, Lowell P. Martin

Mechanical Engineering ETDs

A typical problem of wave propagation which has received substantial attention concerns the longitudinal vibrations of a long, slender, uniform elastic rod after it has been dropped on one end.

The purpose of this investigation was to extend the problem to include the effect of cushioning material attached to the impacting end of a rod similar to that described above; and to conduct experiments designed to verify the analysis. This study is essentially the first step toward the analysis, by wave propagation methods, of many practical impact problems encountered in military airborne operations, experimental rocket programs, and the packaging industry.

Design Of An Experiment To Separate Specular And Scattered Radar Returns, Robert B. Glascock

Electrical and Computer Engineering ETDs

This paper describes the design of a radar experiment that will be conducted by the U.S. Naval Research Laboratory at Washington, D.C. The proposed experiment and the background of the problem are discussed, as well as the theoretical background, experimental background, and other design considerations are discussed in later sections.

A Study Of The Reset Cycle Of A Half-Wave Self-Saturable Magnetic Amplifier, William W. Lee

Electrical and Computer Engineering ETDs

It was the purpose of this study (1) to investigate the reset cycle of a half-wave self-saturable magnetic amplifier by graphical analysis of the irregular voltage functions appearing across the gate winding during reset; and (2) to determine if possible from this analysis a more satisfactory design method than those now available. Conditions of constant current reset were employed and the core material used had a nearly rectangular hysteresis loop. Resistive loads only are considered.

Utilization Of The Relationship Between The Complex Immittance And The Indicial Immittance Functions For The Synthesis Of Two Terminal Networks, Julian T. Lefler

Electrical and Computer Engineering ETDs

It was the purpose of this study (1) to develop a new method of network synthesis from a specified complex immittance function; and (2) to demonstrate the application of the method by means of its use in the solution of representative synthesis problems. This work deals only with the synthesis of two terminal networks containing linear, passive, lumped-constant elements, from given rational immittance functions of the complex frequency variable.

Not considered part of this work are (1) the development of the immittance function from frequency-response specifications (the approximation problem); or (2) the treatment of active, non-linear, or time varying network …

The Use Of Electrical Resistance Strain Elements In Three-Dimensional Stress Analysis, Robert I. Brasier

Electrical and Computer Engineering ETDs

The purpose of this thesis is to present a new method of experimental stress analysis and to give the solution to a problem which has been handled by this method.

A Study Of A Complementary Symmetrical Power Switching Circuit, Glenn S. Mills

Electrical and Computer Engineering ETDs

This paper contains an analysis of a symmetrical, complementary, power switching circuit employing complementary power transistors. A DC analysis is made for the bistable states. Also described is a voltage regulation and bias circuit which improves stability and contributes to the protection of the transistors. The problem of switching transients is investigated and empirical results presented to support theoretical considerations. A new triggered method is proposed to utilize the bilateral characteristics of a transistor. Applications of the circuit are suggested for controlled-frequency and self-triggering modes of operation. A method and analysis for self-triggering is presented. The advantages of this power …