Engineering Commons^™

Test 2009a: New Holland T9.505, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2008a: New Holland T9.390, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2011a: New Holland T9.670, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2013a: New Holland Workmaster 65, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2014a: Case Ih Farmall 75a, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

An Integrated Approach For Phytate Degradation And Recovery Of Myo-Inositol And Phosphate As Valued-Added Products From The By-Products Of Corn Ethanol Industry, Jun Dang

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

An integrated process was developed to hydrolyze the phytates in light steep water (LSW) and to simultaneously isolate inorganic phosphate (Pi) and myo-inositol products. The proposed integrated process is helpful in resolving the environmental and nutritional concerns in the use of corn gluten feed (CGF) in the animal diets. This process comprised of partial and total hydrolysis of LSW and intermediate anion exchange separation technique. The phytates in LSW were initially degraded to negatively charged myo-inositol phosphates (InsP₂ - InsP₅). The optimized experimental parameters for the partial hydrolysis of LSW were determined to be 2 h hydrolysis …

Effects Of Warm-Mix Asphalt Additives On Asphalt Mixture Characteristics And Pavement Performance, Jun Zhang

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The primary objective of this research is to evaluate the feasibility of several WMA mixtures as potential asphalt paving mixtures for Nebraska pavements. To that end, three well-known WMA additives (i.e., Sasobit, Evotherm, and Advera synthetic zeolite) were evaluated. For a more realistic evaluation of the WMA approaches, trial pavement sections of the WMA mixtures and their HMA counterparts were implemented in Antelope County, Nebraska. More than one ton of field-mixed loose mixtures were collected at the time of paving and were transported to the NDOR and UNL laboratories to conduct comprehensive laboratory evaluations and pavement performance predictions of the …

Testing Embedded System Applications, Tingting Yu

School of Computing: Dissertations, Theses, and Student Research

Embedded systems are becoming increasingly ubiquitous, controlling a wide variety of popular and safety-critical devices. Testing is the most commonly used method for validating software systems, and effective testing techniques could be helpful for improving the dependability of these systems. However, there are challenges involved in developing such techniques. Embedded systems consist of layers of software – application layers utilize services provided by underlying system service and hardware support layers. A typical embedded application consists of multiple user tasks. Interactions between application layers and lower layers, and interactions between the various user tasks that are initiated by the application layer, …

Modeling Heat Transfer During Cooling Of Ready-To-Eat Meat And Poultry Products Using Three-Dimensional Finite Element Analysis And Web-Based Simulation, Jihan F. Cepeda Jimenez

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

The meat industry is required to comply with processing performance standards for preventing the growth of foodborne pathogens in products. These performance standards, established by the United States Department of Agriculture - Food Safety and Inspection Service (USDA-FSIS) require a reduction of Salmonella spp (lethality standard) and limit the growth of sporeforming bacteria (stabilization standard) in certain processed meat products. In general, strategies used to comply with these standards are associated with thermal processing. Meat processors have difficulties complying with these performance standards. Moreover, thermal processing deviations are an issue in the meat industry that generate uncertainty regarding the safety …

Soil Behavior Under Blast Loading, Jichong An

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Understanding the behavior of soil under blast loading is very important to engineers in mining, tunneling, and military construction. Due to the very complex structure of a soil mass it is very difficult to describe its constitutive relation, especially when it has different water contents and it is under blast loading conditions. New protective system designs subjected to blast loading need to be proved its validation prior to predict effect of explosive before implementation. Full-scale, buried explosive tests are costly. Finite element simulations play a significant role in the design of protective systems, for example a bottom platform of lightweight …

A Generalized Non-Parametric Approach For Uncertainty Evaluation In Travel Time Prediction Models, Bhaven Naik

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

A core component within Advanced Traveler Information Systems is travel time information because it is easily understood and perceived by travelers. However, the suggested travel time information should be based not only on historical and real-time conditions, but also on forecasted or “unknown” future conditions.

Existing research has focused primarily on developing models that forecast point estimates of the mean travel time that are in close comparison to their respective field values. There has been limited research on any insight into the reliability or uncertainty margin that exists around the forecasted point estimate. As well, these researches have a limitation …

Embedded Radio Frequency Identification Device License Plates For Roadside Use In Nebraska, Dwight L. Mosby Jr.

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The transportation industry has many stakeholders with different needs that work with advanced technologies. Radio Frequency Identification (RFID) is an emerging technology that is used to track inventory and it holds promise for the transportation industry. This research identifies how to evaluate transportation stakeholder requirements for RFID technologies using a tool described as the House of Quality (HOQ). This research investigates RFID’s ability to work in license plates and may provide infrastructure to support identifying RFID enabled commercial vehicles. This research considers variables that affect the performance of a RFID License Plate System that will use a scanner located at …

Evaluating Obsolete Inventory Policies In A Hospital's Supply Chain, Maurice D. Cavitt

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Numerous organizations are currently facing inventory management problems including distributing inventory on time and maintaining the appropriate inventory level to satisfy the end user. Organizations understand the importance of inventory accuracy as any error will increase the purchasing and holding costs affecting investment decisions. Lack of information about effective measures that will allow management to make important business decisions motivated this research to identify a decision criterion for warehouse management. A feasible solution of calculating the carrying cost ratio from purchasing and holding cost is the main objective of this thesis. The carrying cost ratio will allow managers to make …

Evaluation Of Optimization Algorithms For Improvement Of A Transportation Companies (In-House) Vehicle Routing System, Jian Han

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Vehicle routing problem (VRP) is the main issue of the transportation. It is becoming more and more popular. Trucking companies play an important role in the transportation industry. Most trucking companies are developing their own software to make profit. Often, the software is used for routing optimization models to minimize cost because the first work is organized over the road.

Linear Programming and saving heuristics are traditional algorithms for solving the vehicle routing problems. However, none of the companies want to make a decision of routing by calculating with mathematics models in their companies. So the vehicle routing software is …

Development Of An Integrated Soil Properties Mapping System, Rajveer S. Dhillon

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

One of the main goals of precision agriculture (PA) is to define spatial variability in soil properties within an agricultural field to make decisions that can maximize profitability and reduce negative environmental impact. Various soil sensor systems have been developed over the years to map soil properties on-the-go. In this study, an Integrated Soil Mapping System (ISMS) was developed to predict soil water content, soil organic matter, and soil mechanical resistance on-the-go using a capacitance moisture sensor, an optical sensor, and a load cell sensor respectively. These sensors were mounted on the ISMS for acquiring three different data layers at …

Innovating Continuous Review Policies With Rfid, Angela Garza

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Inventory accuracy is critical for NASA astronauts in space. In 2004, astronauts onboard the International Space Station (ISS) nearly had to de-man their outpost due to the fact the replenishment of consumables were uncertain. Automated Identification Technologies (AITs) such as Radio Frequency Identification (RFID) can be utilized to minimize the occurrence of situations like this one. RFID has been used to aid inventory management systems by providing real time availability of the item information including location and status. The benefit of RFID over barcodes is immense as it allows users to employ continuous review models. Barcodes are only capable of …

Design Of Assembly Lines With The Concurrent Consideration Of Productivity And Upper Extremity Musculoskeletal Disorders Using Linear Models, Zhan Xu

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

The productivity of assembly lines is considerably affected by the health condition of assembly workers, and work-related musculoskeletal disorders (WMSDs) are common occupational diseases among assembly workers due to repetitive motions or heavy working loads. The conventional approaches to decreasing WMSD risks in the assembly lines include slowing the work-pace or applying job rotations. These adjustments usually focus on individual assembly workers at the station level but not the work allocation among the workers at the whole assembly line level, and thus may decrease the line productivity. To avoid these negative effects, some research started considering ergonomic characteristics at the …

Cross-Layer Optimized Wireless Multimedia Networking, Dalei Wu

Department of Computer Electronics and Engineering: Dissertations, Theses, and Student Research

Multimedia communications, especially real-time video communications, is expected to be the major application of the next-generation wireless networks. However, bringing delay-sensitive and loss-tolerant multimedia services based on the current wireless Internet is a very challenging task. In this dissertation, we address cross-layer optimized wireless multimedia networking from both theoretical and practical perspectives. In the first part of the dissertation, we propose cross-layer optimization frameworks for real-time video communications over wireless networks, where the expected received video quality is adopted as the objective function. With the user-centric objective function, we first study content-aware video communications in single-hop wireless networks by exploring …

A Comprehensive Analysis Of Lte Physical Layer, Fahimeh Rezaei

Department of Computer Electronics and Engineering: Dissertations, Theses, and Student Research

The 3rd Generation Partnership Project (3GPP) introduced Long Term Evolution (LTE) as the 3rd generation of mobile communication standards. LTE Release 8 describes a mobile communication standard which supports up to 300 Mbps of data transmission in downlink using the OFDM scheme as well as up to 75 Mbps throughput for uplink using the SC-FDMA modulation. In this thesis, an in-depth study of LTE performance based on Release 8 is conducted for uplink and downlink under different scenarios. The main objective of this study is to investigate a comprehensive analysis of physical layer throughput of LTE Release8 based on standard …

A Predictive Modeling For Water Consumption And Wastewater Flow Management For A Food Processing Manufacturer, Jairo A. De Jesus

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

The City of Cumming, GA, issues special permits for industrial users of sewer services, who meet one or more criteria of discharge regulations. The criteria includes discharge of 25,000 gallons per day or more of processed wastewater, the presence for the potential to inhibit the Advanced Water Reclamation Facility (AWRF) treatment processes, the potential to cause AWRF’s bio-solids to be contaminated, and other regulations. The Food Processing Manufacturer in this study is a meat processing facility (processes pork cooked sausage) and its operation and associated wastewater treatment plant meets at least one of the criteria requiring a special sewer service …

The Green, Blue And Grey Water Footprint Of Farm Animals And Animal Products. Volume 1: Main Report, Mesfin Mekonnen, Arjen Y. Hoekstra

Daugherty Water for Food Global Institute: Faculty Publications

The projected increase in the production and consumption of animal products is likely to put further pressure on the globe’s freshwater resources. The size and characteristics of the water footprint vary across animal types and production systems. The current study provides a comprehensive account of the global green, blue and grey water footprints of different sorts of farm animals and animal products, distinguishing between different production systems and considering the conditions in all countries of the world separately. The following animal categories were considered: beef cattle, dairy cattle, pig, sheep, goat, broiler chicken, layer chicken and horses. The study shows …

The Green, Blue And Grey Water Footprint Of Farm Animals And Animal Products. Volume 2: Appendices, Mesfin Mekonnen, Arjen Y. Hoekstra

Daugherty Water for Food Global Institute: Faculty Publications

Contents

Appendix I: Feed conversion efficiencies – in kg of feed (dry mass) per kg of output – per animal category and region

Appendix II: Estimated consumption of feed per animal category and world region (10³ ton dry mass/yr)

Appendix III. Estimated consumption of feed per production system and world region (10³ ton dry mass/yr)

Appendix IV. Drinking and service water footprint per animal

Appendix V. Water footprint of animals and animal products (m³/ton). Period 1996-2005

Acuta Enews December 2010, Vol 39, No. 12

ACUTA Newsletters

ln This lssue

Security Snapshot: Notre Dame

From the president..........Matt Arthur, Washington Univ. in St. Louis, ACUTA President

Tech Talk: Network of the People, by the People, and........... Kevin Tanzillo, Dux PR

That Smarts!

Establish Yourself on the ACUTA Community

ACUTA Webinar: Employer-Provided Cell Phone Policies

Nominate Now for 201 1 ACUTA Ruth A. Michalecki Leadership Award

Learn More about Financing lT, Network Management..... and More from Your Desktop

Board Report............ George Denbow, Univ. of Texas, ACUTA Secretary/Treasurer

Washington Update Newsletter

Professional Organizations Help Fill the Gaps Jeffry Handal, LSU

lnfo Links ............ Rondy Hayes, Univ. of Northern lowa

Thanks …

Anomalous Loss Of Toughness Of Work Toughened Polycarbonate, Shawn E. Meagher

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

Glassy polymers such as polycarbonate (PC) can be toughened through compressive plastic deformation. The increase in toughness is substantial, showing as much as a fifteen fold increase in the amount of dissipated energy during failure for samples compressed to 50% plastic strain. This toughness increase can be reversed through thermal aging at temperatures below the glass transition temperature (T_g = 147°C).

The combined effect of plastic compression and thermal aging has been studied using Charpy, Single Edge Notch Bending (SENB), and Compact Tension (CT) tests. The tests mapped the response of samples cut along different orientations relative to the …

Development And Characterization Of Shock Tubes For Laboratory Scale Blast Wave Simulation, Aaron D. Holmberg

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

The prevalence of traumatic brain injury (TBI) in American soldiers exposed to a blast wave has created an urgent need to better understand the effects of blast wave insult to the head. Developing techniques that can experimentally simulate well controlled blast waves in a laboratory environment is a critical component of the research efforts towards this goal. For this work, a 4-in. cylindrical uniform shock tube and a nonuniform shock tube combining a 4-in. cylindrical gas driver with a 9-in. square driven section have been developed. The hosting laboratory, gas handling system, multichannel data acquisition systems, and the related network …

Evaluation Of Periodontal Scaling Task And Development Of Force–Endurance Models For Simulated Scaling Task, Vettrivel Gnaneswaran

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Force exertion is critical in grasping and holding activities at sub-maximal levels. Exertion misjudgments lead to musculoskeletal disorders (MSDs) impairing performance and productivity. Published literatures on grasping have addressed the force balance and endurance issues for non-prehensile movements of hand. However, little information is available on the force exerted in precision gripping employed in health care. Professionals, especially dental hygienists, when treating patients adopt awkward postures for extended period leading to cumulative trauma. Literatures on cumulative trauma have identified force exertion to be an important risk factor. Lack of information on fatigue with precision gripping motivated this research to establish …

Investigating The Use Of A New Universal Breakaway Steel Post -- Phase Iii, Dean L. Sicking, Ronald K. Faller, Robert W. Bielenberg, Karla A. Lechtenberg, Jennifer D. Schmidt

Nebraska Department of Transportation: Research Reports

No abstract provided.

Information Quality On The World Wide Web: A User Perspective, Jaikrit Kandari

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Information Quality has emerged as an important measure for the success of Information Systems. At the same time the World Wide Web has established itself as the key infrastructure for information administration, exchange, and publication. Users are getting information from the web at the click of a button however they must filter sub-standard information before they can use quality content. Researchers have aimed to address this problem by suggesting various information quality frameworks. Research till date has seen twenty important Information Quality (IQ) frameworks emerge. These models though varied in their approach and application share a number of characteristics regarding …

Generalized Ellipsometry On Sculptured Thin Films Made By Glancing Angle Deposition, Daniel Schmidt

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

In this thesis, physical properties of highly optically and magnetically anisotropic metal sculptured thin films made by glancing angle deposition are presented. Predominantly, the determination of optical and magneto-optical properties with spectroscopic generalized Mueller matrix ellipsometry and homogenization approaches is discussed. Nomenclatures are proposed to unambiguously identify the sculptured thin film geometry.

Generalized ellipsometry, a non-destructive optical characterization technique, is employed to determine geometrical structure and anisotropic dielectric properties of highly spatially coherent three-dimensionally nanostructured thin films in the spectral range from 400 to 1700 nm. The analysis of metal slanted columnar thin films (F1-STFs) deposited at glancing angle ( …

Hybrid Nanomanufacturing Process For High-Rate Polymer Nanofiber Production, Chad T. Peterson

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

Nanotechnology and nanomaterials have the potential to revolutionize existing and create entirely new industries. Unique physical, mechanical, chemical, and biological properties of nanomaterials have been extensively documented in the last two decades. However, most nanomaterials are discontinuous in nature, creating problems with their processing and manipulation into devices and raising health concerns. Continuous nanofibers represent an emerging class of nanomaterials with critical advantages to applications. Continuous nanofibers are readily produced by electrospinning process comprising spinning polymer solutions in high electric fields. Electrospinning is a very economic top-down nanomanufacturing process that has been used to produce ultrafine continuous nanofibers from several …