Engineering Commons^™

Mid To Late Season Weed Detection In Soybean Production Fields Using Unmanned Aerial Vehicle And Machine Learning, Arun Narenthiran Veeranampalayam Sivakumar

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Mid-late season weeds are those that escape the early season herbicide applications and those that emerge late in the season. They might not affect the crop yield, but if uncontrolled, will produce a large number of seeds causing problems in the subsequent years. In this study, high-resolution aerial imagery of mid-season weeds in soybean fields was captured using an unmanned aerial vehicle (UAV) and the performance of two different automated weed detection approaches – patch-based classification and object detection was studied for site-specific weed management. For the patch-based classification approach, several conventional machine learning models on Haralick texture features were …

Fiber Optic Bolometer, Ming Han, Matthew L. Reinke

Department of Electrical and Computer Engineering: Faculty Publications

The present disclosure is directed to a fiber optic bolometer device . In an implementation , a fiber optic bolometer device includes an optical fiber and a silicon layer that comprises a Fabry - Perot interferometer . The silicon layer includes a first surface and a second surface . The fiber optic bolometer device includes a reflective dielectric film disposed over the first surface of the silicon layer where the reflective dielec tric film is adjacent to an end face of the optical fiber . The fiber optic bolometer device also includes an absorptive coating disposed over the second surface …

Design, Development, And Field Testing A Visnir Integrated Multi-Sensing Soil Penetrometer, Nuwan K. Wijewardane

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

The research community in soil science and agriculture lacks a cost-effective and rapid technology for in situ, high resolution vertical soil sensing. Visible and near infra-red (VisNIR) technology has the potential to be used for such sensor development due to its ability to derive multiple soil properties rapidly using a single spectrum. Such efforts must, however, overcome a few challenges: (i) a dry ground soil spectral library that can be used to predict the target soil properties accurately, (ii) a robust design which can acquire high quality VisNIR spectra of soil, (iii) an effective method that can link field intact …

Perchlorate Behavior In The Context Of Black Carbon And Metal Cogeneration Following Fireworks Emission At Oak Lake, Lincoln, Nebraska, Usa, Manish Kumar, Daniel D. Snow, Yusong Li, Patrick Shea

Nebraska Water Center: Faculty Publications

The imprints of fireworks displays on the adjacent water body were investigated from the perspective of cogeneration of black carbon, metals and perchlorate (ClO₄^–). In particular, the mixing and dissipation of ClO₄^– were studied at Oak Lake, Lincoln, Nebraska, following fireworks displays in 2015 and 2016. Following the display, ClO₄^– concentration in the water increased up to 4.3 μg/L and 4.0 μg/L in 2015 and 2016, respectively. A first-order model generally provided a good fit to the measured perchlorate concentrations from which the rate of dissipation was estimated as 0.07 d^–1 in …

A Multi-Sensor Phenotyping System: Applications On Wheat Height Estimation And Soybean Trait Early Prediction, Wenan Yuan

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Phenotyping is an essential aspect for plant breeding research since it is the foundation of the plant selection process. Traditional plant phenotyping methods such as measuring and recording plant traits manually can be inefficient, laborious and prone to error. With the help of modern sensing technologies, high-throughput field phenotyping is becoming popular recently due to its ability of sensing various crop traits non-destructively with high efficiency. A multi-sensor phenotyping system equipped with red-green-blue (RGB) cameras, radiometers, ultrasonic sensors, spectrometers, a global positioning system (GPS) receiver, a pyranometer, a temperature and relative humidity probe and a light detection and ranging (LiDAR) …

Observations Of Shear Stress Effects On Staphylococcus Aureus Biofilm Formation, Erica Sherman, Kenneth W. Bayles, Derek Moormeir, Jennifer Endres, Timothy Wei

Department of Mechanical and Materials Engineering: Faculty Publications

Staphylococcus aureus bacteria form biofilms and distinctive microcolony or “tower” structures that facilitate their ability to tolerate antibiotic treatment and to spread within the human body. The formation of microcolonies, which break off, get carried downstream, and serve to initiate biofilms in other parts of the body, is of particular interest here. It is known that flow conditions play a role in the development, dispersion, and propagation of biofilms in general. The influence of flow on microcolony formation and, ultimately, what factors lead to microcolony development are, however, not well understood. The hypothesis being examined is that microcolony structures form …

Modeling Thermal And Mechanical Cancellation Of Residual Stress From Hybrid Additive Manufacturing By Laser Peening, Guru Madireddy, Chao Li, Jingfu Liu, Michael P. Sealy

Department of Mechanical and Materials Engineering: Faculty Publications

Additive manufacturing (AM) of metals often results in parts with unfavorable mechanical properties. Laser peening (LP) is a high strain rate mechanical surface treatment that hammers a workpiece and induces favorable mechanical properties. Peening strain hardens a surface and imparts compressive residual stresses improving the mechanical properties of a material. This work investigates the role of LP on layer-by-layer processing of 3D printed metals using finite element analysis. The objective is to understand temporal and spatial residual stress development after thermal and mechanical cancellation caused by cyclically coupling printing and peening. Results indicate layer peening frequency is a critical process …

Method For Fabrication Of A Soft-Matter Printed Circuit Board, Carmel Majidi, Tong Lu, Eric J. Markvicka

Department of Mechanical and Materials Engineering: Faculty Publications

A fabrication process for soft - matter printed circuit boards is disclosed in which traces of liquid - phase Ga - In eutectic ( eGaIn ) are patterned with UV laser micromachining ( UVLM ) . The terminals of the elastomer - sealed LM circuit connect to the surface mounted chips through vertically aligned columns of eGaIn - coated ferromagnetic micro spheres that are embedded within an interfacial elastomer layer .

Community Involvement And Leadership In Nonmetropolitan Nebraska: Rural Poll Research Report 19-1, Rebecca Vogt, Cheryl A. Burkhart-Kriesel, Randolph Cantrell, Bradley Lubben, L. J. Mcelravy, Timothy Meyer, Jason L. Weigle

Rural Futures Institute: Publications

Community leadership and involvement are important parts of community development. Rural communities rely on volunteers for many community development activities as well as local leadership positions. In smaller communities in particular, community members often take on multiple roles. Given these challenges, how involved are rural Nebraskans in community and political activities? How do they feel about the leadership in their community? How often do they have social interactions with others during a typical month? This paper provides a detailed analysis of these questions. This report details 1,776 responses to the 2019 Nebraska Rural Poll, the 24th annual effort to understand …

Modeling The Interplay Between Photosynthesis, Co2 Fixation, And The Quinone Pool In A Purple Non-Sulfur Bacterium, Adil Alsiyabi

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

Rhodopseudomonas palustris CGA009 is a purple non-sulfur bacterium (PNSB) that can fix CO₂ and nitrogen or break down organic compounds for its carbon and nitrogen requirements. Light, inorganic, and organic compounds can all be used for its source of energy. Excess electrons produced during its metabolic processes can be exploited to produce hydrogen gas or biodegradable polyesters (polyhydroxybutyrate). A genome-scale metabolic model of the bacterium was reconstructed to study the interactions between photosynthesis, carbon dioxide fixation, and the redox state of the quinone pool. A comparison of model-predicted flux values with published in vivo MFA fluxes resulted in predicted …

Bioproduction Of Adipic Acid Using Engineered Pseudomonas Putida Kt2440 From Lignin-Derived Aromatics, Howard Willett

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

Current industrial synthesis of adipic acid is nonrenewable and depends on a carcinogenic starting material, benzene. Biocatalysis with an engineered microorganism could turn a renewable feedstock into a value-added chemical such as adipic acid. Here we engineered P. putida KT2440 to transform lignin-derived aromatics, coumarate and ferulate, into adipic acid. Lignin is a recalcitrant plant biopolymer burned for thermal energy. Conversion of lignin into a value-added chemical will improve the efficiency of lignocellulose processing plants. The best performing engineered KT2440 strain produces 2.52 mM adipate at a 9.5% (mole/mole) yield. This was achieved by the genetic insertion of non-natural biosynthetic …

User Privacy Leakage In Location-Based Mobile Ad Services, Qicheng Lin

School of Computing: Dissertations, Theses, and Student Research

The online advertising ecosystem leverages its massive data collection capability to learn the properties of users for targeted ad deliveries. Many Android app developers include ad libraries in their apps as a way of monetization. These ad libraries contain advertisements from the sell-side platforms, which collect an extensive set of sensitive information to provide more relevant advertisements for their customers. Existing efforts have investigated the increasingly pervasive private data collection of mobile ad networks over time. However, there lacks a measurement study to evaluate the scale of privacy leakage of ad networks across different geographical areas. In this work, we …

Microbial Transport As Affected By Residue Cover And Manure Application Rate, Lisa M. Durso, John E. Gilley, Dave B. Marx, Chance A. Thayer, Brian L. Woodbury

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Manure is applied to cropland areas with varying surface cover to meet single- or multiple-year crop nutrient requirements. The objectives of this field study were to (1) examine microbial transport following land application of manure to sites with and without wheat residue, (2) compare microbial loads following land application to meet the 0, 1, 2, 4, and 8-year P-based requirements for corn, and (3) evaluate the effects of rainfall simulation run on microbial transport. Manure was added and incorporated by disking plots that were 0.75 m wide by 2.0 m long. Three 30 min simulated rainfall events, separated by 24 …

In Vivo Human-Like Robotic Phenotyping Of Leaf And Stem Traits In Maize And Sorghum In Greenhouse, Abbas Atefi

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

In plant phenotyping, the measurement of morphological, physiological and chemical traits of leaves and stems is needed to investigate and monitor the condition of plants. The manual measurement of these properties is time consuming, tedious, error prone, and laborious. The use of robots is a new approach to accomplish such endeavors, which enables automatic monitoring with minimal human intervention. In this study, two plant phenotyping robotic systems were developed to realize automated measurement of plant leaf properties and stem diameter which could reduce the tediousness of data collection compare to manual measurements. The robotic systems comprised of a four degree …

Tailoring Cell-Material Interactions Via Poly(Acrylic Acid) Brushes To Enhance Nonviral Substrate-Mediated Gene Delivery, Amy Mantz

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Nonviral gene delivery modifies gene expression by transferring exogenous genetic material into cells and tissues, typically through a bolus of complexes formed by electrostatic interactions between cationic lipid or polymer vectors with negatively charged nucleic acids (e.g. DNA). Although nonviral gene delivery is safer, more cost-effective, and more flexible compared to viral systems, nonviral transfection suffers from low efficiency due to extracellular and intracellular barriers. Much research has focused on tuning physiochemical properties of the complexing vectors to improve transfection, yet the cell-material interface may prove a better platform to immobilize DNA complexes for substrate-mediated delivery (SMD) and modulate the …

Sustainability Assessment Of U.S. Beef Processing And Its Antimicrobial Systems, Shaobin Li

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

With the increasing meat demand and awareness of sustainability, concerns have been raised regarding the sustainability of beef production and processing. However, scarce data and inadequate sustainability assessment frameworks for the U.S. beef processing industry limit the ability to develop new technologies and policies comprehensively without shifting sustainability burdens. To fill those gaps, various assessments of the U.S. beef processing industry were conducted from multiple perspectives regarding the environmental, economic, microbial effectiveness of its antimicrobial systems, and human health impacts from foodborne illness, occupational hazards, and environmental pollution.

First, process-level water and energy usage at a typical large-size beef processing …

Fibrinogen, Factor Xiii And Fibronectin: A Biophysical And Kinetic Characterization Of Their Interactions, Frank Fabian

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

The development of recombinant-based liquid fibrin tissue sealants having enhanced hemostatic and wound healing properties will involve understanding as yet not well characterized interactions between fibrinogen, fibrin (Fbn) factor XIII, thrombin and fibronectin. We study these phenomena in the context of comparing plasma derived fibrinogen to recombinant fibrinogen (rFI) produced in the milk of transgenic cows. An abundance of purified γγ and γγ’ FI subspecies enables detailed study of γγ or γγ’ biomonomer and their respective Fbn biopolymer formation as having different substrate behaviors of activated plasma derived factor XIII (pFXIIIa₂b₂). High pressure size exclusion (HPSEC) …

High‑Throughput Analysis Of Leaf Physiological And Chemical Traits With Vis–Nir–Swir Spectroscopy: A Case Study With A Maize Diversity Panel, Yufeng Ge, Abbas Atefi, Huichun Zhang, Chenyong Miao, Raghuprakash Kastoori Ramamurthy, Brandi Sigmon, Jinliang Yang, James C. Schnable

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Hyperspectral reflectance data in the visible, near infrared and shortwave infrared range (VIS–NIR– SWIR, 400–2500 nm) are commonly used to nondestructively measure plant leaf properties. We investigated the usefulness of VIS–NIR–SWIR as a high-throughput tool to measure six leaf properties of maize plants including chlorophyll content (CHL), leaf water content (LWC), specific leaf area (SLA), nitrogen (N), phosphorus (P), and potassium (K). This assessment was performed using the lines of the maize diversity panel. Data were collected from plants grown in greenhouse condition, as well as in the field under two nitrogen application regimes. Leaf-level hyperspectral data were collected with …

Workforce Development Through Online Experiential Learning For Stem Education, Arefeh Mohammadi, Kevin Grosskopf, John Killingsworth

Durham School of Architectural Engineering and Construction: Faculty Publications

The U.S. workforce is increasingly comprised of older adults, women, and minorities who lack basic skills and are unable to acquire these skills through traditional educational and training programs. New approaches are needed to provide effective training to the adult learner and flexible support for nontraditional students who must balance work-life demands with limited educational opportunities. Contextualized teaching and learning (CTL) is a form of experiential learning that blends both basic skills and occupational training together in environments that allow students to relate subject matter to real-world situations. Virtual CTL environments can be created to better engage students, provide immediate …

Scheduling And Prefetching In Hadoop With Block Access Pattern Awareness And Global Memory Sharing With Load Balancing Scheme, Sai Suman

School of Computing: Dissertations, Theses, and Student Research

Although several scheduling and prefetching algorithms have been proposed to improve data locality in Hadoop, there has not been much research to increase cluster performance by targeting the issue of data locality while considering the 1) cluster memory, 2) data access patterns and 3) real-time scheduling issues together.

Firstly, considering the data access patterns is crucial because the computation might access some portion of the data in the cluster only once while the rest could be accessed multiple times. Blindly retaining data in memory might eventually lead to inefficient memory utilization.

Secondly, several studies found that the cluster memory goes …

Biomethane Production From Distillery Wastewater, Zachary Christman

Department of Agronomy and Horticulture: Dissertations, Theses, and Student Research

Distillery wastewater treatment is a great ecological problem, for example, India produces 2.7 billion liters of alcohol that results in 40 billion liters of wastewater. However, this material can be seen as a resource since 11 million cubic meters of biogas at 60% methane could be produced in addition to cleaning the water. The distillery has two options of what to do with the biogas. The first is to use the biogas to fuel the distillery making the production plant more energy efficient and removing some of the need to buy natural gas. The other is to upgrade the biogas …

A Spatially Enhanced Data‐Driven Multimodel To Improve Semiseasonal Groundwater Forecasts In The High Plains Aquifer, Usa, A. Amaranto, Francisco Munoz-Arriola, D. P. Solomatine, G. Corzo

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The aim of this paper is to improve semiseasonal forecast of groundwater availability in response to climate variables, surface water availability, groundwater level variations, and human water management using a two‐step data‐driven modeling approach. First, we implement an ensemble of artificial neural networks (ANNs) for the 300 wells across the High Plains aquifer (USA). The modeling framework includes a method to choose the most relevant input variables and time lags; an assessment of the effect of exogenous variables on the predictive capabilities of models; and the estimation of the forecast skill based on the Nash‐Sutcliffe efficiency (NSE) index, the normalized …

Environmental And Occupational Impacts From U.S. Beef Slaughtering Are Of Same Magnitude Of Beef Foodborne Illnesses On Human Health, Shaobin Li, Jeyamkondan Subbiah, Bruce Dvorak

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Foodborne pathogens and occupational hazards are two primary safety concerns for U.S. beef slaughterhouses. The anthropogenic environmental impacts due to intensive resource use and pollution also exert threats to human health. Quantifying human health impacts from various sources remain a grand sustainability challenge for U.S. beef industry. We develop a framework to systematically estimate and compare human health impacts associated with U.S. beef foodborne illnesses from major pathogens and environmental impacts and occupational hazards from U.S. beef slaughtering on a common metric, disability-adjusted life year (DALY). Foodborne illnesses and occupational hazards are estimated by synthesizing published data and methodologies while …

Restricted Crossings On Rural Highways, John Sangster, Tim Adams

Nebraska Department of Transportation: Research Reports

This study examines the potential for replacing the standard intersection design at two-way stop control (TWSC) and all- way stop control (AWSC) intersections along rural highways with a roundabout or a restricted crossing u-turn (RCUT) facility. The geometry of the RCUT design prohibits left and through movements from the side road, and provides a u-turn location downstream from the main crossing. This type of facility has been implemented for rural highways extensively in both Maryland and North Carolina, as well as in limited cases in many other states such as Minnesota and Missouri, with the potential to serve as a …

Assessing The Impact Of Game Day Schedule And Opponents On Travel Patterns And Route Choice Using Big Data Analytics, Anuj Sharma, Vesal Ahsani

Nebraska Department of Transportation: Research Reports

The transportation system is crucial for transferring people and goods from point A to point B. However, its reliability can be decreased by unanticipated congestion resulting from planned special events. For example, sporting events collect large crowds of people at specific venues on game days and disrupt normal traffic patterns.

The goal of this study was to understand issues related to road traffic management during major sporting events by using widely available INRIX data to compare travel patterns and behaviors on game days against those on normal days. A comprehensive analysis was conducted on the impact of all Nebraska Cornhuskers …

A Data Driven Approach To Identify Journalistic 5ws From Text Documents, Venkata Krishna Mohan Sunkara

School of Computing: Dissertations, Theses, and Student Research

Textual understanding is the process of automatically extracting accurate high-quality information from text. The amount of textual data available from different sources such as news, blogs and social media is growing exponentially. These data encode significant latent information which if extracted accurately can be valuable in a variety of applications such as medical report analyses, news understanding and societal studies. Natural language processing techniques are often employed to develop customized algorithms to extract such latent information from text.

Journalistic 5Ws refer to the basic information in news articles that describes an event and include where, when, who, what and why …

Dielectric Function Tensor (1.5 Ev To 9.0 Ev), Anisotropy, And Band To Band Transitions Of Monoclinic Β-(AlXGa1–X)2O3 (X ≤ 0.21) Films, Matthew Hilfiker, Ufuk Kilic, Alyssa Mock, Vanya Darakchieva, Sean Knight, Rafal Korlacki, Akhil Mauze, Yuewei Zhang, James Speck, Mathias Schubert

Department of Electrical and Computer Engineering: Faculty Publications

A set of monoclinic β-(Al_xGa_1–x)₂O₃ films coherently grown by plasma-assisted molecular beam epitaxy onto (010)-oriented β-Ga₂O₃ substrates for compositions x ≤ 0.21 is investigated by generalized spectroscopic ellipsometry at room temperature in the spectral range of 1.5 eV–9.0 eV. We present the composition dependence of the excitonic and band to band transition energy parameters using a previously described eigendielectric summation approach for β-Ga₂O₃ from the study by Mock et al. All energies shift to a shorter wavelength with the increasing Al content in …

Asphalt Binder Laboratory Short-Term Aging, Hamzeh Haghshenas, Robert C. Rea

Nebraska Department of Transportation: Research Reports

The Rolling Thin Film Oven (RTFO) is widely used to simulate asphalt binder short-term aging. However, there is a general interest to improve the current short-term aging protocol especially for reducing the aging time. Besides, there are some doubts about the capability of RTFO in the simulation of aging of highly polymer modified asphalt binders which is mainly due to improper dispersion of such binders in the bottles during rotating and creeping of highly viscous binder out of the bottles during rotation. This work addresses the effect of time, temperature, airflow rate, and weight of asphalt binder on the laboratory …

Introduction To Sorghum Paper Production, Zachary Christman

Department of Agronomy and Horticulture: Dissertations, Theses, and Student Research

Sorghum is a tall grass used for many commercial products such as fodder and syrup. The 10 to 15 feet stalk of the plant has lower lignin than wood and provides a fiber length of 2.31 mm in the outer covering and 1.38 mm for the leaf. Sorghum fiber makes a high quality, strong paper suitable for printing, packaging and paperboard.

Lattice Dynamics Of Orthorhombic Ndgao3, Alyssa Mock, Rafal Korlacki, Sean Knight, Megan Stokey, A. Fritz, Vanya Darakchieva, Mathias Schubert

Department of Electrical and Computer Engineering: Faculty Publications

A complete set of infrared-active and Raman-active lattice modes is obtained from density functional theory calculations for single-crystalline centrosymmetric orthorhombic neodymium gallate. The results for infraredactive modes are compared with an analysis of the anisotropic long-wavelength properties using generalized spectroscopic ellipsometry. The frequency-dependent dielectric function tensor and dielectric loss function tensor of orthorhombic neodymium gallium oxide are reported in the spectral range of 80–1200 cm⁻¹. A combined eigendielectric displacement vector summation and dielectric displacement loss vector summation approach augmented by considerations of lattice anharmonicity is utilized to describe the experimentally determined tensor elements. All infrared-active transverse and longitudinal …