Engineering Commons^™

Spectral Shaping For The Hearing Impaired, Brian D. Mclean

Retrospective Theses and Dissertations

Presented is a method for shaping the audio spectrum in order to improve speech intelligibility for the hearing impaired. Audiological data is used to design a finite impulse response (FIR) digital filter using the frequency sampling method. Cubic spline interpolation is used to generate any number of frequency samples from the limited number available from audiological data. The computer aided design procedure presented allows the filter designer to specify hearing threshold levels and threshold of discomfort levels at audiogram frequencies. The algorithm uses cubic spline interpolation to generate a smooth curve of gain versus frequency. Next, root-mean-square (RMS) error is …

Interactive Video Based Training Systems, Roy H. Hightower

Retrospective Theses and Dissertations

The training community has focused considerable attention on interactive video technology which in recent years has become a popular method of delivery for training applications utilizing microcomputers. This paper identifies the classifications of interactive video and addresses the hardware, software and processes required to utilize the technology for training applications. The capabilities and limitations of the technology are discussed with respect to the various video devices which are utilized. The major advantages of interactive video identified include the capability to combine computer graphics with video; the ability to deliver realistic video simulation; and the ability to store, sort, and retrieve …

New Excitation Signal For High Quality Linear Predictive Coding Speech Synthesis, William Andrew Pearson

Retrospective Theses and Dissertations

The purpose of this thesis is to improve the quality of synthetic to attempt to speech by using the bes t excitation signal during Linear Predictive Coding (LPC) synthesis. This thesis examines the human speech system as a basis for our synthetic speech model. Then it closely examines LPC synthesis, including the mathematical details. One dominant factor in producing natural-sounding and intelligible speech is the excitation signal. For LPC synthesis the excitation signal must have a flat frequency spectrum. A train of impulses separated by the pitch period of the speech has been the standard excitation signal for voiced speech …

The Use Of A Portable Microcomputer As A Data Collection Tool To Support Integrated Simulation Support Environments: A Concept, James E. Wilkinson

Retrospective Theses and Dissertations

Advances in simulation methodology, and the computer support systems to implement these methodologies, have led to the development of integrated simulation support environments. These environments, or collection of software tools, seek to aid the analyst in developing models, data management and analysis, and data presentation.

While an integrated simulation environment provides a more organized structure for managing and performing simulation projects, and provides a database management structure for storing, manipulating, and analyzing data, they do not address the actual process of going out and obtaining the data. As a result, many of the common problems associated with poor problem and …

Image Reconstruction After Transform Coding Using Relative Entropy And Maximum Entropy, John S. Bodenschatz

Retrospective Theses and Dissertations

Presented are two new methods based on entropy for reconstructing images compressed with the Discrete Cosine transform. One method is based upon a sequential implementation of the Minimum Relative Entropy Principle; the other is based upon the Maximum Entropy Principle. These will be compared with each other and with the conventional method employing the Inverse Discrete Cosine transform. Chapter 2 describes the traditional use of the Discrete Cosine transform for image compression. Chapter 3 explains the theory and implementation of the entropy-based reconstructions. It introduces a fast algorithm for the Maximum Entropy Principle. Chapter 4 compares the numerical performance of …

Study Of A Terrain Avoidance Algorithm To Be Used In Conjunction With The Lantirn Terrain Following System, Glenda C. Frazier

Retrospective Theses and Dissertations

This paper describes the development of a basic terrain avoidance algorithm which is proposed for use with the terrain following algorithm in the Low Altitude Navigation and Targeting Infrared System for Night (LANTIRN). The algorithms were modeled in a digital simulation in which an aircraft is flown over a single-obstacle three-dimensional terrain. Vertical acceleration and roll angle commands are generated in the simulation by the algorithms using terrain data collected from the modeled terrain following radar antenna scan. The response of the aircraft to these commands is determined, and the resulting trajectories over the terrain are displayed.

The development of …

Human Factors Compatibility Concerns In The Selection Of Display Technologies For Computer And Data Terminals, Francis C. Westerfield

Retrospective Theses and Dissertations

Human factors considerations are often overlooked in the selection of electronic computer displays. When cost is used as the only determining factor, the resulting product may not be commercially successful because of an inadequate display.

To help avoid this situation, designers and users should be aware of the various factors involved in proper display selection. These factors were developed by a synthesis of existing scientific and industrial literature on the subject and are explained in this paper.

The first factor is a basic knowledge of the structure, characteristics, and function of the human visual system. The theory of sight, anatomy …

An Experimental And Theoretical Analysis Of A Laser Beam Propagating Through Multiple Phase Screens, Arthur R. Weeks

Retrospective Theses and Dissertations

An experimental and a theoretical analysis for a laser beam propagating through multiple phase screens was performed. The theoretical analysis showed that the statistics for the intensity fluctuations, which can be predicted by the HK and the I-K distributions, could be derived from a multiplicative process using statistical distributions derived from Gaussian statistics. For the single phase screen experiment, the experimental normalized moments were compared with the normalized moments of both the HK and I-K distributions . In addition, the intensity data was lowpass filtered to yield moments that are predicted by the gamma distribution. The single phase screen data …

Effect Of Manufacturing Tolerances On The Number Of Load Carrying Fasteners In A Joint Subjected To A Shear Load: A Statistical Approach, Larry John Borkowski

Retrospective Theses and Dissertations

Within the elastic range, the number of load-carrying fasteners in an interchangeable manufactured joint subjected to a shear load is dependent upon the following characteristics: 1. Material properties of the constituent parts in the shear joint. 2. Geometry of the shear joint. 3. Manufacturing tolerances of the constituent parts in the shear joint. 4. Number of fasteners in the shear joint. 5. Preload on the fasteners in the joint. 6. Static coefficient of friction between the joint surfaces. Neglecting the effects of preload and friction, the number of load-carrying fasteners is determined for a theoretical bolted joint design as a …

The Design Of A Processing Element For The Systolic Array Implementation Of A Kalman Filter, John P. Condorodis

Retrospective Theses and Dissertations

The Kalman filter is an important component of optimal estimation theory. It has applications in a wide range of high performance control systems including navigational, fire control, and targeting systems. The Kalman filter, however, has not been utilized to its full potential due to the limitations of its inherent computational intensiveness which requires "off-line" processing or allows only low bandwidth real-time applications.

The recent advances in VLSI circuit technology have created the opportunity to design algorithms and data structures for direct implementation in integrated circuits. A systolic architecture is a concept which allows the construction of massively parallel systems in …

Radiant Energy Transfer And Radiant Barrier Systems In Buildings, Florida Solar Energy Center, Philip W. Fairey

FSEC Energy Research Center®

In Florida and other southern climates we depend on a number of strategies to keep heat out of buildings. Mostly, these affect heat gains by conduction or convection. In the average house, insulating walls and ceilings primarily restricts conduction. Double-glazed windows restrict both conductive and convective heat gain. We have largely ignored radiation - the third means of heat transfer - except in using window treatments and coatings that reflect, absorb or shade from solar energy. But research points to exciting potential for reducing heat gain in buildings by controlling radiation transfer in walls and ceilings through the use of …

Techniques For Shading Residential Walls And Windows, Florida Solar Energy Center, Philip W. Fairey

FSEC Energy Research Center®

Solar radiation is a major heat source in buildings - welcome in cold weather but a summertime problem. Florida's long cooling season and short heating season increase the importance of protecting windows, walls and sliding glass doors during hot weather, while still permitting solar heat to enter a building during cold weather. cooling and heating energy savings of 10% - 20% are possible through good shading strategies. Properly designed roof overhangs can provide adequate sun protection, especially for south-facing surfaces. Vertical shading devices such as trees, trellises, trellised vines, shutters, shading screens awnings and exterior roll blinds are also effective. …

Solar Water Heater Troubleshooting Checklist, Florida Solar Energy Center

FSEC Energy Research Center®

Lists the Symptom, Component, Possible Cause, and Remedy/Check of possible solar hot water heater problems.

Solar Ovens And Cookers, Florida Solar Energy Center

FSEC Energy Research Center®

Solar ovens work much like solar collectors used in domestic water heating systems. Both collect solar radiation, convert it to heat and transfer it to another substance. Solar ovens, however, focus the sun's rays with reflective surfaces on one point. The object of the sun's energy in the solar oven is the food.

Recipes For Solar Cooking, Florida Solar Energy Center, Jo Townsend

FSEC Energy Research Center®

As energy extension agent for the University of Florida Extension Service, Jo Townsend serves as the energy educator to small businesses in central Florida. She conducts employee programs on energy conservation in the workplace. She received her B.S. in home economics from Florida State University and her M.E. from the University of Central Florida. Formerly a home economist for the Florida cooperative Extension Service, Townsend researched and tested recipes for use in microwaves when they first gained popularity. She has been a consultant to Southern Living magazine and to Florida's seafood industry. For the last year, she has tested recipes …

Cooling With Ventilation, Florida Solar Energy Center, Subrato Chandra

FSEC Energy Research Center®

In keeping with the national energy policy goal of fostering an adequate supply of energy at a reasonable cost, the United States Department of Energy (DOE) supports a variety of programs to promote a balanced and mixed energy resource system. The mission of the DOE Solar Building Research and Development Program is to support this goal by providing for the development of solar technology alternatives for the buildings sector. It is the goal of the Program to establish a proven technology base to allow industry to develop solar products and designs for buildings that are economically competitive and can contribute …

Latent And Sensible Load Distributions In Conventional And Energy Efficient Residences. Final Report, January 1983 - January 1986. 05-86., Florida Solar Energy Center, Alp Kerestecioglu

FSEC Energy Research Center®

To develop a method to characterize the cooling load distributions in conventional and energy efficient residences, specifically as related to building dehumidification loads, as they pertain to the potential for the use of gas-fired dehumidification and cooling equipment.

Pulse Width Modulated Adaptive Delta Modem Design And Analysis, Gregory L. Milne

Retrospective Theses and Dissertations

A unique design of a voiceband adaptive delta modem will be presented. The modulator utilizes a constant amplitude variable width pulse combined with the principles of delta modulation. This results in a modem that has lower amplitude distortion, requires less transmission channel bandwidth, and is less prone to slope overload than conventional adaptive delta modems. The design also allows the use of a simple single integration demodulator while maintaining fidelity.

The modem design and analysis is presented assuming a transmission channel which is bandwidth limited and amplitude limited.

Dynamic Systems Analysis Of A Vehicle Suspension System, Bruce M. Skeldon

Retrospective Theses and Dissertations

This research report deals with one system in a Computer Aided Instruction package in the Dynamic Systems and Control Theory fields for the college undergraduate students. It uses the computer to numerically solve the two degree of freedom equations of motion for a vehicle suspension system. Numerical solutions to the system differential equations are used to drive an animated display of the vehicle’s motion (vertical displacement and rotation about the center of gravity) on the video display terminal.

The Integration Of Computer Graphics With Video Disc Technology: An Application In Training, Fereidon Torkzadeh

Retrospective Theses and Dissertations

The major objective of the work outlined in this paper is to become familiar with the MOVIE.BYU graphic system from Brigham Young University to demonstrate its use in the generation of non real-time images for a typical pilot training application. The implementation is done by using the MOVIE.BYU graphics system, a VAX 11/750 digital computer, and RAMTEK 9460 system. This paper discusses how the images can be stored a frame at a time on a video disc for playback at the normal rate to portray a moving scene using a Panasonic video disc recorder and player, and a Sony video …

A Theoretical Evaluation Of Water Surface Changes In A Circular Reservoir, Hossein G. Tehrani

Retrospective Theses and Dissertations

The purpose of this project is primarily to develop an equation to estimate the time that it will take for the water surface to decrease to another depth in an inverted conical-shaped reservoir behind an earth dam by means of the falling head permeability concept. This equation can be applied to the earth embankment either with or without underdrain. Since the derived equation for time span is a complicated and tedious matter, a computer program has been developed for solving this equation.

The computer program is written in BASIC language and executed on a Tektronix 4051 microcomputer. Primary effort has …

The Effect Of Detention Period On The Clarification Efficiency Of Nitrified Activated Sludge, James C. Boyd

Retrospective Theses and Dissertations

Proper performance of the final clarifier in the activated sludge process is vital to total system efficiency. Inadequate clarification can adversely affect substrate removal efficiency due to the biochemical oxygen demand exerted by solids lost in the clarifier effluent. Detention period is one factor which influences clarification performance and thus is of interest to the designer engineer. Also of interest is the relationship between detention period and rising sludge conditions in the clarifier, which can lead to a deterioration in clarification efficiency. Rising Sludge conditions are believed to be caused by the denitrification of nitrified activated sludge in the final …

Phase-Locked Loop Based Oscillator Phase Noise Measurement Technique, Luis M. Jimenez

Retrospective Theses and Dissertations

Oscillators play an important role in the performance of various radio frequency (RF) systems. The generation of stable carrier and clock frequencies is necessary at both the transmitter and receiver ends of a communication system. Phase noise is the parameter used to characterize an oscillator frequency stability. This thesis introduces a phase noise measurement technique using a phase-locked loop. A 100 MHz Colpitt’s oscillator, for the phase noise source, was designed and built. The output of the oscillator was mixed down to 10 MHz, before a phase-locked loop extracted the phase noise information. Measurements were taken at RF frequencies using …

Optimizing Scanning Mirror System Performance Using Solid State Piezoelectric Actuators, Thomas J. Tomasetti

Retrospective Theses and Dissertations

The purpose of this thesis is to design a scanning mirror system using piezoelectric actuators. A dual-cantilevered bimorph electromechanical coupling is presented, which maximizes the amount of angular deflection possible with an applied field. Two types of feedback methods are employed: rate sensing, which provides resonance damping, and position sensing for increased bandwidth and decreased hysteresis. A prototype system, including the actuator and feedback mechanisms, is developed. Its performance compares favorably with its model and is capable of plus and minus five degrees of angular deflection with a bandwidth of 300 Hertz.

Development And Testing Of A Heuristic Line Balancing Program For A Microcomputer, Dean B. Creech

Retrospective Theses and Dissertations

Development, operation, and testing of a heuristic line balancing program for a microcomputer are discussed. Tasks are grouped into work stations along an assembly line such that the number of work stations required is minimized.

The model is built primarily using the Hoffman (1963) procedure with modifications described by Gehrlein and Patterson (1975). For purposes of comparison the Rank Positional Weight technique (Helgeson and Birnie, 1961) is also included in the model.

Testing included thirty-seven different balances using problems from the literature. For each balance, both Rank Positional Weight and Hoffmann solutions were obtained in the forward and reverse directions. …

Separation Plane Priority In Computer Image Generation, Keith A. Stump

Retrospective Theses and Dissertations

Flight simulators are devices in which air crews can be trained without the use of actual aircraft. Potentially dangerous maneuvers, such as air-to-air refueling, and destructive exercises, such as evasive action from weaponry or aerial dogfights, can be practiced repeatedly with no risk to pilot or crew. Flight simulators are cost effective since the fuel costs associated with training pilots in actual aircraft can be excessive. Flight simulators offer an alternate training method with reduced cost. The task of a visual flight simulator is to present the trainee with scenes representative of those that would be seen if the actual …

Numerical Simulation Of Air-Conditioning Heat Recovery Water Heating Systems, Amir H. Gorji

Retrospective Theses and Dissertations

A computer simulation program called TRNSYS (Transient System Simulation) was used to model two air-conditioning waste heat recovery water heating configurations. The first model is a heat recovery unit (HRU) that utilizes an 80-gallon storage tank in conjunction with a conventional home air-conditioning system. The second model is similar to the first, except that there is an additional 80-gallon preheat storage tank. An attempt was made to compare simulation results with experimental field data. However, due to problems encountered during the field tests, such as equipment and/or instrumentation failure, there were not enough experimental data to make a rigorous comparison. …

A Performance Comparison Of Solar Radiation Predictive Models For Both Fixed And Tracking Surfaces, William F. Marion

Retrospective Theses and Dissertations

Accurate performance prediction for a system utilizing solar energy requires accurate estimates of the solar radiation received by the collector surface. This thesis compares the performance of five different diffuse solar radiation models in estimating the diffuse radiation received by a tilted surface in the warm, humid climate of Central Florida.

The following models were studied: Isotropic Model, Temps and Coulson Model, Klucher Model, Hay Model, and Perez Model. The models were evaluated for both a fixed south facing surface and for three different tracking schemes suitable for photovoltaic applications. Model estimates were then compared to the solar radiation data …

A Zero Extraction And Separation Technique For Surface Acoustic Wave And Digital Signal Processing Fir Filter Implementation, Keith V. Lindsay

Retrospective Theses and Dissertations

Presented is a new method of separating the zeros of a Finite Impulse Response (FIR) filter producing optimal digital filter of surface acoustic wave (SAW) design implementation. Overviews of zero extraction algorithms and of FIR filter design using the Remez Exchange algorithm are presented (McClellen et al. 1973).

The computer aided design (CAD) procedure presented allows the designer to specify the general filter characteristic which the Remez algorithm translates to FIR time domain coefficients. These coefficients are readily translated to the frequency (z) domain, producing an Nth order polynomial in z. The characteristic polynomial is factored to determine all roots …

The Design And Implementation Of Surface Acoustic Wave Devices For Linear Fm And Nonlinear Fm Pulse Compression Technique For Radar Applications, James C. Walker

Retrospective Theses and Dissertations

The purpose of this work is to design, fabricate, and compare dispersive SAW devices using both linear FM and a new non-linear FM scheme. This new non-linear FM scheme uses the Blackman function as the modulating signal of the FM waveform. Up-chirped and V-chirped devices for both linear and the new non-linear FM scheme and their corresponding matched filters are compared.

Design considerations are discussed in detail. An efficient sampling algorithm (which can also be applied to other non-linearly modulated FM waveforms) developed to facilitate the design of the SAW devices is presented.