Engineering Commons^™

Automated Network Security With Exceptions Using Sdn, Sergio A. Rivera Polanco

Theses and Dissertations--Computer Science

Campus networks have recently experienced a proliferation of devices ranging from personal use devices (e.g. smartphones, laptops, tablets), to special-purpose network equipment (e.g. firewalls, network address translation boxes, network caches, load balancers, virtual private network servers, and authentication servers), as well as special-purpose systems (badge readers, IP phones, cameras, location trackers, etc.). To establish directives and regulations regarding the ways in which these heterogeneous systems are allowed to interact with each other and the network infrastructure, organizations typically appoint policy writing committees (PWCs) to create acceptable use policy (AUP) documents describing the rules and behavioral guidelines that all campus network …

Relation Prediction Over Biomedical Knowledge Bases For Drug Repositioning, Mehmet Bakal

Theses and Dissertations--Computer Science

Identifying new potential treatment options for medical conditions that cause human disease burden is a central task of biomedical research. Since all candidate drugs cannot be tested with animal and clinical trials, in vitro approaches are first attempted to identify promising candidates. Likewise, identifying other essential relations (e.g., causation, prevention) between biomedical entities is also critical to understand biomedical processes. Hence, it is crucial to develop automated relation prediction systems that can yield plausible biomedical relations to expedite the discovery process. In this dissertation, we demonstrate three approaches to predict treatment relations between biomedical entities for the drug repositioning task …

Depth Enhancement And Surface Reconstruction With Rgb/D Sequence, Xinxin Zuo

Theses and Dissertations--Computer Science

Surface reconstruction and 3D modeling is a challenging task, which has been explored for decades by the computer vision, computer graphics, and machine learning communities. It is fundamental to many applications such as robot navigation, animation and scene understanding, industrial control and medical diagnosis. In this dissertation, I take advantage of the consumer depth sensors for surface reconstruction. Considering its limited performance on capturing detailed surface geometry, a depth enhancement approach is proposed in the first place to recovery small and rich geometric details with captured depth and color sequence. In addition to enhancing its spatial resolution, I present a …

Study Of Factors Affecting Distribution System Pv Hosting Capacity, Fanxun Li

Theses and Dissertations--Electrical and Computer Engineering

As renewable energy plays an increasingly important role in the power system, the addition of PV systems to the distribution network has become a major trend in the current power system development. However, if a PV system with excessive capacity is added to the distribution network, voltage problems may occur in the system. Hence, it is important to determine the capacity of the PV system that can be added at the distribution system.

The thesis aims to identify the major factors that affect the PV hosting capacity of distribution systems. The thesis studies various scenarios for the IEEE-123 test network …

Performance Validation Of A Multi-Channel Lidar Sensor: Assessing The Effects Of Target Height And Sensor Velocity On Measurement Error, Surya S. Dasika, Michael P. Sama, L. Felipe Pampolini, Christopher B. Good

Biosystems and Agricultural Engineering Faculty Publications

The objective of this study was to determine the effects of sensor velocity and target height above ground level on height measurement error when using a multi-channel LiDAR sensor. A linear motion system was developed to precisely control the dynamics of the LiDAR sensor in an effort to remove uncertainty in the LiDAR position and velocity while under motion. The linear motion system allowed the LiDAR to translate forward and backward in one direction parallel to the ground. A user control interface was developed to operate the system under different velocity profiles and to log LiDAR data synchronous to the …

Procure-To-Pay Software In The Digital Age: An Exploration And Analysis Of Efficiency Gains And Cybersecurity Risks In Modern Procurement Systems, Drew Lane

MPA/MPP/MPFM Capstone Projects

Procure-to-Pay (P2P) softwares are an integral part of the payment and procurement processing functions at large-scale governmental institutions. These softwares house all of the financial functions related to procurement, accounts payable, and often human resources, helping to facilitate and automate the process from initiation of a payment or purchase, to the actual disbursal of funds. Often, these softwares contain budgeting and financial reporting tools as part of the offering. As such an integral part of the financial process, these softwares obviously come at an immense cost from a set of reputable vendors. In the case of government, these vendors mainly …

Mathematical Programming Approach For The Design Of Satellite Power Systems, Allen Flath Iii

Theses and Dissertations--Electrical and Computer Engineering

Satellite power systems can be understood as islanded dc microgrids supplied by specialized and coordinated solar cell arrays augmented by electrochemical battery systems to handle high-power loads and periods of eclipse. The periodic availability of power, the limited capacity of batteries, and the dependence of all mission service on power consumption create a unique situation in which temporal power and energy scarcity exist. A multi-period model of an orbital satellite power system’s performance over a mission’s duration can be constructed. A modular power system architecture is used to characterize the system’s constraints. Using mathematical programming, an optimization problem can be …

Estimation Of Transmission Line Parameters Using Linear Method With Synchronized And Unsynchronized Data, Mustafa Lahmar

Theses and Dissertations--Electrical and Computer Engineering

Accurate value of transmission line parameters is important for power system protection applications, especially for distance relays whose zone settings are based on positive sequence line impedance. The research is devoted to estimating transmission line positive-sequence parameters from synchronized or unsynchronized measurements of voltage and current phasors that are obtained at both terminals of the line. The positive sequence parameters including series impedance and shunt admittance can be linearly estimated. The linear least square algorithm has been derived in this dissertation for different transmission line configurations. The algorithm is able to handle both synchronized and unsynchronized measurements and deal with …

Weld Penetration Identification Based On Convolutional Neural Network, Chao Li

Theses and Dissertations--Electrical and Computer Engineering

Weld joint penetration determination is the key factor in welding process control area. Not only has it directly affected the weld joint mechanical properties, like fatigue for example. It also requires much of human intelligence, which either complex modeling or rich of welding experience. Therefore, weld penetration status identification has become the obstacle for intelligent welding system. In this dissertation, an innovative method has been proposed to detect the weld joint penetration status using machine-learning algorithms.

A GTAW welding system is firstly built. Project a dot-structured laser pattern onto the weld pool surface during welding process, the reflected laser pattern …

Optimal Distribution Feeder Reconfiguration With Distributed Generation Using Intelligent Techniques, Ahmad Ghaweta

Theses and Dissertations--Electrical and Computer Engineering

Feeder reconfiguration is performed by changing the open/close status of two types of switches: normally open tie switches and normally closed sectionalizing switches. A whole feeder or part of a feeder may be served from another feeder by closing a tie switch linking the two while an appropriate sectionalizing switch must be opened to maintain the radial structure of the system. Feeder reconfiguration is mainly aiming to reduce the system overall power losses and improve voltage profile. In this dissertation, several approaches have been proposed to reconfigure the radial distribution networks including the potential impact of integrating Distributed Energy Resources …

T-Count Optimization Of Quantum Carry Look-Ahead Adder, Vladislav Ivanovich Khalus

Theses and Dissertations--Electrical and Computer Engineering

With the emergence of quantum physics and computer science in the 20^th century, a new era was born which can solve very difficult problems in a much faster rate or problems that classical computing just can't solve. In the 21^st century, quantum computing needs to be used to solve tough problems in engineering, business, medical, and other fields that required results not today but yesterday. To make this dream come true, engineers in the semiconductor industry need to make the quantum circuits a reality.

To realize quantum circuits and make them scalable, they need to be fault tolerant, …

Curricular Optimization: Solving For The Optimal Student Success Pathway, William G. Thompson-Arjona

Theses and Dissertations--Electrical and Computer Engineering

Considering the significant investment of higher education made by students and their families, graduating in a timely manner is of the utmost importance. Delay attributed to drop out or the retaking of a course adds cost and negatively affects a student’s academic progression. Considering this, it becomes paramount for institutions to focus on student success in relation to term scheduling.

Often overlooked, complexity of a course schedule may be one of the most important factors in whether or not a student successfully completes his or her degree. More often than not students entering an institution as a first time full …

Advanced Fault Area Identification And Fault Location For Transmission And Distribution Systems, Wen Fan

Theses and Dissertations--Electrical and Computer Engineering

Fault location reveals the exact information needed for utility crews to timely and promptly perform maintenance and system restoration. Therefore, accurate fault location is a key function in reducing outage time and enhancing power system reliability.

Modern power systems are witnessing a trend of integrating more distributed generations (DG) into the grid. DG power outputs may be intermittent and can no longer be treated as constants in fault location method development. DG modeling is also difficult for fault location purpose. Moreover, most existing fault location methods are not applicable to simultaneous faults. To solve the challenges, this dissertation proposes three …

Fast, Sparse Matrix Factorization And Matrix Algebra Via Random Sampling For Integral Equation Formulations In Electromagnetics, Owen Tanner Wilkerson

Theses and Dissertations--Electrical and Computer Engineering

Many systems designed by electrical & computer engineers rely on electromagnetic (EM) signals to transmit, receive, and extract either information or energy. In many cases, these systems are large and complex. Their accurate, cost-effective design requires high-fidelity computer modeling of the underlying EM field/material interaction problem in order to find a design with acceptable system performance. This modeling is accomplished by projecting the governing Maxwell equations onto finite dimensional subspaces, which results in a large matrix equation representation (Zx = b) of the EM problem. In the case of integral equation-based formulations of EM problems, the M-by-N system matrix, Z, …

Fault Location Techniques Using The Traveling Wave Method And The Discrete Wavelet Transform, Wesley Fluty

Theses and Dissertations--Electrical and Computer Engineering

Fault location within electric power systems is an important topic that helps reduce outage duration and increases reliability of the system. This paper explores the topic of fault location using traveling waves generated by fault conditions and the discrete wavelet transform used for time-frequency analysis. The single-ended and double-ended traveling wave methods are presented and evaluated on a single circuit and double circuit 500kV system modeled using MATLAB SIMULINK. Results are compared on the basis of wavelet used for analysis, sampling rate, and fault resistance.

Spatial Augmented Reality Using Structured Light Illumination, Ying Yu

Theses and Dissertations--Electrical and Computer Engineering

Spatial augmented reality is a particular kind of augmented reality technique that uses projector to blend the real objects with virtual contents. Coincidentally, as a means of 3D shape measurement, structured light illumination makes use of projector as part of its system as well. It uses the projector to generate important clues to establish the correspondence between the 2D image coordinate system and the 3D world coordinate system. So it is appealing to build a system that can carry out the functionalities of both spatial augmented reality and structured light illumination.

In this dissertation, we present all the hardware platforms …

Optimum Design Of Axial Flux Pm Machines Based On Electromagnetic 3d Fea, Narges Taran

Theses and Dissertations--Electrical and Computer Engineering

Axial flux permanent magnet (AFPM) machines have recently attracted significant attention due to several reasons, such as their specific form factor, potentially higher torque density and lower losses, feasibility of increasing the number of poles, and facilitating innovative machine structures for emerging applications. One such machine design, which has promising, high efficiency particularly at higher speeds, is of the coreless AFPM type and has been studied in the dissertation together with more conventional AFPM topologies that employ a ferromagnetic core.

A challenge in designing coreless AFPM machines is estimating the eddy current losses. This work proposes a new hybrid analytical …

A Compiler Target Model For Line Associative Registers, Paul S. Eberhart

Theses and Dissertations--Electrical and Computer Engineering

LARs (Line Associative Registers) are very wide tagged registers, used for both register-wide SWAR (SIMD Within a Register )operations and scalar operations on arbitrary fields. LARs include a large data field, type tags, source addresses, and a dirty bit, which allow them to not only replace both caches and registers in the conventional memory hierarchy, but improve on both their functions. This thesis details a LAR-based architecture, and describes the design of a compiler which can generate code for a LAR-based design. In particular, type conversion, alignment, and register allocation are discussed in detail.

Oxidative Degradation Of Lignin And Investigation Of Utilization Of Lignin-Derived Materials As Building Blocks For Epoxy Resins, Zhen Fang

Theses and Dissertations--Chemistry

Lignin, the second most abundant biopolymer on earth, is potentially a replaceable source for bulky fuels and chemical feedstocks. There have been numerous reports on methods for the oxidative cleavage of β-O-4 linkages but relatively few reports of how those methods affect other linkages that are present in lignin. We investigated how the β-1 and β-5 linkages respond under oxidative conditions proposed for lignin deconstruction based on their effect on β-O-4 linkages. Mechanochemical treatment of lignin can greatly improve the yield of monomer products and we applied a mechanochemical approach, using powerful ring-and-puck milling to promote lignin degradation. Along with …

The Study Of Scandate Cathode And Its Characterization Under Various Stages Of Processing, Xiaomeng Zhang

Theses and Dissertations--Chemical and Materials Engineering

Scandate cathode under various processing stages: scandia nano-powder, tungsten scandia mix powder, sintered and impregnated pellets, were characterized with techniques that included electron microscopy, EDS, XPS, and work function measurements. The size and shape uniformity of nano-scale scandia particles changed from round to square and polyhedron during heat treatment. Reduction in size and improvement in size uniformity as heat treating temperature increased were observed. When determining the highest Sc coverage, three assessment methods were used and with their combined results, it was concluded that set VII had the highest Sc at%. In the sintered pellets, it was observed with SEM …

Biomass-Derived Activated Carbons For Electrical Double Layer Supercapacitors: Performance And Stress Effect, Wenxin Cao

Theses and Dissertations--Chemical and Materials Engineering

The vigorous development of human civilization has significantly increased the energy consumption in recent years. There is a great need to use renewable energy sources to substitute the depleting traditional fossil fuels, such as crude oil, natural gas and coal. The development of low-cost and high-performance energy storage devices (ESDs) and systems have drawn great attention due to their feasibility as backup power supply and their applications in portable electronics and electric vehicles. Supercapacitors are among the most important ESDs because of their long charging-discharging cycle life, high power capability and a large operating temperature range. In this thesis, high-performance …

Synthesis, Functionalization, And Application Of Nanofiltration And Composite Membranes For Selective Separations, Andrew Steven Colburn

Theses and Dissertations--Chemical and Materials Engineering

Future nanofiltration (NF) membranes used for selective separations of ions and small organic molecules must maintain performance in environments where high concentrations of total dissolved solvents or foulants are present. These challenges can be addressed through the development of composite membranes, as well as the engineering of enhanced surface properties and operating conditions for existing commercial membranes.

In this work, ion transport through commercial thin film composite (TFC) polyamide NF membranes were studied in both lab-prepared salt solutions and industrial wastewater. The dependence of several variables on ion rejection was investigated, including ion radius, ion charge, ionic strength, and temperature. …

Towards The Rational Design And Application Of Polymers For Gene Therapy: Internalization And Intracellular Fate, Landon Alexander Mott

Theses and Dissertations--Chemical and Materials Engineering

Gene therapy is an approach for the treatment of acquired cancers, infectious disease, degenerative disease, and inherited genetic indications. Developments in the fields of immunotherapies and CRISPR/Cas9 genome editing are revitalizing the efforts to move gene therapy to the forefront of modern medicine. However, slow progress and poor clinical outcomes have plagued the field due to regulatory and safety concerns associated with the flagship delivery vector, the recombinant virus. Immunogenicity and poor transduction in certain cell types severely limits the utility of viruses as a delivery agent of nucleic acids. As a result, significant efforts are being made to develop …

Development Of Novel Temperature Responsive Polymeric Sorbents And Their Applications In Water Remediation, Shuo Tang

Theses and Dissertations--Chemical and Materials Engineering

Water remediation utilizing sorption has found strong interest due to its inexpensiveness, universal nature and ease of operation. In particular, thermo-responsive sorbents consisting of N-isopropylacrylamide (NIPAAm) offer significant potential as “smart” and advanced materials to remove multiple aqueous pollutants. NIPAAm exhibits excellent thermo-responsiveness, which senses the external temperature variation and changes its swelling and sorption behaviors in a sharp and rapid manner. At the beginning of this work, an extensive review of literature has been compiled to provide a summary of NIPAAm-based thermo-responsive sorbents in water/wastewater remediation applications.

Initially, we developed a novel approach to synthesize and characterize NIPAAm copolymeric …

Functionalization Of Iron Oxide Nanoparticles And The Impact On Surface Reactive Oxygen Species Generation For Potential Biomedical And Environmental Applications, Trang Mai

Theses and Dissertations--Chemical and Materials Engineering

Iron oxide nanoparticles (IONPs) have been widely studied for a variety of applications, from biomedical applications (e.g., cell separation, drug delivery, contrast agent for magnetic resonance imaging and magnetically mediated energy delivery for cancer treatment) to environmental remediations (e.g., heavy metal removal and organic pollutants degradation). It has been demonstrated that IONPs can induce the production of reactive oxygen species (ROS) via Fenton/Haber-Weiss reactions which has been shown to be one of the key underlying mechanisms of nanoparticles toxicity. This inherent toxicity of nanoparticles has been shown to enhance the efficacy of traditional cancer therapies such as chemotherapy and radiation. …

Mechanical Properties And Degradation Of High Capacity Battery Electrodes: Fundamental Understanding And Coping Strategies, Yikai Wang

Theses and Dissertations--Chemical and Materials Engineering

Rechargeable lithium ion and lithium (Li) metal batteries with high energy density and stability are in high demand for the development of electric vehicles and smart grids. Intensive efforts have been devoted to developing high capacity battery electrodes. However, the known high capacity electrode materials experience fast capacity fading and have limited cycle life due to electromechanical degradations, such as fracture of Si-based electrodes and dendrite growth in Li metal electrodes. A fundamental understanding of electromechanical degradation mechanisms of high capacity electrodes will provide insights into strategies for improving their electrochemical performance. Thus, this dissertation focuses on mechanical properties, microstructure …

Cell Surface Coatings For Mammalian Cell-Based Therapeutic Delivery, Pei-Jung Wu

Theses and Dissertations--Chemical and Materials Engineering

The cell plasma membrane is an interactive interface playing an important role in regulating cell-to-cell, cell-to-tissue contact, and cell-to-environment responses. This environment-responsive phospholipid layer consisting of multiple dynamically balanced macromolecules, such as membrane proteins, carbohydrate and lipids, is regarded as a promising platform for various surface engineering strategies. Through different chemical modification routes, we are able to incorporate various artificial materials into the cell surface for biomedical applications in small molecule and cellular therapeutics.

In this dissertation, we establish two different cell coating techniques for applications of cell-mediated drug delivery and the localization of cell-based therapies to specific tissues. The …

Impact Of Conformational Change, Solvation Environment, And Post-Translational Modification On Desulfurization Enzyme 2'-Hydroxybiphenyl-2-Sulfinate Desulfinase (Dszb) Stability And Activity, Landon C. Mills

Theses and Dissertations--Chemical and Materials Engineering

Naturally occurring enzymatic pathways enable highly specific, rapid thiophenic sulfur cleavage occurring at ambient temperature and pressure, which may be harnessed for the desulfurization of petroleum-based fuel. One pathway found in bacteria is a four-step catabolic pathway (the 4S pathway) converting dibenzothiophene (DBT), a common crude oil contaminant, into 2-hydroxybiphenyl (HBP) without disrupting the carbon-carbon bonds. 2’-Hydroxybiphenyl-2-sulfinate desulfinase (DszB), the rate-limiting enzyme in the enzyme cascade, is capable of selectively cleaving carbon-sulfur bonds. Accordingly, understanding the molecular mechanisms of DszB activity may enable development of the cascade as industrial biotechnology. Based on crystallographic evidence, we hypothesized that DszB …

Targeted Illumination Strategies For Hydrogen Production From Purple Non-Sulfur Bacteria, John D. Craven

Theses and Dissertations--Chemical and Materials Engineering

The movement towards a more sustainable energy economy may require not only the generation of cleaner fuel sources, but the conversion of waste streams into value-added products. Phototrophic purple non-sulfur bacteria are capable of metabolizing VFAs (volatile fatty acids)and generate hydrogen as a byproduct of nitrogen fixation using energy absorbed from light. VFAs are easily produced from dark anaerobic fermentation of food, agricultural, and municipal wastes, which could then be fed into photobioreactors of purple bacteria for hydrogen production.

The process of photofermentation by purple bacteria for hydrogen production remains attractive due to the capability of reaching high substrate conversions …

Development Of Magnetic Nanocomposite Materials As Reusable Adsorbents For Chlorinated Organics In Contaminated Water, Angela Gutierrez

Theses and Dissertations--Chemical and Materials Engineering

The constant growth in population worldwide over the past decades continues to put forward the need to provide access to safe, clean water to meet human needs. There is a need for cost-effective technologies for water and wastewater treatment that can meet the global demands and the rigorous water quality standards and at the same maximizing pollutant efficiency removal. Current remediation technologies have failed in keeping up with these factors without becoming cost-prohibitive. Nanotechnology has recently been sought as a promising option to achieve these goals. The use of iron oxide magnetic nanoparticles as nanoadsorbents has led to a new …