Engineering Commons^™

Turbulent Effects On Building Pressure Using A Two-Dimensional Finite Element Program, Jonese Woods

Civil Engineering Undergraduate Honors Theses

Much of the knowledge about building aerodynamics today was obtained from physical testing like wind tunnel testing. Physical testing is time-consuming and very expensive. As a result, computational methods like the finite element method are being explored for use in building aerodynamics. Despite several years of research, there is still not a clear understanding of the peak pressure on buildings due to turbulence. Many of the research thus far has focused on comparing different computational methods. However, much work is needed in understanding the capability of the individual methods. In this work, a two-dimensional finite element program is used to …

Silver-Based Microbial Check Valve For Spacecraft Potable Water Systems, Rogelio E. Garcia

Chemical Engineering Undergraduate Honors Theses

As human space exploration increases, the development of a more efficient potable water treatment system suited for spacecraft becomes crucial. This Waste-management Education Research Consortium (WERC) challenge was designed to explore the viability of microbial control through the utilization of silver ions as a biocide for possible integration into the Tranquility Node 3 water purification system aboard the International Space Station (ISS). Current systems using iodine risk causing hyperthyroidism from overexposure; however, silver can be safely ingested without this side effect. After researching silver delivery methods including electrochemical ion production, controlled release, or a combination of the two, our team …

Vulnerability Analysis Of Modern Electric Grids: A Mathematical Optimization Approach, Matthew Millis

Industrial Engineering Undergraduate Honors Theses

Electrical power must be transmitted through a vast and complicated network of interconnected grids to arrive at one’s fingertips. The US electric grid network and its components are rapidly advancing and adapting to the advent of smart technologies. Production of electricity is transitioning to sustainable processes derived from renewable energy sources like wind and solar power to decrease dependence on nonrenewable fossil fuels. These newly pervasive natures of smart technology and the variable power supply of renewable energy introduce previously unexamined vulnerabilities into the modern electric grid. Disruption of grid operations is not uncommon, and the effects can be economically …

Volumetric Muscle Loss: The Role Of Physical Activity And Autologous Repair On Force Recovery And Signaling Pathways, Richard Perry

Graduate Theses and Dissertations

Volumetric muscle loss affects both military and civilian persons. The hallmark of this injury is incomplete muscle regeneration, excessive fibrosis, and chronic inflammatory signaling resulting in permanent functional loss. Since permanent functional loss drastically reduces quality of life, many studies have been conducted to improve force recovery. Current scientific literature considers a repair strategy of either devitalized scaffolds infused with growth factors or viable tissue plus activating factors to be the more promising interventions for optimal force recovery. PURPOSE The purpose of this study is to incorporate autologous repair and physical activity and observe the effects of muscle force recovery …

Feedforward And Feedback Signals In The Olfactory System, Srimoy Chakraborty

Graduate Theses and Dissertations

The conglomeration of myriad activities in neural systems often results in prominent oscillations. The primary goal of the research presented in this thesis was to study effects of sensory stimulus on the olfactory system of rats, focusing on the olfactory bulb (OB) and the anterior piriform cortex (aPC). Extracellular electrophysiological measurements revealed distinct frequency bands of oscillations in OB and aPC. However, how these oscillatory fluctuations help the animal to process sensory input is not clearly understood. Here we show high frequency oscillations in olfactory bulb carry feedforward signals to anterior piriform cortex whereas feedback from the aPC is predominantly …

Exploring The Compactability And Workability Of Rap, Elizabeth Poblete

Civil Engineering Undergraduate Honors Theses

Despite its economic and environmental benefits, the widespread use of Cold In-Place Recycling (CIR) is currently inhibited, to some degree, by a lack of laboratory testing and evaluation, specifically in the areas of compactability and workability of the reclaimed mixture stabilized with asphalt emulsion. The purpose of this study was to explore the influence of admixtures in CIR using modified Superpave Gyratory Compactor (SGC) compaction metrics. The primary stabilization technique considered in this research was asphalt emulsion, an application in which asphalt binder is suspended in water, allowing it to be stored and applied at ambient temperature, rather than the …

Tension Splitting Strength Of Bcsa Concrete Cylinders, Andrew Steven Deschenes

Civil Engineering Undergraduate Honors Theses

The focus of this research was to compare the tension splitting strength (TSS) of belitic calcium sufloaluminate (BCSA) cement concrete to tensile strength predicted by the American Concrete Institute (ACI) and to similarly proportioned portland cement (PC) concrete. BCSA is a rapid-setting cement with higher early strength, higher ettringite content, and lower calcium silicate hydrate (C-S-H) content than PC. PC and BCSA cement concrete cylinders were broken at different ages in both uniaxial compression and TSS. It was found that BCSA had a similar TSS to both the ACI prediction and PC TSS, but the results require further testing for …

Recovery Of Water And Salt From Hyper-Saline Mine Water Using Freeze Crystallization, Gabrielle Casey

Chemical Engineering Undergraduate Honors Theses

The Freezerbacks researched, designed, and economically evaluated a full-scale freeze crystallization process as well as two alternative full-scale processes: 5 stage multiple effect evaporation and reverse osmosis. All three processes were designed to treat hyper-saline mine water that was sent into evaporation pond systems. These systems were designed for Freeport-McMoRan’s mines that need to treat impacted water.

The Freeport-McMoRan copper mine in Miami, Arizona was visited in order to gain insight about the problem. The mine is no longer actively mining copper and is in the process of reclaiming land used. An essential part of restoring the land is treating …

Desalination: Freeze Crystallization, Ibrahim Guiga

Chemical Engineering Undergraduate Honors Theses

The Freezerbacks researched, designed, and economically evaluated a full-scale freeze crystallization process as well as two alternative full-scale processes: 5 stage multiple effect evaporation and reverse osmosis. All three processes were designed to treat hyper-saline mine water that was sent into evaporation pond systems. These systems were designed for Freeport-McMoRan’s mines that need to treat impacted water.

The Freeport-McMoRan copper mine in Miami, Arizona was visited in order to gain insight about the problem. The mine is no longer actively mining copper and is in the process of reclaiming land used. An essential part of restoring the land is treating …

Design Of Microporous Membranes For The Development Of Brain-On-Chip Devices, Andre Figueroa Milla

Biomedical Engineering Undergraduate Honors Theses

Traumatic brain injuries (TBIs) are a major global health concern that have an economic impact of $60 billion in the United States in related costs annually. Developing drugs for TBI treatment is an approach that currently faces limitations involving the permeability of the blood-brain barrier (BBB). The BBB naturally limits molecules from reaching the brain as a protective mechanism against disease, acting as a barrier during drug delivery. Understanding the BBB mechanically and chemically following a TBI could potentially assist future studies to alleviate the symptoms and long-term effects of TBI by pharmaceuticals. The Mechanobiology and Soft Materials Laboratory (MSML) …

A Bioinstrumentation Active Learning Educational Module: The Design Of A Working Temperature Sensor Using A Ntc Thermistor, Baylor Bush

Biomedical Engineering Undergraduate Honors Theses

The Department of Biomedical Engineering at the University of Arkansas has continued to develop over the years, with more students enrolling in the program each year. Within the first biomedical engineering course, Introduction to Biomedical Engineering, various topics are introduced to students, and the topic of bioinstrumentation has been one of the most complex and difficult topics for students to comprehend through just a few lectures. In order to aid students in grasping these intricate concepts, an active learning module was developed in which students can work in groups to build a simple thermistor circuit as a temperature sensor. The …

Autofluorescence To Study The Effects Of Acid Concentration On Cellular Metabolism In Vitro, Robin L. Raley

Chemistry & Biochemistry Undergraduate Honors Theses

Ultraviolet (UV) radiation-induced sunburns and their accompanying afflictions are a growing public health concern in the United States. There is a need for techniques that can accurately and non-invasively characterize the physiology of sunburned skin tissue directly after UV-damage and applying a topical skin treatment to relieve pain and promote healing. Two-photon excited fluorescence (TPEF) microscopy and fluorescence lifetime imaging (FLIM) can be used to investigate metabolic processes in live cells through endogenous fluorescence of the cofactors, NADH and FAD. These methods employ the optical redox ratio of FAD/(NADH+FAD), mean NADH lifetime, and the separation of the free and bound …

How Infant Positioning Impacts Hip Motion And The Associated Implications For Babies With Hip Dysplasia, Lauren Buchele

Biomedical Engineering Undergraduate Honors Theses

Developmental dysplasia of the hip (DDH) refers to a group of disorders, ranging from slight instability (Grades 1-3) to a severe dislocation (Grade 4) of the femoral head from the acetabulum [1]. In order to treat DDH in infants, a reduction procedure and the use of a lower body harness to secure the hip joint as the bones and ligaments re-form properly is typically prescribed. The Pavlik Harness is currently the “gold-standard” orthopedic device used to place hips in proper positioning. However, little research has been reported on the biomechanical affects during use of these device types.

Although the Pavlik …

Comparing The Effects Of Fibroblast Growth Factors On Growth Rate Of Human Fibroblast Cell Lines, Tasha Repella

Biomedical Engineering Undergraduate Honors Theses

Numerous studies have demonstrated the usefulness of growth factors in medium formulations to promote proliferation and viability of human fibroblasts in laboratory settings. However, due to the differences in the source and age of fibroblasts, the ability of growth factors like hFGF1 to promote proliferation varies. Equally difficult is the ability of hFGF1 to promote proliferation of diseased fibroblasts due to complexities associated with specific mitochondrial diseases. In this context, we decided to evaluate the potential for novel hyper stable growth factors super hFGF and hFGF1 (shFGF and hFGF1 respectively), to contribute to proliferation of different normal and diseased fibroblasts. …

Development Of A Model For Accelerated Fatigue Testing In Venous Valves, Olga Brazhkina

Biomedical Engineering Undergraduate Honors Theses

Malfunctioning venous cause issues ranging from cosmetic to life threatening situations for millions of people in the U.S. (1). Venous valve bioprosthetics often fail due to a loss in leaflet tissue flexibility following chemical fixation of donor tissue (2). A viable solution for testing venous valves prior to and post chemical fixation is in high demand for the development of a more durable prosthetic replacement. As a result, this research aims to create a fatigue apparatus that provides a means to model the durability of venous valves. The design criteria for this project included modeling physiological conditions in an accelerated …

Modeling And Validation Of Tissue Optical Properties In The Photon Transport Regime, Katelyn Heath

Biomedical Engineering Undergraduate Honors Theses

Early detection of changes in epithelial cells, such as the development of neoplastic formations seen in epithelial dysplasia, can indicate regions of the epithelial tissue that are at a high risk for cancerous formation. Using concepts from diffuse reflectance spectroscopy, a Monte Carlo model was developed to predict the reflectance measured by a detector at a small source-detector separation on a microendoscope. The Monte Carlo results were then used to calculate a mathematical relationship between the reflectance and distance that can be used to determine optical properties in a tissue sample. This model was validated with liquid phantoms of specified …

The Synthesis, Purification, And Characterization Of The P3 Peptoid, Myles Joyce

Chemical Engineering Undergraduate Honors Theses

The relatively young field of nano-systems has vast applications over various different fields. Peptoids (peptide analogues) and their uses are consistently investigated components of these nano-studies. A particularly interesting group of peptoids are able to self-assemble into secondary structures under the right conditions. The P3 peptoid is able to form microspheres if properly synthesized and purified. Microspheres are frequently studied due to their low surface area to volume ratios. This unique aspect of microspheres makes them an excellent candidate for drug delivery systems; however, these systems must also be robust so that the desired compound can be encapsulated within the …

Removal And Reuse Of Phosphorus As A Fertilizer From Cafo Runoff, Hannah Young

Chemical Engineering Undergraduate Honors Theses

Eutrophication is the process in which nutrient saturated waters promote algal blooms on the surface of the water. This limits the amount of dissolved oxygen content in the water, effectively limiting the range of species that can survive in a body of water. Concentrated animal feeding operations (CAFO) can contribute to this issue. The animals in a CAFO produce large amounts of nutrient-rich waste streams that can enter natural waterways if not properly managed and increase the problem of eutrophication. The ability to treat these waste streams and recover the excess nutrients would allow for not only the reduction of …

Effect Of Thiols For Nitrogen Reduction To Ammonia, Zakary R. Ford

Chemical Engineering Undergraduate Honors Theses

Ammonia is an important chemical used for fertilizers and also a potential carbon-free hydrogen storage medium. The Haber-Bosch process is the main production process, which requires large energy- and capital-input. Therefore, it is crucial to develop an alternate scalable synthesis that provides a less energy intensive and more economical route for synthetic ammonia production. In this paper, a 1Fe1Ni film was functionalized with C₃OH and C₆OH for the electrochemical synthesis of ammonia. This work will provide some insight into how thiol ligands can increase the selectivity of the catalyst for nitrogen reduction reaction and can be …

Modeling Of Electrochemical Processes At The Magnesium Anode During Struvite Formation, Tobias Dwyer

Chemical Engineering Undergraduate Honors Theses

This study analyzes the current transients observed during the electrochemical formation of struvite from a solution of ammonium phosphate using a pure magnesium and magnesium alloy electrode. Through converting the chronoamperometric data to chronocoulometric data and fitting the data to various models, the driving mechanisms for struvite nucleation were elucidated. While the pure magnesium anode is controlled by only instantaneous nucleation at the electrode, the AZ31 alloy is nucleation controlled at short times and Cottrell diffusion controlled at long times.

Recovery Of Water And Salt From Hyper-Saline Mine Water Using Freeze Crystallization, Clara Somerville

Chemical Engineering Undergraduate Honors Theses

The Freezerbacks researched, designed, and economically evaluated a full-scale freeze crystallization process as well as two alternative full-scale processes: 5 stage multiple effect evaporation and reverse osmosis. All three processes were designed to treat hyper-saline mine water that was sent into evaporation pond systems. These systems were designed for Freeport-McMoRan’s mines that need to treat impacted water.

The Freeport-McMoRan copper mine in Miami, Arizona was visited in order to gain insight about the problem. The mine is no longer actively mining copper and is in the process of reclaiming land used. An essential part of restoring the land is treating …

Effects Of Ambient And Laser Light On Water Evaporation From The Surface Of Polyurethane Swabs Doped With Surfactant, Collin Campbell

Chemical Engineering Undergraduate Honors Theses

Polyurethane swabs are a common instrument for environmental sampling in the food, medical, and forensic fields due to their high recovery of organisms like viruses, spores, and bacteria. For sampling microbes in food and medical facilities, storage of the collected samples occurs under the absence of light to promote growth for more accurate testing. In the forensic fields, microbial growth results in sample contamination so the inhibition of this growth requires the drying of the swabs. This work studies the evaporation rates of water from polyurethane swabs under zero watt incident light, 30 W fluorescent bulb, 50 mW 532 nm …

Recovery Of Water And Salts From Hyper-Saline Mine Water Using Freeze Crystallization, Miriam Gonzalez

Chemical Engineering Undergraduate Honors Theses

In the mining industry, usage of large volumes of water enables mines to conduct multiple processes within one location. Hypersaline brine waters exit the processes of the mine to be utilized for other roles; some of these roles include leaching, recirculation, and extraction operations. These waters are highly concentrated with salt components and are released to different sections of the mine. The salts of highest concentration in the brine are aluminum sulfate and magnesium sulfate heptahydrate, along with low concentrations of many other elements. There are multiple ways to recover purified water from the brine solution: freeze crystallization, evaporative processes, …

Task 1: Silver-Based Microbial Check Valve For Spacecraft Potable Water Systems, Eric Beitle

Chemical Engineering Undergraduate Honors Theses

As human space exploration increases, the development of a more efficient potable water treatment system suited for spacecraft becomes crucial. This Waste-management Education Research Consortium (WERC) challenge was designed to explore the viability of microbial control through the utilization of silver ions as a biocide for possible integration into the Tranquility Node 3 water purification system aboard the International Space Station (ISS). Current systems using iodine risk causing hyperthyroidism from overexposure; however, silver can be safely ingested without this side effect. After researching silver delivery methods including electrochemical ion production, controlled release, or a combination of the two, our team …

Silver-Based Microbial Check Valve For Spacecraft Potable Water Systems, Scott Perry

Chemical Engineering Undergraduate Honors Theses

As human space exploration increases, the development of a more efficient potable water treatment system suited for spacecraft becomes crucial. This Waste-management Education Research Consortium (WERC) challenge was designed to explore the viability of microbial control through the utilization of silver ions as a biocide for possible integration into the Tranquility Node 3 water purification system aboard the International Space Station (ISS). Current systems using iodine risk causing hyperthyroidism from overexposure; however, silver can be safely ingested without this side effect. After researching silver delivery methods including electrochemical ion production, controlled release, or a combination of the two, our team …

Surface Immobilization Of Terpyridine Compounds, Elizabeth Hallett

Chemical Engineering Undergraduate Honors Theses

The deoxydehydration (DODH) of polyols to alkenes is a promising method of producing high-value chemical feedstocks from biomass-derived materials. Current catalytic systems for DODH require the use of costly reducing agents that generate stoichiometric amounts of chemical waste. Immobilizing catalysts on electrode surfaces using chemical linking groups eliminates the need for sacrificial reductants. In this work, glassy carbon electrodes were modified with 4’-(3,4-dihydroxyphenyl)-2,2’:6’,2’’-terpyridine to investigate o-benzoquinone as a potential linking group for DODH, and possibly for other reactions. Previous studies involving electrodes modified with quinone-containing compounds have primarily been focused on catalyzing the oxidation of NADH; the nature or …

Removal And Reuse Of Phosphorus As A Fertilizer From Cafo Runoff, Kristin Moore

Chemical Engineering Undergraduate Honors Theses

Eutrophication is the process in which nutrient saturated waters promote algal blooms on the surface of the water. This limits the amount of dissolved oxygen content in the water, effectively limiting the range of species that can survive in a body of water. Concentrated animal feeding operations (CAFO) can contribute to this issue. The animals in a CAFO produce large amounts of nutrient-rich waste streams that can enter natural waterways if not properly managed and increase the problem of eutrophication. The ability to treat these waste streams and recover the excess nutrients would allow for not only the reduction of …

Scale Model And Flow Visualization Of Jack Rabbit Ii Chlorine Field Test, Charlotte Williams

Chemical Engineering Undergraduate Honors Theses

The release of hazardous gases, especially accidental releases, can have a major impact on the surrounding environment and population. The history of accidental hazardous gas releases is filled with plant destruction, civilian injury, and even death. Knowledge of how these gases travel and disperse once released can significantly lessen physical harm and improve emergency procedures. The Jack Rabbit II field test was conducted in pursuit of this knowledge for a chlorine release. In this field test, a purpose-built chlorine tank was surrounded by CONEX trailers assembled in the desert in Utah to model an urban setting. Multiple releases of chlorine …

Recovery Of Water And Salt From Hyper-Saline Mine Water Using Freeze Crystallization, Patsy Ann Dawson

Chemical Engineering Undergraduate Honors Theses

The Freezerbacks researched, designed, and economically evaluated a full-scale freeze crystallization process as well as two alternative full-scale processes: 5 stage multiple effect evaporation and reverse osmosis. All three processes were designed to treat hyper-saline mine water that was sent into evaporation pond systems. These systems were designed for Freeport- McMoRan’s mines that need to treat impacted water.

The Freeport-McMoRan copper mine in Miami, Arizona was visited in order to gain insight about the problem. The mine is no longer actively mining copper and is in the process of reclaiming land used. An essential part of restoring the land is …

Assessing Commonly Used Methods In Measuring Yield Of Cellulose Nanocrystals, Marilyn Pharr

Biological and Agricultural Engineering Undergraduate Honors Theses

Cellulose is a ubiquitous, renewable biopolymer found in plants that can be broken down to isolate cellulose nanocrystals (CNCs). CNCs have been utilized in various applications that include biomedical technology, structural composites, and barrier films because of their unique mechanical, optical, and physicochemical properties. CNCs can be produced by a variety of approaches from cellulosic materials; however, strong acid hydrolysis is the most common and effective technique as it results in stable colloidal suspensions. Existing literature reveals a wide range of CNC yields, depending on the production process, raw material used, and the method of yield estimation. The yields of …