Engineering Commons^™

Nanothermomechanical And And Or Logic Gates, Ahmed Hamed, Sidy Ndao

Department of Mechanical and Materials Engineering: Faculty Publications

Today’s electronics cannot perform in harsh environments (e.g., elevated temperatures and ionizing radiation environments) found in many engineering applications. Based on the coupling between near-field thermal radiation and MEMS thermal actuation, we presented the design and modeling of NanoThermoMechanical AND, OR, and NOT logic gates as an alternative, and showed their ability to be combined into a full thermal adder to perform complex operations. in this work, we introduce the fabrication and characterization of the first ever documented Thermal AND and OR logic gates. Theresults show thermal logic operations can be achieved successfully through demonstrated and easy-to- manufacture nanothermoMechanical logic …

Electrospun Thymosin Beta-4 Loaded Plga/Pla Nanofiber/ Microfiber Hybrid Yarns For Tendon Tissue Engineering Application, Shaohua Wu, Rong Zhou, Fang Zhou, Philipp N. Streubel, Shaojuan Chen, Bin Duan

Department of Mechanical and Materials Engineering: Faculty Publications

Microfiber yarns (MY) have been widely employed to construct tendon tissue grafts. However, suboptimal ultrastructure and inappropriate environments for cell interactions limit their clinical application. Herein, we designed a modified electrospinning device to coat poly(lactic-co-glycolic acid) PLGA nanofibers onto polylactic acid (PLA) MY to generate PLGA/PLA hybrid yarns (HY), which had a well-aligned nanofibrous structure, resembling the ultrastructure of native tendon tissues and showed enhanced failure load compared to PLA MY. PLGA/PLA HY significantly improved the growth, proliferation, and tendon-specific gene expressions of human adipose derived mesenchymal stem cells (HADMSC) compared to PLA MY. Moreover, thymosin beta-4 (Tβ4) loaded PLGA/PLA …

Additive Manufacturing Of Magnesium Alloys, Rakeshkumar Karunakaran, Sam Ortgies, Ali Tamayol, Florin Bobaru, Michael P. Sealy

Department of Mechanical and Materials Engineering: Faculty Publications

Magnesium alloys are a promising new class of degradable biomaterials that have a similar stiffness to bone, which minimizes the harmful effects of stress shielding. Use of biodegradable magnesium implants eliminates the need for a second surgery for repair or removal. There is a growing interest to capitalize on additive manufacturing's unique design capabilities to advance the frontiers of medicine. However, magnesium alloys are difficult to 3D print due to the high chemical reactivity that poses a combustion risk. Furthermore, the low vaporization temperature of magnesium and common biocompatible alloying elements further increases the difficulty to print fully dense structures …

Passivation Of Defects In Perovskite Materials For Improved Solar Cell Efficiency And Stability, Jinsong Huang, Xiaopeng Zheng

Department of Mechanical and Materials Engineering: Faculty Publications

Semiconductor devices, and methods of forming the same, include a cathode layer, an anode layer, and an active layer disposed between the cathode layer and the anode layer, wherein the active layer includes a perovskite layer. A passivation layer is disposed directly on a surface of the active layer between the cathode layer and the active layer, the passivation layer including a layer of material that passivates both cationic and anionic defects in the surface of the active layer.

3d Printing Of Multilayered Scaffolds For Rotator Cuff Tendon Regeneration, Xiping Jiang, Shaohua Wu, Mitchell Kuss, Yunfan Kong, Wen Shi, Philipp N. Streubel, Tieshi Li, Bin Duan

Department of Mechanical and Materials Engineering: Faculty Publications

Repairing massive rotator cuff tendon defects remains a challenge due to the high retear rate after surgical intervention. 3D printing has emerged as a promising technique that enables the fabrication of engineered tissues with heterogeneous structures and mechanical properties, as well as controllable microenvironments for tendon regeneration. In this study, we developed a new strategy for rotator cuff tendon repair by combining a 3D printed scaffold of polylactic-co-glycolic acid (PLGA) with cell-laden collagen-fibrin hydrogels. We designed and fabricated two types of scaffolds: one featuring a separate layer-by-layer structure and another with a tri-layered structure as a whole. Uniaxial tensile tests …

Imparities Of Shear Avalanches Dynamic Evolution In A Metallic Glass, Yin Du, Qing Zhou, Qian Jia, Yidi Shi, Haifeng Wang, Jian Wang

Department of Mechanical and Materials Engineering: Faculty Publications

The imparities of shear avalanches dynamic evolution under nanoindentation originating from the soft regions and the stiff matrix were explored in a metallic glass by statistical and dynamic analysis. Upon the continuous indentation process, the dynamic state of the stiff matrix exhibits a transition from a chaotic behavior to a self-organized critical (SOC) behavior, whereas the soft regions are domi-nated by the SOC behavior throughout the indentation process. The mechanism was clarified by the evolution of the cut-off size of shear avalanches. These findings might advance our fundamental understanding of inhomogeneous deformation on microscale.

IMPACT STATEMENT The shear avalanches dynamic …

Foundry Sand Source Reduction Options: Life Cycle Assessment Evaluation, Samuel Ghormley, Robert Williams, Bruce Dvorak

Department of Mechanical and Materials Engineering: Faculty Publications

Foundries represent a significant part of the world’s economy and are a large consumer of energy and producer of solid waste. Sand-handling processes can use 5–10% of a foundry’s total energy. The goal of this research was to explore source reduction and waste minimization at a foundry, using both economic and Life Cycle Assessment (LCA) techniques to compare three secondary sand-reclamation options. LCA software modeled all sand processes at a mid-sized ferrous foundry in the USA. The LCA showed all secondary reclamation technologies, while more energy intensive at the foundry, lowered life cycle environmental impacts, including GHG emissions, ecotoxicity, and …

An Overview Of Additive Manufacturing Technologies—A Review To Technical Synthesis In Numerical Study Of Selective Laser Melting, Abbas Razavykia, Eugenio Brusa, Cristiana Delprete, Reza Yavari

Department of Mechanical and Materials Engineering: Faculty Publications

Additive Manufacturing (AM) processes enable their deployment in broad applications from aerospace to art, design, and architecture. Part quality and performance are the main concerns during AM processes execution that the achievement of adequate characteristics can be guaranteed, considering a wide range of influencing factors, such as process parameters, material, environment, measurement, and operators training. Investigating the effects of not only the influential AM processes variables but also their interactions and coupled impacts are essential to process optimization which requires huge efforts to be made. Therefore, numerical simulation can be an effective tool that facilities the evaluation of the AM …

Facile Production Of Large-Area Cell Arrays Using Surface-Assembled Microdroplets, Karla Perez-Toralla, Angel Olivera-Torres, Mark A. Rose, Amir Monemian Monemianesfahani, Keerthana Reddy, Ruiguo Yang, Stephen Morin

Department of Mechanical and Materials Engineering: Faculty Publications

Techniques that enable the spatial arrangement of living cells into defined patterns are broadly applicable to tissue engineering, drug screening, and cell–cell investigations. Achieving large-scale patterning with single-cell resolution while minimizing cell stress/damage is, however, technically challenging using existing methods. Here, a facile and highly scalable technique for the rational design of reconfigurable arrays of cells is reported. Specifically, microdroplets of cell suspensions are assembled using stretchable surface-chemical patterns which, following incubation, yield ordered arrays of cells. The microdroplets are generated using a microfluidic- based aerosol spray nozzle that enables control of the volume/size of the droplets delivered to the …

Characteristic Boundaries Associated With Three-Dimensional Twins In Hexagonal Metals, Shujuan Wang, Mingyu Gong, Rodney J. Mccabe, Laurent Capolungo, Jian Wang, Carlos N. Tomé

Department of Mechanical and Materials Engineering: Faculty Publications

Twinning is a critically important deformation mode in hexagonal close-packed metals. Twins are three-dimensional (3D) domains, whose growth is mediated by the motion of facets bounding the 3D twin domains and influences work hardening in metals. An understanding of twin transformations therefore necessitates that the atomic-scale structure and intrinsic mobilities of facets be known and characterized. The present work addresses the former point by systematically characterizing the boundary structures of 3D { ̄1012} twins in magnesium using high-resolution transmission electron microscopy (HRTEM). Eight characteristic facets associated with twin boundaries are reported, five of which have never been experimentally observed before. …

Fluid Mechanics Education Using Japanese Anime: Examples From “Castle In The Sky” By Hayao Miyazaki, Sangjin Ryu, Haipeng Zhang, Markeya S. Peteranetz, Tareq Daher

Department of Mechanical and Materials Engineering: Faculty Publications

Current K-12 and undergraduate student have grown up with constant exposure to visual popular culture (e.g., movies, TV programs, graphic novels, etc.). Because youth find pop culture references in the classroom to be engaging, many science and engineering instructors have shown that examples found in visual pop culture can be used to teach science and engineering concepts.1,2 One recent study on the efficay os using pop ulture for instruction found that high school studetns learning from graphic-novel styles comics acquired deeper understanding of complex subject matter and reported higher engagement with the instructional materials as compared to students learning from …

Rotating-Liquid-Based Hydrogel Bead Generator, Haipeng Zhang, Sangjin Ryu

Department of Mechanical and Materials Engineering: Faculty Publications

Hydrogel beads are widely used in various applications, but producing such beads often requires complicated devices. Instead, we propose an easy-to-adopt, cost effective, open source hydrogel bead generator. This generator consists of two modules. The first module rotates two immiscible liquids in rigid body motion: mineral oil as the continuous phase (CP) liquid on top, and a hydrogel cross-linking (CL) liquid at bottom. The second module injects a hydrogel pre-polymer solution as the dispersed phase (DP) liquid into the rotating CP liquid. As the DP liquid flows out of a syringe needle, its drops are pinched off by the shear …

Assistive Rehabilitation Elliptical System, Carl Nelson, Cale J. Stolle, Judith M. Burnfield, Thad W. Buster, Bernadette Mccrory

Department of Mechanical and Materials Engineering: Faculty Publications

An elliptical system is disclosed having a crank assembly configured to be adjusted in length to accommodate users having varying gaits. In some embodiments, the crank assembly includes a crank and an axle connection bracket that is slidably adjustable with respect to the crank. For example, the crank assembly can include a crank link having a longitudinal body, where the longitudinal body is connected to the crank at one end and includes a longitudinal slots slidably coupled with the axle connection bracket. The axle connection bracket is configured to slide through a plurality of positions along the longitudinal body. In …

Role Of Active Nanoliposomes In The Surface And Bulk Mechanical Properties Of Hybrid Hydrogels, R. Kadri, J. Bacharouch, K. Elkhoury, G. Ben Messaoud, C. Kahn, S. Desobry, M. Linder, Ali Tamayol, G. Francius, J.F. Mano, L. Sanchez-Gonzalez, E. Arab-Tehrany

Department of Mechanical and Materials Engineering: Faculty Publications

Nanoliposomes are widely used as delivery vehicles for active compounds. Nanoliposomes from rapeseed phospholipids were incorporated into interpenetrating polymer network hydrogels of gelatin methacryloyl and alginate. The multiscale physicochemical properties of the hydrogels are studied both on the surface and through the thickness of the 3D network. The obtained composite hydrogels exhibited strong mechanical properties and a highly porous surface. The blend ratio, as well as the concentration of nanoliposomes, affects the properties of the hydrogels. Nanofunctionalized hydrogels induced keratinocyte growth. These advantageous characteristics may open up many applications of the developed hydrogels in drug delivery and tissue engineering

Narrow Band Perovskite Single Crystal Photodetectors With Tunable Spectral Response, Jinsong Huang, Yanjun Fang

Department of Mechanical and Materials Engineering: Faculty Publications

Photoelectronic devices using perovskite single-crystal materials having a narrow spectral response, e.g., with a full-width-at-half-maximum response of less than about 20 nm, are provided. The response spectra are continuously (in frequency band) settable or tunable, e.g., from blue to red, by changing the halide composition and thus the band gap of the single crystals. The narrow-band response can be explained by the strong surface charge recombination of the excess carriers lose to the crystal surfaces generated by short wavelength light. The excess carriers generated by below-band gap excitation locate away from the surfaces and can be much more efficiently collect …

Crystallographic Orientation Dependence [email protected] Mechanical Responses Of Fecral Micropillars, Dongyue Xie, Binqiang Wei, Wenqian Wu, Jian Wang

Department of Mechanical and Materials Engineering: Faculty Publications

Iron-chromium-aluminum (FeCrAl) alloys are used in automobile exhaust gas purifying systems and nuclear reactors due to its superior high-temperature oxidation and excellent corrosion resistance. Single-phase FeCrAl alloys with a body centered cubic structure plastically deform through dislocation slips at room temperature. Here, we investigated the orientation dependence of mechanical responses of FeCrAl alloy through testing single-crystal and bi-crystal micropillars in a scanning electron microscopy at room temperature. Single-crystal micropillars were fabricated with specific orientations which favor the activity of single slip system or two slip systems or multiple slip systems. The strain hardening rate and flow strength increase with increasing …

Hydrogel Microphone, Li Tan, Yang Gao, Qin Zhou, Yongmei Chen

Department of Mechanical and Materials Engineering: Faculty Publications

A device includes a capacitive sensor having a hydrogel structure that includes a first surface and a second surface. A first electrode is provided at the first surface of the hydrogel structure, the first electrode including a network of conductive nanoparticles extending into the hydrogel structure. A second electrode is provided at the second surface of the hydrogel structure.

Low Velocity Impact Of Hybrid Stacked Steel Plates, H. Hadidi, R. Q. Feng, M. P. Sealy

Department of Mechanical and Materials Engineering: Faculty Publications

Designing and manufacturing high-strength, low-weight parts with enhanced impact resistance is highly sought after in the transportation industry. The most common methods to improve strength-to-weight ratios of impact targets is a composite material composition or a favorable geometric design. An alternative method to improve impact performance is functionally gradient mechanical properties in a single material by hybrid additive stacking. In this study, low-velocity impact tests were conducted on hybrid stacked 1070 steel plates where individual layers were subjected to shot peening (SP) to functionally grade mechanical properties. Hybrid additive stacking refers to secondarily processing preferential layers within a stacked build …

Challenges In Path Planning Of High Energy Density Beams For Additive Manufacturing, Karunakaran K. P, Seema Negi, Arun Nambolan, Yogesh Patil, Milan Pandya, Sajan Kapil, Dmitriy Trushnikov, Michael P. Sealy, Alain Bernard

Department of Mechanical and Materials Engineering: Faculty Publications

As there are no cutting forces in High Energy Density (HED) beams like lasers and Electron Beam (EB), their speeds are limited only by their positioning systems. On the other hand, as the entire matrix of the 3D printed part has to be addressed by the thin beam in multiple passes in multiple layers, they have to travel several kilometers in tiny motions. Therefore, the acceleration of the motion system becomes the limiting factor than velocity or precision. The authors have proposed an area-filling strategy for EB to fill the layer with optimal squares to exploit analog and hardware computing. …

Field Assessment Of Interreplicate Variability From Eight Electromagnetic Soil Moisture Sensors, Tsz Him Lo, Daran Rudnick, Jasreman Singh, Hope Njuki Nakabuye, Abia Katimbo, Derek M. Heeren, Yufeng Ge

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Interreplicate variability—the spread in output values among units of the same sensor subjected to essentially the same condition—can be a major source of uncertainty in sensor data. To investigate the interreplicate variability among eight electromagnetic soil moisture sensors through a field study, eight units of TDR315, CS616, CS655, HydraProbe2, EC5, 5TE, and Teros12 were installed at a depth of 0.30 m within 3 m of each other, whereas three units of AquaSpy Vector Probe were installed within 3 m of each other. The magnitude of interreplicate variability in volumetric water content (θ_v) was generally similar between a static …

Development And Application Of A Performance And Operational Feasibility Guide To Facilitate Adoption Of Soil Moisture Sensors, Meetpal S. Kukal, Suat Irmak, Kiran Sharma

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Soil moisture sensors can be effective and promising decision-making tools for diverse applications and audiences, including agricultural managers, irrigation practitioners, and researchers. Nevertheless, there exists immense adoption potential in the United States, with only 1.2 in 10 farms nationally using soil moisture sensors to decide when to irrigate. This number is much lower in the global scale. Increased adoption is likely hindered by lack of scientific support in need assessment, selection, suitability and use of these sensors. Here, through extensive field research, we address the operational feasibility of soil moisture sensors, an aspect which has been overlooked in the past, …

Effects Of Farrowing Stall Layout And Number Of Heat Lamps On Sow And Piglet Production Performance, Suzanne M. Leonard, Hongwei Xin, Tami M. Brown-Bandl, Brett C. Ramirez, Somak Dutta, Gary A. Rohrer

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Most farrowing facilities in the United States use stalls and heat lamps to improve sow and piglet productivity. This study investigated these factors by comparing production outcomes for three different farrowing stall layouts (traditional, expanded creep area, expanded sow area) and use of one or two heat lamps. Data were collected on 427 sows and their litters over one year. Results showed no statistical differences due to experimental treatment for any of the production metrics recorded, excluding percent stillborn. Parity one sows had fewer piglets born alive (p < 0.001), lower percent mortality (p = 0.001) and over-lay (p = 0.003), and a …

Influence Of Watershed Characteristics On Streambed Hydraulic Conductivity Across Multiple Stream Orders, Olufemi P. Abimbola, Aaron R. Mittelstet, Troy E. Gilmore, Jesse T. Korus

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Streambeds are critical hydrological interfaces: their physical properties regulate the rate, timing, and location of fluxes between aquifers and streams. Streambed vertical hydraulic conductivity (K_v) is a key parameter in watershed models, so understanding its spatial variability and uncertainty is essential to accurately predicting how stresses and environmental signals propagate through the hydrologic system. Most distributed modeling studies use generalized K_v estimates from column experiments or grain-size distribution, but K_v may include a wide range of orders of magnitude for a given particle size group. Thus, precisely predicting K_v spatially has remained conceptual, experimental, …

Cover Crop Productivity And Subsequent Soybean Yield In The Western Corn Belt, Katja Koehler-Cole, Roger W. Elmore, Humberto Blanco-Canqui, Charles A. Francis, Charles Shapiro, Christopher A. Proctor, Sabrina J. Ruis, Derek M. Heeren, Suat Irmak, Richard Ferguson

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Cover crops (CC) in corn (Zea mays L.) and soybean [Glycine max (L.) Merr.] rotations may prevent N loss and provide other ecosystem services but CC productivity in the western Corn Belt is limited by the short growing season. Our objective was to assess CC treatment and planting practice effects on CC biomass, spring soil nitrate concentrations, and soybean yield at two rainfed sites in eastern and one irrigated site in south-central Nebraska over 4 years. Cover crop treatments (cereal rye [Secale cereale L.] [RYE] and a mix of rye, legume, and brassica species [MIX]) were planted …

Calibration Of A Common Shortwave Multispectral Camera System For Quantitative Agricultural Applications, J. Burdette Barker, Wayne Woldt, Brian Wardlow, Christopher Michael Usher Neale, Mitchell S. Maguire, Bryan Leavitt, Derek M. Heeren

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Unmanned aerial systems (UAS) for collecting multispectral imagery of agricultural fields are becoming more affordable and accessible. However, there is need to validate calibration of sensors on these systems when using them for quantitative analyses such as evapotranspiration, and other modeling for agricultural applications. The results of laboratory testing of a MicaSense (Seattle, WA, USA) RedEdge™ 3 multispectral camera and MicaSense Downwelling Light Sensor (irradiance sensor) system using a calibrated integrating sphere were presented. Responses of the camera and irradiance sensor were linear over many light levels and became non-linear at light levels below expected real-world, field conditions. Simple linear …

High-Throughput Screening Of Clinically Approved Drugs That Prime Nonviral Gene Delivery To Human Mesenchymal Stem Cells, Tyler Kozisek, Andrew Hamann, Albert Nguyen, Michael Miller, Sarah Plautz, Angela K. Pannier

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Background: Human mesenchymal stem cells (hMSCs) are intensely researched for applications in cell therapeutics due to their unique properties, however, intrinsic therapeutic properties of hMSCs could be enhanced by genetic modification. Viral transduction is efficient, but suffers from safety issues. Conversely, nonviral gene delivery, while safer compared to viral, suffers from inefficiency and cytotoxicity, especially in hMSCs. To address the shortcomings of nonviral gene delivery to hMSCs, our lab has previously demonstrated that pharmacological ‘priming’ of hMSCs with the glucocorticoid dexamethasone can significantly increase transfection in hMSCs by modulating transfection-induced cytotoxicity. This work seeks to establish a library of transfection …

Deep Learning Predicts Microbial Interactions From Self-Organized Spatiotemporal Patterns, Joon-Yong Lee, Natalie C. Sadler, Robert G. Egbert, Christopher R. Anderton, Kirsten S. Hofmockel, Janet K. Jansson, Hyun-Seob Song

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Microbial communities organize into spatial patterns that are largely governed by interspecies interactions. This phenomenon is an important metric for understanding community functional dynamics, yet the use of spatial patterns for predicting microbial interactions is currently lacking. Here we propose supervised deep learning as a new tool for network inference. An agent-based model was used to simulate the spatiotemporal evolution of two interacting organisms under diverse growth and interaction scenarios, the data of which was subsequently used to train deep neural networks. For small-size domains (100 mm x 100 mm) over which interaction coefficients are assumed to be invariant, we …

Swine Slurry Characteristics As Affected By Selected Additives And Disinfectants, Jon Duerschner, Shannon L. Bartelt-Hunt, Kent Eskridge, John E. Gilley, Xu Li, Amy M. Schmidt, Daniel D. Snow

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Current swine industry practice is to house animals in confinement facilities which capture and store feces and urine as slurry in pits below the production area. Additives and disinfectants may be introduced into the manure pits. This study was conducted to measure the effects of additives and disinfectants on temporal changes in swine slurry characteristics. Slurry from a commercial swine production facility in southeast Nebraska, USA was collected and transferred to 57 L reactors located within a greenhouse. Selected additives and disinfectants were added to the reactors and physical properties, chemical characteristics, and antibiotic concentrations were monitored for 40 days. …

Influence Of Setback Distance On Antibiotics And Antibiotic Resistance Genes In Runoff And Soil Following The Land Application Of Swine Manure Slurry, Maria C. Hall, Noelle Mware, John E. Gilley, Shannon L. Bartelt-Hunt, Daniel D. Snow, Amy M. Schmidt Schmidt, Kent M. Eskridge, Xu Li

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The environmental spread of antibiotics and antibiotic resistance genes (ARGs) from the land application of livestock wastes can be a potential public health threat. The objective of this study was to assess the effects of setback distance, which determines how close manure may be applied in relation to surface water, on the transport of antibiotics and ARGs in runoff and soil following land application of swine manure slurry. Rainfall simulation tests were conducted on field plots covered with wheat residues, each of which contained an upslope manure region where slurry was applied and an adjacent downslope setback region that did …

Geostatistical Features Of Streambed Vertical Hydraulic Conductivities In Frenchman Creek Watershed In Western Nebraska, Olufemi P. Abimbola, Aaron R. Mittelstet, Troy E. Gilmore

Department of Agricultural and Biological Systems Engineering: Faculty Publications

This study evaluated the spatial variability of streambed vertical hydraulic conductivity (K_v) in different stream morphologies in the Frenchman Creek Watershed, Western Nebraska, using different variogram models. Streambed K_v values were determined in situ using permeameter tests at 10 sites in Frenchman, Stinking Water and Spring Creeks during the dry season at baseflow conditions. Measurements were taken both in straight and meandering stream channels during a 5 day period at similar flow conditions. Each test site comprised of at least three transects and each transect comprised of at least three K_v measurements. Linear, Gaussian, exponential …