Engineering Commons^™

Cross-Layer Optimized Coding Mode Selection For Wireless Video Communications, Yun Ye, Song Ci, Dalei Wu

Department of Electrical and Computer Engineering: Faculty Publications (to 2015)

This paper proposed a coding mode selection method for video transmission over wireless networks. Unlike previous mode selection methods disregarding channel distortion or assuming constant packet loss rate (PLR), this method includes a cross-layer controller to collect both source and channel information. The mode selection process is formulated as a delay constrained distortion minimization problem. The three components in the resulting Lagrange cost function, namely distortion, Lagrange multiplier and packet delay, are estimated with online channel information feedback. Suboptimal coding decision and physical layer modulation and coding scheme (MCS) are determined by the controller for each packet. In our experiment, …

Coupled Electromagnetic And Heat Transfer Model For Microwave Heating In Domestic Ovens, Krishnamoorthy Pitchai, Sohan Birla, Jeyamkondan Subbiah, D. D. Jones, Harshanardhan Thippareddi

Department of Food Science and Technology: Faculty Publications

Microwave ovens are used extensively for heating a variety of not-ready-to-eat food products. Non-uniform heating of foods in microwave ovens is a major concern in assuring microbiological safety of such products. The non-uniform heating of foods is attributed by complex interaction of microwaves with foods. To understand this complex interaction, a comprehensive model was developed to solve coupled electromagnetic and heat transfer equations using finite-difference time-domain based commercial software. The simulation parameters, cell size, heating time step, and number of iterations for steady state electromagnetic field were optimized. The model was validated by 30 s heating profile of a cylindrical …

Moisture Damage Characterization Of Warm-Mix Asphalt Mixtures Based On Laboratory-Field Evaluation, Yong-Rak Kim, Jun Zhang, Hoki Ban

Department of Mechanical and Materials Engineering: Faculty Publications

This study presents laboratory evaluation integrated with field performance to examine two widely used warm-mix asphalt (WMA) approaches—foaming and emulsion technology. For a more realistic evaluation of the WMA approaches, trial pavement sections of the WMA mixtures and their counterpart hot-mix asphalt (HMA) mixtures were implemented in Antelope County, Nebraska. Field-mixed loose mixtures collected at the time of paving were transported to the laboratories to conduct various experimental evaluations of the individual mixtures. Among the laboratory tests, three (two conventional and one newly attempted) were performed to characterize moisture damage potential which is the primary focus of this study. From …

Monitoring The Wall Mechanics During Stent Deployment In A Vessel, Brian Steinert, Shijia Zhao, Linxia Gu

Department of Mechanical and Materials Engineering: Faculty Publications

Clinical trials have reported different restenosis rates for various stent designs . It is speculated that stentinduced strain concentrations on the arterial wall lead to tissue injury, which initiates restenosis . This hypothesis needs further investigations including better quantifications of non-uniform strain distribution on the artery following stent implantation. A non-contact surface strain measurement method for the stented artery is presented in this work. ARAMIS stereo optical surface strain measurement system uses two optical high speed cameras to capture the motion of each reference point, and resolve three dimensional strains over the deforming surface. As a mesh stent is deployed …

Thickness-Shear And Thickness-Twist Modes In An Oblate Elliptical Ceramic Cylinder And Energy Trapping In Contoured Acoustic Wave Resonators, Huijing He, Jiashi Yang, Yi-Hua Huang

Department of Mechanical and Materials Engineering: Faculty Publications

We study shear-horizontal motions of a piezoelectric ceramic cylinder with an oblate elliptical cross section and axial poling. Exact thickness-shear and thickness-twist vibration modes are obtained. These modes show energy trapping, i.e., the vibration is mainly confined near the thick, central region and decays to almost nothing near the edges. The results are useful for the understanding and design of contoured piezoelectric resonators for strong energy trapping.

Systems And Synthetic Biology Of The Vessel Wall, Jennifer Frueh, Nataly Maimari, Ying Lui, Zoltan Kis, Vikram Mehta, Negin Pormehr, Calum Grant, Emmanuel Chalkias, Mika Falck-Hansen, Sandra Bovens, Ryan M. Pedrigi, Taka Homma, Gianfillippo Coppola, Rob Krams

Department of Mechanical and Materials Engineering: Faculty Publications

Atherosclerosis is intimately coupled to blood flow by the presence of predilection sites. The coupling is through mechanotransduction of endothelial cells and approximately 2000 gene are associated with this process. This paper describes a new platform to study and identify new signalling pathways in endothelial cells covering an atherosclerotic plaque. The identified networks are synthesized in primary cells to study their reaction to flow. This synthetic approach might lead to new insights and drug targets.

Nanotopographic Cell Culture Substrate: Polymer-Demixed Nanotextured Films Under Cell Culture Conditions, Jung Yul Lim, Christopher A. Siedlecki, Henry J. Donahue

Department of Mechanical and Materials Engineering: Faculty Publications

Modulating physical cell culture environments via nanoscale substrate topographic modification has recently been of significant interest in regenerative medicine. Many studies have utilized a polymer-demixing technique to produce nanotextured films and showed that cellular adhesion, proliferation, and differentiation could be regulated by the shape and scale of the polymer-demixed nanotopographies. However, little attention has been paid to the topographic fidelity of the polymer-demixed films when exposed to cell culture conditions. In this brief article, two polymer-demixing systems were employed to assess topographic changes in polymer-demixed films after fibronectin (FN) extracellular matrix protein adsorption and after incubation in phosphate-buffered saline at …

Usability Assessment Of Two Different Control Modes For The Master Console Of A Laparoscopic Surgical Robot, Xiaoli Zhang, Carl A. Nelson, Dmitry Oleynikov

Department of Mechanical and Materials Engineering: Faculty Publications

The objective of this study is to evaluate potential interface control modes for a compact fourdegree- of-freedom (4-DOF) surgical robot. The goal is to improve robot usability by incorporating a sophisticated haptics-capable interface. Two control modes were developed using a commercially available haptic joystick: (1) a virtually point-constrained interface providing an analog for constrained laparoscopic motion (3-DOF rotation and 1-DOF translation), and (2) an unconstrained Cartesian input interface mapping more directly to the surgical tool tip motions. Subjects (n = 5) successfully performed tissue identification and manipulation tasks in an animal model in point-constrained and unconstrained control modes, respectively, with …

Tool Sequence Trends In Minimally Invasive Surgery: Statistical Analysis And Implications For Predictive Control Of Multifunction Instruments, Carl A. Nelson, Evan Luxon, Dmitry Oleynikov

Department of Mechanical and Materials Engineering: Faculty Publications

This paper presents an analysis of 67 minimally invasive surgical procedures covering 11 different procedure types to determine patterns of tool use. A new graph-theoretic approach was taken to organize and analyze the data. Through grouping surgeries by type, trends of common tool changes were identified. Using the concept of signal/noise ratio, these trends were found to be statistically strong. The tool-use trends were used to generate tool placement patterns for modular (multi-tool, cartridge-type) surgical tool systems, and the same 67 surgeries were numerically simulated to determine the optimality of these tool arrangements. The results indicate that aggregated tool-use data …

The Impact Of Wire Stent Fabrication Technique On The Performance Of Stent Placement, Shijia Zhao, Xiangyi (Cheryl) Liu, Linxia Gu

Department of Mechanical and Materials Engineering: Faculty Publications

Braided wire stents demonstrate distinct characteristics compared to welded ones. In this study, both braided and welded wire stents with the same nominal dimensions were crimped inside a sheath and then deployed into a stenosed artery using finite element analysis. The braided wire stent was generated by overlapping wires to form crisscross shape. A welded wire stent was created by welding the intersection points of wires to avoid sliding between wires. The effect of fabrication technique on mechanical behavior of Nitinol wire stents was evaluated. The results showed that relative sliding between wires reduced the deformation of the braided stent, …

Arterial Wall Mechanics And Clinical Implications After Coronary Stenting: Comparisons Of Three Stent Designs, Linxia Gu, Shijia Zhao, Stacey R. Froemming

Department of Mechanical and Materials Engineering: Faculty Publications

The goal of this work is to quantitatively assess the relationship between the reported restenosis rates and stent induced arterial stress or strain parameters through finite element method. The impact of three stent designs (Palmaz–Schatz stent, Express stent, and Multilink Vision stent) on the arterial stress distributions were characterized. The influences of initial stent deployment location, stent-tissue friction, and plaque properties on the arterial stresses were also investigated. Higher arterial stresses were observed at the proximal end of the plaque. The Multilink–Vision stent induced lesser stress concentrations due to the high stiffness of the Cobalt Chromium material and thinner strut …

In Vivo Demonstration Of Surgical Task Assistance Using Miniature Robots, Jeff A. Hawks, Jacob Kunowski, Stephen R. Platt

Department of Mechanical and Materials Engineering: Faculty Publications

Laparoscopy is beneficial to patients as measured by less painful recovery and an earlier return to functional health compared to conventional open surgery.However, laparoscopy requires the manipulation of long, slender tools from outside the patient’s body. As a result, laparoscopy generally benefits only patients undergoing relatively simple procedures. An innovative approach to laparoscopy uses miniature in vivo robots that fit entirely inside the abdominal cavity. Our previous work demonstrated that a mobile, wireless robot platform can be successfully operated inside the abdominal cavity with different payloads (biopsy, camera, and physiological sensors). We hope that these robots are a step toward …

Analysis Of A Monolithic, Two-Dimensional Array Of Quartz Crystal Microbalances Loaded By Mass Layers With Nonuniform Thickness, Nan Liu, J. S. Yang, Ji Wang

Department of Mechanical and Materials Engineering: Faculty Publications

We study free thickness-shear vibrations of a monolithic, two-dimensional, and periodic array of quartz crystal microbalances loaded by mass layers with gradually varying thickness. A theoretical analysis is performed using Mindlin’s two-dimensional plate equation. It is shown that the problem is mathematically governed by Mathieu’s equation with a spatially varying coefficient. A periodic solution for resonant frequencies and modes is obtained and used to examine the effects of the mass layers. Results show that the vibration may be trapped or untrapped under the mass layers. The trapped modes decay differently in the two in-plane directions of the plate. The mode …

An Investigation Of Reflective Mulches For Use Over Capillary Mat Systems For Winter-Time Greenhouse Strawberry Production, George E. Meyer, Ellen T. Paparozzi, Elizabeth Walter-Shea, Erin E. Blankenship, Stacy A. Adams

Department of Agronomy and Horticulture: Faculty Publications

Photosynthethically active radiation (PAR) is a principle environmental variable used by horticultural specialists, agronomists and ecosystem modelers to characterize the quantity and quality of light conducive to plant growth and development. Spatial distribution of PAR in a greenhouse can be quite variable and diffuse throughout the day time photoperiod, especially at low sun angles in northern regions of the United States. Four colors of reflective plastic mulches (white, red, olive, and black) were evaluated for winter-time strawberry (Fragaria × ananassa Duch.) production based on their reflectance and transmittance properties in a double-polyethylene, plastic-glazed Quonset greenhouse inNebraska. The spectral properties …

A 3-D Computational Fluid Dynamics Model For Forced Air Cooling Of Eggs Placed In Trays, Vikas Kumar, Ai Pheeng Wee, Sohan Birla, Jeyamkondan Subbiah, Harshanardhan Thippareddi

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Shell eggs must be cooled quickly after laying for controlling Salmonella Enteritidis (SE) growth. To fulfill a research need identified by Food Safety and Inspection Service (FSIS), a 3-D Computational Fluid Dynamics (CFD) model was developed to predict the temperature of eggs placed on a tray (6 rows × 5 columns) under forced air cooling. The continuity, momentum, and energy equations were solved along with standard k-ε turbulence model using PHOENICS software. The model was validated by conducting experiments in a wind tunnel at various air temperatures (7–11 °C) and velocities (0.3– 0.7 m/s). Root mean square error for predicting …

The Biological Systems Engineering Program In Nebraska 1895-2011, William Splinter

Department of Agricultural and Biological Systems Engineering: Faculty Publications

4. Preface: How Mechanization Has Impacted Food Production THE PIONEERS WHO ESTABLISHED THIS DEPARTMENT 8 Oscar Van Pelt Stout 10 Charles Russ Richards 12 J. Brownlee Davidson 14 Leon W. Chase FORMER FACULTY AND THEIR CONTRIBUTIONS 18 Laurence Froyd Seaton 20 Ivan D.Wood 22 Oscar W. Sjogren 23 Chauncey W. Smith 25 Elmer E. Brackett 27 Claud Kedzie Shedd 29 Ruby M. Loper 31 Lester F. Larsen 33 Lloyd W. Hurlbut 36 Rollin Schnieder 39 Howard D. Wittmuss 41 Deon Axthelm 46 Paul. E. Fischbach 48 Stuart O. Nelson 51 Kenneth von Bargen 56 John R. Davis 58 Robert W. …

Evaluation Of The Impact Of Surface Residue Cover On Single And Dual Crop Coefficient For Estimating Soybean Actual Evapotranspiration, Lameck O. Odhiambo, Suat Irmak

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Single and dual crop coefficient methods are used in conjunction with grass reference evapotranspiration (ET_o) to estimate actual crop evapotranspiration (ET_c). However, the impact of soil surface residue cover on the accuracy of ET_c estimated with these methods is not well understood. The objective of this study is to evaluate and compare the accuracy of the FAO-56 single crop coefficient (single-K_c) and dual crop coefficient (dual-K_c) methods for estimating soybean [Glycine max (L.) Merr.] ET_c in a partially residue covered field. The study was conducted …

Using Rapid Geomorphic Assessments To Assess Streambank Stability In Oklahoma Ozark Streams, Derek M. Heeren, Aaron R. Mittelstet, Garey A. Fox, Daniel E. Storm, Abdulsahib T. Al-Madhhachi, Taber L. Midgley, Ashley F. Stringer, Kevin B. Stunkel, Ron D. Tejral

Department of Agricultural and Biological Systems Engineering: Faculty Publications

High streambank erosion and failure rates on streams in the Ozark ecoregion of Oklahoma may be attributed to land use change and degradation of riparian areas. Numerous benefits may be achieved from streambank stabilization, but methods are needed to determine the most critical reaches for investing limited funds. Rapid geomorphic assessments (RGAs) have been used to aid in prioritizing stream reaches. This research (1) applied an existing RGA, the channel stability index (CSI), on several reaches along the Barren Fork Creek and Spavinaw Creek, and (2) modified the existing RGA to create an ecoregion-specific RGA called the Oklahoma Ozark streambank …

Climate Change Impacts On Streamflow, Water Quality, And Best Management Practices For The Shell And Logan Creek Watersheds In Nebraska, M. W. Van Liew, S. Feng, T. B. Pathak

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Improvements in the management of water, sediment, and nutrients under future climatic conditions are needed to ensure increased crop and livestock production to meet greater global needs and the future availability of water for competing demands and protection against adverse water quality impairments. This study determined the impacts of future climate change scenarios on streamflow, water quality, and best management practices (BMPs) for two watersheds in Nebraska, USA. The Soil and Water Assessment Tool (SWAT) was employed to simulate streamflow, sediment, total nitrogen (N) and total phosphorus (P) from the Shell Creek Watershed near Columbus, Nebraska and the Logan Creek …

Carbon, Water, And Heat Flux Responses To Experimental Burning And Drought In A Tallgrass Prairie, Marc L. Fischer, M S. Torn, David P. Billesbach, Geoffrey Doyle, Brian Northup, Sebastien C. Biraud

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Drought and fire are common disturbances to grassland ecosystems. We report two years of eddy covariance ecosystem–atmosphere fluxes and biometric variables measured in nearby burned and unburned pastures in the US Southern Great Plains. Over the course of the experiment, annual precipitation (∼600 mm yr⁻¹) was lower than the long term mean (∼860 mm yr⁻¹). Soil moisture decreased from productive conditions in March 2005 dry, unproductive conditions during the growing season starting in March 2006. Just prior to the burn in early March 2005, burned and unburned pastures contained 520 ± 60 and 360 ± 40 …

Global Estimation Of Evapotranspiration Using A Leaf Area Index-Based Surface Energy And Water Balance Model, H. Yan, S.Q. Wang, David P. Billesbach, Walter Oechel, J.H. Zhang, Tilden Meyers, Ta. Martin, Roser Matamala, Dennis D. Baldocchi, G. Bohrer, D. Dragoni, R. Scott

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Studies of global hydrologic cycles, carbon cycles and climate change are greatly facilitated when global estimates of evapotranspiration (E) are available. We have developed an air-relative-humidity-based two-source (ARTS) E model that simulates the surface energy balance, soil water balance, and environmental constraints on E. It uses remotely sensed leaf area index (L_ai) and surface meteorological data to estimate E by: 1) introducing a simple biophysical model for canopy conductance (G_c), defined as a constant maximum stomatal conductance g_smax of 12.2mm s⁻¹multiplied by air relative humidity (R_{h …}

Fabrication And Characterization Of Dna-Loaded Zein Nanospheres, Mary C. Regier, Jessica D. Taylor, Tyler Borcyk, Yiqi Yang, Angela K. Pannier

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Background: Particulates incorporating DNA are promising vehicles for gene delivery, with the ability to protect DNA and provide for controlled, localized, and sustained release and transfection. Zein, a hydrophobic protein from corn, is biocompatible and has properties that make it a promising candidate material for particulate delivery, including its ability to form nanospheres through coacervation and its insolubility under physiological conditions, making it capable of sustained release of encapsulated compounds. Due to the promise of this natural biomaterial for drug delivery, the objective of this study was to formulate zein nanospheres encapsulating DNA as the therapeutic compound, and to …

Runoff Nutrient Loads As Affected By Residue Cover, Manure Application Rate, And Flow Rate, Chance Thayer, John E. Gilley, Lisa M. Durso, David B. Marx

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Manure is applied to cropland areas with varying surface cover to meet single‐year or multiple‐year crop nutrient requirements. The objectives of this field study were to: (1) examine runoff water quality characteristics following land application of manure to sites with and without wheat residue, (2) compare the water quality impacts of land application of manure to meet 0‐, 1‐, 2‐, 4‐, and 8‐year P‐based requirements for corn, and (3) evaluate the effects of varying runoff rates on runoff nutrient loads. Three 30‐min simulated rainfall events, separated by 24 h intervals, were applied at an intensity of 70 mm h^{‐1 …}

Quantification And Heterogeneity Of Infiltration And Transport In Alluvial Floodplains, Derek M. Heeren, Garey A. Fox, Daniel E. Storm, Peter Q. Storm, Brian E. Haggard, Todd Halihan, Ronald B. Miller

Department of Agricultural and Biological Systems Engineering: Faculty Publications

In order to protect drinking water systems and aquatic ecosystems, all critical nutrient source areas and transport mechanisms need to be characterized. It is hypothesized that hydrologic heterogeneities (e.g., macropores and gravel outcrops) in the subsurface of floodplains play an integral role in impacting flow and contaminant transport between the soil surface and shallow alluvial aquifers which are intricately connected to streams. Infiltration is often assumed to be uniform at the field scale, but this neglects the high spatial variability common in anisotropic, heterogeneous alluvial floodplain soils. In the Ozark ecoregion, for example, the erosion of carbonate bedrock (primarily limestone) …

Berm Method For Quantification Of Infiltration And Leaching At The Plot Scale In High Conductivity Soils, Derek M. Heeren, Garey A. Fox, Daniel E. Storm

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Measuring infiltration and leaching at the plot scale is difficult, especially for high hydraulic conductivity soils. Infiltration rate has been indirectly calculated at the plot scale by comparing surface runoff to rainfall. Direct measurement of infiltration and leaching beyond the point scale is typically limited to locations where land forming has been performed, e.g. infiltration ponds and fields with basin irrigation. The standard method for field measurement of infiltration is a double ring infiltrometer, which is limited in size (typically 30 cm diameter). In this research, a new method is proposed that uses a temporary berm constructed of a water …

Field Scale Modeling To Estimate Phosphorus And Sediment Load Reductions Using A Newly Developed Graphical User Interface For Soil And Water Assessment Tool, Aaron R. Mittelstet, Erin R. Daly, Daniel E. Storm, Michael J. White, Greg A. Kloxin

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Streams throughout the North Canadian River watershed in northwest Oklahoma, USA have elevated levels of nutrients and sediment. Soil and Water Assessment Tool (SWAT) was used to identify areas that likely contributed disproportionate amounts of Phosphorus (P) and sediment to Lake Overholser, the receiving reservoir at the watershed outlet. These sites were then targeted by the Oklahoma Conservation Commission (OCC) to implement conservation practices, such as conservation tillage and pasture planting as part of a US Environmental Protection Agency Section 319(h) project. Conservation practices were implemented on 238 fields. The objective of this project was to evaluate conservation practice effectiveness …

Whose Water Is It Anyway? Comparing The Water Rights Frameworks Of Arkansas, Oklahoma, Texas, New Mexico, Georgia, Alabama, And Florida, M. D. Smolen, Aaron R. Mittelstet, Bekki Harjo

Department of Agricultural and Biological Systems Engineering: Faculty Publications

In most states surface waters, (streams, lakes, and coastal waters) are owned by the public. On the other hand, ground water may be privately or publicly owned. Because all waters are linked through the hydrologic cycle, and the hydrologic cycle is not confined within any geographic or political boundary, the question of ownership is generally replaced by one of who has the right to manage, divert, use, or sell the water.

Comparison Of 2-Way Versus Metered 3-Way Boom Shut-Off Valves For Automatic Section Control On Agricultural Sprayers, Ajay Sharda, Joe D. Luck, John P. Fulton, Timothy P. Mcdonald, Scott A. Shearer, Daniel K. Mullenix

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Modern spray rate controllers along with technologies such as automatic section control (ASC) provide benefits such as overlap reduction on agricultural sprayers. However, product (liquid) dynamics within the boom plumbing affect off-rate errors and application uniformity during rate changes and ASC actuation. Therefore, this study was conducted to compare nozzle flow stability and uniformity across the boom when using two different boom shut-off valves (2-way and metered 3-way) on an 18.3-m sprayer boom. Pressure transducers were mounted at 1) the boom manifold, 2) randomly at 12 nozzle bodies across the spray boom, and 3) upstream and downstream of the flow …

Selecting Sprinkler Packages For Center Pivots, Derrel L. Martin, William L. Kranz, Allen L. Thompson, Hong Liang

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Center pivots are the primary method of irrigation across the U.S. Great Plains. Center-pivot irrigation is also the fastest growing method of irrigation in the U.S. and around the world. Pivots have the potential to be very efficient and uniform if sprinkler devices are properly selected for local field conditions. New water application devices provide for selection that minimizes runoff and controls droplet sizes to reduce evaporation and drift losses. We present updates to models for computing runoff potential based on characteristics of sprinkler devices and soil textural classes. A dimensionless solution to the Green-Ampt infiltration method for center pivots …

Sensitivity Of Grass- And Alfalfa-Reference Evapotranspiration To Weather Station Sensor Accuracy, Dana O. Porter, Prasanna H. Gowda, Thomas H. Marek, Terry A. Howell, Jerry Moorhead, Suat Irmak

Department of Agricultural and Biological Systems Engineering: Faculty Publications

A sensitivity analysis was conducted to determine the relative effects of measurement errors in climate data input parameters on the accuracy of calculated reference crop evapotranspiration (ET) using the ASCE-EWRI Standardized Reference ET Equation. Data for the period of 1995 to 2008 from an automated weather station located at the USDA-ARS Conservation and Production Research Laboratory at Bushland, Texas were used for the analysis. Results

indicated that grass (ET_os) and alfalfa (ET_rs) reference crop ET were most sensitive to measurement errors in wind speed and air temperature followed by incoming shortwave (solar) radiation, and that data …