Engineering Commons^™

Evaluation Of A Rhodamine-Wt Dye/Glycerin Mixture As A Tracer For Testing Direct Injection Systems For Agricultural Sprayers, Joe D. Luck, Scott A. Shearer, Brian D. Luck, Fred A. Payne

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The purpose of this study was to provide valuable insight regarding the use of Rhodamine WT (red) dye as a tracer for evaluating injected concentrations. More specifically, the effects of mixing the dye with glycerin to simulate the viscosity of a pesticide (e.g., glyphosate) or injecting the dye/glycerin mixture into deionized (DI) versus tap water on developing appropriate calibration equations were evaluated. Test results indicated that mixing the dye in a solution of glycerin and DI water significantly affected absorbance measurements compared to the dye mixed solely in DI water. The error in estimating absorbance was 7.4% between the two …

Swat: Model Use, Calibration, And Validation, Jeffrey G. Arnold, Daniel N. Moriasi, Philip W. Gassman, Karim C. Abbaspour, Michael J. White, Raghavan Srinivasan, Chinnasamy Santhi, Daren Harmel, Ann Van Griensven, Michael W. Van Liew, Narayanan Kannan, Manoj K. Jha

Department of Agricultural and Biological Systems Engineering: Faculty Publications

SWAT (Soil and Water Assessment Tool) is a comprehensive, semi-distributed river basin model that requires a large number of input parameters, which complicates model parameterization and calibration. Several calibration techniques have been developed for SWAT, including manual calibration procedures and automated procedures using the shuffled complex evolution method and other common methods. In addition, SWAT-CUP was recently developed and provides a decision-making framework that incorporates a semi-automated approach (SUFI2) using both manual and automated calibration and incorporating sensitivity and uncertainty analysis. In SWAT-CUP, users can manually adjust parameters and ranges iteratively between autocalibration runs. Parameter sensitivity analysis helps focus the …

Soil Water Extraction Patterns And Crop, Irrigation, And Evapotranspiration Water Use Efficiency Of Maize Under Full And Limited Irrigation And Rainfed Settings, Koffi Djaman, Suat Irmak

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The effects of full and limited irrigation and rainfed maize production practices on soil water extraction and water use efficiencies were investigated in 2009 and 2010 under center-pivot irrigation near Clay Center, Nebraska. Four irrigation regimes (fully irrigated treatment (FIT), 75% FIT, 60% FIT, and 50% FIT) and a rainfed treatment were implemented. The crop water use efficiency (CWUE, or crop water productivity), irrigation water use efficiency (IWUE), and evapotranspiration water use efficiency (ETWUE) were used to evaluate the water productivity performance of each

treatment. The seasonal rainfall amounts in 2009 and 2010, respectively, were 426 mm (18% below normal) …

Large-Scale On-Farm Implementation Of Soil Moisture-Based Irrigation Management Strategies For Increasing Maize Water Productivity, Suat Irmak, Michael J. Burgert, Haishun Yang, Kenneth G. Cassman, Daniel T. Walters, William R. Rathje, Jose O. Payero, Patricio Grassini, Mark S. Kuzila, Kelly J. Brunkhorst, Dean E. Eisenhauer, William L. Kranz, Brandy Vandewalle, Jennifer M. Rees, Gary L. Zoubek, Charles A. Shapiro, Gregory J. Teichmeier

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Irrigated maize is produced on about 3.5 Mha in the U.S. Great Plains and western Corn Belt. Most irrigation water comes from groundwater. Persistent drought and increased competition for water resources threaten long-term viability of groundwater resources, which motivated our research to develop strategies to increase water productivity without noticeable reduction in maize yield. Results from previous research at the University of Nebraska-Lincoln (UNL) experiment stations in 2005 and 2006 found that it was possible to substantially reduce irrigation amounts and increase irrigation water use efficiency (IWUE) and crop water use efficiency (CWUE) (or crop water productivity) with little or …

Evaporative Losses From A Common Reed-Dominated Peachleaf Willow And Cottonwood Riparian Plant Community, Isa Kabenge, Suat Irmak

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Our study is one of the first to integrate and apply within-canopy radiation physics parameters and scaling-up leaf-level stomatal resistace (r_L) to canopy resistance (r_c) approach to quantify hourly transpiration (TRP) rates of individual riparian plant species—common reed (Phragmites australis), peachleaf willow (Salix amygdaloides), and cottonwood (Populus deltoides)— in a mixed riparian plant community in the Platte River Basin in central Nebraska. Two experimental years (2009 and 2010) were contrasted by warmer air temperature and presence of flood water in 2010. The seasonal average r_c values for common reed, …

P95. In Vivo Loads In The Cervical Spine: A Preliminary Investigation Using A Force-Sensing Implant, Rebecca A. Wachs, Mary Beth M. Grabowsky, Joseph C. Glennon, Eric H. Ledet

Department of Agricultural and Biological Systems Engineering: Faculty Publications

BACKGROUND CONTEXT: It is estimated that up to 80% of the general population will experience at least one significant bout of low back pain in their lifetime. The leading known cause of low back pain is degenerative disc disease (DDD). Many established risk factors for low back pain and DDD are mechanical in nature and are often related to occupational activities, such as poor posture and frequent/heavy lifting. Altered mechanical loading in the spine has been shown to be a potential stimulus for disc degeneration. However, a link between occupational/environmental factors and intervertebral loading has never been demonstrated in vivo. …

Curcumin-Loaded Magnetic Nanoparticles For Breast Cancer Therapeutics And Imaging Applications, Murali M. Yallapu, Shadi F. Othman, Evan T. Curtis, Nichole A. Bauer, Neeraj Chauhan, Deepak Kumar, Meena Jaggi, Subhash C. Chauhan

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Breast cancer is a commonly diagnosed cancer among women in the United States. It is estimated that 230,480 women were diagnosed with, and 39,520 women died from, breast cancer in 2011 in the United States.¹ Basal-like breast cancer accounts for 15% of all breast cancers and has a poor prognosis. The majority of these cancers are referred to as triple-negative breast cancers because they do not over express estrogen receptor, progesterone receptor, or human epidermal growth factor receptor 2.^2,3 Chemotherapy is an effective option to treat such cancers; however, chemotherapy is always associated with several sets of side …

Ferroelectric Control Of Magnetocrystalline Anisotropy At Cobalt/Poly(Vinylidene Fluoride) Interfaces, Pavel Lukashev, Tula R. Paudel, Juan M. López-Encarnación, Shireen Adenwalla, Evgeny Y. Tsymbal, Julian P. Velev

Shireen Adenwalla Papers

Electric field control of magnetization is one of the promising avenues for achieving high-density energy-efficient magnetic data storage. Ferroelectric materials can be especially useful for that purpose as a source of very large switchable electric fields when interfaced with a ferromagnet. Organic ferroelectrics, such as poly(vinylidene fluoride) (PVDF), have an additional advantage of being weakly bonded to the ferromagnet, thus minimizing undesirable effects such as interface chemical modification and/or strain coupling. In this work we use first-principles density functional calculations of Co/PVDF heterostructures to demonstrate the effect of ferroelectric polarization of PVDF on the interface magnetocrystalline anisotropy that controls the …

Head Ejection During Barrier Impacts, Scott K. Rosenbaugh, Ronald K. Faller, Dean L. Sicking

Department of Civil and Environmental Engineering: Faculty Publications

During oblique vehicular impacts with longitudinal barriers, an occupant’s head is often ejected out of a side window. When this occurs, the occupant’s head can contact the barrier or an object attached thereto. This impact event, often termed head slap, normally produces a serious injury or fatality. Roadside barriers and any attached hardware should be designed with sufficient offset at the top to preclude head slap for most impact conditions. The goal of this study was to identify the extent of head ejection that can be expected during high-speed crashes with longitudinal barriers. High-speed videos of full-scale vehicle crash tests …

Drop Weight Testing On Sandwich Panels With A Novel Thermoplastic Core Material, Christopher Y. Tuan

Department of Civil and Environmental Engineering: Faculty Publications

A series of drop weight tests were conducted to evaluate the dynamic flatwise compression strength and flexural strength of sandwich panels with a novel core structure. This sandwich core material, known as Norcore, consists of interconnected cells in a unique configuration of truncated pyramid with sloping cell walls. Core materials made of thermoplastic including virgin Lexan, polycarbonate, polycarbonate regrind, high-impact polystyrene, and acrylonitrile butadiene styrene were tested. The test results showed that these sandwich panels have good strength as well as energy absorption capacities.

Evaluation Of Ice-Melting Capacities Of Deicing Chemicals, B. M. Gerbino-Bevins, Christopher Y. Tuan, M. Mattison

Department of Civil and Environmental Engineering: Faculty Publications

Common deicing chemicals include sodium chloride, magnesium chloride, calcium chloride, calcium magnesium acetate, potassium acetate, potassium formate, and corn or beet-based deicer solution. Liquid deicers are commonly used for pre-wetting road salt, sand or other solid deicers, or mixed with salt brine as liquid deicer. Although manufacturers provide performance data under specific conditions, a standardized test is very much needed. Samples of sodium chloride, magnesium chloride, calcium chloride, potassium acetate, and beet juice-based chemical deicers were selected for performance evaluation. The SHRP Ice-Melting Capacity Test has been used in many research projects, but the results do not always correlate well …

Energy Issues Affecting Corn/Soybean Systems: Challenges For Sustainable Production, Douglas L. Karlen, David Archer, Adam Liska, Seth Meyer

Adam Liska Papers

Quantifying energy issues associated with agricultural systems, even for a two-crop corn (Zea mays L.) and soybean (Glycine max [L.] Merr.) rotation, is not a simple task. It becomes even more complicated if the goal is to include all aspects of sustainability (i.e., economic, environmental, and social). This Issue Paper examines energy issues associated with and affecting corn/soybean rotations by first defining the size of the system from both a U.S. and global perspective and then establishing boundaries based on the Farm Bill definition of sustainability. This structured approach is essential to help quantify energy issues within corn/soybean …

Mononuclear Phagocyte Intercellular Crosstalk Facilitates Transmission Of Cell-Targeted Nanoformulated Antiretroviral Drugs To Human Brain Endothelial Cells, Georgette D. Kanmogne, Sangya Singh, Upal Roy, Xinming Liu, Joellyn Mcmillan, Santhi Gorantla, Shantanu Balkundi, Nathan Smith, Yazen Alnouti, Nagsen Gautam, You Zhou, Larisa Poluektova, Alexander Kabanov, Tatiana Bronich, Howard Gendelman

Nebraska Center for Biotechnology: Faculty and Staff Publications

Despite the successes of antiretroviral therapy (ART), HIV-associated neurocognitive disorders remain prevalent in infected people. This is due, in part, to incomplete ART penetration across the blood–brain barrier (BBB) and lymph nodes and to the establishment of viral sanctuaries within the central nervous system. In efforts to improve ART delivery, our laboratories developed a macrophage-carriage system for nanoformulated crystalline ART (nanoART) (atazanavir, ritonavir, indinavir, and efavirenz). We demonstrate that nanoART transfer from mononuclear phagocytes (MP) to human brain microvascular endothelial cells (HBMEC) can be realized through cell-to-cell contacts, which can facilitate drug passage across the BBB. Coculturing of donor MP …

Subsurface Phosphorus Transport And Scale Dependent Phosphorus Leaching In Alluvial Floodplains, Derek Michael Heeren

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Increased nutrient loads have resulted in several adverse impacts on surface water quality, including excessive algal growth, fish kills, and drinking water taste and odor issues across the United States and especially in the Ozark ecoregion of northeastern Oklahoma and northwestern Arkansas. Nitrogen is a concern, but phosphorus (P) is generally considered the limiting nutrient in most surface water systems. Scientists and engineers need to identify critical nutrient source areas and transport mechanisms within a catchment in order to cost effectively protect and enhance drinking water systems, recreation activities, and aquatic ecosystems. While surface runoff is considered to be the …

Generic Strategies To Implement Material Grading In Finite Element Methods For Isotropic And Anisotropic Materials, Ke Yu

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

We look at generic strategies to transfer material grading into finite element methods. Three strategies are proposed to transfer material grading into the finite element analysis. These strategies are node-centered, element-centered, and the definition of material grading through external functions. The process to achieve each strategy is stated, and examples are used to illustrate each strategy, and to compare them. The strategies are implemented in finite-deformation nonlinear elastic analysis.

Several examples are used to illustrate the implementation of each strategy for graded isotropic materials. For these examples, the results obtained from finite element models are compared with those obtained from …

Development Of Self-Stressing System For Bridge Application With Emphasis On Precast Panel Deck System, Marcelo Ferreira Da Silva

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Steel girder bridges often utilize continuity over the pier to reduce interior forces on the spans. In continuous structures with composite concrete decks, the location of maximum negative bending moment is over the interior supports. This moment produces tensile stresses in the concrete deck and compressive stress in the bottom flanges of the girders. The tensile stress in the deck leads to cracking which allow intrusion of moisture and road salt, causing corrosion of the reinforcement and supporting girders. Continued maintenance is required to forestall the deterioration; however, replacement of the deck is eventually required.

To overcome this problem, a …

A Study Of Correlations Between The Definition And Application Of The Gene Ontology, Yuji Mo

Department of Computer Electronics and Engineering: Dissertations, Theses, and Student Research

When using the Gene Ontology (GO), nucleotide and amino acid sequences are annotated by terms in a structured and controlled vocabulary organized into relational graphs. The usage of the vocabulary (GO terms) in the annotation of these sequences may diverge from the relations defined in the ontology. We measure the consistency of the use of GO terms by comparing GO's defined structure to the terms' application. To do this, we first use synthetic data with different characteristics to understand how these characteristics influence the correlation values determined by various similarity measures. Using these results as a baseline, we found that …

Effect Of Extracellular Matrix (Ecm) Protein Micropatterns On The Behavior Of Human Neuroblastoma Cells, Ishwari Poudel

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

Recent advances in patterning techniques and emerging surface microtechnologies have allowed cell micropatterning to control spatial location of the cells on a surface as well as cell shape, attachment area, and number of contacting neighbor cells. These parameters play important roles in cell cellular behaviors. Cell micropatterning has thus become one of the most important strategies for biomedical applications, such as, tissue engineering, diagnostic immunoassays, lab-on-chip devices, bio-sensing, etc., and cell biology studies as well. For neuronal cells, there have been attempts to distribute neuronal cells on specific patterns to control cell-to-cell interaction. However, there have been very limited understanding …

Determining A Community Retrofit Strategy For The Aging Housing Stock Using Utility And Assessor Data, Nathan A. Barry

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

Residential buildings account for about 21.5% of the nation’s primary energy consumption and carbon emissions, and about 38% of electricity use. The housing stock in the United States consists of over 128 million residences with over 60% being constructed prior to 1979 when building codes and regulations began standardizing building practices. Seeking an opportunity to understand and reduce consumption, the scientific community developed a number of model-driven auditing software. While these computer models have been successful in predicting usage patterns in newer residential structures, they have been inaccurate in predicting and analyzing energy use in aging housing stock, predominantly homes …

Ann Based Load Identification And Forecasting System For The Built Environment, Hosen Hasna

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

"Phantom Loads" cause energy waste in homes and the built environment as a whole. Consumers spend more than $3 billion a year on "Phantom Load" in the United States alone. The goal of this work is to conserve energy by increasing consumer awareness on their energy usage and appropriate tools which in turn will be reducing and /or eliminating phantom loads and mismanagement of the load in the built environment. A further goal is to improve upon existing power distribution systems in the built environment with limited hardware additions to increase energy conservation. This work investigates remote identification of load …

An Rf Cmos Implementation Of An Adaptive Filter For Narrow-Band Interferer Suppression In Uwb Systems, Markus Both

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Ultra-wideband (UWB) technology is a new type of technology for wireless communication that is based on the transmission of low power sub-nanosecond pulses. UWB communication utilizes a large bandwidth that overlaps and is coexistent with other wireless communication standards that can be also considered as narrow-band interferers. Because UWB systems are highly susceptible to narrow-band interferers, there is a demand for interferer suppression. An adaptive filter consisting of a two-element diversity receiver that performs minimum mean square error combining (MMSE) by the LMS algorithm is proposed. Thereby the elements of the LMS algorithm as well as the receiver LNA were …

Highly Efficient Maximum Power Point Tracking Using A Quasi-Double-Boost Dc/Dc Converter For Photovoltaic Systems, Christopher J. Lohmeier

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Solar photovoltaic (PV) panels are a great source of renewable energy generation. The biggest problem with solar systems is relatively low efficiency and high cost. This work hopes to alleviate this problem by using novel power electronic converter and control designs. An electronic DC/DC converter, called “Quasi-Double-Boost DC/DC Converter,” is designed for a Solar PV system. A Maximum Power Point Tracking (MTTP) algorithm is implemented through this converter. This algorithm allows the PV system to work at its highest efficiency. Different current sensing and sensorless technologies used with the converter for the MPPT algorithm are offered and tested. Design aspects …

Virtual Microstructure Generation Of Asphaltic Mixtures, Mohammad Haft-Javaherian

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

This thesis describes the development and application of a virtual microstructure generator incorporated with post-processing image analysis methods that can be used to fabricate a virtual, two-dimensional microstructure of asphaltic mixtures. In the generator, geometrical characteristics such as aggregate gradation, aggregate area fraction, angularity, orientation, and elongation were used to transform data from a three-dimensional (3D) mixture into its two-dimensional (2D) microstructure. The 2D virtual microstructures were generated from real 3D mixture information of asphaltic composites. Resulting virtual microstructures were then compared to real cross-sectional microstructure images obtained from actual samples for validation. Comparison presented a good agreement between the …

Acuta Enews December 2011, Vol 40, No. 12

ACUTA Newsletters

In This lssue

Nominate a Colleague for ACUTA Ruth A. Michalecki Leadership Award

From ACUTA Headquarters: What's New?................ Corinne Hoch, Executive Director

Coping with the Next Ethernet, IEEE 802.3ba ......Gary Audin, Delphi, lnc.

View 6 Sessions from the Fall Seminar

Helping Young Professionals Get Professional Development....... Jana McDonald, Texas A&M

lnfo Links ............ Randy Hayes, Univ. of Northern lowa

Member Benefit of the Month: Free Webinars

Committee Corner

Board Report......... Riny Ledgerwood, SDSU

Thanks to our 201 1 Exhibitors

Welcome New Members

Check lt Out: Press Releases...Job Postings...RFls/RFPs...Special Deals!...Corporate Webinars

Phase I Development Of A Non-Proprietary, Four-Cable, High Tension Median Barrier, Mitchell J. Wiebelhaus, Dean L. Sicking, Ronald K. Faller, Karla A. Lechtenberg, John R. Rohde, Robert W. Bielenberg, Scott Rosenbaugh, Erin A. Johnson, John D. Reid

Nebraska Department of Transportation: Research Reports

No abstract provided.

A General Attack Method For Steganography Removal Using Pseudo-Cfa Re-Interpolation, Pradhumna Shrestha, Michael Hempel, Tao Ma, Dongming Peng, Hamid Sharif

Department of Electrical and Computer Engineering: Faculty Publications (to 2015)

Watermarking and steganography are two of the most researched topics in multimedia forensics. However, easy availability of tools and technology has made their misuse a serious concern. To counteract this development some effective tools are necessary to remove malicious steganography. In this work, we introduce a novel watermark attack method which can destroy hidden information embedded in images based on the principle of re-interpolation of Color Filter Array (CFA) artifacts. In digital cameras and scanners, CFA filters are used to acquire low-resolution physical color channel information and produce a high-quality image by subsequent interpolation. We propose to emulate a similar …

Ethnic Difference In Healthcare Delivery, Benny Mathew Varghese

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Quality in healthcare is a very important aspect; this is obtained when there is proper care provided to the patients without any discrimination. The healthcare system in the US can be improved in the fields of patient’s care, the amount of money spent and proper advice, if proper responsibilities are taken. Quality has been improving over the years, but the median by which there is an increase is too small. The other main factor is access to the healthcare system, which has over the year, has not progressed. Studies in healthcare quality should be conducted on a regular base, so …

A Quantitative Performance Analysis Of 2.5 Ghz And 3.65 Ghz Mobile Wimax, Pradhumna L. Shrestha

Department of Computer Electronics and Engineering: Dissertations, Theses, and Student Research

Mobile WiMAX has emerged as a prime contender for the de-facto ITU’s 4G standard. It provides high data rate with large coverage and vehicular mobility support. It has been, and is being, widely deployed in diverse applications like video streaming, broadcasting and data service. The FCC (Federal Communications Commission) issues licenses to operate Mobile WiMAX services in several spectrums, among which 2.5 GHz and 3.65 GHz are the most common. Because the 2.5 GHz spectrum suffers the least propagation losses, it has been widely applied commercially. For this reason, academic and industrial researchers have given it particular attention. However, in …

Evaluation Of The In-Service Safety Performance Of Safety-Shape And Vertical Concrete Barriers, Francisco Daniel Benicio De Albuquerque, Dean L. Sicking

Nebraska Department of Transportation: Research Reports

No abstract provided.

Anisotropic Thermal Property Measurement Of Carbon-Fiber/Epoxy Composite Materials, Tian Tian

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

This work originated from a need for understanding heat transfer in carbon-fiber/epoxy natural-gas tanks undergoing rapid heating during refilling. The dissertation is focused on the determination of the anisotropic thermal properties of carbon-fiber/epoxy composite materials for in-plane and through-thickness directions. An effective anisotropic parameter estimation system consisting of the 3ω experimental technique and an anisotropic two-dimensional heat transfer model is developed.

In the present work, the 3ω method, an experimental technique that has been well established to evaluate the thermal properties of isotropic materials, especially thin film materials, is extended to treat the thermal properties of bulk anisotropic …