Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

University of Central Florida

Discipline
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 1891 - 1920 of 4566

Full-Text Articles in Engineering

Self-Assembled Two-Component Organic Tubes: Structures And Applications, Wenlang Liang Jan 2013

Self-Assembled Two-Component Organic Tubes: Structures And Applications, Wenlang Liang

Electronic Theses and Dissertations

Bile acids are physiologically important metabolites, which are synthesized in liver as the end products of cholesterol metabolism and then secreted into the intestines. They play a critical role in the digestion and absorption of fats and fat-soluble vitamins through emulsifications. The amphipathic and chiral nature of bile acids makes their unique building blocks for assembling supramolecular structures including vesicles, fibers, ribbons and hollow tubes. Lithocholic acid (LCA) is a secondary bile acid. Our studies show LCA can selfassemble into helical tubes in aqueous solution by the linear aggregation and fusion of vesicles. The objective of this dissertation is to …

Go to article

Ozone And Gac Treatment Of A Central Florida Groundwater For Sulfide And Disinfectant By-Product Control, Tara Lamoureux Jan 2013

Ozone And Gac Treatment Of A Central Florida Groundwater For Sulfide And Disinfectant By-Product Control, Tara Lamoureux

Electronic Theses and Dissertations

This study evaluated the combination of ozone and granular activated carbon (GAC) treatment for the removal of sulfide and disinfection byproduct (DBP) precursors in drinking water at the pilot-scale. The research conducted was performed at the Auxiliary (Aux) and Main Water Treatment Plants (WTPs) in Sanford, Florida. Both WTPs rely upon groundwater sources that contain total sulfide ranging from 0.02 to 2.35 mg/L and total organic carbon (TOC) ranging from 0.61 to 2.20 mg/L. The Aux WTP’s raw water contains, on average, 88% more sulfide and 24% more TOC than the Main WTP. Haloacetic acids (HAA5) and total trihalomethanes (TTHMs) …

Go to article

Load Estimation For Electric Power Distribution Networks, Chiebuka Eyisi Jan 2013

Load Estimation For Electric Power Distribution Networks, Chiebuka Eyisi

Electronic Theses and Dissertations

In electric power distribution systems, the major determinant in electricity supply strategy is the quantity of demand. Customers need to be accurately represented using updated nodal load information as a requirement for efficient control and operation of the distribution network. In Distribution Load Estimation (DLE), two major categories of data are utilized: historical data and direct real-time measured data. In this thesis, a comprehensive survey on the state-of-the-art methods for estimating loads in distribution networks is presented. Then, a novel method for representing historical data in the form of Representative Load Curves (RLCs) for use in realtime DLE is also …

Go to article

Time And Space Efficient Techniques For Facial Recognition, Waleed Alrasheed Jan 2013

Time And Space Efficient Techniques For Facial Recognition, Waleed Alrasheed

Electronic Theses and Dissertations

In recent years, there has been an increasing interest in face recognition. As a result, many new facial recognition techniques have been introduced. Recent developments in the field of face recognition have led to an increase in the number of available face recognition commercial products. However, Face recognition techniques are currently constrained by three main factors: recognition accuracy, computational complexity, and storage requirements. The problem is that most of the current face recognition techniques succeed in improving one or two of these factors at the expense of the others. In this dissertation, four novel face recognition techniques that improve the …

Go to article

Experimental Investigation Of Breakup And Coalescence Characteristics Of A Hollow Cone Swirling Spray, Joshua Lee Jan 2013

Experimental Investigation Of Breakup And Coalescence Characteristics Of A Hollow Cone Swirling Spray, Joshua Lee

Electronic Theses and Dissertations

Atomization can be achieved by discharging liquid at relative high velocities into a slow moving environment (hydraulic nozzles) or by discharging liquid at low velocities into a fast moving gas flow (air-blast nozzles). These two types of injector nozzles are featured in majority of the industry applications such as power generation, food or pharmaceutical powder formation, spray painting, petroleum refining, and thermal sprays. The most common atomizer used in combustion engines is the pressure-swirl nozzle (Simplex nozzle) to obtain a homogenous mixture at different equivalence ratios. The experimental studies performed with pressure-swirl nozzles have reported contradictory results over the last …

Go to article

Scene Understanding For Real Time Processing Of Queries Over Big Data Streaming Video, Alexander Aved Jan 2013

Scene Understanding For Real Time Processing Of Queries Over Big Data Streaming Video, Alexander Aved

Electronic Theses and Dissertations

With heightened security concerns across the globe and the increasing need to monitor, preserve and protect infrastructure and public spaces to ensure proper operation, quality assurance and safety, numerous video cameras have been deployed. Accordingly, they also need to be monitored effectively and efficiently. However, relying on human operators to constantly monitor all the video streams is not scalable or cost effective. Humans can become subjective, fatigued, even exhibit bias and it is difficult to maintain high levels of vigilance when capturing, searching and recognizing events that occur infrequently or in isolation. These limitations are addressed in the Live Video …

Go to article

Simulation-Based Cognitive Workload Modeling And Evaluation Of Adaptive Automation Invoking And Revoking Strategies, Christina Rusnock Jan 2013

Simulation-Based Cognitive Workload Modeling And Evaluation Of Adaptive Automation Invoking And Revoking Strategies, Christina Rusnock

Electronic Theses and Dissertations

In human-computer systems, such as supervisory control systems, large volumes of incoming and complex information can degrade overall system performance. Strategically integrating automation to offload tasks from the operator has been shown to increase not only human performance but also operator efficiency and safety. However, increased automation allows for increased task complexity, which can lead to high cognitive workload and degradation of situational awareness. Adaptive automation is one potential solution to resolve these issues, while maintaining the benefits of traditional automation. Adaptive automation occurs dynamically, with the quantity of automated tasks changing in real-time to meet performance or workload goals. …

Go to article

A Comparative Evaluation Of Fdsa,Ga, And Sa Non-Linear Programming Algorithms And Development Of System-Optimal Methodology For Dynamic Pricing On I-95 Express, Don Graham Jan 2013

A Comparative Evaluation Of Fdsa,Ga, And Sa Non-Linear Programming Algorithms And Development Of System-Optimal Methodology For Dynamic Pricing On I-95 Express, Don Graham

Electronic Theses and Dissertations

As urban population across the globe increases, the demand for adequate transportation grows. Several strategies have been suggested as a solution to the congestion which results from this high demand outpacing the existing supply of transportation facilities. High –Occupancy Toll (HOT) lanes have become increasingly more popular as a feature on today’s highway system. The I-95 Express HOT lane in Miami Florida, which is currently being expanded from a single Phase (Phase I) into two Phases, is one such HOT facility. With the growing abundance of such facilities comes the need for indepth study of demand patterns and development of …

Go to article

Interdiffusion Study Of Mg-Aa6061 System, Mian Fu Jan 2013

Interdiffusion Study Of Mg-Aa6061 System, Mian Fu

Electronic Theses and Dissertations

Magnesium (Mg) is a light-weight metal that has extraordinary physical and chemical properties for many potential applications in automobile, military, and electronics. Aluminum alloys, because of its light-weight, high strength and corrosion resistance have a wide range of commercial applications. Given these two, sometime competing, alloy systems, there are now many applications where the metallurgical compatibility of Mg- and Al-alloys are required for engineering applications. One such case is the development of diffusion barrier for U-Mo metallic fuel in Al-alloy cladding, where Mg, with its complete immiscibility with U and Mo is being considered as the diffusion barrier. While negligible …

Go to article

Hydromorphology Of The Econlockhatchee River, John Baker Jan 2013

Hydromorphology Of The Econlockhatchee River, John Baker

Electronic Theses and Dissertations

Climate change and human activities alter the hydrologic systems and exerted global scale impacts on our environment with significant implications for water resources. Climate change can be characterized by the change of precipitation and temperature, and both precipitation pattern change and global warming are associated with the increase in frequency of flooding or drought and low flows. With increasing water demand from domestic, agricultural, commercial, and industrial sectors, humans are increasingly becoming a significant component of the hydrologic cycle. Human activities have transformed hydrologic processes at spatial scales ranging from local to global. Human activities affecting watershed hydrology include land …

Go to article

Understanding The Capabilities And Limitations Of Advanced Interactive M&S: A Cricothyroidotomy Simulation Case Study, Lillian Campbell-Wynn Jan 2013

Understanding The Capabilities And Limitations Of Advanced Interactive M&S: A Cricothyroidotomy Simulation Case Study, Lillian Campbell-Wynn

Electronic Theses and Dissertations

Simulation for surgical education and training is increasingly perceived as a valuable contribution to traditional teaching methods providing a structured learning experience. Surgical simulations allow surgeons to practice tactics, techniques and procedures numerous times without the cost, limitations and ethical problems of using cadaver-based models. The goal of this research is to advance the use of modeling and simulation in support of emergency medical training. This research explores questions identified through a case study of two different modeling and simulation techniques – virtual reality and mannequins - in the support of combat emergency medical education and training. To reduce the …

Go to article

Fast-Response Liquid Crystals For Photonic And Display Applications, Jie Sun Jan 2013

Fast-Response Liquid Crystals For Photonic And Display Applications, Jie Sun

Electronic Theses and Dissertations

Liquid crystal devices are attractive for many applications such as information displays, spatial light modulators and adaptive optics, because their optical properties are electrically tunable. However, response time of liquid crystal devices is a serious concern for many applications especially for those who require large phase modulation (≥2π). This is because a thick LC layer is usually needed to achieve a large phase shift while the response time of a nematic LC is highly determined by the cell gap.

Go to article

Optically Induced Forces In Scanning Probe Microscopy, Dana Kohlgraf-Owens Jan 2013

Optically Induced Forces In Scanning Probe Microscopy, Dana Kohlgraf-Owens

Electronic Theses and Dissertations

The focus of this dissertation is the study of measuring light not by energy transfer as is done with a standard photodetector such as a photographic film or charged coupled device, but rather by the forces which the light exerts on matter. In this manner we are able to replace or complement standard photodetector-based light detection techniques. One key attribute of force detection is that it permits the measurement of light over a very large range of frequencies including those which are difficult to access with standard photodetectors, such as the far IR and THz. The dissertation addresses the specific …

Go to article

High Flux Isolated Attosecond Pulse Generation, Yi Wu Jan 2013

High Flux Isolated Attosecond Pulse Generation, Yi Wu

Electronic Theses and Dissertations

This thesis outlines the high intensity tabletop attosecond extreme ultraviolet laser source at the Institute for the Frontier of Attosecond Science and Technology Laboratory. First, a unique Ti:Sapphire chirped pulse amplifier laser system that delivers 14 fs pulses with 300 mJ energy at a 10 Hz repetition rate was designed and built. The broadband spectrum extending from 700 nm to 900 nm was obtained by seeding a two stage Ti:Sapphire chirped pulse power amplifier with mJ-level white light pulses from a gas filled hollow core fiber. It is the highest energy level ever achieved by a broadband pulse in a …

Go to article

Peak Power Scaling Of Nanosecond Pulses In Thulium Based Fiber Lasers, Christian Gaida Jan 2013

Peak Power Scaling Of Nanosecond Pulses In Thulium Based Fiber Lasers, Christian Gaida

Electronic Theses and Dissertations

Thulium based fiber lasers represent a promising alternative for pulse energy scaling and high peak power generation with ytterbium based systems at 1µm. Advantages of thulium arise from the operation at longer wavelengths and a large gain bandwidth (1.8-2.1µm). Nonlinear effects, such as self phase modulation, stimulated Raman scattering and stimulated Brillouin scattering generally limit peak power scaling in fiber lasers. The longer wavelength of thulium fiber lasers and large mode field areas can significantly increase the nonlinear thresholds. Compared to 1µm systems, thulium fiber lasers enable single mode guidance for two times larger mode field diameter in step index …

Go to article

A Linear Multiplexed Electrospray Thin Film Deposition System, Brandon Lojewski Jan 2013

A Linear Multiplexed Electrospray Thin Film Deposition System, Brandon Lojewski

Electronic Theses and Dissertations

Liquid spray is essential to industries requiring processes such as spray coating, spray drying, spray pyrolysis, or spray cooling. This thesis reports the design, fabrication, and characterization of a thin film deposition system which utilizes a linear multiplexed electrospray (LINES) atomizer. First, a thorough review of the advantages and limitations of prior multiplexed electrospray systems leads to discussion of the design rationale for this work. Next, the line of charge model was extended to prescribe the operating conditions for the experiments and to estimate the spray profile. The spray profile was then simulated using a Lagrangian model and solved using …

Go to article

Injection Locking Of Semiconductor Mode-Locked Lasers For Long-Term Stability Of Widely Tunable Frequency Combs, Charles Williams Jan 2013

Injection Locking Of Semiconductor Mode-Locked Lasers For Long-Term Stability Of Widely Tunable Frequency Combs, Charles Williams

Electronic Theses and Dissertations

Harmonically mode-locked semiconductor lasers with external ring cavities offer high repetition rate pulse trains while maintaining low optical linewidth via long cavity storage times. Single frequency injection locking generates widely-spaced and tunable frequency combs from these harmonically mode-locked lasers, while stabilizing the optical frequencies. The output is stabilized long-term with the help of a feedback loop utilizing either a novel technique based on Pound-Drever-Hall stabilization or by polarization spectroscopy. Error signals of both techniques are simulated and compared to experimentally obtained signals. Frequency combs spaced by 2.5 GHz and ~10 GHz are generated, with demonstrated optical sidemode suppression of unwanted …

Go to article

Detecting Semantic Method Clones In Java Code Using Method Ioe-Behavior, Rochelle Elva Jan 2013

Detecting Semantic Method Clones In Java Code Using Method Ioe-Behavior, Rochelle Elva

Electronic Theses and Dissertations

The determination of semantic equivalence is an undecidable problem; however, this dissertation shows that a reasonable approximation can be obtained using a combination of static and dynamic analysis. This study investigates the detection of functional duplicates, referred to as semantic method clones (SMCs), in Java code. My algorithm extends the input-output notion of observable behavior, used in related work [1, 2], to include the effects of the method. The latter property refers to the persistent changes to the heap, brought about by the execution of the method. To differentiate this from the typical input-output behavior used by other researchers, I …

Go to article

Novel Nanostructures And Processes For Enhanced Catalysis Of Composite Solid Propellants, Robert Draper Jan 2013

Novel Nanostructures And Processes For Enhanced Catalysis Of Composite Solid Propellants, Robert Draper

Electronic Theses and Dissertations

The purpose of this study is to examine the burning behaviour of composite solid propellants (CSP) in the presence of nanoscale, heterogenous catalysts. The study targets the decomposition of ammonium perchlorate (AP) as a key component in the burning profile of these propellants, and seeks to identify parameters of AP decomposition reaction that can be affected by catalytic additives. The decomposition behavior of AP was studied in the presence of titanium dioxide nanoparticles in varying configurations, surface conditions, dopants, morphology, and synthesis parameters with the AP crystals. The catalytic nanoparticles were found to enhance the decomposition rate of the ammonium …

Go to article

Modeling And Simulation Of All-Electric Aircraft Power Generation And Actuation, David Woodburn Jan 2013

Modeling And Simulation Of All-Electric Aircraft Power Generation And Actuation, David Woodburn

Electronic Theses and Dissertations

Modern aircraft, military and commercial, rely extensively on hydraulic systems. However, there is great interest in the avionics community to replace hydraulic systems with electric systems. There are physical challenges to replacing hydraulic actuators with electromechanical actuators (EMAs), especially for flight control surface actuation. These include dynamic heat generation and power management. Simulation is seen as a powerful tool in making the transition to all-electric aircraft by predicting the dynamic heat generated and the power flow in the EMA. Chapter 2 of this dissertation describes the nonlinear, lumped-element, integrated modeling of a permanent magnet (PM) motor used in an EMA. …

Go to article

Scandia And Ceria Stabilized Zirconia Based Electrolytes And Anodes For Intermediate Temperature Solid Oxide Fuel Cells: Manufacturing And Properties, Yan Chen Jan 2013

Scandia And Ceria Stabilized Zirconia Based Electrolytes And Anodes For Intermediate Temperature Solid Oxide Fuel Cells: Manufacturing And Properties, Yan Chen

Electronic Theses and Dissertations

Mesoscale optical phenomena occur when light interacts with a number of different types of materials, such as biological and chemical systems and fabricated nanostructures. As a framework, mesoscale optics unifies the interpretations of the interaction of light with complex media when the outcome depends significantly upon the scale of the interaction. Most importantly, it guides the process of designing an optical sensing technique by focusing on the nature and amount of information that can be extracted from a measurement. Different aspects of mesoscale optics are addressed in this dissertation which led to the solution of a number of problems in …

Go to article

Development Of The Strategy To Select Optimum Reflective Cracking Mitigation Methods For The Hot-Mix Asphalt Overlays In Florida, Hamid Maherinia Jan 2013

Development Of The Strategy To Select Optimum Reflective Cracking Mitigation Methods For The Hot-Mix Asphalt Overlays In Florida, Hamid Maherinia

Electronic Theses and Dissertations

Hot Mix Asphalt (HMA) overlay is a major rehabilitation treatment for the existing deteriorated pavements (both flexible and rigid pavements). Reflective cracking (RC) is the most common distress type appearing in the HMA overlays which structurally and functionally degrades the whole pavement structure, especially under high traffic volume. Although many studies have been conducted to identify the best performing RC mitigation technique, the level of success varies from premature failure to good performance in the field. In Florida, Asphalt Rubber Membrane Interlayers (ARMIs) have been used as a RC mitigation technique but its field performance has not been successful. In …

Go to article

Mesoscale Light-Matter Interactions, Kyle Douglass Jan 2013

Mesoscale Light-Matter Interactions, Kyle Douglass

Electronic Theses and Dissertations

Mesoscale optical phenomena occur when light interacts with a number of different types of materials, such as biological and chemical systems and fabricated nanostructures. As a framework, mesoscale optics unifies the interpretations of the interaction of light with complex media when the outcome depends significantly upon the scale of the interaction. Most importantly, it guides the process of designing an optical sensing technique by focusing on the nature and amount of information that can be extracted from a measurement. Different aspects of mesoscale optics are addressed in this dissertation which led to the solution of a number of problems in …

Go to article

Fabrication Of Metallic Antenna Arrays Using Nanoimprint Lithography, Yu-Wei Lin Jan 2013

Fabrication Of Metallic Antenna Arrays Using Nanoimprint Lithography, Yu-Wei Lin

Electronic Theses and Dissertations

This Thesis describes the development of a cost-effective process for patterning nanoscale metal antenna arrays. Soft ultraviolet (UV) Nanoimprint Lithography (NIL) into bilayer resist was chosen since it enables repeatable large-scale replication of nanoscale patterns with good lift-off properties using a simple low-cost process. Nanofabrication often involves the use of Electron Beam Lithography (EBL) which enables the definition of nanoscale patterns on small sample regions, typically < 1 mm 2 . However its sequential nature makes the large scale production of nanostructured substrates using EBL cost-prohibitive. NIL is a pattern replication method that can reproduce nanoscale patterns in a parallel fashion, allowing the low-cost and rapid production of a large number of nanopatterned samples based on a single nanostructured master mold. Standard NIL replicates patterns by pressing a nanostructured hard mold into a soft resist layer on a substrate resulting in exposed substrate regions, followed by an optional Reactive Ion Etching (RIE) step and the subsequent deposition of e.g. metal onto the exposed substrate area. However, non-vertical sidewalls of the features in the resist layer resulting from an imperfect hard mold, from reflow of the resist layer, or from isotropic etching in the RIE step iii may cause imperfect lift-off. To overcome this problem, a bilayer resist method can be used. Using stacked resist layers with different etch rates, undercut structures can be obtained after the RIE step, allowing for easy lift-off even when using a mold with non-vertical sidewalls. Experiments were carried out using a nanostructured negative SiO2 master mold. Various material combinations and processing methods were explored. The negative master mold was transferred to a positive soft mold, leaving the original master mold unaltered. The soft mold consisted of a 5 m thick top Poly(methyl methacrylate) (PMMA), or Polyvinyl alcohol (PVA) layer, a 1.5 mm thick Polydimethylsiloxane (PDMS) buffer layer, and a glass supporting substrate. The soft mold was pressed into a bilayer of 300 nm PMMA and 350 nm of silicon based UV-curable resist that was spin-coated onto a glass slide, and cured using UV radiation. The imprinted patterns were etched using RIE, exposing the substrate, followed by metal deposition and lift-off. The experiments show that the use of soft molds enables successful pattern transfer even in the presence of small dust particles between the mold and the resist layer. Feature sizes down to 280 nm were replicated successfully

Go to article

Volume Phase Masks In Photo-Thermo-Refractive Glass, Marc Segall Jan 2013

Volume Phase Masks In Photo-Thermo-Refractive Glass, Marc Segall

Electronic Theses and Dissertations

In many applications such as beam shaping, mode conversion, and phase encoding it is necessary to alter the spatial phase profile of a beam via a phase mask. Conventional techniques to accomplish this either involve surface relief profiling in thin films such as PMMA or refractive index modulation in bulk photorefractive crystals such as lithium niobate. These materials have been used extensively for the past several decades and perform admirably in low power conditions. However, in high power systems these materials will be destroyed, requiring a new means of producing phase masks. In this dissertation a method for producing robust …

Go to article

Analytical And Experimental Study Of Monitoring For Chain-Like Nonlinear Dynamic Systems, Bryan Paul Jan 2013

Analytical And Experimental Study Of Monitoring For Chain-Like Nonlinear Dynamic Systems, Bryan Paul

Electronic Theses and Dissertations

Inverse analysis of nonlinear dynamic systems is an important area of research in the eld of structural health monitoring for civil engineering structures. Structural damage usually involves localized nonlinear behaviors of dynamic systems that evolve into different classes of nonlinearity as well as change system parameter values. Numerous parametric modal analysis techniques (e.g., eigensystem realization algorithm and subspace identification method) have been developed for system identification of multi-degree-of-freedom dynamic systems. However, those methods are usually limited to linear systems and known for poor sensitivity to localized damage. On the other hand, non-parametric identification methods (e.g., artificial neural networks) are advantageous …

Go to article

Heat And Fluid Flow Characterization Of A Single-Hole-Per-Row Impingement Channel At Multiple Impingement Heights, Roberto Claretti Jan 2013

Heat And Fluid Flow Characterization Of A Single-Hole-Per-Row Impingement Channel At Multiple Impingement Heights, Roberto Claretti

Electronic Theses and Dissertations

The present work studies the relationship between target and sidewall surfaces of a multirow, narrow impingement channel at various jet heights with one impingement hole per row. Temperature sensitive paint and constant flux heaters are used to gather heat transfer data on the target and side walls. Jet-to-target distance is set to 1, 2, 3, 5, 7 and 9 jet diameters. The channel width is 4 jet diameters and the jet stream wise spacing is 5 jet diameters. All cases were run at Reynolds numbers ranging from 5,000 to 30,000. Pressure data is also gathered and used to calculate the …

Go to article

Vision-Based Sensing And Optimal Control For Low-Cost And Small Satellite Platforms, Bradley Sease Jan 2013

Vision-Based Sensing And Optimal Control For Low-Cost And Small Satellite Platforms, Bradley Sease

Electronic Theses and Dissertations

Current trends in spacecraft are leading to smaller, more inexpensive options whenever possible. This shift has been primarily pursued for the opportunity to open a new frontier for technologies with a small financial obligation. Limited power, processing, pointing, and communication capabilities are all common issues which must be considered when miniaturizing systems and implementing low-cost components. This thesis addresses some of these concerns by applying two methods, in attitude estimation and control. Additionally, these methods are not restricted to only small, inexpensive satellites, but offer a benefit to large-scale spacecraft as well. First, star cameras are examined for the tendency …

Go to article

Phase-Locking Stability Of A Quasi-Single-Cycle Pulse, Nathan Bodnar Jan 2013

Phase-Locking Stability Of A Quasi-Single-Cycle Pulse, Nathan Bodnar

Electronic Theses and Dissertations

There is increasing interest in the generation of very short laser pulses, even down to attosecond (10-18 s) durations. Laser systems with femtosecond pulse durations are needed for these applications. For many of these applications, positioning of the maximum electric field within the pulse envelope can affect the outcome. The peak of the electric field relative to the peak of the pulse is called the Carrier Envelope Phase (CEP). Controlling the position of the electric field becomes more important when pulse duration approaches single-cycle. This thesis focuses on the stabilization of a quasi-single-cycle laser facility. Improvements to this already-established laser …

Go to article

Mission Analysis For Pico-Scale Satellite Based Dust Detection In Low Earth Orbits, Jacob Belli Jan 2013

Mission Analysis For Pico-Scale Satellite Based Dust Detection In Low Earth Orbits, Jacob Belli

Electronic Theses and Dissertations

A conceptual dust detection mission, KnightSat III, using pico-scale satellites is analyzed. The purpose of the proposed KnightSat III mission is to aid in the determination of the size, mass, distribution, and number of dust particles in low earth orbits through a low cost and flexible satellite or a formation of satellites equipped with a new dust detector. The analysis of a single satellite mission with an on-board dust detector is described; though this analysis can easily be extended to a formation of pico-scale satellites. Many design aspects of the mission are discussed, including orbit analysis, power management, attitude determination …

Go to article

First Prev Next Last