Engineering Commons^™

Nanostructured Arrays For Sensing And Energy Storage Applications, Raghu Mangu

University of Kentucky Doctoral Dissertations

Vertically aligned multi walled carbon nanotube (MWCNT) arrays fabricated by xylene pyrolysis in anodized aluminum oxide (AAO) templates without the use of a catalyst, were integrated into a resistive sensor design. The steady state sensitivities as high as 5% and 10% for 100 ppm of NH₃ and NO₂ respectively at a flow rate of 750 sccm were observed. A study was undertaken to elucidate (i) the dependence of sensitivity on the thickness of amorphous carbon layers, (ii) the effect of UV light on gas desorption characteristics and (iii) the dependence of room temperature sensitivity on different NH_{3 …}

A Multi-Stage Decision Support Model For Coordinated Sustainable Product And Supply Chain Design, Haritha Metta

University of Kentucky Doctoral Dissertations

In this research, a decision support model for coordinating sustainable product and supply chain design decisions is developed using a multi-stage hierarchical approach. The model evaluates alternate product designs and their corresponding supply chain configurations to identify the best product design and the corresponding supply chain configuration that maximizes the economic, environmental and societal benefits. The model considers a total life-cycle approach and incorporates closed-loop flow among multiple product lifecycles. In the first stage, a mixed integer linear programming model is developed to select for each product design an optimal supply chain configuration that maximizes the profit. In the subsequent …

Zinc Speciation In Power Plant Burning Mixtures Of Coal And Tires, Luis F.O. Silva, Marcos L.S. Oliveira, Carmen Serra, James C. Hower

Coal Combustion and Gasification Products Journal Archive

Fly ash from the cyclone-boiler co-combustion of high-S, high volatile bituminous coal and tire-derived fuel (tdf) was studied using a variety of chemical, optical, and microbeam techniques. Fly ash, dominated by Al-Si glass with lesser amounts of coalderived carbons, Fe-spinels, and tire-derived carbons, has Zn concentrations ranging from 2200 ppm (1st ESP row) to 6900 ppm Zn (3rd ESP row). Zinc occurs in Zn-rich nanoparticles in the Al-Si glass phases and as ZnO in amorphous and crystalline nanominerals, Fe- and Zn-sulfides, Pb-Al-Fe sulfates, and Zn sulfates. Iron-rich, Al- and Ti-bearing spinels contain accessory Zn2+,Cr3+,Mn2+, and Pb2+. Fe-sulfates and phosphates nanoparticles …

Co-Disposal Of Dry Fgd By-Product With Coal Gasification Ash And Inorganic Brines, Jabulani S. Mahlaba, P.C. Pretorius, Subal Maharajh, M.P. Augustyn

Coal Combustion and Gasification Products Journal Archive

There is a growing pressure from the environmental authorities and public bodies to reduce anthropogenic pollution. Stringent environmental legislation is being implemented for industries around the world, even more so for coal consuming industries. Control of gaseous emissions is one of the areas that are receiving considerable attention towards sustainable development. Coal combustion in coal-fired power utilities emits SO~x~ to the atmosphere. Dry flue gas desulphurisation (FGD) is a well known technology often used to mitigate sulphur emissions in coal-fired power utilities. It traditionally uses lime to neutralise SO~x~, and forms a mixture of anhydrite (CaSO~4~), and calcium sulphite (CaSO~3~). …

A Multi-Analytical Approach To Understand The Chemistry Of Fe-Minerals In Feed Coals And Ashes, Marcos L.S. Oliveira, Frans Waanders, Luis F.O. Silva, Andre Jasper, Carlos H. Sampaio, Dursman Mchabe, Rachel S. Hatch, James C. Hower

Coal Combustion and Gasification Products Journal Archive

Seven feed coals used in the Brazilian power generation industry were obtained and subsequently analysed together with fly ash and bottom ash from a major Brazilian power plant. The samples were investigated by means of room temperature FeMo¨ssbauer analyses, X-ray diffraction, Raman spectroscopy, scanning electron microscope and petrographic analysis. In addition, nanometer-sized crystalline phases in coals and ashes were characterised using an energy-dispersive X-ray spectrometer and a high-resolution transmission electron microscope. The major identified Fe-bearing minerals in the coals were found to be actinolite, ankerite, chalcopyrite, chlorite, goethite, illite, ilmenite, magnesioferrite, natrojarosite, pyrite, pyrrhotite, and siderite; whilst in the fly …

Compositional Variations In Pilot Gasifier And Laboratory-Produced Slags And Their Impacts On Slag Viscosity And Coal Assessment, Alexander Ilyushechkin, Daniel Roberts, David Harris

Coal Combustion and Gasification Products Journal Archive

The flow behaviour of coal mineral matter at high temperatures is an important parameter for coal use in entrained-flow gasification technologies. Recently, gasification performance data was obtained from a series of pilot-scale gasification tests on a suite of well-characterised Australian black coals. Evaluation of the results of the pilot tests and the detailed laboratory investigations provided the opportunity for evaluation of the practical applicability of different laboratory and modelling techniques for coal assessment in terms of mineral matter behaviour in entrained flow gasification. A series of viscosity measurements was made over the range 1200–1600uC using slags produced in a pilot …

Compaction Of High-Ca Fly Ash-Al- And Al-Alloy-Composites: Evaluation Of Their Microstructure And Tribological Performance, Grigorios Itskos, Angeliki Moutsatsou, Pradeep K. Rohatgi, Nikolaos Koukouzas, Charalampos Vasilatos, Eleni Katsika

Coal Combustion and Gasification Products Journal Archive

In this study, highly calcareous and siliceous fly ash particles were utilized for the fabrication of Al- and Al-alloy-based MetalMatrix Composites (MMCs) by means of powder metallurgy. After compacting and sintering Al and Al/Si powders containing 10, 15, and 20wt. % ash particles, the homogenous (and with minimal amount of voids) microstructure of the produced composites was verified by means of Scanning Electron Microscopy (SEM). The composites were tested for their dry sliding wear behavior using a pin-on-disc machine against spheres of alumina. The worn surfaces of composites were then examined by using SEM and Energy Dispersive X-Ray Spectroscopy (EDS). …

Influence Of Chemical Reagents On Rheological Properties Of Fly Ash-Water Slurry At Varying Temperature Environment, H.K. Nail, M.K. Mishra, Karanam U.M. Rao

Coal Combustion and Gasification Products Journal Archive

About 70% of total electrical energy is generated from thermal power plants in India which in turn release about 160 Mt of fly ash as solid waste annually. Transportation and disposal of such a huge amount of fly ash is a major problem faced by the power plants. Presently fly ash is transported as lean slurry in pipe lines requiring about 80 to 85% of water with high energy input. A major impediment in high volume transportation of fly ash is its high specific gravity as compared to that of water. The objective of the present study was to evaluate …

Impact Of Manufactured Coal Ash Aggregates On Water Quality During Open Pit Restoration: 1. A Statistical Screening Test, Sangchul Hwang, Isomar Latorre

Coal Combustion and Gasification Products Journal Archive

Utilization of manufactured coal ash aggregates (MAs) as a subsoil substitute during restoration of an open pit was assessed in a three-factor, two-level factorial analysis. The factors of interest were the MA application rate (2:1 or 1:2 topsoil/MA volume ratio), rainfall intensity (high or low), and aggregate size (2.36–4.75 mm or 4.75–9.53 mm). Among the water quality parameters examined (pH, turbidity, heavy metal content (lead and cadmium), conductivity, and hardness), the last two parameters were significantly higher (p,0.05) in soil amended with MAs than in a control reactor using sand. A low rainfall intensity and larger aggregate size resulted in …

The Leachability Of Major Elements At Different Stages Of Weathering In Dry Disposed Coal Fly Ash, S.A. Akinyemi, A. Akinlua, W.M. Gitari, R.O. Akinyeye, L.F. Petrik

Coal Combustion and Gasification Products Journal Archive

Large quantities of solid residue are generated by coal-fired power stations in many parts of the World. The disposal and management of the unused fly ash remains a major problem to the environment. The weathered dry disposed ash cores comprise of major element constituents such as Al, Si, Ca, Mg, Fe, Mn, Na+ and K+. The mobility patterns and mineralogical associations of major elements in weathered dry disposed ash dumps aged 1-year-old, 8-year-old and 20-year-old from a coalfired power station in South Africa were investigated using a modified sequential extraction scheme. The extraction sequence was as follows: (1) water soluble, …

Kentucky Water Resources Research Institute Annual Technical Report Fy 2010, Kentucky Water Resources Research Institute, University Of Kentucky

KWRRI Annual Technical Reports (USGS’s 104b Grant Program)

The 2010 Annual Technical Report for Kentucky consolidates reporting requirements for the Section 104(b) base grant award into a single document that includes: 1) a synopsis of each research project that was conducted during the period, 2) citations for related publications, reports, and presentations, 3) a description of information transfer activities, 4) a summary of student support during the reporting period, and 5) notable awards and achievements during the year.

New Accurate Fault Location Algorithm For Parallel Transmission Lines, Pramote Chaiwan

University of Kentucky Doctoral Dissertations

Electric power systems have been in existence for over a century. Electric power transmission line systems play an important role in carrying electrical power to customers everywhere. The number of transmission lines in power systems is increasing as global demand for power has increased. Parallel transmission lines are widely used in the modern transmission system for higher reliability. The parallel lines method has economic and environmental advantages over single circuit. A fault that occurs on a power transmission line will cause long outage time if the fault location is not located as quickly as possible. The faster the fault location …

Evaluating The Effectiveness Of Peak Power Tracking Technologies For Solar Arrays On Small Spacecraft, Daniel Martin Erb

University of Kentucky Master's Theses

The unique environment of CubeSat and small satellite missions allows certain accepted paradigms of the larger satellite world to be investigated in order to trade performance for simplicity, mass, and volume. Peak Power Tracking technologies for solar arrays are generally implemented in order to meet the End-of-Life power requirements for satellite missions given radiation degradation over time. The short lifetime of the generic satellite mission removes the need to compensate for this degradation. While Peak Power Tracking implementations can give increased power by taking advantage and compensating for the temperature cycles that solar cells experience, this comes at the expense …

Kentucky Traffic Collision Facts 2011 Report, Kentucky Transportation Center, Kentucky State Police

Kentucky Transportation Center Research Report

KENTUCKY’S TRAFFIC COLLISION FACTS report for 2011 is based on collision reports submitted to the Kentucky State Police Records Branch. As required by Kentucky Revised Statutes 189.635, “every law enforcement agency whose officers investigate a vehicle accident of which a report must be made...shall file a report of the accident...within ten days after investigation of the accident upon forms supplied by the bureau.” The stated purpose of this requirement is to utilize data on traffic collisions for such purposes as will improve the traffic safety program in the Commonwealth. Data contained in this report are based solely on the observations …

Correlation Between Alternans Of Early And Late Phases Of Ventricular Action Potential, Sonam Chourasia

Theses and Dissertations--Biomedical Engineering

Several studies suggest that action potential duration (APD) alternans play an important role in initiation of arrhythmias, while less is known about the alternans of early phases of action potential (AP) and phase relation between the two. Transmembrane potentials recorded from swine and canine ventricles were analyzed to determine the correlation and phase relation between alternans of early and late phases of an AP. In both species, for activation intervals ≤ 400 ms, action potential amplitude (APA) alternans occurred≥ 50% of times when APD alternans occurred and vice versa, both were mostly in phase. Also, alternans of APA and APD …

Understanding And Improving Lithium Ion Batteries Through Mathematical Modeling And Experiments, Rutooj D. Deshpande

Theses and Dissertations--Chemical and Materials Engineering

There is an intense, worldwide effort to develop durable lithium ion batteries with high energy and power densities for a wide range of applications, including electric and hybrid electric vehicles. For improvement of battery technology understanding the capacity fading mechanism in batteries is of utmost importance. Novel electrode material and improved electrode designs are needed for high energy- high power batteries with less capacity fading. Furthermore, for applications such as automotive applications, precise cycle-life prediction of batteries is necessary.

One of the critical challenges in advancing lithium ion battery technologies is fracture and decrepitation of the electrodes as a result …

Investigations Of Cuinte2 / Cds & Cdte / Cds Heterojunction Solar Cells, Venkatesh Gutta

University of Kentucky Master's Theses

Thin film solar cells of Copper Indium Telluride and Cadmium Sulfide junctions were fabricated on plain ITO glass slides and also on those coated with intrinsic Tin Oxide. CdS was deposited through chemical bath deposition and CIT by electrodeposition. Both compounds were subjected to annealing at temperatures between 350°C and 500°C which produced more uniform film thicknesses and larger grain sizes. The CIT/ CdS junction was characterized after performing XRD and spectral absorption of individual compounds.

Studies were also made on CdS / CdTe solar cells with respect to effect of annealing temperatures on open circuit voltages. NP acid etch, …

Fabrication Of Mwcnt Based Gas Sensor Using Site-Selective Growth Of Nanotubes On Gold Patterned Silicon Oxide Substrate, Srikanth Durgamahanty

University of Kentucky Master's Theses

Growth confinement techniques for multi walled carbon nanotubes on Au/SiO₂ surfaces was studied and incorporated into a gas sensor design. A device framework was conceived and a sensor was built to achieve this structure. The fabrication results were analyzed using scanning electron microscopy which confirmed the achievement of highly site-selective growth of carbon nanotubes, exclusively between the interdigitated electrodes. The sensor was then evaluated for its capacitance and conductance response when exposed to NO₂ gas. Variation in sensitivities with frequency and flow rate were analyzed. A mathematical model was derived for such a device structure and the predictions …

Effect Of A Silicon Tip On Absorption Cross Section, Field Enhancement, And Localized Surface Plasmon Resonance Of Different Sized Gold Nanoparticles Under Evanescent Wave Illumination, Gazi Mostafa Huda

University of Kentucky Master's Theses

We have numerically investigated the influence of a nanoscale silicon tip in proximity to an illuminated gold nanoparticle. We describe how the position of the high-permittivity tip and the size of a nanoparticle impact the absorption, peak electric field and surface plasmon resonance wavelength under different illumination conditions. We detail the finite element method (FEM) approach we have used for this, whereby we specify a volume excitation field analytically and calculate the difference between this source field and the total field (i.e., scattered-field formulation). We show that a nanoscale tip can locally enhance the absorption of the particle as well …

Rotate And Hold And Scan (Rahas): Structured Light Illumination For Use In Remote Areas, Eli Ross Crane

University of Kentucky Master's Theses

As a critical step after the discovery of material culture in the field, archaeologists have a need to document these findings with a slew of different physical measurements and photographs from varying perspectives. 3-D imaging is becoming increasingly popular as the primary documenting method to replace the plethora of tests and measurements, but for remote areas 3-D becomes more cumbersome due to physical and environmental constraints. The difficulty of using a 3-D imaging system in such environments is drastically lessened while using the RAHAS technique, since it acquires scans untethered to a computer. The goal of this thesis is to …

Mathematical Modeling Of Clostridium Thermocellum’S Metabolic Responses To Environmental Perturbation, Bless Adotey

Theses and Dissertations--Biosystems and Agricultural Engineering

Clostridium thermocellum is a thermophilic anaerobe that is capable of producing ethanol directly from lignocellulosic compounds, however this organism suffers from low ethanol tolerance and low ethanol yields. In vivo mathematical modeling studies based on steady state traditional metabolic flux analysis, metabolic control analysis, transient and steady states’ flux spectrum analysis (FSA) were conducted on C. thermocellum’s central metabolism. The models were developed in Matrix Laboratory software ( MATLAB^® (The Language of Technical Computing), R2008b, Version 7.7.0.471)) based on known stoichiometry from C. thermocellum pathway and known physical constraints. Growth on cellobiose from Metabolic flux analysis (MFA) and Metabolic …

Viability Of A Controllable Chaotic Micromixer Through The Use Of Titanium-Nickel Shape Memory Alloy, David Ryan Lilly

Theses and Dissertations--Mechanical and Aerospace Engineering

Microfluidic devices have found applications in a number of areas, such as medical analysis, chemical synthesis, biological study, and drug delivery. Because of the small channel dimensions used in these systems, most microchannels exhibit laminar flow due to their low Reynold’s number, making mixing of fluids very challenging. Mixing at this size scale is diffusion-limited, so inducing chaotic flow patterns can increase the interface surface area between two fluids, thereby decreasing overall mixing time.

One method to create a chaotic flow within the channel is through the introduction of internal protrusions into the channel. In such an application protrusions that …

Evaluating Algal Growth At Different Temperatures, Keelin Owen Cassidy

Theses and Dissertations--Biosystems and Agricultural Engineering

In recent years, there has been a concern for the amount of carbon dioxide released into the atmosphere and how it will be captured. One way to capture carbon dioxide is with algae. In this study, algae's growth was measured at different temperatures. The first part of the study was to grow Scenedesmus and Chlorella with M8 or urea growth media at a temperature of 25, 30 or 35ºC. It was found that 30ºC had the best growth rates for both algae. The second part studied Scenedesmus growth with urea, more in-depth, and found the optimum growth temperature to be …

Robust Statistical Methods For Non-Normal Quality Assurance Data Analysis In Transportation Projects, Mohammad Moin Uddin

University of Kentucky Doctoral Dissertations

The American Association of Highway and Transportation Officials (AASHTO) and Federal Highway Administration (FHWA) require the use of the statistically based quality assurance (QA) specifications for construction materials. As a result, many of the state highway agencies (SHAs) have implemented the use of a QA specification for highway construction. For these statistically based QA specifications, quality characteristics of most construction materials are assumed normally distributed, however, the normality assumption can be violated in several forms. Distribution of data can be skewed, kurtosis induced, or bimodal. If the process shows evidence of a significant departure from normality, then the quality measures …

High Performance Piezoelectric Materials And Devices For Multilayer Low Temperature Co-Fired Ceramic Based Microfluidic Systems, Wenli Zhang

University of Kentucky Doctoral Dissertations

The incorporation of active piezoelectric elements and fluidic components into micro-electromechanical systems (MEMS) is of great interest for the development of sensors, actuators, and integrated systems used in microfluidics. Low temperature cofired ceramics (LTCC), widely used as electronic packaging materials, offer the possibility of manufacturing highly integrated microfluidic systems with complex 3-D features and various co-firable functional materials in a multilayer module. It would be desirable to integrate high performance lead zirconate titanate (PZT) based ceramics into LTCC-based MEMS using modern thick film and 3-D packaging technologies. The challenges for fabricating functional LTCC/PZT devices are: 1) formulating piezoelectric compositions which …

Mechanical Characterizations Of Environmentally Conditioned Shape Memory Polymers For Reconfigurable Aerospace Structures, Jared T. Fulcher

University of Kentucky Master's Theses

Shape memory polymers (SMPs) have been candidate materials for morphing applications. However, the SMPs have not been fully tested to work in relevant environments required for Air Force missions. In this study, an epoxy-based SMP was separately exposed to moisture, lubricating oil and UV radiation, which are simulated service environments designed to be reflective of anticipated performance requirements. The thermomechanical properties and shape memory effects were studied by using novel high-temperature nanoindentation technique. Results show that environmental conditions have affected the glass transition temperature and mechanical properties of the SMPs. In most cases, the conditioned SMPs exhibited higher elastic moduli …

Artificial Neural Network Based Fault Location For Transmission Lines, Suhaas Bhargava Ayyagari

University of Kentucky Master's Theses

This thesis focuses on detecting, classifying and locating faults on electric power transmission lines. Fault detection, fault classification and fault location have been achieved by using artificial neural networks. Feedforward networks have been employed along with backpropagation algorithm for each of the three phases in the Fault location process. Analysis on neural networks with varying number of hidden layers and neurons per hidden layer has been provided to validate the choice of the neural networks in each step. Simulation results have been provided to demonstrate that artificial neural network based methods are efficient in locating faults on transmission lines and …

Sensing Characteristics Of Multiwalled Carbon Nanotube (Mwcnt) Sensors Embedded In Porous Alumina Membranes, Swetha Sree Nimmagadda

Theses and Dissertations--Electrical and Computer Engineering

A theoretical model is developed for calculating the sensitivity of resistive sensors based on aligned multiwall carbon nanotubes (MWCNT) embedded in the pores of alumina membranes. Aligned MWCNTs offer more surface area as each CNT acts as a landing site for detecting gas species. The MWCNTs behave as a p-type semiconducting layer; when the bus bar contacts are placed at either end of the top surface the resistance between the contacts responds to oxidizing (resistance decreases) and reducing gases (resistance increases). The model presented in this thesis aims to understand the device resistance dependence upon the MWCNT resistance, and the …

Control Of Metal Transfer At Given Arc Variables, Yi Huang

Theses and Dissertations--Electrical and Computer Engineering

Gas Metal Arc Welding (GMAW) is one of the most important welding processes in industrial application. To control metal transfer at given variables is a focus in the field of research and development in welding community.

In this dissertation, laser enhanced GMAW is proposed and developed by adding a lower power laser onto the droplet to generate an auxiliary detaching force. The electromagnetic force needed to detach droplets, thus the current that determines this force, is reduced. Wire feed speed, arc voltage, and laser intensity were identified as three major parameters that affect the laser enhanced metal transfer process and …

Camera Planning And Fusion In A Heterogeneous Camera Network, Jian Zhao

Theses and Dissertations--Electrical and Computer Engineering

Wide-area camera networks are becoming more and more common. They have widerange of commercial and military applications from video surveillance to smart home and from traffic monitoring to anti-terrorism. The design of such a camera network is a challenging problem due to the complexity of the environment, self and mutual occlusion of moving objects, diverse sensor properties and a myriad of performance metrics for different applications. In this dissertation, we consider two such challenges: camera planing and camera fusion. Camera planning is to determine the optimal number and placement of cameras for a target cost function. Camera fusion describes the …